Used Fume Cupboard for sale (494)

Condition: used, functionality: unexamined, machine/vehicle number: V250 (Bofa) | WLA250 (Weidinger), input voltage: 230 V, Used solder fume extraction units from Bofa & Weidinger Nedpoxp H Ttofx Abgodd Model: V250 (Bofa) | WLA250 (Weidinger) Voltage: 230V (50Hz) | 1.1A Including power cable.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, DFPRO6-Cyclo 400-600 volt 7.5 kW 2007 Price: €3,000 Ndjdpfxjxcgw Ss Abgjd DFPRO16-Cyclo 400-690 volt 18.5 kW 2008 Price: €4,000 3DFP9-SPRK 3x400 volt 11 kW 2018 Price: €8,500 2DFP6 3x400 volt 7.5 kW 2018 Price: €6,500 Price for all 4 units together: €20,000 Available for demonstration under power due to insolvency

Condition: excellent (used), Welding fume extraction Make: Kemper Model: Vacu Fil 500 Year of manufacture: 2/2016 Airflow: 500 m3/h Supply voltage: 400 Volt 12.9 amperes 5.5 kW Accessories: unused spare filter cartridge Njdpfx Abexk Uxaegjdd Transport dimensions: Length: 1200 mm Width: 660 mm Height: 1400 mm Weight: 250 kg

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1502000011, overall weight: 95 kg, volume flow: 1,100 m³/h, power: 1.1 kW (1.50 HP), Has seen very little use. WxLxH: 760x760x970+length of exhaust arm Nedoww Ugtepfx Abgjdd

Condition: used, Year of construction: 2014, Exhaust fan model: HERDING COMP 1500-8/9 SB – 4 identical units Nodpfx Aewu Dnbebgodd Year of production: 2014 good condition Price: 5,000 euros/unit

Condition: used, Welding fume extraction, filtration unit, dust extraction by LINCOLN NORWELD Central extraction system, extraction plant, silo filter, cartridge filter, pulse jet filter, dedusting filter Type FU-80-A Serial no. 001799 Year of manufacture: 1996 Airflow rate max. 6000 m³/h (depending on fan capacity) Filter area 80 m² (4 units of 20 m² each) Extraction inlet at filter entry Ø 250 mm Exhaust outlet at filter exit Ø 250 mm Compressed air connection 4 bar - without fan, without filter control - Filter category C, 99.9% separation efficiency - Pneumatic filter cleaning - Filter inlet with pneumatic shut-off valve - 4 used filter cartridges, Ø 325 mm, length 1200 mm - Service access hatch 240 x 240 mm Space required (L x W x H): 1400 x 1600 x 2970 mm Weight: approx. 300 kg In good condition Ndodoxf Up Ijpfx Abgjd

Condition: like new (used), functionality: fully functional, Equipment: type plate available, Dust Hog Duster SG 801-100 dust extraction system in mint condition. Ndodpfx Ajv Iyybebgsd The system was only used once for a test run; otherwise, it is unused and in excellent condition. Power: 1.5 kW Flow rate: max. 800 m³/h Pressure: 1,940 Pa Pneumatic filter cleaning Connection diameter: 200 mm Shipping available for €120. #8095

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: Airtower, overall weight: 1,480 kg, total width: 1,756 mm, total height: 3,643 mm, Fan power: 3 x 3.9 kW Motor: 400V 50Hz Weight: 1,480 kg Year of manufacture: 2017 Operating hours: 14,783 h Ndedpfxsv N U Tlj Abgod 2 identical Airtower units available, price is per unit.

Condition: good (used), Year of construction: 2013, functionality: fully functional, type of input current: three-phase, overall weight: 800 kg, Plymovent Diluter – Welding Fume Extraction System The Plymovent Diluter is a stand-alone air purification unit specifically engineered for welding workshops. Unlike traditional ducted ventilation, the Diluter recirculates and cleans air within the workshop, eliminating the need for external ducting. Clean, filtered air is discharged horizontally from overhead modules, establishing an optimal airflow pattern that continuously dilutes and removes welding fumes from the operators' breathing zone. Key specifications & features: - Airflow capacity: specifically designed for medium to large-scale welding workshops - Installation: Stand-alone unit – no ducting or complex extraction system required - Filtration: Fitted with high-efficiency filter cartridges, replaced at prescribed intervals - Operation: Automatic fan control with uniform horizontal air distribution - Maintenance: Serviced by the official importer, regular filter replacement ensured - Construction: Robust industrial-grade build suited for continuous operation Njdpfx Asxf Iqrjbgsdd Benefits: - No investment needed for expensive ductwork or ventilation installation - Ensures a healthier and cleaner working environment for welders - Compact footprint, easily integrated into existing workshop layouts - Supported by Plymovent’s expertise – a Dutch manufacturer specializing in welding fume extraction systems globally The offered unit is in excellent condition, fully serviced, and ready for immediate use. Filters were changed one month ago.

Condition: new, 6 St. Ndjdpfx Abow U U Rfsged 100 kg range L-W-H 705 x 736 x 1019 mm weight 126 kg Furnishing: - Tool cabinet with 6 drawers / ball bearings 75 - 125 - 150 - 150 - 200 - 200 mm - drawer extension 88% - Usable dimensions inside: 600x600 mm - lockable

Condition: good (used), Year of construction: 1997, machine/vehicle number: 0001, Offer 24587 Technical data: - Electrostatic filter with control light - Exhausted and cleaned air is recirculated to the work area - Wall-mounted version with two jointed extraction arms Ndodpfx Aown Egrjbgjd - Jointed arm length approx. 9000 mm - Air volume flow approx. 4700 m³/h - Active filter surface 9.2 m² - Drive - Fan 400 V / 0.75 kW - Space requirement approx. W 700 x H 1600 x D 550 mm - Weight approx. 120 kg

Condition: new, Year of construction: 2025, functionality: fully functional, FM300 extractor is a simple machine for extracting chips and sawdust. Capability of quick bag replacement and portability due to the wheeled base make our extractor very practical. Additionally, absorber's metal rotor ensures quiet operation. Despite providing such great features as failure-free operation and high efficiency, it is very affordable. Metal balanced rotor ensures vibration-free and quiet operation Quickly mounted BURLAP extraction bag 4-wheeled base makes it portable Stable, metal construction Default equipment Y-shaped extracting connector, 2×100 Metal wheeled base Technical data Suction efficiency 2530 m3/h Ndedpfx Aovu Atwjbgjd Engine speed 2850 rpm Bag capacity 150 L Number of bags 2 Extracting connector diameter 1×130, 2×100 mm Dimensions (L×W×H) 940×510×1960 mm Weight 56 kg Motor power 1.5 kW Power supply 3-phased, 400V EC declaration yes

Condition: used, Spray enclosures, Paint fume, Used equipment Manufacturer: Kematechnik Type: IM-SZ-1,5-4000 Overall dimensions: Width: 1500 mm Depth: 2550 mm Nsdjw Tt Tvspfx Abgodd Height: 2230 mm Year of manufacture: 2017 Airflow capacity: 4000 m³/h Motor power: 2.2 kW

Condition: good (used), Year of construction: 2016, operating hours: 6,041 h, suction capacity: 4,000 m³/h, negative pressure: 3,000 Pa, Dust extraction, welding fume extraction, self-cleaning, pneumatic, vacuum cartridge filter for plasma, laser, sandblasting, soda blasting, shot blasting and all types of dry dust. Brand: TEKA Model: Filtercube 2H Year of manufacture: 2016 Operating hours: 6041 Filter cleaned with a microprocessor controller with compressed air pulses during operation, which ensures high efficiency of the device. Low demand for compressed air thanks to the "Power-Spray" system The central Filtercube filter ventilation device equipped with cartridge filters is an ideal solution for almost all problems in the area of fume and dust filtration. Nodpfx Abjtpvcyogsdd Fan on the clean side, which reduces the risk of explosion to a minimum. Application: central exhaust system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables system for general filter ventilation of the hall (push-pull system, displacement system) extraction system in combination with an exhaust table extraction system for grinding non-explosive materials Parameters: Fan in a sound-absorbing enclosure with a power of 3 kW. Capacity 4000 m3/h Negative pressure 3000 Pa Inlet diameter: 315 mm Filtration surface: 50 m2 control cabinet technical documentation Possibility to order new filter inserts tailored to the customer's needs.

Condition: new, Year of construction: 2024, The OS 3008 welding extractor is ideal for extracting smoke and fumes generated during welding, polishing, cutting or grinding rare precious metals. It can purify large amounts of harmful metal particles suspended in the air. This machine is characterized by high purification efficiency, low noise emission and takes up a relatively small area. It is adapted for extraction during arc welding, carbon dioxide, MIG/MAG method, gouge arc, welding in the gas environment. Suction power: 3000 m^3/h These extractors are equipped with high-performance filter inserts, distinguished from conventional filters by the presence of a PTFE (Polytetrafluoroethylene) membrane layer. In conventional filters, the length of the fibers of traditional filter materials such as cotton, satin, paper and other cellulose fibers is from 5 to 60 µm. Soot particles contained in the extracted smoke can remain inside the filter, blocking the filter element. When the blockage becomes too large, the ash cannot be effectively removed from the filter element, the air resistance increases and the gas flow decreases. As the filter becomes more contaminated, the filtering efficiency drops dramatically. Our filter contains a PTFE membrane layer, the fine structure of which blocks microscopic dust particles. These particles block the dust layer on the surface of the filter material. Most of the dust particles are blocked on the outer surface of the filter, not penetrating the filter interior. Over time, the particles can be removed from the filter by the flow of purified, compressed air. Air volume (m^3/h) 3000 Pressure (Pa) 2000 Filter efficiency (%) 99.9 Power (kW) 3 Filter area 30 Filter size 700 x 750 x 1700 mm Voltage (V) 380 Weight (kg) 90 Ndodpfxetu H N Ho Abgjd

Condition: used, Year of construction: 1988, Welding fume extractor Fabr.ESTA Type:SRF - 2000 Year 1988 Ready for use. Nsdou Hlppjpfx Abgsdd

Condition: used, Extraction system, central extraction system, room air filter system ETS Efficient Technical Solutions GmbH Central welding fume extraction system Year of construction approx. 2005 Volume flow approx. 5000 m³/h Extraction connection at filter inlet 1200 x 150 mm Exhaust air connection at filter outlet 400 x 300 mm Motor power 10 kW Mains connection 400 Volt, 50 Hz - Control cabinet for wall mounting - Pocket filter Nodpfx Absicic Hjgodd - Maintenance flap for filter change - Radial fan on top of the unit Space requirement L x W x H 2000 x 1650 x 3650 mm Transport height without fan 3100 mm Weight approx. 2000 kg Very good condition

Condition: new, Year of construction: 2025, functionality: fully functional, All CORMAK company extractors feature easy operation and quick bag replacement. Wheeled base ensures portability. Extractor's quiet and failure-free operation is provided by a metal rotor. Affordable price with high efficiency. Metal balanced rotor ensures vibration-free and quiet operation Quick mounting of burlap extraction bag Portability due to 4-wheel base Stable metal construction Default equipment Metal wheeled base 4 burlap bags Nedpfxsvu A Dis Abgjdd Optional equipment Galvanised clamping ring 2-micron filter cartridge Technical data Suction efficiency 3900 m3/h Bag capacity 220 L Number of bags 4 Extracting connector diameter 1×150, 3×100 mm Dimensions (L×W×H) 1200×570×2250 mm Weight 64 kg Motor power 2.2 kW Power supply 3-phase, 400V User manual yes EC declaration yes

Condition: used, Year of construction: 2011, filter area: 418 m², suction capacity: 14,000 m³/h, negative pressure: 3,600 Pa, Dust extraction, welding fume extraction, self-cleaning, pneumatic, vacuum cartridge filter for plasma, laser, sandblasting, soda blasting, shot blasting and all types of dry dust. Ndodpfxjwiuaqs Abgod Brand: VALCO Model: PPX-18-W3 Thanks to the W3 approval, the filter in this version can be used when welding high-alloy steels. The filter is cleaned with compressed air pulses during operation, which ensures high efficiency of the device. The fan is on the clean side, which reduces the risk of explosion to a minimum. Parameters : Efficiency - 14000 m3/h Negative pressure - 3600 Pa Filtration area - 418 m2 Cartridge filter inserts - 18 pieces Fan - 15 Kw Inlet diameter - 450 mm total length - 2.80 m total width - 1.35 m height - 4.00 m Device from 2011 Full technical documentation available. There are 2 pieces of this device available. Stock no.: 0986 1/2

Condition: used, Welding fume extraction unit for wall mounting, KEMPER extraction device Type 85400 Serial number: 279092 Year of manufacture: 1997 Volume flow: 1700 m3/h Static pressure: 2000 Pa Extraction connection: Ø 250 mm Motor power: 1.5 kW Power supply: 400 Volts, 50 Hz - Radial fan - Designed for a mechanical air filter with approx. 99% separation efficiency - Main filter defective (surcharge for new main filter: EUR 195 net) - Articulated extraction arm Ø 150 mm, approx. 2 meters long - Extraction pipe with 3 joints and extraction hood (adapter connection to filter housing missing) - No external control unit, without filter monitoring, without start switch - Air outlet: 250 x 140 mm Required space (L x W x H): 680 x 660 x 1100 mm Weight: approx. 120 kg Good condition Nsdpfou S Tfgex Abgsdd Surcharge for new main filter: EUR 195 net

Condition: new, functionality: fully functional, Year of construction: 2025, All CORMAK company extractors feature easy operation and quick bag replacement. Wheeled base ensures portability. Extractor's quiet and failure-free operation is provided by a metal rotor. Affordable price with high efficiency. Metal balanced rotor ensures vibration-free and quiet operation Quick mounting of burlap extraction bag Portability due to 4-wheel base Stable metal construction Ndedpfevu Artsx Abgjd Standard equipment Metal wheeled base 4 burlap bags Optional equipment Galvanised clamping ring 2-micron filter cartridge Technical data Suction off efficiency 3900 m3/h Bag capacity 150 L Number of bags 4 Extracting connector diameter 1×150, 3×100 mm Dimensions (L×W×H) 1400×570×1960 mm Weight 64 kg Motor power 2.2 kW Power supply 3-phase, 400V User manual yes EC declaration yes

Condition: used, Filter system - extraction system, central extraction Cartridge - pulse filter VALCO type Pidclean 4N Central welding fume extraction system Series. No.: 15003 Year of construction 2003 Nodpfx Abomquwqsgjdd Volume flow max. 3500 m³/h Filter area 92.8 m² Differential pressure 700 Pa Suction connection at filter inlet Ø 250 mm Exhaust air connection at filter outlet 225 x 160 mm Compressed air requirement 4 to 6 bar Motor power 5.5 kW Mains connection 400 Volt, 50 Hz - AUTEL filter control unit, type Eco S6 - Pneumatic filter cleaning, automatic via control unit - 4 cartridge filters Ø 350 x 660 mm - Maintenance flap for filter change - Radial fan on top of the system - Removable dirt collection container approx. 40 liters - Silencer for fan outlet, Ø 250 mm - Electrical diagram and operating instructions for the control unit available Space requirement L x W x H 2150 x 1350 x 2560 mm Weight approx. 550 kg Good condition

Condition: new, Year of construction: 2025, functionality: fully functional, New, FM230-L1 low-noise vacuum extractor. Large design and powerful vacuum allows for removing sawdust and chips from machines and floors. Machine features Extractor with a powerful vacuum (horizontal system rotor) Metal, balanced rotor Strengthened motor Workplace vacuuming capability Large bags capacity Wide suction nozzle in the set Portable due to large wheels Ergonomic handle for machine manoeuvring Quiet work, high efficiency Due to its small size it doesn't take a lot of space in the workshop Many years of our team's effort resulted in creating a WhirlWind series multi-wing metal rotor, which, along with the rigid metal body, constitutes the heart of the extractor. Vacuum air-flow perfectly sucks out excess amount of sawdust produced during machining wood. Large design of the extractor is equipped with a solid frame providing stability and vibration-free operation. Entire construction is also strengthened with appropriately thick supports, which hold the cylinders along with the weight of the waste bags in proper position. Another advantage is the usage of an elastic and durable gasket, located in the integral part of the machine in order to improve the tightness of the entire system. By default, our extractors are equipped with burlap (filtering and waste) as well as additional, disposable, durable, plastic waste bags. Elastic metal bands ensure long-term reliable bags replacement. Usage of rotary wheels in bearings provides quick relocation of the machine. Technical data Ndjdpfjvu A Eaox Abged S1 continuous work motor power 0.75 kW Speed 2800 rpm Suction efficiency 1150 m3/h Bags capacity 90 L Number of bags 2 Extracting connector diameter 100 mm Height 1550 mm Width 420 mm Length 800 mm Voltage 230V Weight 27 kg

Condition: new, Year of construction: 2025, functionality: fully functional, All our extractors feature easy operation and a possibility of quick bag replacement. Wheeled base ensures portability. Metal rotor ensures silent and failure-free extractor operation. Affordable price in comparison to machine's efficiency. Metal balanced rotor ensures vibration-free and quiet operation Quick mounting of the burlap extraction bag Stable metal construction Default equipment 6 burlap bags Technical data Suction efficiency 4860 m3/h Bags capacity 3×200 L Number of bags 6 Extracting connector diameter 1×180, 4×100 mm Dimensions (L×W×H) 2355×590×2150 mm Ndodpfxevu Rx Ie Abgsd Weight 125 kg Motor power 3.8 kW Power supply 3-phase 400V User manual yes EC Declaration yes

Condition: new, Year of construction: 2025, functionality: fully functional, Vacuum air-flow perfectly sucks out excess sawdust produced during machining wood. Extractor equipped with an extracting connector rotary 180°. Machine features For chips from milling machines, planers and saws Nsdpfx Absvu Aykjgjdd High suction power Easy relocating due to the drive system Rotor and metal body Quick attachment system for filter and bag Extracting connector can be rotated 180° simplifying attaching suction hoses Technical data Engine 1.5 kW/400V Speed 2850 rpm Bags capacity (Diameter / Length) 190 L (500 mm / 1100 mm) Maximum efficiency 3200 m3/h Intake connector 150 mm/ 3×100 mm Rotor diameter 300 mm Dimensions 985×560×2210 mm Weight 45 kg