Used Fngj 32 for sale (7,678)

Condition: ready for operation (used), Zeiss 608093 9203 ÄZ02 35/05 Path measurement 32 Prismo / Wegmessung 32 Prismo-ST 608093-9203-701, used, as good as new condition, 100% functional Bodey T Dp Aepfx Adrjli

Condition: ready for operation (used), SM 32/200 sliding module, 200 mm stroke, pneumatic linear actuator, used, minor signs of wear, 100% functional, delivery as per photos. Bjdpfx Adoy Rcmhsrjli

Condition: new, Heidenhain LC 192F length measuring system, ML 740 mm, item no. 387 093-32, serial no. 19543276H, unused, in open original packaging, 100% functional. Scope of delivery as shown in the photos. Bledpfji Eal Rox Adroi

Condition: ready for operation (used), Schmalenberger ZHT4 32-13/2-7.5 submersible pump, serial number: 9700005166/1, used, shows normal signs of wear and tear, 100% functional, scope of delivery as shown in the photos. ATTENTION: Please request a separate quote for packaging and shipping costs! Blsdpfxsi D Nvcs Adrei

Condition: used, functionality: fully functional, Year of construction: 2002, operating hours: 16,191 h, load capacity: 13,600 kg, lifting height: 5,250 mm, free lift: 1,390 mm, fuel type: diesel, mast type: duplex, construction height: 4,100 mm, fork carriage width: 2,450 mm, fork length: 1,200 mm, empty load weight: 18,300 kg, total length: 4,800 mm, drive type: Diesel, construction width: 2,550 mm, Diesel forklift Load center: 600 Fork width: 200 mm Fork thickness: 70 mm Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: very good Front tire type: Superelastic Front tire size: 12.00-20 Rear tire type: Superelastic Rear tire size: 12.00-20 Description: In addition to this Svetruck model, we have approximately 200 more heavy-duty forklifts, compact forklifts, forklifts & sideloaders in stock at our Hamburg and Gdansk warehouses. Visit our website - sago-online. Leasing & financing at attractive conditions are always possible. We are also happy to purchase your used equipment directly, even without a trade-in. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this 13.6 60-32 unit. P.S.: Our master forklift workshop specializes in repair, maintenance, refurbishment, and custom builds for forklifts starting at 8 tons. We are also happy to exhibit your vehicle for consignment sale at our site. Bsdjxxdy Ajpfx Adrjli Side shifter, fork positioner, Heater, full cab, full free lift,

Condition: used, Year of construction: 2002, functionality: fully functional, Homag Profi Line CHF 51/32/32 Panel Saw with Cut-Rite software optimization - Year of manufacture: 2002 - Cutting width: 3200 x 3200 - 3 tables with air curtain - Saw projection: 102 mm Blsdpfx Adex Ey Nvsrsi - Cutting height: 85 mm - Main blade 400 mm - Main motor 11.2 kW (15 HP) - Incisor blade with independent motor

Condition: good (used), 965 USED Rego confectionery beater. EXTERNAL DIMENSIONS (in cm.): - length: 68, - height: 167, - width: 64. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. Bjdpovck Ncsfx Adroli ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: good (used), Multi-purpose winch, cable winch, lifting winch, assembly winch, rope winch, universal rope winch -Manufacturer: Tirfor winch, multi-purpose winch type TU 32 with steel cable -Load capacity: 3200 kg -Steel cable: Ø 16.3 mm / Length 30 m -Number: 2x cable pull available -Price: per piece -Dimensions: 680/170/H340 mm Blsdpjw D Ai Asfx Adrei -Total weight: 65 kg/set

Condition: used, Model North - South, clock wise rotation Belt width 600 mm Tiers 32 pcs. Product gap max. ± 89 mm Belt length ± 425 m Infeed height 800 mm Bledpozb Elaofx Adroi Outfeed height 5.800 mm Cooling Freon Power 3 x 400V, 50Hz 45 kW total connected power Required cooling capacity: 150 kW Dimensions (l x w x h) : ± 5.660 x 8.080 x 6.530 mm motor compressors and panels not included

Condition: used, Year of construction: 1999, operating hours: 76,000 h, functionality: fully functional, Technical parameters: • Manufacturer: Nouvo Pignone • Type: ENK 32/45 (1999) extraction-condensing turbine • Nominal output of steam turbine set MWe: 10.2 • Maximum output of steam turbine set MWe: 11.2 • Number of casings: pcs: 1 • Live steam parameters: bar/°C: 40 / 420 • LP steam parameters: bar/°C: 4.0 / 180 • Live steam flow: t/h: 40.8 • IP steam flow: t/h: 15.5 Bjdpfx Ajy Drbuedreli • Pressure in the condenser: bar: 0.14 • Operating hours: 76,000 hours Without control and protection system!

Condition: excellent (used), functionality: fully functional, Very nice foil wrapping and sealing machine for sale. Brand: Beck, type S 17-32, made in Germany. Overhauled in 2017. This machine is equipped with a photoelectric control system and hydraulically operated cylinders. Bledjzdr Ixopfx Adrji This regulates the work cycle according to the length of the product being packaged. This allows for the packaging of parts of varying lengths in any desired sequence. Ideal for fast production. You are welcome to test this machine at our facility. We can arrange transportation and packaging and load it into a truck or container for you. Please request a price including transport (within the Netherlands). Best regards, Henk Hoos.

Condition: used, fuel type: diesel, Year of construction: 2015, MERCEDES ANTOS 25-32 YEAR 2015 EURO 6 LAMBERET REFRIGERATED BOX WITH INTERNAL DIMENSIONS M10.10X2.60XH2.65 REFRIGERATION UNIT CARRIER SUPRA 1150 WITH TEMPERATURE RECORDER AND MOVABLE PARTITION ATP IN FRC -20°C VALID UNTIL 04/2027 ANTEO RETRACTABLE TAIL LIFT 3,000 KG AUTOMATIC TRANSMISSION WITH INTELLIGENT STEERABLE THIRD AXLE ON-SITE FINANCING OR LEASING AVAILABLE Blodpfx Adoy Slpzerji

Condition: used, Length: 285 cm Belt width: 32 cm Side rail height: 11 cm Bljdpfxezdnnzj Adrei Overall height: 24 cm Belt for food processing Stainless steel Manufacturer: Haith Please check out my other listings.

Condition: used, mileage: 520,000 km, power: 256 kW (348.06 HP), first registration: 06/1977, fuel type: diesel, number of seats: 32, gearing type: mechanical, color: beige, Year of construction: 1977, Equipment: parking heater, * Setra 212 HM with 32 seats - 6-speed manual transmission - Toilet - Kitchen - Round seating area * Diesel - 12,675 cm³ - 256 kW - 350 hp - Euro 0 - No emissions sticker required - 8 cylinders - Air suspension * 32 seats + 1 driver - Auxiliary heater - Radio - Simple door at the front and rear * Vehicle dimensions: Length: 10,370 mm x Width: 2,500 mm x Height: 3,090 mm * German vehicle - German vehicle registration document - Sold on behalf of a customer Bjdpjyy T N Sofx Adreli * Errors/printing errors and prior sale reserved - immediately available * Please schedule an appointment for viewing and test drive * Contact: Andreas Vogel * ATTENTION - Vehicles are stored off-site - Please inquire about the exact location - ATTENTION

Condition: good (used), machine/vehicle number: 2617, Year of construction: 2002, load capacity: 10,000 kg, lifting height: 4,560 mm, mast type: duplex, fork carriage width: 70 mm, fork length: 2,400 mm, total length: 4,880 mm, total width: 2,560 mm, operation weight: 16,800 kg, additional equipment features: Weight system, Centralized greasing system, Front mud guards, Rear mud guards, SveTruck 1090-32 from Uniktruck Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Bodpsyuhp Usfx Adrsli Wheel size – Drive wheel: 315/80-22.5 Wheel size – Steering wheel: 315/80-22.5

Condition: ready for operation (used), Tool milling machine, TOS - INTOS FNGJ 40, with 3-axis Heidenhain digital display -Travel distances X/Y/Z: 600x400x400mm -Automatic feed rates / rapid traverse rates in all three axes -Spindle speeds: 63 - 3150 rpm -Tool holder: ISO 40 -Hydraulic tool clamp -Swivel table: 800x400mm -Vertical and horizontal milling capability -Swiveling vertical head with quill -Coolant system -Tool cart / tool holders / milling cutters -Counter bearing / horizontal milling spindle -Tool holder clamping fixture -Machine feet -Documentation Dimensions: L x W x H 2.5 x 2 x 2.3 meters / Weight: 2650 kg Bledpfx Ajzdb Iisdrsi Errors and omissions excepted.

Condition: new, Year of construction: 2026, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 M A With tilting saw blade and sliding table made of anodized aluminium Item number: 5504933 Brand: Holzkraft TECHNICAL DATA Dimensions and Weights Weight (net): approx. 690 kg Dust Extraction Extraction port diameter: 120 mm Saw blade guard extraction port diameter: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Output power (main motor): 7.0 kW Rated duty cycle (main drive): S6 Duty cycle (main drive): 40% Sliding Table and Worktable Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Blodpfx Adjxw N N Hjroi Max. crosscut width left of blade: 3200 mm Edging length: 3200 mm Saw blade tilting range: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Note max. cutting height: independent of scorer Saw blade diameter: 400 mm Note saw blade diameter: independent of scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm EQUIPMENT Scoring unit with separate scoring motor Anodised aluminium sliding table Handle for sliding table On/off switch on sliding table for main and scoring blade motors Edging frame Material roller on edging frame Rip fence with round bar guidance Stops: two professional folding stops Edging shoe Excenter clamp Table extension Table width extension Pendulum-type saw blade guard Motorised height adjustment and tilt of saw unit, digital tilt angle display Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Maximum configuration for the professional user. Combination machine with TERSA cutterblock, miter cutting device and pivoting milling spindle Ø 350 mm main saw blade with a maximum cutting height of 118 mm, which is also achieved when the scoring saw blade is installed Scoring device with separate motor and Ø 120 mm saw blade, easily and conveniently adjustable from the outside Highly precise format sliding table made of anodized aluminum on hardened and riveted steel guide rails Large outfeed table (1200 x 650 mm) with roller and extendable aluminum telescope fence up to a maximum of 3300 mm Saw unit can be pivoted from 90° to -45° Pivoting milling spindle from 90° to -45° to the rear into the milling fence Four milling speeds Right/left rotation of the milling spindle Quick changeover to the thickness planer thanks to parallel-opening planer tables 2-stage feed rate on the thickness table Helical toothed steel feed roller for even wood feed Three independent industrial motors With separate saw parallel fence and separate joiner fence With lockable main switch Equipment details: Format fence Immediate control Outfeed table Outfeed table with angle-adjustable telescope stop with degree scale Sliding table with ball contact system made of anodized aluminum Guides made of hardened and ground steel F550S, 15% harder than conventional steel Guides riveted and not glued easy running, quiet and reliable 10-year HOLZKRAFT warranty on wear of the hardened guide rails Cast iron double-pivot saw unit Height adjustment via dovetail guide extremely robust and torsionally stiff for precise cuts located close to the saw blade, bearing on both sides height- and up to 45° angle adjustable standard scoring unit with separate scoring motor 0.55 kW Double-pivot milling unit large, pivoting double-pivot milling unit made of cast iron Milling fence heavy-duty professional design the high-quality milling fence made of cast iron comes standard with fine adjustment 3-way positionable for quick restoration of the setting with fine adjustment via rack and pinion, digital display and aluminum milling fence cheeks Planing units helical toothed steel feed rollers for a constant and even wood feed massive anti-kickback devices prevent workpieces from kicking back 4-knife Tersa cutterblock ensures an optimal planing result table lips for quieter operation Tersa planing cutterblock No more adjustment and screwing Planer knife change in seconds Self-locking particularly quiet Thickness table The thickness table is mounted on four large-dimensioned spindles, which ensure maximum stability under all working conditions Due to the special lifting device, the table position is maintained without fault, even without locking Parallel fence with fine adjustment and quick clamping stable round bar guide made of ground steel interchangeable aluminum ruler No gap, guide rods are overlapping Separate joiner fence large, professional design (1800 x 150 mm) 0-45° pivotable with quick adjustment stable round bar guide made of ground steel Simultaneous opening Blodpscnxa Sofx Adrji Type: No. 5500557

Condition: good (used), Year of construction: 2012, Lothar Starke Airless piston pump HP 4/32 Lothar Starke Airless unit including spray gun Tripod stand Ratio: 32 / 1 Blsdpfey A Tpqjx Adrei Package with filter Compressed air manometer Good condition Location: in stock at 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Holzkraft Minimax ST 5es – Maximum configuration for professionals Saw-milling combination with miter cutting device and pivoting milling spindle Art. No.: 5501086 Ø 350 mm main saw blade with 118 mm max. cutting height, which is also achieved when the scoring saw blade is installed Scoring device with separate motor and Ø 120 mm saw blade, easily and precisely adjustable from the outside Saw unit can be pivoted from 90° to -45° High-precision format sliding table made of anodized aluminum Large extension table (1200 x 650 mm) With material roller and extendable aluminum telescope stop up to 3300 mm Pivoting milling spindle from 90° to -45° towards the rear into the milling fence Four milling speeds With right/left rotation of the milling spindle Three independent motors With lockable main switch, motor protection switch Supplied as standard with separate saw parallel fence and separate jointing fence for planing Equipment details: Sliding table with ball contact system Made of anodized aluminum Guides made of hardened and ground steel, 15% harder than conventional steel Double-bearing milling unit Pivoting, made of cast iron Mounting points directly on the table, resulting in optimal smoothness Milling spindle mounted high up on precision ball bearings, resulting in low bearing load and maximum possible service life Powerful industrial motors Milling fence Heavy-duty professional design The high-quality milling fence made of cast iron is supplied as standard with fine adjustment 3-way positionable for quick resetting of the setting With fine adjustment via rack and pinion, numerical display and aluminum milling fence jaws Parallel fence With fine adjustment and quick clamping Stable round bar guide made of ground steel Can be conveniently folded down for cutting large workpieces Interchangeable aluminum ruler for narrow workpieces Cast iron double-bearing saw unit Height adjustment via dovetail guide Extremely robust and torsion-resistant for precise cuts Close to the saw blade, bearing on both sides Height and adjustable up to 45° Scoring unit with separate scoring motor 0.55 kW as standard Extension table with angle-adjustable telescope stop with degree grid division Bledpfxjd Hx Hmo Adrji Dimensions and weights Weight approx. 900 kg Dust extraction connection Dust extraction nozzle diameter 3 x 120 mm Dust extraction nozzle diameter saw blade guard 80 mm Drive power Scoring motor 0.55 kW Main motor 2 x 5.0 kW Electrical data Connection voltage 400 V Format sliding table and table Format sliding table width 360 mm Format sliding table height 142 mm Table length 1380 mm Table width 465 mm Milling spindle Spindle inclination 0 – -45 ° Usable length of the spindle 125 mm Spindle speeds 3500/6000/8000/10000 min⁻¹ Milling tool diameter max. Lowerable 240 mm Mortise milling 320 mm Circular saw unit and scoring saw Cutting length 3200 mm Cutting width with parallel fence 900 mm Max. ripping width to the left of the saw blade 3300 mm Saw blade inclination 90 - 45 ° Max. cutting height 90° 104 mm Max. cutting height 45° 68 mm Location: In stock, 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2026, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 With tilting saw blade and anodised aluminium sliding table Article number: 5504932 Brand: Holzkraft Heavy-duty worktable made of strongly ribbed cast iron – for maximum stability and durability Robust welded steel base – ensures high torsional rigidity and vibration-free operation Precision sliding table made of anodised aluminium – smooth running via high-quality ball contact system Carbide guide rails – for lasting precision and minimal maintenance Tilting cast iron saw unit with double segment guide – precise zero-point tilt for highest cutting accuracy Heavy-duty rip fence with round bar guide Equipped with adjustable eccentric clamp Integrated mitre cutting device on the sliding table – for quick and precise mitre cuts Scoring unit with powerful separate drive motor Equipped with high-quality crosscut fence – with heavy-duty telescopic stop, integrated roller for easy loading and unloading, inclined scale for comfortable reading and practical eccentric clamp for secure hold Saw blade speed adjustable in two stages Practical saw blade pendulum guard TECHNICAL DATA Dimensions and Weights Weight (net) approx. 670 kg Extraction Connection Extraction port diameter: 120 mm Extraction port diameter at saw blade guard: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Rated output (motor power): 7.0 kW Duty type (main motor): S6 Duty cycle (main motor): 40% Sliding Table and Table Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. crosscut width left of saw blade: 3200 mm Crosscutting length: 3200 mm Saw blade tilt: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Bodpfxexw N Sbe Adrjli Note on max. cutting height: Independent of the scorer Saw blade diameter: 400 mm Note on saw blade diameter: Independent of the scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm Features Scoring unit: with separate scoring motor Anodised aluminium sliding table Handle for sliding table Crosscutting fence Material roller on crosscutting fence Rip fence: with round bar guide Stops: Two professional folding stops Crosscutting shoe Eccentric clamp Table extension Table widening Saw blade pendulum guard Manual height adjustment and tilting of saw unit Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), Weiss SC 450 Corrosion Testing Device Manufacturer: Weiss Umwelttechnik GmbH Type: SC 450 Corrosion testing device / salt spray testing chamber for salt spray tests, condensation water tests, corrosion testing, material testing, and quality assurance. Technical Data Test chamber volume: approx. 480 liters Test chamber height with hood: approx. 1190 mm Test chamber height without hood: approx. 740 mm Width to spray nozzle: approx. 750 mm Depth: approx. 570 mm External dimensions: Height with hood: approx. 1370 mm Height without hood: approx. 920 mm Width: approx. 1930 mm Depth: approx. 800 mm Temperature range, salt spray test: 5 K above ambient temperature to +50 °C Temperature range, condensation water test: 5 K above ambient temperature to +45 °C Temperature stability over time: ±1 K Brine tank: approx. 180 liters Compressed air: min. 4 bar / max. 10 bar Weight, empty: approx. 180 kg Electrical Data Voltage: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2 kW Rated current: 8.7 A Equipment Liebisch / Weiss control system S!MCON/32 control and regulation unit Color touch panel Acrylic glass nozzle in the spray nozzle Heated compressed air humidifier Flow and dosing system for brine Brine storage tank Test specimen holder / support tubes Floor grate Measurement and connection fittings Testing Procedures Salt spray test according to DIN EN ISO 9227 / DIN 50021 Condensation water test according to DIN EN ISO 6270-2 / DIN 50017 Condition Used equipment from industrial application. Operating hours according to display: approx. 37,926.6 h Optical condition as shown in the pictures. Interior with visible deposits / corrosion marks due to use. Device can be switched on, display is active. Inspection and testing on site possible by arrangement. Scope of delivery: see pictures. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. Bsdpfx Adezbatrereli We will gladly answer any further questions by telephone.

Condition: good (used), Bar length 3000 mm Max bar diameter 65 mm Tubes diameters : 65 mm Dimensions 3900 x 1000 x 1200 mm Weight 1000 kg Bodpfx Adjgvz N Ejroli

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 07/2027, total length: 710 mm, total width: 690 mm, total height: 1,560 mm, electrical fuse: 16 A, input frequency: 50 Hz, empty load weight: 300 kg, Impactor/Mixing machine Fomko F 32 LH Bsdpfx Aoygdchedroli Impactor/Mixing machine Fomko Model: F 32 LH 1 mixing paddle, 1 impact paddle 1 32-liter stainless steel container Powerful and robust technology Connection: 400V, 16A-CEE plug Used machine Visit our large exhibition of bakery machines!

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, DGUV certified until: 07/2027, type of input current: AC, Aquamix 32 – Water mixing and dosing unit Fully automatic water mixing and dosing unit with automatically controlled flow rate and numerical input. Technical data: Temperature inlets: 3 (with ice water) Dosing volume range: 0.1 l - 999.9 l Temperature control range: +0.5°C to +70°C Temperature accuracy: +/-2°C Dosing accuracy from 1 l: +/- 0.1 l Water flow rate at 3 bar: up to 30 l/min Water connection: 3/4" external thread Power connection: 220 - 240V Device dimensions W x H x D: 300 x 300 x 170 mm Bledpfoygdayex Adrei Used device We have other devices in stock!