Used Forging Manipulators for sale (456)

Condition: used, Year of construction: 1957, ram hammer weight 200 kg ram hammer stroke 525 mm no. of strokes 150 /min impact energy 420 kJ distance lower die block / ram gudeway 435 mm Throat 425 mm steel forging - rectangular up to 110 mm steel forging - diameter up to 125 mm power requirement 22,0 kW Gedpfx Aevzxpbsb Doit weight of hammer 3,9 t weight of anvil 3,0 t weight 6,9 t dimensions (WxDxH) 1,1 x 2,3 x 2,4 m Forging hammer as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1999, ram hammer weight 26 kg Giedsqwpxbspfx Ab Det ram hammer stroke 200 mm type KO 596 no. of strokes 220 Hub/min air hammer

Condition: used, Year of construction: 1970, pressure . t stroke . mm impact capacity 60-70 mkp total power requirement . kW weight of the machine ca. 3 t dimensions of the machine ca. . m Gjdpfx Asud Tp Neb Djit

Condition: used, Year of construction: 2017, Manufacturer: Manut LM Model : MAN Gjdpfx Abex R A Nvj Deit Year: 2017 Body type : Vacuum Tube Manipulator Application : Handling of bags and boxes Maximum load : 30 kg Classification: ATEX Vacuum pump : Becker SV 8 400/2 Dimensions : see photo drawing.

Condition: good (used), Anvil with base -LxWxH: 1000x350x360 mm (anvil dimensions) Gisdsx N Ew Tepfx Ab Dot -Weight approx. 300 kg Subject to errors and input mistakes.

Condition: used, We offer for sale manipulators (new) as well as used single axes, accessories, and wiring. Delivery term: EXW Trstena Minimum order value: €5,000 Gijdpfx Asyc Rv Tob Dot

Condition: not inspected (used), turning diameter: 6,300 mm, center width: 1,000 mm, workpiece weight (max.): 80,000 kg, overall weight: 15,960 kg, Used machine min. diameter: 1000mm max. diameter: 6300mm Workpiece weight 80,000 kg EG: 15,960 kg Gedpfx Asvtq H Nsb Doit

Year of construction: 1978, condition: excellent (used), FORGING HAMMER HUTA ZYGMUNT MPM 6300B Giedpoivqanjfx Ab Det

Condition: good (used), Year of construction: 1985, Manipulator, lifting aid, lifting device, workstation crane, overhead jib crane, overhead crane, workstation crane, material grabber, column jib crane -Manufacturer: Thyssen, pneumatic manipulator type ESP -Load capacity: 30 kg -Operating pressure: 6 bar -Reach: max. 2900 mm Gjdsx Ec Ifjpfx Ab Deit -Hook height: min. 500 mm / max. 1500 mm -Swivel range: 360° -Minimum ceiling height: 4400 mm -Transport dimensions: 3410/800/H2000 mm -Empty weight: 610 kg

Condition: ready for operation (used), Romanian Forging Hammer CM 2500 (The hammer is similar to Huta Zygmunt MPM 6300B) - Maximum impact energy at full stroke: 7000 kgm - Ram weight: 2500 kg - Mode of operation: pneumatic - Ram stroke: 850 mm - Number of blows per minute: 100 - Working pressure: 5–7 bar - Anvil weight: 48 t - Total weight: 65 t Romanian Forging Hammer CM 1250 (The hammer is similar to Huta Zygmunt MPM 3150B) - Maximum impact energy at full stroke: 3600 kgm - Ram weight: 1250 kg - Mode of operation: pneumatic - Table size (front to back): 700 mm - Stroke: 800 mm - Number of blows per minute: 110 - Working pressure: 5–7 bar - Max. upper die weight: 400 kg - Die height: 220 mm - Ram (front to back): 500 mm Giodpfx Aow Sdxaob Djt - Air consumption: 15 m³/min - Anvil weight: 24 t - Height of machine above floor: 3750 mm - Total machine height: 4380 mm - Total weight: 35 t

Condition: ready for operation (used), Forging hammers, C type, capacity 80 kg, 400 kg and 750 kg. Ram weight: 80, 400 and 750 kg. Blow energy: 150, 1000 and 2000 KJ. Stroke: 385, 670 and 835 mm. Strokes/min: 210, 130 and 105. Weights: 3,500 kg / 13,500 kg / 25,000 kg. Gijdox Ahbfspfx Ab Dst

Condition: good (used), Load capacity: 50 kg Working length: 7000 mm Giedsh Ri Svspfx Ab Det

Condition: used, Pneumatic pick & place manipulator, loading unit similar to SCARA robot. Handling device, handling system, placement gripper, loading gripper for automation. Horizontal axis with guided cylinder linear module type CLM 100-H100 (GEMOTEC column module). Vertical axis with guided cylinder linear module type CLM 100-H50 (GEMOTEC column module). Payload: max. 2 kg Horizontal stroke: 100 mm (pneumatic) Gsdpfx Aboxf Ur Ae Dsit Vertical stroke: 50 mm (pneumatic) Vertical adjustment on both support columns: 330 mm (manual, with clamping) Support columns, vertical guide column: Ø 55 mm Mounting base: 175 x 90 mm - Pneumatically traversable in two axes with precise linear guidance - End position dampers - Mounting plate for tool attachment 55 x 65 mm Required space (L x W x H): 320 x 170 x 550 mm Net weight: 16 kg Very good condition Various manipulators available, see our webshop.

Condition: ready for operation (used), functionality: fully functional, total length: 3,500 mm, total width: 1,500 mm, total height: 3,200 mm, overall weight: 10,000 kg, No minimum price – guaranteed sale to the highest bidder! Giodpfewvi Hxsx Ab Dst Placing a bid obliges you to collect the item between 28/07/2025 and 31/07/2025. TECHNICAL DETAILS Ram weight: 400 kg Blow frequency: 120/min MACHINE DETAILS Total weight: 10,000 kg Overall height: 3,200 mm Overall length: 3,500 mm Overall width: 1,500 mm

Year of construction: 2022, condition: new, Attachment suited for: Construction machines The high speed manipulator on the pictures is manufactured for casting factory. They put the the materials into the grinding process. We can manufacture boom-arm in hydraulic or electrical systems with breaker, bucket, grapple etc.. Gedpfx Absn Tm Sxs Deit For detailed information please contact us

Condition: not inspected (used), Year of construction: 1993, functionality: unexamined, machine/vehicle number: AQ1195020, overall weight: 1,800 kg, Equipment: documentation/manual, No reserve price – guaranteed sale to the highest bidder! Gjdpfxexp Nquj Ab Djit The payment deadline for the machine is 20/11/2025! Bidding obligates timely collection between 01/12/2025 and 05/12/2025! MACHINE DETAILS Motor Total power: with hydraulics 5.0 kW / without hydraulics 7.2 kW Voltage: 400 V Total current: with hydraulics 12 A / without hydraulics 18 A Frequency: 50 Hz Motor protection class: IP 55 Hydraulics Max. flow rate: 6.4 l/min Max. pressure: 200 bar Oil tank capacity: 13 l Recommended hydraulic fluid: ESSO Hydraulic Oil HLP32 Dimensions & Weight Dimensions (L x W x H): 1,800 x 1,350 x 1,500 mm Total weight: 1,800 kg EQUIPMENT Accessories as shown in the photos Technical documentation

Condition: ready for operation (used), Erfurt Trimming press PKZe 500/1000 Power 500 to Table dimension 1020x1420 mm Stroke 400 mm No of strokes / min - 12 Main motor 41kw Movie available Gijdpfx Abjvbcxtj Djt

Condition: ready for operation (used), Romanian Forging Hammer CM 3150 Giedpfew Sdwvsx Ab Det The hammer is similar to Huta Zygmunt MPM 10000B. - Maximum impact energy at maximum stroke – 10,000 kgm; - Ram weight – 3,150 kg; - Mode of operation – pneumatic; - Ram stroke – 900 mm; - Number of blows per minute – 90; - Working pressure – 5 – 7 bar; - Anvil weight – 63 t - Total weight – 100 t.

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, overall weight: 100,000 kg, workpiece weight (max.): 18 kg, Forging hammer HUTA ZIGMUNT type MPM 3000 The same type as MPM 10000 Energy of blow: 10 000 kgm Ram weight: 3 570 kg. Max. ram stroke: 1 000 mm Number of strokes per minute: 90 Total weight: 100 ton Anvil weight: 70 ton The hammer is equipped with modern CNC lubricating unit and set of anti-vibration pads. AHAT SK Ltd., Bulgaria +359 889 433449 Gedpfelnllbjx Ab Doit

Condition: excellent (used), Year of construction: 1983, overall weight: 35,000 kg, Energy of blow: 3 600 kgm Ram weight: 1 250 kg. Gisdpfx Abjtgpdzj Det Max. ram stroke: 800 mm Number of strokes per minute: 110 Total weight: 35 ton Anvil weight: 24 ton

Condition: excellent (used), Year of construction: 1981, overall weight: 64,000 kg, Energy of blow: 7 000 kgm Ram weight: 2 380 kg. Max. ram stroke: 950 mm Number of strokes per minute: 100 Giodpfx Aolnk Tyob Dst Total weight: 64 ton Anvil weight: 47 ton

Condition: excellent (used), Year of construction: 2022, operating hours: 1,619 h, functionality: fully functional, machine/vehicle number: PEC 50 2158273, total height: 3,000 mm, total width: 1,000 mm, total length: 1,000 mm, type of input current: three-phase, input voltage: 400 V, Arm-mounted manipulator with a gripper for cylindrical parts. Gedpfx Asw Hwq Teb Deit

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: KAP1, air demand: 16,000 m³/h, power: 36 kW (48.95 HP), suction capacity: 16,000 m³/h, Equipment: cabin, Dielectric automatic powder booth KAP1 Price: PLN 492,693.30 + VAT Electrical and energy data • Voltage: 400 V (3P + N + PE) • Power connection: 36.34 kW • Pneumatic connection: 1" • Air pressure: min. 6 bar • Air quality: oil < 0.1 mg/m³, water vapor < 1.3 g/m³ • Air consumption: 1710 Nl/min (operation) • Compressor: SC-30 • Air tank: 1800 L Painting parameters • Painting speed: 1933 mm/min • Part dimensions: 800 x 1800 mm • Hanger height: 500 mm • Coating thickness: 100 µM • Gun array: vertical Technical data and configuration • Design: dielectric plastic • Passage dimensions: 1000 x 2400 mm • Air flow: 12348–16000 m³/h • Powder center: ProfiCenter CP02 • Manipulators: 2 pcs. • Guns: 8 automatic, 2 manual (ProfiSpray) • Part detection: yes (height, width) • Systems: cyclone separator, ProfiControl, beam pulling • ATEX: zone 22, II 3D Platforms and cabin body • Platforms: entry, exit, stainless steel floor, anti-slip stairs • Housing: dielectric plastic, LED lighting, slots for manipulators Air knives and suction channel • Automatic floor cleaning • Suction channel with pneumatic flap Gun blow-off and control • Automatic blow-off guns • 10" touch panel, 50 programs, manipulator control, dust extractor, drive speed X-axis and part pulling system • Automatic gun setting • Part pulling: speed 570–2830 mm/min, 2 pullers Godpfxev Rpx Ss Ab Dsit The machine also includes: • ProfiSpray A applicator • PSS-1 controller • PM-1 guns • ProfiCenter CP-02 powder center • CK-D1400L cyclone dust extractor • MA1-180 manipulator and MX1-10 X-axis • OZ-12H dust extractor • ProfiControl 10" control • BP-H2000 W900 part measuring system

Year of construction: 2020, condition: new, ROMER manipulators are characterized by quiet operation. They can be widely used both with simple, as well as complex multidimensional processes Giedpfx Aofz Dmmsb Djt They are programmed using a PLC controller Working with long and short strokes The toothed belt transmission ensures quiet operation Maintenance-free AC motor Narrow column design for space saving. The robust construction of the manipulators ensures great possibilities and high stability. The manipulator is equipped with a 7 "touch panel or is externally controlled via the ModBus protocol with RJ45 cables

Year of construction: 2020, condition: new, ROMER manipulators are characterized by quiet operation. Bmt7r28v0e They can be widely used both with simple, as well as complex multidimensional processes They are programmed using a PLC controller Working with long and short strokes The toothed belt transmission ensures quiet operation Maintenance-free AC motor Narrow column design for space saving. The robust construction of the manipulators ensures great possibilities and high stability. Giodjf Aad Njpfx Ab Det The manipulator is equipped with a 7 "touch panel or is externally controlled via the ModBus protocol with RJ45 cables