Used Forging Manipulators for sale (468)

Condition: like new (used), Year of construction: 2022, operating hours: 5 h, functionality: fully functional, machine/vehicle number: 2260081, load capacity: 400 kg, Hello, I have this fully pneumatic DELMEC remote arm, which can lift and move up to 400 kg with one hand. The machine has been used very little; it's a showroom model. The machine is complete and in perfect working order. It can be sold as is, delivered, and even installed (to be determined together). Kjdpewcpl Ujfx Ahvjlp

Condition: new, Year of construction: 2023, Manipulator with hydraulic height adjustment, faceplate with clamping slots and manual remote control. Height (faceplate horizontal): approx. 670 - 2,400mm Swivel range of face plate: approx. +-360°. face plate dimensions: Ø1.200mm x 40mm, 6x clamping slots Rotational speed of main axis: approx. 2.0 rpm (other Torque main rotary axis: approx. 13.000 Nm Speed of face plate: approx. 0.2-2rpm Torque face plate: approx. 10.000 Nm Kledpfx Ahsnqzt Asvjp

Condition: good (used), machine/vehicle number: 23027, Offer 23027 Technical data: Ksdji Dr Tbspfx Ahvslp - Diameter top / bottom 350 / 750 mm - Wall thickness approx. 45 mm - Foot diameter 750 mm - height 1380 mm - Total weight approx. 600 kg

Condition: used, Year of construction: 2001, functionality: unexamined, load capacity: 600 kg, Dalmec MXF Ceiling Balancer-Manipulator Manufacturer: Dalmec lifting systems Model: Dalmec MXF Manufactured: 2001 Lift capacity: 600 Kg Kledpfxov Diido Ahvsp Pressure: 0.90 MPa

Year of construction: 2022, condition: as good as new (ex-display), Manipulator with hydraulic height adjustment, face plate with clamping slots and manual remote control. Height (face plate horizontal): approx. 532 - 1.132mm Kedpfx Ahjfw Ah Rsvelp Lifting distance/lifting time (hydraulic): approx. s = 600mm, t = 20s Swivel range of face plate: approx. +-300°. Height (Pl.-sch.vertical axis): approx. 709mm Dimensions face plate: Ø1.200mm x 40mm, 6x clamping slots Speed of the main axle: approx. 2.0 rpm (other Torque main axis of rotation: approx. 7,500 Nm Face plate speed: approx. 2.5 rpm Face plate torque: approx. 1,500 Nm

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Equipment: compressed air system, For sale is a Zeilhofer hand manipulator Very good condition and very little use. Lifting capacity 250 kg - currently reduced by us to 100 kg Klsdpeu Hyl Eofx Ahvop Fresh service and UVV directly from Zeilhofer Device is mobile with the forklift - no dowels in the floor necessary Complete documentation and all documents available Vacuum head can be rotated 360 degrees and swiveled 90 degrees Second device available, which sucks upwards. Pictures on request Invoice will be issued

Condition: used, functionality: unexamined, machine/vehicle number: GER-078, load capacity: 10,000 kg, Cable-operated workpiece manipulator with a 10,000 kg load capacity Max. workpiece width: 2,000 mm Total dimensions: 5,860 x 800 x 1,400 mm Weight: 3,090 kg Kedowbflhspfx Ahvjlp Max. load capacity: 10,000 kg Max. workpiece width: 2,000 mm

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: TD2002, Schmalz Vacuum Lifter with 50kg Payload / Lifting Capacity Dimensions: 30 x 30 x 30 cm, Weight: 11 kg Equipped with 1 suction pad, approx. 150 mm diameter Klsdpfx Aheupyn Revop 1 compressed air connection Good condition, see pictures Item location: 75053 Gondelsheim Shipping via freight forwarder or collection by appointment only

Year of construction: 2022, condition: new, Height adjustable L manipulator Load: 500kg Stroke: 640mm, height faceplate min. 480, max. 1.110mm Pivoting range: +/-185 face plate diameter: 800mm Welding current: 400A Torque face plate: 900Nm Torque swivel arm: 900Nm Total length: 2.495mm Height: 1.855mm Width: 900mm The rotary stand is controlled by a hand-held remote control with the following functions: - LIFT arm - arm LOWER - Arm swivel RIGHT - Arm give LEFT - Potentiometer for the stepless SPEED- adjustment of the faceplate For the control of the face plate a two-pedal foot switch is available with the functions: - face plate rotation RIGHT - face plate rotation LEFT Kodsh Td Thspfx Ahvelp

Year of construction: 2022, condition: new, Height adjustable rotary tilt table Load: 500kg Stroke: 1.015mm, height faceplate min. 345, max. tilt angle 120°. Face plate diameter: 800mm Welding current: 400A Torque face plate: 1.300Nm Total length: 2.365mm Height (housing): 1.030mm The rotary tilt table is controlled by pushbuttons on the machine housing with the following functions: - LIFT arm - Arm LOWERING - Potentiometer for the stepless SPEED- Kjdpfx Ahoh Tfbzjvolp adjustment of the face plate For the control of the face plate a two-pedal foot switch is available with the functions: - face plate rotation RIGHT - face plate rotation LEFT

Year of construction: 2022, condition: new, Manipulator with two height adjustable outriggers and face plate. Load: 1.500kg stroke: 800mm Kodpfxjfnku Hs Ahvslp swivel range: 300 face plate diameter: 1.000mm Welding current: 600A

Condition: good (used), Forged gripper, manipulator forged gripper, sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper Kedpedavnzofx Ahvelp -Sheet metal claws -Span: 0 to 250 mm -Load capacity: 1,000 kg -Quantity: 1 piece available -Dimensions: 730/240/H860 mm -Weight: 118 kg

Condition: good (used), Forged gripper, manipulator forged gripper, sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Manufacturer: VEB, Material gripper type B04-Z10-1 -Load capacity: 1,000 kg Kjdpfx Ahslntntsvolp -Wingspan: see photos -Dimensions: 280/190/H320 mm -Weight: 21 kg

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, load capacity: 16 kg, arm reach: 1,611 mm, controller manufacturer: KUKA, controller model: KRC2 ED05, The KR 16 F is a compact foundry robot built to operate in high-temperature, dusty, and wet environments. With a 16 kg payload and 1610 mm reach, it delivers precise handling in casting, forging, and other demanding processes. Main Applications: - Welding - Dispensing - Additive Manufacturing Model: KRC2 ED05 KR 16-F Condition: Used Kedpfx Ajw Nawyohvolp Year: 2006 (more option is available) Controller Cabinet: KRC2 ed05 Included: Manipulator + KRC2 Control Cabin + All Wire Sets + Teach Pendant Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman. (Source: KUKA's Website)

Condition: used, Year of construction: 1997, functionality: fully functional, clearance between the columns: 579 mm, casting force: 350 N, stroke length: 420 mm, column diameter: 125 mm, overall weight: 12,000 kg, power: 22 kW (29.91 HP), Locking Force: 350 metric tons Tie Bar Diameter: 125 mm Clearance Between Tie Bars: 579 x 579 mm Die Thickness (Minimum - Maximum): 300 - 700 mm Die Stroke: 420 mm Moving Platen Size: 940 x 940 mm Injection Position: -125 mm Power Requirement: 22 kW Kljdsv D Dwpopfx Ahvop Machine Weight: 11,974 kg (26,400 pounds) Sold with trimming press and manipulator.

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, load capacity: 10 kg, arm reach: 1,100 mm, Extreme precision and rapid acceleration are two major advantages of the KR 10 R1100 Sixx. With floor, ceiling, and wall mounting options, this robot is highly versatile and can handle a wide range of applications such as: -Palletizing -Material Handling -Machine Loading  -Assembly -Cutting Model: KR10 R1100 SIXX Condition: Refurbished Year: 2014 Controller Cabinet: KRC4 Included: Manipulator + KRC4 Control Cabin + All Wire Sets + Teach Pendant + 1 year of warranty PLC MERKEZI Refurbishment Services Include: • Cleaning: The surface of the robot panel and the robot has been cleaned. • Oil Changing: The oils of all axes (6 axes) of the robot have been replaced. • Battery Changing: All batteries have been replaced with the new ones. • Mechanical Maintenance: Gear wheels counter balance are checked and maintained after weight, repeatability tests. • Electronical Maintenance: Includes drivers, electronic boards, teach pendant and PC maintenance. Klsdpfsq Dz Udjx Ahvep • Polishing and Repainting: After the cleaning the robot gets polished and be painted to its original colour, can be painted to the colour that you desired. Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific production needs.

Condition: used, power: 368 kW (500.34 HP), axle configuration: 4x2, color: white, driver cabin: sleeper cab, gearing type: automatic, Year of construction: 2025, Equipment: ABS, EBS, air conditioning, - Brake system Kljdpfx Ajywdfrshvep For vehicle inquiries, Mr. Seidel will assist you (by phone ...). Iveco X-Way 500 4x2 Tractor Unit Axle configuration: 2 axles, rear axle drive, cab AS MY design, emission level Europe, engine model Cursor 13 with 500 HP, Euro VIe, transmission: 12-speed HiTroniX, automated, permissible gross vehicle weight 18–20 t, drive axle single reduction variant, single axle, rear axle air suspension, disc brakes, designed for mixed applications, suitable for on-road and light off-road use, standard tractor unit variant, vehicle set-up ON+, wheelbase 3,650 mm, engine plate, engine speed 1650 RPM, emissions standard EURO VI E, tires DRIVE T. 315/80R22.5, speed limiter 90 km/h, electrically operated roof hatch, transparent with MLL high roof, front underrun protection for chassis with total weight over 7,490 kg, first aid kit, hybrid bumper, non-heated windshield, electrically adjustable and heated exterior mirrors, standard cab roof insulation, EC Whole Vehicle Type Approval (COC), fully automatic climate control, digital tachograph 4.1, static passenger seat, front axle weight variant 8,000 kg / rear axle 11,500 kg (technically possible 13,000 kg), batteries 225 Ah, smart alternator 2880 W (24V x 120A), demand-controlled, air suspension on rear axle, parabolic spring on front axle, batteries mounted on frame overhang, 2 wheel chocks, SR-SOLO LIGHT 17x, standard tank signage, rear shock absorbers, climate version for moderate climates, 2-cylinder air compressor 630 ccm, jack, battery charging interface, front and rear stabilizer, exhaust tailpipe left side, air filter unit under cab, mechanical battery disconnect switch on chassis, right side, standard frame adjustment, standard driving height, trailer dual-circuit brake, standard fifth wheel kingpin offset EG, trailer socket for 24-volt operation, 15-pin, rear axle ratio: i 2.85, rear frame overhang 1,047 mm, standard transmission mode, 4G connectivity box including TCO service contract, STANDARD SETTING CURSOR 13, Tire Pressure Monitoring System (TPMS) with internal sensors, 4 DIN slots storage on top, VDI interface (Vehicle-Data-Interface) for telematics (FMS) version 4.0, transmission software ECO-Roll (freewheeling function), Adaptive Cruise Control (ACC), Lane Departure Warning System (LDWS), Driver Drowsiness Attention Warning, warning triangle per ECE-27 directive, Hill Holder hill-start assist for easier starting on inclines, Electronic Stability Program (ESP), reversing camera monitoring system, Blind Spot Information System (BSIS) right side, Intelligent Speed Assistance (ISA), NO HIGH WAY ASSIST, side marker lamps, Moving Off Information System (MOIS), Automatic Emergency Braking System (AEBS), pneumatic parking brake, pre-wiring for alcohol interlock device (ALC) with cable, CAMBIO 12TX 2460 TD, standard EU vehicle width, forged Alcoa aluminum rims, matte finish, PTO NH/4C with pump connection Suitable for Meiller tipper or crane tipper, electrically operated cab tilt system, hybrid bumper painted in cab color, AS cab with standard roof (MY24), 15m tire inflation hose, left and right luggage compartment, single-piece lower bunk, firmness/comfort level – soft, including adjustable headrest, ashtray in center console, electronic immobilizer and third vehicle key, ...

Condition: new, power: 368 kW (500.34 HP), axle configuration: 4x2, color: blue, driver cabin: sleeper cab, gearing type: automatic, Equipment: ABS, EBS, air conditioning, - Braking system For inquiries about the vehicle, Mr. Seidel will gladly assist you (by phone). Kljdjywdflopfx Ahvep Iveco X-Way 500 4x2 Tractor Unit Axle configuration: 2 axles, rear axle drive, cab version AS MY, European emission standard, engine: Cursor 13, 500 HP, Euro VI, 12-speed HiTroniX automated gearbox, permissible total weight 18-20 t, disc brakes, suitable for mixed use (on-road and light off-road applications), vehicle set-up ON+, wheelbase 3,650 mm, engine nameplate, engine speed 1650 RPM, emission standard EURO VI E, tire specification 315/80R22.5, speed limiter 90 km/h, electrically operated roof hatch (transparent for MLL high roof), front underrun protection for chassis with total weight over 7,490 kg, first aid kit, hybrid bumper, non-heated windshield, IVECO standard logo in light gray, electrically adjustable and heated exterior mirrors, standard cab roof insulation, COC certificate of conformity, 10-inch instrument cluster, fully automatic air conditioning, EC digital tachograph 4.1, static passenger seat, axle weight configuration: front axle 8,000 kg / rear axle 11,500 kg (technically possible up to 13,000 kg), batteries 225 Ah, smart alternator 2880 W (24V x 120A), demand-controlled, air suspension on rear axle, parabolic spring on front axle, batteries mounted in rear frame overhang, 2 wheel chocks, SR-SOLO LIGHT 17x, standard air tank plates, rear shock absorbers, configuration for moderate climate, 2-cylinder air compressor 630 ccm, jack, battery charging interface, stabilizer bar front and rear axle, exhaust outlet on left, air filter unit under cab, mechanical battery cut-off switch on chassis (right side), trailer dual-circuit braking, fifth wheel preparation according to EC, trailer socket for 24V operation (15-pin), rear axle ratio: i=2.85, rear frame overhang 1047 mm, Connectivity Box 4G incl. TCO service contract, tire pressure monitoring system (TPMS) with internal sensors, 4 DIN slots upper storage, VDI interface for telematics services (FMS) version 4.0, gearbox software ECO-Roll (freewheel function), adaptive cruise control (ACC), lane departure warning system (LDWS), driver drowsiness attention warning system, warning triangle (ECE-27 compliant), hill start assist (Hill Holder) for easier starting on inclines, electronic stability program (ESP), reversing camera system, blind spot detection system (BSIS) right side, intelligent speed assistant (ISA), side marker lights, front zone monitoring system (MOIS), advanced emergency braking system (AEBS), pneumatic parking brake, pre-wiring for alcohol interlock (ALC), Alcoa forged aluminum wheels (matte finish), NH/4C PTO with pump connection, electrically operated cab tilting system, hybrid bumper painted in cab color, AS cab with standard roof (MY24), left and right luggage compartments, one-piece lower bunk (soft with adjustable headrest), ashtray in center console, electronic immobilizer and third vehicle key, dashboard switch for trailer lift axle, Jost brand fifth wheel coupling, fifth wheel height: 150 mm + mounting plate height: 50 mm, fuel tank 480 liters (left, aluminum), AdBlue tank 135 liters with integrated step (for CM chassis and 4x2 tractor), 145 liters without step, expansion module...

Condition: used, mileage: 318 km, power: 368 kW (500.34 HP), axle configuration: 4x2, color: blue, driver cabin: sleeper cab, gearing type: automatic, Year of construction: 2025, Equipment: ABS, EBS, air conditioning, - Braking system For enquiries about the vehicle, Mr. Seidel will be happy to assist you (by phone). Iveco S-Way 500 4x2 Tractor Unit Axle configuration: 2 axles, rear axle drive, driver’s cab Cab version: AS MY, emission standard: Europe, engine: Cursor 13, 500 hp, Euro VI, transmission: 12-speed HiTroniX automated, approved gross weight: 18–20 tonnes, drive axle: single reduction, single axle, full air suspension, disc brakes, vehicle version: Low Tractor, wheelbase: 3,800 mm, engine speed: 1650 rpm, standard reverse gears, emission norm: EURO VI E, speed limiter: 90 km/h Electric sunroof, transparent (for MLL high roof), front grille: black, front underrun protection, first aid kit, external trim in black, AS high-roof cab, non-heated windscreen, exterior mirrors electrically adjustable & heated, cab roof insulation: standard, dashboard: plastic with black trim strips, COC (Certificate of Conformity) general operating permit, 10-inch instrument cluster, single-piece lower bed, mattress firmness – soft, digital tachograph 4.1, passenger seat static, smart alternator 2,880 W (24V x 120A), demand-controlled, SR-SOLO LIGHT 17x, air tank labelling: standard, rear shock absorber, version: moderate climate, single-cylinder air compressor 352 cc, front axle stabiliser, air filter unit under cab, adjustable ride height (2 settings), trailer dual-circuit brakes, rear axle ratio: i = 2.17, fifth wheel setting (EC), 24V trailer socket (15-pin), rear frame overhang: 1,047 mm, 4G connectivity box incl. TCO service contract, engine idle cut-off, tyre pressure monitoring system (TPMS), vehicle data interface (VDI) for telematics services (FMS) – version 4.0, transmission software ECO-Roll (freewheel function), adaptive cruise control (ACC), driver drowsiness attention warning, warning triangle (ECE-27 compliant), standard catwalk behind cab, hill start assist (hill holder), electronic stability program (ESP), reversing camera system, blind spot monitoring system (BSIS) right, intelligent speed assistant (ISA), side marker lights, moving-off information system (MOIS), emergency braking assistant (AEBS), pneumatic parking brake, preparation for alcohol interlock (ALC) with cabling, 12TX 2250 TD gearbox, Alcoa forged aluminium rims, matte, DRIVE T. 295/55R22.5, PTO preparation (including switch in dashboard and chassis wiring), left and right luggage compartments, hybrid bumper, electrically operated cab tilt, black decorative door foil, transparent sun visor (external, on cab roof), premium fridge & storage box, auxiliary diesel/water heater 4kW, full automatic air conditioning with parking cooler, leather steering wheel, air horn (behind bumper, pneumatic), folding table (passenger area), ambient lighting, electronic immobiliser, continuous mattress upper bunk, ashtray in centre console, electro-hydraulic power steering, dashboard switch for trailer lift axle, Tectyl underbody protection, stone chip protection, electric battery master switch in cab, aluminium air tanks (number dependent on configuration) ... Klsdoywdffjpfx Ahvep

Year of construction: 2000, condition: good (used), used drum shot blast machine Brand: OMSG Type: ROTOFLOW Model: 170-N Year 2000 Registration: 10371/00 Continuous belt shot blasting machine for sandblasting/shot blasting aluminum injection, brass or steel forgings, screws and bolts. Automatic feeding tower. Max unit weight of the piece: 8kg Turbines: 2 x 11kw Turbine diameter: 350mm inverter turbines Kodpfx Ahjmza S Eevolp Special two position valves Filter CURRENT STATUS: Disassembled and stored in our facilities.

Year of construction: 2000, condition: used, OMSG brand ROTOFLOW 170-N drum shot blasting machine with automatic feed tower, year 2000 Used drum shot blasting machine Continuous belt shot blasting machine for shot blasting of aluminum, brass or steel forgings, screws and bolts. Automatic feed tower. Inverter turbines Special valves with two positions Filter. Kljdpfxet Ag Ude Ahvop

Condition: used, TECHNICAL DETAILS - Parts per minute : 300 - Cutting diameter : 6 [mm] - Die ejection : 55 [mm] - Floor space (width) : .97 [m] - Floor space (length) : 2.77 [m] - Motor : 7.5 [hp/kW] - Net Weight : 3500 [kg] - Gross Weight : 4100 [kg] EQUIPMENT - Tooling as per photo - Positive ejection on 2 punches Klodpfsuhb T Djx Ahvep - Ejector retraction in die - Various spare parts

Condition: used, TECHNICAL DETAILS - Parts per minute : 300 - Cutting diameter : 6 [mm] - Die ejection : 55 [mm] - Floor space (width) : .97 [m] - Floor space (length) : 2.77 [m] - Motor : 7.5 [hp/kW] - Net weight : 3500 [kg] - Gross weight : 4100 [kg] EQUIPMENT - Equipped with ejector recoil between rough part and finishing (RLKO) - Positive ejection (TKO) Kljdpfxouhb Two Ahvjp - Tooling as per photo

Condition: used, TECHNICAL DETAILS - Parts per minute : 450 - Cutting diameter : 4 [mm] - Die ejection : 25 [mm] - Floor space (width) : .74 [m] - Floor space (length) : 1.88 [m] - Motor : 4 [hp/kW] Ksdeuhb Tqspfx Ahvslp - Net Weight : 1600 [kg] - Gross Weight : 2100 [kg] EQUIPMENT - Tooling as per photo

Condition: used, TECHNICAL DETAILS - Parts per minute : 400 - Rivet length : 12 [mm] - Drilling depth (max.) : 5 [mm] - Cutting diameter : 3 [mm] - Floor space (width) : 1.12 [m] - Floor space (length) : 2.21 [m] - Height : 1.77 [m] - Motor : 4 [hp/kW] - Net weight : 2,500 [kg] Kledpfxouhb Tks Ahvjp - Gross weight : 3,000 [kg] EQUIPMENT - Tooling as per photo