Used Fz 0 for sale (88,081)

Condition: used, Gear motor, electric motor -Speed: 62 rpm -Power: 0.75 kW Hedpec U Tzxjfx Aahjp -Construction: B5 -Diameter shaft: Ø 25 mm -Protection class: IP 44 -Dimensions: 430/160/H200 mm -Weight: 16.7 kg

Condition: used, Power resistor, wire potentiometer, resistor, braking resistor, solid tube resistor -Manufacturer: Frizlen, power resistance -Type: FZDPQ 200x35 Hodpfefmldujx Aahsp -Power: 450 W 4.0 ohms -Dimensions: 250/140/100 mm -Weight: 1.7 kg

Condition: new, die cushion stroke: 200 Hedpfxed Ab Ikj Aahep

Condition: new, die cushion press capacity: 30die cushion returning speed: 52die cushion stroke: 200daylight: 750pressure: 150stroke: 500 Hodpfxsd Ab Ilj Aahep

Condition: new, drilling on table: 120die cushion returning speed: 52die cushion stroke: 200die cushion press capacity: 30motor power: 11retracting speed: 165working speed: 8,5rapid traverse: 100daylight: 750pressure: 100tappet measurements: 900 x 600table diamension: 1100 x 700messurements (LxWxH): 2.180 x 1.600 x 3.350weight approx.: 9300total power requirements: 11stroke: 500 Hjdpfx Aed Ab Imeahjp

Condition: good (used), Year of construction: 1992, DC motor, geared motor, electric motor, DC geared motor Hjdpfsb A Ngxex Aahjp -Speed: 200/2000-3000 rpm -Power: 3.2 kW -Speedometer -Design: B3 -Shaft diameter: Ø 50 mm -Protection class: IP 44 -Number: 1x motor available Price: per piece -Weight: 220 kg

Condition: good (used), Year of construction: 1992, DC motor, geared motor, electric motor, DC geared motor -Speed: 200/2000-3000 rpm -Power: 3.2 kW Hjdpeb A Ixzofx Aahop -Speedometer -Design: B3 -Shaft diameter: Ø 50 mm -Protection class: IP 44 -Weight: 220 kg

Condition: good (used), Time relay, relay, heating current monitoring, contactor, semiconductor contactor, contactor Hjdpfxsb A Izzj Aahsp -Type: FZR/220 AC/1 -0.05 s-1s Price: per piece -Quantity: 5 available -Weight: 0.2 kg

Condition: good (used), Year of construction: 1986, DC motor, geared motor, electric motor, DC geared motor Hedpfxsb A Ixae Aahep -Speed: 200/2000-3000 rpm -Power: 3.2 kW -Design: B3 -Shaft diameter: Ø 50 mm -Protection class: IP 44 -Weight: 220 kg

Condition: good (used), Zwick Hodpow Ib Uwsfx Aahsp Type: BT2-FZ0.5TS.D16 500 N + Xforce P 500N Materials Testing Machine Test force in tension/compression: 500 N Overall height, without head traverse: 789 mm Overall width: 411 mm Overall depth: 622 mm Footprint: Net standing area: 0.008 m² Load frame base area: 0.196 m² Specific floor load: Based on typical equipment: 0.85 kg/cm² With 50% safety margin: 1.28 kg/cm² Ceiling load: Based on typical equipment: 97 kN/cm² With 50% safety margin: 146 kN/cm² Working space depth: 105 mm Working space height with upper mounting bracket: Minimum height: 235 mm Maximum height: 565 mm Working space height with lower mounting bracket: Minimum height: 90 mm Maximum height: 420 mm Weight: approx. 78 kg with extras Condition: used Scope of delivery: (see picture) (Changes and errors in technical data and specifications are reserved!) We are happy to answer further questions by phone.

Condition: new, Year of construction: 2012, total length: 2,780 mm, Tugger Baka EFZ-5,0 Drive Electric Hedpfoxd Ea Uex Aahjp Year built 2012

Condition: used, Year of construction: 2014, total length: 4,100 mm, Tugger Hjdpfxjxd Ey Uo Aahsp Volk DFZ 120H Drive Diesel Year built 2014

Condition: new, functionality: fully functional, New ZF (EK, EKR, EB-ER, EK-ER), Stromag (EKE, EDE, EKN, EFL, EMD, ELN), Heid (FOV, FZV, FMV, MMZ, FMOB) and other clutches available from the biggest European stock. Hedovq Nllspfx Aahep The most popular brands which we have in continuous sale, are: ZF, Heid, Stromag, Ortlinghaus, Binder Magnete, Ema Dessau, Fumo, PSP Pohony, Telcomec, Warner, Monninghoff, Shinko, but also many other unique positions. We offer: clutches and brakes: electromagnetic multidiscs, toothed, mechanical and hydraulic; accessories: driver cups, plates (steel, sintered steel), levers, brush-holders, assembly sets, brushes. We operate efficiently because we know that in a crisis situation, the quick response is the most important thing. Are you looking for an electromagnetic clutch or brake? Our staff will help you to find it, and in case of items which are not longer in production, they will find a best replacement for you, or will offer a regeneration.

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,400 mm, travel distance Z-axis: 1,500 mm, table length: 6,000 mm, table width: 3,000 mm, spindle speed (min.): 3,000 rpm, A CNC portal milling machine FKD-Feichter with double column is available. Travel range X/Y/Z/W: 6000mm/4800mm/1500mm/1300mm, table dimensions X/Y/Z: 6000mm/3000mm, max. workpiece weight: 115,000kg, max. table load: 6,400kg/m², total machine bed length: 14,500mm, portal dimensions X/Y: 3,000mm/4,400mm, C-axis: 360°, A-axis: +/-120°, ram section: 700mm/700mm, feed rate: 10m/min. Total system dimensions X/Y/Z: approx. 15,100mm/6,100mm/7,000mm, total system weight: approx. 115,000kg, control system: Heidenhain. Includes chip guard, coolant system, and hydraulic unit. The machine was built at the site in 2022. The ram and spindle have been freshly overhauled. Documentation is available. On-site inspection is possible. Immediately available. Hodpoxp Rgksfx Aahop Three heads: Fork milling head with A-axis, 90-degree angular head, spindle extension – straight head, tool holder SK 50.

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, For sale: this gear hobbing machine. Wired and ready for testing. Comes with extensive accessories. Technical specifications: Maximum gear diameter: 7,100 mm Gear width: 1,500 mm Hedpfx Aexwlthoahep Maximum module: 45 Table diameter: 4,000 mm Hob diameter x width: 400 x 500 mm Maximum helix angle: 45 degrees Planing cutter diameter: 500 mm Planing cutter speed: 9–63 rpm Total power consumption: 47 kW Machine weight: 160,000 kg

Condition: used, Year of manufacture 2003 Hodpfx Aajw Upn Eehop 2.2 kW 3.0 HP including documentation, COC

Condition: used, functionality: fully functional, power: 4 kW (5.44 HP), gearing type: hydrostat, fuel type: gasoline, color: orange, number of seats: 1, Year of construction: 2002, Road Marking Machine: Hedpfx Aew T Skgoahsp + Graco + LineLazer II 5900 + Airless pump + Spray gun + Line guide + Bead dispenser + Honda GX160 engine, 5.5 HP + Year of manufacture: 2002 LineDriver: + Green + Zindel Variozet 3 + Honda engine with electric start + Hydrostatic drive + Hand throttle Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: used, Year of construction: 2000, functionality: fully functional, Trimming line consisting of: centering table H42 (factory-overhauled EWD 2000), chipper canter FZ 3 (factory-overhauled EWD 2000), converted to servo cylinder; infeed BNK with square timber centering, BNK 200/6, year of manufacture 2000; board separator ASV, year of manufacture 2000; hydraulic unit; central lubrication. Without electrical control equipment. Dismantled, chipper canter and BNK stored in the hall. Hsdpfxsx Tpzds Aahjp

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 1 kg, number of slots in tool magazine: 12, controller manufacturer: Fanuc, controller model: 21m 3x / 2x 21iM, coolant supply: 1 bar, number of spindles: 1, rapid traverse Z-axis: 60 m/min, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rotational speed (max.): 10,000 rpm, workpiece diameter (max.): 63 mm, Equipment: documentation/manual, rotational speed infinitely variable, 7 units CHIRON FZ08S with 4th axis Peiseler AWU P100 Hjdpfxjvx Ugws Aahjp 3 machines were overhauled by Chiron CMS in 2016 and 4 machines in 2018, unit price approx. €30,000 each.

Condition: used, Year of construction: 2001, machine/vehicle number: 001048, - Manufacturer: Unisanding - Type: 2.2.0. 0-30 - Working width: 1300mm - Year of manufacture 2000 - 2 rollers flexibly adjustable from 0-30 ° working from above Hedpfx Aaextakmjhjp - Flex-Trim special brushes - Vacuum belt with vacuum motor - With glass pane on the operating side - External control panel with LCD control - Grinding motors: 2 x 2.2 kW with thermal contact - Feed motor: 1 x 1.5 kW with thermal contact - Vacuum motor: 1 x 5.5 kW - Height axis rollers: 1 x 0.18 kW - Feed 2-10 m/min frequency controlled - Brush speed: 50 - 350 rpm, frequency controlled - Voltage: 3 x 400V, 50Hz - El. Power 15KW - Fuse: 63A - Exhaust air volume (vacuum) 3,000 m³/h - Dust extraction volume: 2,000m³/h – 5,000m³/h depending on the customer - Length: 2,170 mm - Width: 2,040mm - Height: 2,030 mm - Weight with control cabinet: 2220 kg - Color: RAL 7035 light gray - Operating side: left to right - Ex version: No - Location: at the Blomberg warehouse

Condition: used, Hydraulic Power Unit, Hydraulic Supply Unit, Rexroth ABHAG-4503-0-C, Used Machine Manufacturer: Rexroth Model: ABHAG-4503-0-C Pump: Rexroth A10VSO Type: Axial piston pump With pressure-flow controller, maximum operating pressure: 280 bar Dimensions: 900 × 900 × 1350 mm Tank capacity: 160 liters Weight: 400 kg Year of manufacture: 2016 Electrical data: 400 V; 5.5 kW; 10.5 A Hsdpfxoyuzino Aahep

Condition: ready for operation (used), Hydraulic Power Unit, Hydropack, Rexroth, Used Machine Manufacturer: Rexroth Type: 057-AHAG-G714-0-4-A Dimensions: 870 x 750 x 1570 mm Tank Capacity: 160 liters Pump Type: Rexroth PV7-1A/16, 160 bar Electrical Data: ABB Motor 380-420/220-240 V; 50 Hz; 1.2/2.1 A Number of Valves: 14 pcs Type: REXROTH 4WE 6 D53/OFAG24NK4 Solenoid 4-way DN6 connection Hsdpfxsv Dgtmj Aahsp 24 V DC

Condition: good (used), Year of construction: 2010, Manufacturer: NEUHÄUSER Type: 2.224-0 Year: 10/42 Inclusion dimensions: 8500 x 1000 x 630 mm Electrical data: 220/480 V; 8.6/4.95A; IP 54 Discharge height: 630 mm Delivery length: 8100 mm Hedpjnqyx Ejfx Aahep Shipping width: 650 mm

Year of construction: 2007, condition: used, Manufacturer: Solev (Clauger) Model: RH 550/230-25U-0-RS-SP-2G/1F Year : 2007 Type : glycol water heat controller / Thermal skid Hodpfx Ajzg Nbhsahjp Class : ATEX - EX II 3 G - EEx b,c,d,e II B T2 Minimum / maximum temperature : +20°C / +230°C Intensity: 51 A. Heating: 25 kW immersion heater Heating control by thyristors. Cooling: No cooling system. Heat transfer fluid: Therminol 66 Regulator type 2704 single loop from EUROTHERM Centrifugal electric pump unit giving a flow rate of 26 m3/H Motor: 4 KW. ALWEILLER NBT32-160/01/149 pump Filling volume : 69 L - 246 L Documentation available Sold with protective cover.

Condition: used, machine/vehicle number: 008324, Max. panel width: 1000 mm Hodpfx Aajx Hpkrehop Max. panel length: 2500 mm Length of conveyor: 7000 mm Panel return for edgebander: Right