Used Frase for sale (47)

Condition: used, mileage: 2,600 km, power: 18 kW (24.47 HP), first registration: 05/1975, fuel type: diesel, overall weight: 1,300 kg, color: green, gearing type: mechanical, suspension: other, operating hours: 2,600 h, Equipment: all wheel drive, 1. First owner, new inspection (MOT/emissions test), diesel, manual transmission, all-wheel drive, first registration: May 23, 1975, 2,600 operating hours, Holder rotary tiller, original condition, permissible total weight: 1,300 kg, first-owner version, lawn tires also possible (both are available). FOR US, THE CONDITION AND OUR GUT FEELING ARE DECISIVE; THE PRICE IS SECONDARY. If you have any further questions, please do not hesitate to contact Mr. Schlägel at the following number. //*TRADE-IN, PART EXCHANGE, OR FINANCING OF YOUR VEHICLE IS POSSIBLE! All information is without guarantee.* You can find more offers on our website: The description and specified data do not constitute a warranty and are not binding. The purchase contract concluded at the car dealership when purchasing the vehicle is binding. Errors and prior sale are subject to change! Hedpfovictmsx Acdon

Condition: used, mileage: 165,321 km, power: 175 kW (237.93 HP), first registration: 03/2012, fuel type: diesel, empty load weight: 10,100 kg, maximum load weight: 1,890 kg, overall weight: 11,990 kg, axle configuration: 4x2, wheelbase: 5,360 mm, next inspection (TÜV): 08/2026, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 2, loading space length: 7,000 mm, loading space width: 2,450 mm, loading space height: 2,500 mm, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, compressed air brake, compressor, cruise control, differential lock, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, parking heater, parking sensors, power assisted steering, seat heater, soot filter, spoiler, traction control, trailer coupling, * German vehicle * From 2nd owner * Only 165,321 km, original * Condition: see photos * Sewer rehabilitation system by premium manufacturer PROKASRO * Robotic technology for sewer rehabilitation, pneumatic operation * State-of-the-art milling and rehabilitation robots are used in non-accessible main sewers and lateral pipes in diameters from DN 100 to DN 800, as well as egg-shaped and special profiles, to remove partial flow obstacles such as solidified deposits, connections, and all types of root ingress. * Following the hose relining process, house connections are reopened with TV inspection support * Various compression and injection systems as well as spatula systems are available depending on the type of damage (improper inlets, leaking pipe joints, missing wall sections or cavities) * KASRO working robot – self-propelled working unit – all movements can be carried out simultaneously, allowing complex geometries such as a saddle at a connection to be milled in a single pass – the working head can tilt 90° forward in the direction of travel on 4 axes * KASRO working robot – type 3.5 – powered by a self-propelled unit, including 3600 W motor – tensioning via an air-cushion system enables precise operation like a milling machine – working head features 340° swiveling color camera with remote and close range focusing, various milling attachments, various tire sizes * KASRO self-propelled unit – drive module for positioning – powered by 4 electric motors – each axle is mounted at the end of the scissor-type chassis, which is spread by pneumatic tension cushions – this drive concept allows two axles each to apply tractive force on the sewer invert and crown – at the same time, the design prevents the entering axle from pressing into cavities when passing over obstacles If a new TÜV inspection is required, we will gladly provide an offer from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, without new UVV. Hodpfx Acoy R Ef Hedsn You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We provide and strongly recommend an inspection and evaluation of the goods to prevent any misunderstandings regarding their condition and suitability. Inspection and testing are possible and expressly welcome at any time by appointment. All information provided without guarantee. No liability for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and features of the goods/vehicles. Subject to changes, prior sale, and errors.

Year of construction: 2007, condition: used, For inquiries regarding this attachment, Mr. Herden (by phone) will be happy to assist you. SIMEX TF 800 Rock Cutter / Milling Head / Tunnel Cutter / incl. Liebherr SW48 Adapter Plate / Year of manufacture: 2007 / in stock & immediately available Price: €13,890.00 net / €16,529.10 gross Drum width: 800 mm Milling speed: 75 - 115 rpm Hydraulic motor power: 61 (83) kW (HP) Required oil flow: 105 - 190 l/min Required oil pressure: 350 - 200 BAR Max. vertical force: 31.8 kN Operating weight (standard drum): 1,035 kg Recommended excavator weight: 14 - 22 tons Equipment: - incl. Liebherr SW48 adapter plate We have a large stock of adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) available for immediate delivery. We carry a wide range of different attachments in our warehouse, all available for immediate delivery! Mr. Herden (phone) is happy to assist you. On request, we are happy to provide you with a financing quote as well. We are official sales and service partners of: - Westtech - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - Magni Telehandlers - JCB Construction Machinery - Mercedes-Benz - Iveco With 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. Errors and prior sale reserved! Internal no.: 310390 Hedpfxoyxagne Acdjn = Further information = Curb weight: 1,035 kg For further details, please contact Marius Herden.

Condition: used, maximum load weight: 8,900 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 01/2013, loading space length: 6,100 mm, loading space width: 2,000 mm, loading space height: 400 mm, * Demmler TT 119 tandem low-loader trailer for milling machine transport * First registration: 2013 * Support for conveyor belt * Air suspension * Adjustable drawbar * 3 ramps * Payload: 8,900 kg * Unladen weight: 3,000 kg * Gross weight: 11,900 kg Hedpoyq Aytofx Acdsn * Platform dimensions: 6.10 m x 2.0 m x 0.40 m * Loading height: 70 cm * Ramp length: 2.50 m

Condition: excellent (used), Main engine power 3.4 / 4.5 kw Feed power (3 rollers) 0.7 kw spindle diameter 30mm The reach of the trolley is 170 cm Hedpfog Etw Ijx Acdsn Very good condition.

Condition: excellent (used), very good condition. Hsdpfx Acowx Hqteden

Condition: new, travel distance X-axis: 600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 150 mm, spindle motor power: 2,200 W, number of spindles: 1, spindle speed (max.): 24,000 rpm, Equipment: rotational speed infinitely variable, CNC4ALL Professional 1200 × 600 💪 Compact Precision CNC Milling Machine – powerful, versatile & in stock! Features (Premium Configuration): 💨 2.2 kW Spindle Motor (water-cooled) – powerful & quiet during continuous operation ⚙️ 9 Nm Stepper Motors (micro-stepping) – precise movements & smooth running 💧 Minimum Quantity Lubrication – extends tool life & reduces maintenance 🌪️ Extraction Hood – clean workspace & clear view while milling 🔄 Rotary Axis D 80 mm × 900 mm – ideal for cylindrical parts, engravings & 3D machining ❄️ Cooling System for Spindle – consistent temperature for long service life 🧲 Vacuum Pump (side channel blower) – secure clamping of small or large workpieces 💻 Control Software Included – Plug-and-Play: connect, start, mill! 📐 Technical Data: * Working area: 1200 × 600 × 150 mm * Accuracy: Positioning ± 0.02 mm | Repeatability ± 0.03 mm * Travel speed: up to 8,000 mm/min * Guide System: Hiwin linear guides, size 20 mm * Drive: TBI ball screws * Machine table: cast iron T-slot/vacuum table combination * Frame: welded steel base, CNC-machined for flatness & stability 🚀 Your Benefits at a Glance: ✅ In stock – ready for immediate delivery & turnkey upon arrival! ✅ Compact design with industrial precision – perfect for workshops & small batch production ✅ High performance for wood, plastic, aluminum & composite materials ✅ Clean, efficient production thanks to extraction hood & minimum quantity lubrication ✅ Flexible thanks to rotary axis & vacuum table – for both flat and round workpieces ✅ User-friendly control – quick setup & easy operation 🪵 Ideal for: Joineries • Model builders • Sign making • Prototyping • Plastics & aluminum processing Hjdpfxexwdkrj Acdjn 📦 Order now! The CNC4ALL Professional 1200 × 600 offers precision, performance, and reliability in a compact format – in stock & ready to use immediately. 👉 Contact us now for your personalized quote or to arrange a demonstration in our showroom.

Year of construction: 1990, condition: used, functionality: fully functional, The machine is in good condition. The milling head is not included. The Wegoma feed unit with standard stand is also included. Hodpfx Asyfxa Ejcdjn

Condition: as good as new (ex-display), Year of construction: 2024, Axolox 3021 CNC wood router - display machine available immediately - in 19mm Forescolor, consisting of a router table (X-axis), gantry (Y-axis), Z-axis unit made of compact board, and a base frame, with adjustable machine feet. Router bed as a sacrificial board made of 19mm MDF. Table openings pre-prepared lengthwise and crosswise. Mechanical set consisting of profile guides including profile guide carriages, recirculating ball screws, and precision racks. All elements assembled, pre-lubricated, including a test run, and immediately ready for operation. The control set consists of control cables, energy chains, planetary gears, stepper motors, high-performance power amplifiers, power supply, and toroidal transformer, fully pre-assembled in the control cabinet, as well as sensors for each axis. Switching relays for automatic control of the existing extraction system. Brush seals for dust protection, as well as CE-compliant safety devices with a mobile extraction system and a laser scanner mounted on one side for monitoring the work area, with a 275° and 5.5 m field range (positioning the machine in a corner of the room). A handheld control unit is equipped with all the necessary functions for operating the machine, including an emergency stop button and a deadman's switch. A tool length sensor is used to determine the tool length and change the active zero offset. A 2.2 kW high-frequency spindle includes a union nut, frequency converter, line filter, brake resistor, and collet set. A built-in monitor includes a mini PC with Windows 10 and Beamicon2 control software, as well as a mouse and keyboard, pre-installed in an ergonomic desk. A Rhino 7.0 CAD license and an Estlcam V11 CAM license, as well as all necessary documentation, will be sent by email prior to delivery. - Milling bed designed as a vacuum table consisting of six adjustable sub-elements. Cross table made of PE with an MDF cover plate. Vacuum pump from Becker with an output of 160 m³/h, with an oil-driven rotor. A 16 amp, 400 V AC plug is required for the vacuum pump's power connection. The customer must provide 3 mm HDF raw on both sides for the entire vacuum table (3000 x 2100 mm) as a sacrificial plate. (Recommended use: machining coated chipboard) - Tool set: 10 pieces 2 x 5 mm TAC double-flute cutters 8 x 4 mm solid carbide single-flute cutters - Maintenance package: Including a 150 ml grease gun, a 400 g cartridge of high-performance grease, a 500 ml can of silicone spray grease, and a grease nipple - Clamping device as an attachment for the existing high-frequency spindle. Suitable for slightly curved and particularly thin materials. Location: From stock, 54634 Bitburg - Available immediately - Subject to prior sale Hjdpjwdny Tjfx Acden

Condition: good (used), Year of construction: 1992, Mini tine cutter Hirsch type LQP 180 Hjdpfx Ajumk Dkjcdsn used For sawing For mini tines For countering For slotting Wood thickness min/max 50/80 mm Angle adjustment range +70/-70 degrees For cross processing of mini-joints and counter profiles. Changeover to +70/-70 degree bevel Length measurement at the stop, Wood clamping with bridge 8 bar Manual feed of the saw and milling carriage, safety circuit, electric brake system Wood thickness max. 80 mm Wood thickness min. 10 mm Profile depth max. 50 mm Saw unit: Three-phase motor 2.2 kW Spindle speed 2800 rpm. horizontal adjustment 50 mm Milling unit: Three-phase motor 4 kW Spindle speed 6000 rpm. Spindle length 100 mm usable Spindle diameter 40 mm Tool diameter 180 mm Weight 850 kg Dimensions 1600 x 1450 mm

Condition: excellent (used), Tool holder, milling holder, milling tool, milling mandrel -Milling tool holder: SK40 tool holders Hodpfx Aoy Tlc Rscdon -Cutter holder: Ø 6 mm -Number: 35 milling tool holders available Price: per piece -Dimensions: Ø 64 / 120 mm -Weight: 0.9 kg

Condition: like new (used), functionality: fully functional, Stringer milling device SCHEER TW 4 + Router HM 16 Everything is in excellent, like-new optical and technical condition, the device has been used very little. Fully functional—ready to use immediately. All machines are intended for commercial use, no DIY store scrap. Treppenwangenfräsgerät SCHEER TW 4 With this device, you can mill treads and risers very precisely and accurately. The hand crank even allows you to machine curved joint surfaces; you can also use it for recesses in other panel materials, such as worktops. Equipped with hardened guide rods, on which the cross support with router is mounted. Featuring ball bearing guide bushings, allowing the device to move very easily, accurately, and safely. The device can be clamped securely onto the stringer or similar workpieces using four screw clamps. The cross support has two stops each in both the longitudinal and transverse directions. Hedpfx Acoyxr T Tsdon Comes with two positioning angles. Complete with manual, tooling, and all accessories. Longitudinal milling travel: 750 mm; transverse milling travel has been increased from 75 mm to 320 mm, significantly expanding the machine's application range. To increase the milling travel, a new base frame made of aluminum profiles was manufactured. The modification work was carried out by a reputable engineering company. Everything works perfectly; this machine is a true one-off. Router SCHEER HM 16 Very good condition, with only minor signs of use. Very robust, thanks to triple-bearing router spindle. Accurate concentricity and flawless milling results. Precise column guidance and torsion-resistant milling table. Constant speed, even under heavy load. Equipped with high-performance motor (shows almost no signs of fatigue). Long service life thanks to soft start (full-wave electronics). Bearings are in good condition. The machine is suitable for the toughest continuous milling operations. Good visibility of the milling spindle; chips are blown away by a powerful fan. 220V, 1800W. Speed: 18,000 rpm. Fully functional. With M16 female thread mount.

Condition: new, empty load weight: 3,210 kg, maximum load weight: 8,690 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 6,000 mm, loading space width: 2,000 mm, suspension: other, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height loaded: 590 mm, reinforced steel checker plate floor, 2 x ramps (2,600 mm long x 900 mm wide), 10 lashing eyes (2 t) on the outer frame, 8 lashing boxes (5 t) in the corners, geared support winch with load and fast gear, front, 2 times folding supports, rear, , Chassis and body hot-dip galvanized, , Surcharge for support frame for cutter belt 600 ¤, Also with mechanical ramps in stock! , -- Misprints, errors and changes excepted, Sample pictures --, More data under: !, More Details: ! Hjdpfxjy Slyaj Acdon

Condition: new, empty load weight: 3,210 kg, maximum load weight: 8,690 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 6,000 mm, loading space width: 2,000 mm, suspension: other, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height loaded: 590 mm, reinforced steel checker plate floor, 2 x ramps (2,600 mm long x 900 mm wide), 10 lashing eyes (2 t) on the outer frame, 8 lashing boxes (5 t) in the corners, geared support winch with load and fast gear, front, 2 times folding supports, rear, , Chassis and body hot-dip galvanized, , Surcharge for support frame for cutter belt 600 ¤, Also with mechanical ramps in stock! , -- Misprints, errors and changes excepted, Sample pictures --, More data under: !, More Details: ! Hedpfx Ajy R Rffocden

Condition: new, empty load weight: 2,830 kg, maximum load weight: 9,070 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 6,000 mm, loading space width: 2,000 mm, suspension: steel, tire size: 235 / 75 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height loaded: 590 mm, reinforced steel checker plate floor, 2 x ramps (2,550 mm long x 900 mm wide), 8 lashing eyes (2 t) on the outer frame, 4 lashing boxes (5 t) in the corners, geared support winch with load and fast gear, front, 2 times folding supports, rear, , chassis and body hot-dip galvanized, also available with hydraulic ramps! , Surcharge for support frame for milling conveyor 600 ¤, , -- Misprints, errors and changes excepted, Sample pictures --, More data under: !, More Details: ! Hedpfsy Rx Uuox Acdon

Condition: used, functionality: fully functional, Various used rack cutters / rack milling cutter groups from different manufacturers Manufacturer: Arnold Dold GmbH & Co. KG 24 rack milling cutters available Module 0.5 – gang milling cutter Module 0.7 – gang milling cutter Module 0.9 – TiN coating Module 1 – 2 pcs available – gang milling cutter Module 1.25 – gang milling cutter Module 1.5 – TiN coating Module 1.75 – gang milling cutter Module 2 – 4-flute – minor damage Module 2 – TiN coating Module 2.5 – 8-flute – minor damage Module 3 – reground Module 3 – 7-flute – minor damage Module 3 – 7-flute – reground – BPIII – Ü Module 3 – TiN coating Module 5 – 4-flute – reground Module 5 – 4-flute – TiN coating Module 6 – 3-flute – TiN coating Module 6 – 3-flute – TiN coating – reground Module 7 – 3-flute – reground Module 8 – 3-flute – reground Module 10 – TiN coating Module 10 – reground – finish cutter Module 12 – TiN coating – finish cutter Module 12 – minor damage Module 13 – finish cutter Module 14 – reground Module 16 – reground Pressure angle: 20° BPII-Ü Bore diameter [mm]: 40; 50 Keyway [mm]: 10; 12 Width [mm]: 32.5; 45.5; 44; 17/21; 16/20; 14/18; 21/25; 18/22; 65/73; 48/57; 31; 66/72; 69/77; 70/78; 60/64; 60/66; 82; 72/80; 82; 40; 39; 47; 52; 56; 64 External Ø [mm]: 169; 140; 141; 200; 150; 198; 195; 199; 197; 201; 200; 219; 192; 191 Manufacturer: Saazor – Wälztechnik ZORN GmbH & Co. KG 7 rack milling cutters available Hedjytrh Ejpfx Acdon Module 1 – 16-flute – TiN coating – minor damage Module 1.5 – 9-flute gang milling cutter; 9 teeth per row; 2 – tangential milling cutter; 6 – tangential milling cutter Module 10 – TiN coating Pressure angle: 20° DIN 3972 II - Ü or DIN 3972 II Cl. A - Ü Bore diameter [mm]: 40 Keyway [mm]: 10 Width [mm]: 52/60; 55/85; 60/90; 33/40 External Ø [mm]: 176; 200; 198; 199 Manufacturer: Klingelnberg – 6 rack milling cutters available Module 2.5; 2.75; 3.25; 3.75; 4.5 Pressure angle: 20° Bore diameter [mm]: 40 Keyway [mm]: 10 Width [mm]: 30/38; 28/36; 35/42; 39/47; 44/52 External Ø [mm]: 148; 149; 150 All technical data subject to errors and typographical mistakes. Price on request Sale exclusively to EU countries.

Condition: new, functionality: fully functional, Fabr. Vergnano - 4 pcs pre-grinding solid steel hob cutters EGW 20 New - unused Cutting material - grade MC90 HRC 67+68 Alcrona coating Solid steel hob cutter 40x60x16 Hob cutter (Ø 40x60, bore Ø 16, roughing cutter, overlap) Solid steel hob cutter Fabr. Saazor - 6 pcs, cutting material carbide K-grade + TiAlN Carbide cutters made of HM K-grade material EGW 20, mod 0.8 Ø40x60, bore Ø16 All cutters are new and unused in original packaging Price on request Hedpfxewb Dfas Acden All technical data subject to typographical errors/mistakes Sale exclusively to EU countries.

Condition: like new (used), Year of construction: 2008, amount 1 STK Hsdpfx Asxgvzzscdon

Condition: excellent (used), functionality: fully functional, Edge banding milling machine with Holz Her 3-roller feed, 30 mm spindle, 50 mm milling width, machine size: 1000 x 1000 x 1300 mm, weight 250 kg, good condition, fully functional. Shipping available at additional cost! Due to the age of the used machine, warranty is excluded when sold to commercial customers. Hjdpfovkgdrsx Acdon

Condition: new, functionality: fully functional, power: 5.15 kW (7.00 HP), fuel type: gasoline, color: red, operation weight: 145 kg, Year of construction: 2026, BAUMAC Cable Trencher KF150 – NEW | Trenching width 100 mm | Trenching depth up to 450 mm | 42 chain links / 21 cutting teeth | Briggs & Stratton 7 HP engine | Weight 145 kg | Ideal for cable & pipe installation Hsdpfoy Ipdhox Acdon Technical Data: Manufacturer: BAUMAC Model: KF150 Condition: NEW Engine: Briggs & Stratton petrol engine Engine power: 7 HP / 212 cc Max. trenching depth: 450 mm Trenching width: 100 mm Number of chain links: 42 Number of cutting teeth: 21 Chain length: 1,600 mm Rear wheels: 2 x 14" pneumatic tyres Front wheel: 8" Weight: 145 kg Features & Highlights: - Walk-behind trencher – ideal for narrow trenches up to 100 mm wide - Max. trenching depth 450 mm – perfect for cables, pipes & drainage systems - Powerful Briggs & Stratton engine – easy maintenance & worldwide service support - 42 chain links & 21 cutting teeth – fast & clean trenching - Only 145 kg – flexible & autonomous thanks to petrol drive - Robust construction – suitable for hard ground conditions - Ideal for garden lighting, gate control systems, drainage, power & underground cable laying - Note: Clean chain from stones and debris after each use Applications: ✓ Landscaping & gardening ✓ Cable & pipe laying ✓ Drainage & dewatering works ✓ House connections ✓ Electrical & irrigation installations Location: Stock D-46514 Schermbeck (NRW) – Inspection & collection possible Delivery: Nationwide & international shipping on request Pricing: ex-warehouse Maassenstraße 91, D-46514 Schermbeck (Wesel district) All information provided without guarantee. Subject to prior sale and errors. Prices plus VAT / VAT excluded More versions available! ➡️ New & used machines, accessories & spare parts Buy trencher | BAUMAC KF150 NEW | Cable & pipe trencher with 7 HP Briggs & Stratton engine | perfect trenches for drainage & electrical work Your reliable partner for earthmoving & construction equipment: Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Enquire now & secure immediately available machines! If required, we are happy to offer a virtual machine inspection via video call.

Year of construction: 1990, condition: ready for operation (used), overall weight: 5,000 kg, total width: 1,500 mm, total height: 2,000 mm, product length (max.): 3,000 mm, spindle speed (max.): 20,000 rpm, This wood mill was manufactured in 1990. Consider the opportunity to buy this ROBLAND Tischfräse wood mill. Contact us for further details. Hodpfx Aoyi A Tkjcdsn

Condition: used, Year of construction: 2020, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). KEMROC EXR 60 HD surface planer / asphalt planer / milling attachment, incl. MS10 adapter plate / Year of manufacture: 2020 / in stock & immediately available Price: €24,890.00 net / €29,619.10 gross Milling width: 600 mm Adjustable milling depth: 0 – 190 mm Recommended speed: 70 – 95 rpm Recommended oil flow at 100 bar: 150 – 200 l/min Min. oil flow: 150 l/min Max. oil flow: 210 l/min Max. hydraulic operating pressure: 380 bar Torque at 350 bar: 9,300 Nm Cutting force at 350 bar: 28 kN Operating weight: 1,400 kg Number of picks: 69 Recommended excavator weight: 15 – 23 t Rated power: 80 kW Equipment: - incl. MS10 adapter plate - incl. spare picks - incl. hydraulic hoses as shown in photos - incl. transport frame We have a wide range of adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. Our warehouse holds a large selection of various attachments, all ready for immediate delivery! Mr. Herden (phone ...) will be pleased to assist you. On request, we are also happy to provide attractive financing options. We are an official sales and service partner for: - Westtech - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - Magni telehandlers - JCB construction equipment - Mercedes-Benz - Iveco With over 800 used commercial vehicles in stock, we are also one of Germany’s largest commercial vehicle dealers. Subject to errors and prior sale! Internal no.: 100439 Hedpfxeyxaf Rj Acdon = More information = Please contact Marius Herden for further information.

Condition: excellent (used), For sale is a lot of Sandvik brand side and face milling cutters and tool holders. Also included are roughing and finishing cutters. Scope of delivery as shown in the pictures. Side and face milling cutters in various sizes up to 300 mm diameter. Sandvik tool holders are included. Among others, the following types: 391.01-50 50 060, 391.10-27, 391.10.63.63.080, 391.42, 391.20. Hedpfxjyrnqto Acden

Condition: used, Year of construction: 2021, operating hours: 712 h, * Garbin Fiber 630 E trenching machine * Year of manufacture: 2021 * Operating hours: 712 h Hjdpfjyvn Alex Acdon * Including remote control * Kubota engine 54 kW * Weight: 3,500 kg * More pictures and videos available via Whatsapp * Details without guarantee, subject to prior sale.

Condition: used, No. 3203 Milling tool Leitz, Oppold Hjdpfx Aov Dutnscden Used Consisting of: 2x Leitz milling cutters, 1 of them unused 4x milling disks green 6x Oppold profile cutters - 2 x Leitz milling cutters, 1 of them unused Inner Ø 60 mm, outer Ø 170 mm, height 40 mm - 4 x milling disks green Inner Ø 35 mm, outer Ø 90 - 120 mm, height approx. 25 mm - 6 x Oppold profile cutters inner Ø 30 mm, outer Ø 120 mm, height 25 mm Sale on behalf of the customer, from location near 73430 Aalen Shipping by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location