Used Free for sale (12,030)

Year of construction: 2005, condition: good (used), functionality: fully functional, machine/vehicle number: 05071232191, For sale is our Seho wave soldering system (without tin). Model: MWS 2340. Condition: very good and fully functional. Includes fluxer, 2 x lifters, corner transfer unit, 8.50 m conveyor section, 1 x solder pot, 2 x pump drives, 2 x solder waves. Wave type: Wörthmann 3/5. The soldering system can still be inspected in operation for a few more weeks. Only defect: small cracks on the panel in photo no. 4. Dcjdjw Rl S Ejpfx Ac Nsc

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, overall weight: 3,000 kg, total length: 25,400 mm, total width: 1,600 mm, total height: 2,000 mm, power: 165 kW (224.34 HP), volume flow: 1.56 m³/h, noise level: 65 dB, Equipment: documentation/manual, type plate available, Continuously serviced, excellent condition. Atlas Copco ZR160 VSD screw compressor With speed-controlled drive, adsorption dryer MD400 Compressor: Manufacturer: Atlas Copco Type: ZR 160 VSD Max. operating pressure: 8.6 bar Variable speed drive Cooling water consumption 2.1 liters/s Air supply: 27 m3/min Water cooled Oil free Power: 163 kW Djdpfxern S Hpj Ac Nocc Year of construction: 2002 Uptime: 122499 Last service: September 20, 2002.3. Refrigerator: Manufacturer: Atlas Copco Type: MD 400 W Year of construction: 2002 Max. operating pressure: 10.5 bar Empty volume: 199 l

Condition: excellent (used), Year of construction: 2017, operating hours: 36,000 h, functionality: fully functional, overall weight: 1,890 kg, total length: 2,200 mm, total width: 1,420 mm, total height: 2,050 mm, motor manufacturer: Garden Denver, power: 75 kW (101.97 HP), fuel type: electric, volume flow: 684 m³/h, operating pressure: 10 bar, type of cooling: water, Equipment: type plate available, Oil-free screw compressor PUREAIR Compair D75HRS 10A 75kw 10 bar 11.4m3/min with frequency converter CompAir D75HRS-10 oil-free, water-injected, Dryclon series frequency converter screw compressor With its 75 kW engine power, it reaches a capacity of 10,320 l/min. The 10 atmosphere operating pressure ensures stable and clean compression, making it ideal for use in areas where air cleanliness plays a key role. COMPAIR D75HRS screw compressor fully serviced, for sale in excellent condition oil-free design, direct drive, controlled by frequency converter. Regulated speed - air and water cooled 75 kW power, air flow: 11.4 m3/min /684 m3/h Dcodpfx Aow Rcgtsc Nsc Built-in frequency converter: Manufacturer: Compair D75HRS 10A Year of manufacture: 2017.12 hours: 36000 Drive power: 75 kW Pressure 10 bar Flow rate: 11.4/min Delco XL controller Main rotor speed: 2980 Voltage: 400 V 50 Hz 3 phase current consumption: 128 A Machine weight: 1890 kg Dimensions: 225 long 142 wide 205 high. If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: like new (used), Year of construction: 2016, operating hours: 46,000 h, functionality: fully functional, overall weight: 1,890 kg, motor manufacturer: garden denver, power: 75 kW (101.97 HP), fuel type: electric, volume flow: 684 m³/h, operating pressure: 10 bar, noise level: 75 dB, type of cooling: water, color: blue, Equipment: type plate available, Oil-free Screw Compressor Compair D75HRS 10A 75kw 10 bar 11.4m3/min with frequency converter COMPAIR D75HRS Screw Compressor fully serviced, for sale in excellent condition Dcodpfx Acsw Nzrfj Nec oil-free design, direct drive, controlled by frequency converter. Regulated speed - air and water cooled 75kw power, air flow: 11.4 m3/min / 684m3/h Built-in frequency converter: Manufacturer: Compair D75HRS 10A Year of manufacture: 2016.11 hours: 46000 Drive power: 75Kw Pressure 10 bar Flow rate: 11.4/min Delco XL controller Main rotor speed: 2980 Voltage: 400v 50Hz 3 phase 85A Machine weight: 1890 kg Dimensions: 225 long 142 wide 205 high.

Condition: good (used), Year of construction: 2016, operating hours: 17,155 h, Forklift LINDE E25L triplex 450 full free lift/side shift/fork positioner/extendable BATTERY 2021! Year: 2016 Continuous stock, see our website. Prices ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices and in AS-IS condition with no warranties (see our general terms and conditions). For a viewing and/or test drive, you can make an appointment without obligation. Please call in advance, as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 Dcedpfx Acjx Hr Rhs Nsc 5391 LR Nuland

Condition: new, POWER&FREE CONVEYOR SYSTEMS Dcsdpfedy Eyvox Ac Noc Overhead Power & Free Conveyors have free trolleys that are driven by power chains and carriers that transport the material to a given location. The carriers are attached to the free trolleys and are normally engaged to the power chain by an attached pusher dog assembly on the free trolley. The pusher dog can be disengaged by a cam action in either the free trolley or the chain dog, caused by accumulating behind another free trolley or by engaging a stop blade. The chain continues to move while the carrier becomes temporarily stationary until the free trolley becomes re-engaged with the chain. Applications Accumulating Assembly Bias & Trias Banking Carrier Indexing Elevation Changes Production Rate Variation Sort Start/Stop Storage Transfer Advantages: High strength alloy castings increase life span Stainless steel chain pusher dog Modular designed conveyor components Stops are simple, compact and corresponding to industry standard Computer or programmable control systems Not possible in standard hanger conveyor systems: • Automatic stop and start of the system with the support of switches and sensors • Transferring the transported material to different directions with the help of the scissors on the rails. • Transport at different speeds in different parts of the conveyor • You can easily perform its controls with the PLC control system integrated on the system. • As long as possible, our designs are made by our expert engineering team with the principle of saving more time for your production, establishing an economical system that requires the least maintenance.

Condition: good (used), Year of construction: 2008, operating hours: 5,252 h, load capacity: 2,500 kg, lifting height: 4,700 mm, fuel type: gas, mast type: triplex, construction height: 2,100 mm, Komatsu FG25HT-16R Triplex 470 Freelift / Sideshift / Fork Positioner LPG 2008 Dedpfjx Hla Asx Ac Njcc Ongoing stock, see our website. Prices are ex Nuland. Van de Wert Trading B.V. has a variable inventory of machines, trucks, trailers, and attachments. All our deliveries are at trade prices on an AS-IS basis without warranties (see our general terms and conditions). You are welcome to make a non-binding appointment for a viewing and/or test drive. Please call ahead as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: good (used), Handtmann VF620 vacuum filler, in lovely condition. Has been pumping veg product into a PowerHeater extruder. Djdpfx Acjt R Sl De Nocc

Condition: used, Various box transport conveyors, consisting of motorized conveyor belts and gravity roller conveyors. Complete transport systems are available as well as individual curves and straight transport sections in various lengths. Additional title: crate conveyance belts Dodoxwy Hvopfx Ac Nocc Features: optional: conveyor frames, drives, substructure, connection to central belt lubrication, drip tray, frequency converter, control system

Condition: excellent (used), Year of construction: 2016, Atlas Copco SF8 + FF Oil Free Air Compressor This is a Used Atlas Copco SF8+FF Oil Free Scroll Air Compressor manufactured in 2016. SF+ 8 multi-scroll units bring in the benefits and flexibility of a modular system utilizing two to four compressor modules integrated into one canopy. The Elektronikon® continuously monitors the status of each element and starts and stops the compression elements, thereby ensuring that the compressed air output matches the air demand. Moreover, the perfect air quality and user-friendliness of these units guarantee a superior production process. Manufacturer: Atlas Copco Model: SF8 + FF HC Year: 2016 Capacity: 0,68m3/h Dodpjv D Hayjfx Ac Nocc Installed Power: 7,4 kW Noise Level: 63 dB Max. working pressure: 9,75 bar Machine Dimensions LxWxH: 1.700x760x1.850 mm Machine Weight: 457 kg.

Condition: new, Year of construction: 2024, SCHORR electric forklift RR25FL480E with a load capacity of 2500 kg, a lifting height of 4.8m (triplex mast) and lithium-ion technology. The SCHORR electric forklift is equipped with a permanent magnet synchronous motor (PMSM). Compared to conventional motors, the PMSM motor provides better energy savings and maximizes battery uptime by 10% in optimal operating scenarios. Our electric forklift is designed to take advantage of lithium technology and comes standard with a removable 80V/150Ah lithium-ion battery. This also enables spontaneous intermediate charging (opportunity charging) and is also maintenance-free. The battery can be charged at a normal 230V socket without having to be removed. Thanks to its small turning radius of only 2250 mm, it is able to maneuver easily even in the tightest spaces and narrow aisles. SCHORR electric forklift: -- 4.8m triplex mast -- Full free lift -- Incl. Li-Ion battery & internal charger -- All-rounder for indoor and outdoor use -- Removable lithium-ion battery - especially practical for multi-shift operation -- Opportunity charging / intermediate charging possible through lithium-ion battery -- Ergonomic work area allows safe & fatigue-free work -- Integrated charger allows charging at normal 230V outlet Technical data: -- Manufacturer: SCHORR -- Manufacturer's type designation: RR25FL480E -- Drive: Electric -- Operation: Seated -- Rated capacity/load: 2500 kg -- Load center distance: 500 mm -- Load distance: 495 mm -- Wheelbase: 1650 mm -- Tare weight: 4620 kg -- Axle load with load (front/rear): 5815/940 kg -- Axle load without load (front/rear): 1805/2450 kg -- Tires: hard rubber, non-marking / non-chalking tires -- Tire size, front: 7.00-12 -- Tire size, rear: 18X7-8 -- Wheels, number front/rear (x = driven): 2x/ 2 -- Track width, front: 975 mm -- Track width, rear: 955 mm -- Inclination mast/fork carriage forward/backward: 6/ 10 -- height of mast retracted: 2220 mm -- Free stroke: 1655 mm -- Lift: 4800 mm -- Height of mast extended: 5825 mm -- Height of canopy (cabin): 2550 mm -- Seat height referred to SIP/stand height: 1110 mm -- Coupling height: 295 mm -- Total length: 3725 mm -- Length including fork back: 2550 mm -- Total width: 1154 mm -- Fork dimensions DIN ISO 2331: 40x122x1070 mm -- Fork carriage ISO 2328, class/type A, B: 2A -- Fork carriage width: 1040 mm -- Ground clearance with load under mast: 120 mm -- Ground clearance center wheelbase: 150 mm -- Aisle width with pallet 1000×1200 crosswise: 3945 mm -- Aisle width with pallet 800×1200 crossways: 4145 mm -- Turning radius: 2250 mm -- Travel speed with/without load: 11/12 km/h -- Lifting speed with/without load: 0.29/0.36 m/s -- Lowering speed with/without load: 0.4/0.43 m/s -- Max. Climbing capacity with/without load: 15/15 % -- Service brake: Hydraulic -- Service brake: Hydraulic -- Parking brake: Mechanical -- Traction motor, power S2 60 min: 8 kW -- Hoist motor, power at S3 15 %: 16 kW -- Battery voltage/rated capacity: 80 V / 150 Ah Dcjdpspz H Uisfx Ac Nsc -- Steering version: Hydraulic -- Sound pressure level L pAZ (operator position): < 74 dB(A) We offer leasing as an attractive financing option. We will be happy to quote shipping costs on request. Inform now!

Condition: good (used), Year of construction: 2003, MANUFACTURER: ATLASCOPCO MODEL: ZT18 SERIAL NO.: AII702327 YEAR: 2003 Djdpfxexxb Eve Ac Njcc POWER (kW): 18.5 CAPACITY (m3/min): 2.51 PRESSURE (bar): 8.6

Condition: excellent (used), Year of construction: 2001, JUN-AIR Compressor in soundproof housing Model 2000-25M Power (PS) 16.0 bar Continuously adjustable Volume 25 liters Air dryer integrated Very well maintained Only 204 operating hours in a clean environment. Dimensions (LxWxH) in mm: 450 x 660 x 860 Dcjdpfext D Eusx Ac Njc Swivel casters with parking brake Noise level up to 52 dB, suitable for use in noise-sensitive environments.

Condition: new, Year of construction: 2025, operating hours: 2 h, machine/vehicle number: LENTO 55WK, New Speed-controlled, oil free, water injected screw compressor ALMIG LENTO 55 LK Year of construction: 2025 Dcodpjc Rt D Nofx Ac Nsc technical spezifications: Type: LENTO 55 WK Possible operating pressures of the system(continuously adjustable): 5 - 12 bar Delivery rate at minimum/maximum speed, measured according to ISO 1217 Annex C: at 5 bar min/max: 1.41 / 7.79 m³/min at 6 bar min/max: 1.40 / 7.74 m³/min at 7 bar min/max: 1.39 / 7.69 m³/min at 8 bar min/max: 1.38 / 7.64 m³/min at 9 bar min/max: 1.37 / 7.59 m³/min at 10 bar min/max: 1.35 / 7.29 m³/min at 11 bar min/max: 1.34 / 6.97 m³/min at 12 bar min/max: 1.33 / 6.71 m³/min Rated power of drive motor: 55 kW Protection / insulation class of drive motor: IE 3Protection / insulation class of fan motor: IP 54 / H Operating voltage / frequency at min. / max. speed: 380 / 41/200 V/Hz Residual oil content: 0 mg/m³ Cooling water requirement at 100% load( at inlet +15° / delta t = 15 K ): 55 l/min Cooling water outlet (max): 45 °C Cooling water pressure (min / max): 2 / 10 bar Cooling water quantity (min / max): 140 l/min Cooling water quality according to the valid "ALMiG cooling water conditions" Pressure dew point of refrigerant dryer at 50% load: 3 °C 100% load: 3 °C Sound pressure level (DIN 45635 T.13) soundproofed, at 50% load: 75.6 dB(A) 100% load: 78.2 dB(A) Length: 2,300 mm Width: 1,400 mm Height: 1,580 mm Weight: 1,690 kg Compressed air connection: G 1 1/2 inch Visit our shop, we always have a large number of new and used compressors in stock.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: API791194, power: 30 kW (40.79 HP), fuel type: electric, volume flow: 4.73 m³/h, pressure (max.): 7.5 bar, Oil-Free Compressor Atlas Copco ZT30 API791194, internally serviced and in perfect working condition. We have been Atlas dealers for 50 years. Large stock of used and new machines for sale. Djdpjw Ecz Ijfx Ac Nocc

Condition: used, Year of construction: 2000, Conveyor belts for glass bottles, with 2 unpressurised converging conveyors Transport with 1, 3 or 4 conveyor belts Capacity: 30,000 bottles/h Manufacturer: Krones Year of construction: 2000 Djdpow Ta Hcofx Ac Necc Additional title: free container conveyors Capacity approx.: 33000 Bottles/h Free bottle transport approx.: 115 m 90° Bottle transport curves: 10 pc. Conveyor belt widths: 4 conveyor belts Formats: 0,33 l Vichy, 0,33 l Euro, 0,35 l Lemonade, and 0,5 l NRW Operation / Control: Simatic S7-400 / S7-300 Material: Mainly stainless steel Position: free standing Features: Conveyor frames, deflection stations, drives, frequency controls, electrical switching devices, 2 pressureless bottle mergers (17/9/7/5/3/1 and 12/7/3/1 conveyor belts), automatic belt lubrication

Year of construction: 2020, condition: new, ROMER® deals with the production of single technological equipment for powder coating plants as well as complete fully automatic turnkey coating plants. ROMER® provides heating solutions for the aero and automotive industries for the largest corporations in the world. We provide warranty and post-warranty service for devices sold by us with a full range of spare parts. the trawl applied to a poorly prepared surface will fall off or corrode after a short period of time. Ensuring the best coating is essentially good degreasing - which is the basis of any painting. The coating of a poorly degreased detail will fall off after a very short time. After degreasing, the next step is to tear down the outer coating of the detail, which improves paint adhesion, e.g. when bending sheet metal, and protection, e.g. with a phosphate layer, which in turn will prolong corrosion resistance. There are many solutions that solve the above issues. What is the most important thing in a powder coating shop? You probably don't have experience with the applicator. Nothing more wrong, even the best applicator will not help you if your oven has bad temperature distributions, in the place where the element is overheated, the paint will discolor and where not heated, the paint will fall off. First of all, the stove is the most important. Oil, gas or electric furnace? You don't know how to power your stove? how is cheaper what does this involve? What are the operating costs? We will try to answer your questions. Dcjdpfefz Ndyjx Ac Noc Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at the same time and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution.

Year of construction: 2020, condition: new, ROMER® deals with the production of single technological equipment for powder coating plants as well as complete fully automatic turnkey coating plants. ROMER® provides heating solutions for the aero and automotive industries for the largest corporations in the world. We provide warranty and post-warranty service for devices sold by us with a full range of spare parts. the trawl applied to a poorly prepared surface will fall off or corrode after a short period of time. Ensuring the best coating is essentially good degreasing - which is the basis of any painting. The coating of a poorly degreased detail will fall off after a very short time. After degreasing, the next step is to tear down the outer coating of the detail, which improves paint adhesion, e.g. when bending sheet metal, and protection, e.g. with a phosphate layer, which in turn will prolong corrosion resistance. There are many solutions that solve the above issues. What is the most important thing in a powder coating shop? You probably don't have experience with the applicator. Nothing more wrong, even the best applicator will not help you if your oven has bad temperature distributions, in the place where the element is overheated, the paint will discolor and where not heated, the paint will fall off. First of all, the stove is the most important. Oil, gas or electric furnace? You don't know how to power your stove? how is cheaper what does this involve? What are the operating costs? We will try to answer your questions. Dodpfxsfz A H Ds Ac Necc Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at the same time and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution.

Year of construction: 2020, condition: new, ROMER® deals with the production of single technological equipment for powder coating plants as well as complete fully automatic turnkey coating plants. ROMER® provides heating solutions for the aero and automotive industries for the largest corporations in the world. We provide warranty and post-warranty service for devices sold by us with a full range of spare parts. the trawl applied to a poorly prepared surface will fall off or corrode after a short period of time. Ensuring the best coating is essentially good degreasing - which is the basis of any painting. The coating of a poorly degreased detail will fall off after a very short time. After degreasing, the next step is to tear down the outer coating of the detail, which improves paint adhesion, e.g. when bending sheet metal, and protection, e.g. with a phosphate layer, which in turn will prolong corrosion resistance. There are many solutions that solve the above issues. What is the most important thing in a powder coating shop? You probably don't have experience with the applicator. Nothing more wrong, even the best applicator will not help you if your oven has bad temperature distributions, in the place where the element is overheated, the paint will discolor and where not heated, the paint will fall off. First of all, the stove is the most important. Oil, gas or electric furnace? You don't know how to power your stove? how is cheaper what does this involve? What are the operating costs? We will try to answer your questions. Djdpoflrc Ssfx Ac Njcc Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at the same time and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution.

Year of construction: 2023, condition: new, Soon on stock in Poland. KCTE-1260 Camless multi axis CNC rotating and forming machine is composed by Taiwan computer system and Japan's Yaskawa servo motors and drivers specially designed with no rocker arm and camless, the slide base is separately controlled by eight servo slides, feeding axis, quill rotation axis, wire rotation axis and spinner. The machine optional with device like free arm or servo cutter /scissors with zero damage on mandarel and machine. Dcodskthx Rspfx Ac Njc No of Axis :12 Wire size range: ᶲ2.0-6.0mm. Max. Wire feed speed 105m/min Spring index 4 Feeding servo motor：7.5kw Quill servo motor: 1.8kw Wire rotation servo motor: 5.5kw Former servo motor: 5.5kw*8 Spinner servo motor: 1.8kw Power 3P/380V 50/60HZ Dimension L*W*H 3800*2000*2200 Weight 8000 KG

Year of construction: 2023, condition: as good as new (ex-display), Exhibit, immediately available: new RENNER SCROLL SL-I 4.5 (10 bar) oil-free compressor with RENNERtronic Touch control with star-delta Dedpjlnlrzjfx Ac Nscc Year of construction: 2023 Operating hours: 1 hr The compressor is in stock and available immediately Pressure: 10 bars Rated power: 4.50 kW Delivery quantity: 405 l/min Sound level: 68 dB(A) Compressed air outlet: 1/2" Dimensions length x width x height: 760 x 550 x 920 mm Weight: 181 kg Visit our store. We always have a wide range of new and used compressors in stock! Immediately available.

Condition: excellent (used), Year of construction: 2000, operating hours: 404 h, lifting height: 4,000 mm, mast type: triplex, gearing type: hydrostat, battery voltage: 12 V, fork length: 1,050 mm, color: yellow, Equipment: cabin, Forklift truck Hyster H60XM Only 404 operating hours! 2720 kg capacity Side shift Fork spreader Free lift up to 1.35 meters Lifting height: 4 meters Dcsdpfx Aswx Exvec Noc Tires: as good as new Cevoman bv. Lenskensdijk 5 2200 Herentals Belgium

Year of construction: 2023, operating hours: 0 h, condition: as good as new (ex-display), machine/vehicle number: OFASHL060-40G16AE, Parker Zander adsorption dryer Compressed air preparation system OIL FREE AIR SYSTEM. The OFAS combines sophisticated OIL-X filtration technology with one Optimized drying system to deliver consistently high performance over the long term. The air quality has been externally certified according to ISO 7183 and 8573-1 and meets the requirements of class 0 for the total oil content if required. With dew point control, regeneration air volumes adjustable Exhibit: Parker / Zander adsorption system OFASHL060-40G16AE Year 2019 Technical data: Compressed air connection: BSPT G 1/2 " Flow rate: 1.65 m³ / min at pressure dew point -20 ° C 1.50 m³ / min at a pressure dew point of -40 ° C Removes dirt, oil and water up to 0.003 μm Max. Pressure 16 bar Dimension: Width: 559 mm Depth: 490 mm Height: 1510 mm Weight: 93 kg Dodpfed Sninox Ac Necc The OFAS system is officially certified by Lloyd to ISO 8573-1 Class 0 in terms of the total oil content of the compressed air from oil-lubricated and oil-free compressors. Other models and designs on request!

Condition: as good as new (ex-display), Year of construction: 2025, machine/vehicle number: 340590, new RENNER SCROLL SL-NEO 7.5 I (8 bar) oil-free compressor Year of construction: 2025 Operating hours: 1 hr Pressure: 8 bars Rated power: 7.50 kW Delivery quantity: 890 l/min Sound level: 69 dB(A) Compressed air outlet: 1/2" Dimensions length x width x height: 835 x 595 x 935 mm Weight: 195 kg Dodpsv Al Nqofx Ac Nscc Visit our store. We always have a wide range of new and used compressors in stock! Immediately available.

Condition: ready for operation (used), A total of 10 deionization devices Keyence are available. Ion generation: +/-7000V, ion balance: +/-30V, max. effective range: approx. 3000mm, working distance range: 50mm-2000mm, electrode material: tungsten, applications: plastics/films/coating/electronics/packaging. Documentation available. An on-site inspection is possible. Djdpfxow R U Ags Ac Njcc