Used Floating Dredgers for sale (313)
Sort results
- Lowest price Highest price
- Newest listings Oldest listings
- Shortest distance Farthest distance
- Newest year of manufacture Oldest year of manufacture
- Latest update Oldest update
- Manufacturer A to Z Manufacturer Z to A
- Relevance
- Lowest price
- Price
- Highest price
- Price
- Newest listings
- Release date
- Oldest listings
- Release date
- Shortest distance
- Distance
- Farthest distance
- Distance
- Newest year of manufacture
- Year of construction
- Oldest year of manufacture
- Year of construction
- Latest update
- Update
- Oldest update
- Update
- Manufacturer A to Z
- Manufacturer
- Manufacturer Z to A
- Manufacturer
- designation from A to Z
- Description
- designation from Z to A
- Description
- Model from A to Z
- Model
- Model from Z to A
- Model
- Lowest reference
- Ref.No.
- Highest reference
- Ref.No.
- Shortest runtime
- Runtime
- Longest duration
- Runtime
- Relevance
- Relevance
Success:
Your message has been sent.
Listing
Borken
18,513 km
Bystronic Thermoplast Applicator TPA H
BystronicThermoplast Applikator
Call
Condition: used, Bystronic
Type: ERMM180
Thermoplastic Applicator
Application Area
The thermoplastic applicator applies a thermoplastic material to
rectangular glass panes within a production line for solar modules.
The material forms a seal to a second glass pane, which is applied in a later
process step.
The panes are fed in, the material is applied, and the panes are removed on horizontally running
belts/conveyors.
The thermoplastic applicator is a highly advanced machine that must meet many
requirements with great precision. For this reason, you should only process raw materials (glass, sealant) that meet the specifications on
the following pages. This helps to achieve a high-quality and safe
production.
Performance and Connection Values
Maximum transport speed: 18 m/min
Height of the glass running surface: 1100 mm
Height of the applied sealant bead: 0.5 to 1.2 mm
Maximum width of the applied sealant bead: 12.0 mm
Required constant inlet pressure, pneumatics: 6.5 to 8.0 bar
Operating pressure, pneumatics: 6.0 bar
Compressed air consumption, normal operation: 10 normal liters/min
Compressed air consumption during drum change: 500 normal liters/min
Average energy consumption per hour: 10 kWh
Operating temperature of the sealant: 110°C to 130°C
Ambient Conditions and Emissions
Minimum ambient temperature: +15°C
Maximum ambient temperature: +35°C
Maximum relative humidity: 75%
Sound pressure level: less than 70 dB (A)
Requirements for the drums for the sealant
Design:
Material-lid container D18 according to DIN 6644 – with foot (F1)
and smooth outer surface (body design, smooth).
Capacity: 216 liters
Inner diameter: 571.5 mm
Height: 874 mm
Minimum wall thickness: 1.25 mm
Processable glass panes
Glass types
Glass panes with a smooth surface (float glass) can be processed.
Dimensions and weights
Smallest dimensions Largest dimensions Geometry
1198 mm 1200 mm Length LS
498 mm 600 mm Width BS
1.8* mm 5.0* mm Thickness DS
Thermoplastic materials based on poly-isobutylene (butyl) can be processed.
The material must be flowable in the range of approximately 110°C to 130°C and have a defined
viscosity curve.
Only use materials that have proven themselves in practice and have been approved by the
Hodpozdyh Hefx Af Tsfp
manufacturers of these materials and by Bystronic for your intended use.
For detailed product descriptions and information on the handling, storage, and
disposal of the material used, please refer to the information sheets and safety data sheets, which the manufacturers of the materials will gladly provide.
Dimensions of portal robot with glass conveyor
Height x Width x Depth: 2800 x 1890 x 2735 mm
Weight of the portal robot: 850 kg
Weight of the glass conveyor: 1400 kg
Dimensions of drum pumps
Height x Width x Depth: 3320 x 1060 x 1200 mm
Weight (without drum): 850 kg
Weight (with drum): 1100 kg
Height H at drum pump FP1: 4400 mm
Height H at drum pump FP2: 4000 mm
Dimensions of control cabinet
Height x Width x Depth: 2200 x 1800 x 600 mm
Weight: 450 kg
The applicator was used with butyl material.
Condition: used
From a test laboratory, in new condition, only a few operating hours for testing!
Scope of delivery: (See picture)
(Changes and errors in the technical data are subject to change!)
We will gladly answer any further questions you may have over the phone.
Success:
Your message has been sent.
Listing
Bergen op Zoom
18,656 km
IFE SORT fine sorting system
IFE Aufbereitungstechnik GmbHUFS x 600 FD-2LM440T
Call
Year of construction: 2017, operating hours: 2,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 51.I613-020-01, The IFE SORT is a density sorting machine based on the fluidized bed system for fine, dry bulk materials. The function of this air separation table is based on a combination of vibration and air technology. Heavy components are conveyed upwards by vibration, while lighter components are kept suspended by injected air and consequently float downwards.
The applications include recycling and secondary raw material processing, as well as the wood, food, and mining industries.
Hsdpfjzkup Eex Af Tofp
Standard version: consists of a basic unit with a perforated plate insert driven by two unbalanced motors and a fan with a motor.
Nominal width: 600 mm; sieve aperture 0.6 mm
Capacity: up to 3 tons/hour in recycling – however, this is highly dependent on the density and size of the material being processed.
Easy adjustment: of impact angle, amplitude, inclination, speeds, etc.
Design: dust-tight
Control cabinet: is not included; 2 x 500 W unbalanced motors and 1 x 4 kW fan
The machine was in operation at an R&D center in Israel. As the company now operates a production facility in the Netherlands, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered ex works at a port or at the production facility in the Netherlands.
The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.
Success:
Your message has been sent.
Listing
Bergen op Zoom
18,656 km
IFE SORT fine sorting system
IFE Aufbereitungstechnik GmbHUFS 1000xFD-2LM445T
Call
Year of construction: 2017, operating hours: 2,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 51N292010-01, The IFE SORT is a density sorting machine based on the fluidized bed system for fine, dry bulk materials. The function of this air separation table is based on a combination of vibration and air technology. Heavy components are conveyed upwards by vibration, while lighter components are suspended by injected air and consequently float downwards.
The application areas include recycling and secondary raw material processing, as well as the wood, food, and mining industries.
Standard version: consists of a basic unit with a perforated plate insert driven by two eccentric motors and a fan with a motor.
Nominal width: 1000 mm
Capacity: up to 3 tons/hour in recycling – however, this is highly dependent on the density and size of the material being processed.
Easy adjustment: of impact angle, oscillation amplitude, inclination, speeds, etc.
Design: dust-proof
Control cabinet: in an IP 55 housing with a frequency converter for motors and fan, included as standard.
Hedpfx Afjzkvaxe Tjfp
The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in the Netherlands, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production plant in the Netherlands.
The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.
Success:
Your message has been sent.
Listing
Denmark
18,654 km
DMG MORI NZX 2000/800SY
DMG MORINZX 2000/800SY
Call
Condition: ready for operation (used), Year of construction: 2016, operating hours: 28,151 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 210 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 810 mm, controller manufacturer: FANUC, controller model: F31iB with Celos, number of slots in tool magazine: 32, number of axes: 6, This 6-axis DMG MORI NZX 2000/800SY was manufactured in 2016. It features a maximum turning diameter of 320 mm and a swing over bed of 800 mm. The machine is equipped with dual turrets, each with 16 stations, and offers high-speed canned cycle capabilities. If you are looking to get high-quality turning capabilities, consider the DMG MORI NZX 2000/800SY horizontal turning machine we have for sale. Contact us for further details.
• Number of turrets: 2
• Number of tool slots: 2 x 16 stations
• Main electronic connection: Transformer 95 kVA
• Chip conveyor: Yes
• 4 x angel live tools will follow
• 6 x straight live tool holder will follow
• 2 x angel C4 Capto live tool holder will follow
• 10 x capto fix tool holders will follow
• Possible to buy also robot solution
• Well maintained
• Only running stainless steel since day one
• Chuch high/low pressure both spindles
• Spindle 2 tailstock spec
• 7 MPa high pressure Knoll system
• Coolant gun
• Coolant float switch
• Chuck top coolant both spindles
• Airblow for tool tip both turrets
• Airblow for chuck spindle 1
• Oil skimmer
• Autodoor
• Robot IF
• Ethernet IF
• Safety fence IF
• Barfeeder IF
• 10 external M codes
• Handwheel
• Spindle orientation both spindles
• Text engraving function
• High Speed canned cycle
• Program restart
• Island open pockets
• 1 mB storage
• Additional workpiece coordinate 48 sets
• Tool offsets 200 sets
• Swing over bed = 800 mm
• Swing over cross slide 800 mm
• Maximum distance between nose 1130 mm
• Max turning diameter 320 mm
Technical Specification
Counter Spindle Yes
Hodpezkrqyjfx Af Tsfp
Driven Tools Yes
Success:
Your message has been sent.
Listing
Burghaun
18,457 km
Seppi M. H7 125 flail mulcher with rotary swivel / floating
SeppiM. H7 125 Schlegelmulcher Drehkranz / flottierend
Call
Condition: new, working width: 1,250 mm, For inquiries regarding the attachment, please contact Mr. Herden (phone number available upon request).
Seppi M. H7 125 flail mower / incl. swivel ring / incl. floating mounting / NEW unit / in stock & immediately available
Price: €17,890.00 net / €21,289.10 gross
- Working width: 125 cm
- Overall width: 140 cm
- Depth: 97 cm
- Height: 57 cm
- Weight: 410 kg without accessories
- mulches grass and light brush up to 7 cm in diameter
- for excavators from 5 to 15 tons
- Universal interface for mounting various adapter plates
- S420: double-walled housing made of high-strength S420 steel
- WEARPLATE: Housing: with replaceable wear plates
- LOW PROFILE: Low profile design
- Indirect V-belt drive with 4 V-belts
- Drive designed for hydraulic motor depending on the
flow rate of the carrier machine
- 4D ROLLER: reinforced support roller 152 mm Ø, with double tapered roller bearing, height adjustable
- COUNTER CUTTERS: two rows of replaceable forged counter blades
- Rotor wall thickness: 12.5 mm
- Front protection with chains
- Rear protection made of rubber
- Color: red RAL3020 · anthracite RAL7021
OPT 371 HELIX ROTOR TECHNOLOGY
- Triple helix rotor with SMO flail (standard)
- 12 pieces, part number 130.02.001
OPT 291 VARIO FLOW
- Axial piston hydraulic motor with variable displacement 29-58 cm³ and pressure relief valve
- Displacement in cm³ (min-max): 29 - 58
- Required hydraulic pressure in bar (min-max): 100 - 300
- Required hydraulic flow rate in l/min (min-max): 55 – 150
OPT 099 Floating mounting (parallelogram guidance)
OPT 555 Swivel adapter
OPT 372 hydraulic 190° swivel device
Hodjy E Etyopfx Af Tofp
3 hydraulic lines are required: feed, return and leakage oil.
Optional: MS08 adapter plate incl. screws and mounting = €880.00 net
Many more adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available.
In our warehouse, we have a very large selection of various Seppi M. products that are immediately available!
Mr. Herden (phone number available upon request) will be happy to assist you.
Upon request, we will also be happy to provide you with a financing offer.
We are an official Westtech sales and service partner.
We are an official OilQuick sales and service partner.
We are an official Holp sales and service partner.
We are an official Magni telehandler sales and service partner.
We are an official DMS sales and service partner.
We are an official Gierking GMT sales and service partner.
We are an official Weber MT sales and service partner.
We are an official Seppi M. sales and service partner.
We are an official JCB construction machinery sales and service partner.
We are an official Mercedes-Benz sales and service partner.
We are an official Iveco sales and service partner.
In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany.
We supply the complete Seppi M. range for you!
Errors and prior sale are subject to change!
Intended use: Agriculture
Please contact Marius Herden for more information.
Discover more used machines
Success:
Your message has been sent.
Listing
Ivanja Reka
18,241 km
CNC machine tending FANUC robot cell
Teximp d.o.o.URC-12
Call
Condition: new, Year of construction: 2026, functionality: fully functional, load capacity: 12 kg, arm reach: 1,441 mm, controller manufacturer: FANUC, controller model: R-30iB Plus (A-Cabinet), teach pendant manufacturer: FANUC, teach pendant model: iPendant Touch, type of input current: three-phase, repeat accuracy: 0.02 mm, warranty duration: 24 months, Equipment: documentation/manual, Basic information:
Teximp Universal Robot Cell is an all inclusive robotic automation solution for your CNC machine. The URC-12 is based on Fanuc M-10iD/12 robot arm suitable for middle size machines.
It consists of:
1) Robot:
- Fanuc robot M-10iD/12
6-axis vertical robot
Load capacity 12 kg / reach 1441mm
R-30iB Plus controller
A-cabinet
I/O modules; DI16 / DO16
Hfsdj Afx Ryspfx Af Tep
DCS Dual Check Safety Position (J567)
Soft Float (J612)
Touch Skip (J921)
Singularity Avoidance (R792)
User Socket Messaging (R648)
Karel (R632)
2) Part Table:
Compact but heavy part table with front entrance.
Table size 980 x 700mm
Three pins for quick pallet changing
Reer safety light curtain, cat.4
Control button 3
LED status beacon
Electrical cabinet and cables
3) Safety Options
The Cage is our standard solution. All URC cells can also be delivered in the "Laser" version, which is designed for optimal accessibility. The price of the cells remains the same regardless of the chosen version.
- Cage (Standard)
- Omron Laser (Alternative)
- Reer Light Curtain (Standard)
4) Interface to the Haas machines
Teximp Robot Interface includes all needed to connect the URC to any Haas machine. Support Haas Mill and Lathe machines, with NGC and CHC control. (If your machine is not Haas, we can adjust robot-machine interface. Note: this will be additionally charged)
Communication CNC < = > URC, I/O, M-fin, safety
Preparing for a Clamping device
(2nd clamping device available)
Preparing for a PAD
Preparing for an external Air Blow
5) Gripper Configuration
The Teximp Gripper Interface includes everything needed for clamping parts on the robot side.
- Gripper carrier 90°
Schunk Gripper JGP-P 100-2 (2 pcs)
Stroke per jaw [mm] = 5
Recommended workpiece weight [kg] = 8.75
ABR-PGZN-plus 100 blanks made of aluminum for rework by the customer
Sensors G1/G2 - clamped/unclamped
Blower nozzle
Other possibility:
- Gripper carrier 180°
Schunk Gripper JGZ 100-1 (2 pcs)
Stroke per jaw [mm] = 10
Recommended workpiece weight [kg] = 9
Sensors G1/G2 - clamped/unclamped (4 pcs)
Blower nozzle
6) Automatic Door system
Our robot cell includes an Auto Door for any Haas machine, with two available solutions: the original Haas Smart CAN DC Auto Door for machines built in 2020 and later, or Teximp’s Pneumatic Auto Door for older machines.
PAD-HaasVF-side
PAD-HaasVF-front
PAD-HaasMM-front
PAD-HaasST
PAD-HaasUMC
- PADs for machines without the original side door/window are also available.
7) Programming Option (HMI)
Enables intuitive interaction with Teximp robotic systems through a visual interface, facilitating configuration, monitoring, and optimization of operations. It allows operators to program quickly and easily, without the need for Fanuc programming knowledge. Operators can easily adjust jobs for different products/parts and then save them as "Recipes", enabling a complete robot setup change with just one click on the screen. This simplifies the programming process and minimizes downtime.
- Easy visual programming
- No additional hardware required
Note:
- We provide transport, installation, commissioning and operator training at additional cost.
- You will have our full support during the ramp-up phase of the robotic cell, as well as for all other needs and requirements regarding our system.
Success:
Your message has been sent.
Listing
Ivanja Reka
18,241 km
CNC machine tending FANUC robot cell
Teximp d.o.o.URC-12D
Call
Condition: new, Year of construction: 2026, functionality: fully functional, load capacity: 12 kg, arm reach: 1,441 mm, controller manufacturer: FANUC, controller model: R-30iB Plus (A-Cabinet), teach pendant manufacturer: FANUC, teach pendant model: iPendant Touch, type of input current: three-phase, repeat accuracy: 0.02 mm, warranty duration: 24 months, Equipment: documentation/manual, Basic information:
Teximp Universal Robot Cell is an all inclusive robotic automation solution for your CNC machine. The URC-12D is based on Fanuc M-10iD/12 robot arm suitable for middle size machines and specifically adapted for handling vices.
Hsdpfx Ae Af Iiwof Tjfp
It consists of:
1) Robot:
- Fanuc robot M-10iD/12
6-axis vertical robot
Load capacity 12 kg / reach 1441mm
R-30iB Plus controller
A-cabinet
I/O modules; DI16 / DO16
DCS Dual Check Safety Position (J567)
Soft Float (J612)
Touch Skip (J921)
Singularity Avoidance (R792)
User Socket Messaging (R648)
Karel (R632)
2) Drawer palletizing system:
Usable space per one drawer: 1000 x 480mm
Max 5 drawers (depends on the height of the pieces)
Load capacity of one drawer: 250 kg
Reer safety light curtain, cat.4
Drawer opening possible from both sides
LED status beacon
Electrical cabinet and cables
3) Safety Options
The Cage is our standard solution. All URC cells can also be delivered in the "Laser" version, which is designed for optimal accessibility. The price of the cells remains the same regardless of the chosen version.
- Cage (Standard)
- Omron Laser (Alternative)
- Reer Light Curtain (Standard)
4) Interface to the Haas machines
Teximp Robot Interface includes all needed to connect the URC to any Haas machine. Support Haas Mill and Lathe machines, with NGC and CHC control. (If your machine is not Haas, we can adjust robot-machine interface. Note: this will be additionally charged)
Communication CNC < = > URC, I/O, M-fin, safety
Preparing for a Clamping device
(2nd clamping device available)
Preparing for a PAD
Preparing for an external Air Blow
5) Gripper Configuration
The Teximp Gripper Interface includes everything needed for clamping parts on the robot side.
- Gripper carrier 90°
Schunk Gripper JGP-P 100-2 (2 pcs)
Stroke per jaw [mm] = 5
Recommended workpiece weight [kg] = 8.75
ABR-PGZN-plus 100 blanks made of aluminum for rework by the customer
Sensors G1/G2 - clamped/unclamped
Blower nozzle
Other possibility:
- Gripper carrier 180°
Schunk Gripper JGZ 100-1 (2 pcs)
Stroke per jaw [mm] = 10
Recommended workpiece weight [kg] = 9
Sensors G1/G2 - clamped/unclamped (4 pcs)
Blower nozzle
6) Automatic Door system
Our robot cell includes an Auto Door for any Haas machine, with two available solutions: the original Haas Smart CAN DC Auto Door for machines built in 2020 and later, or Teximp’s Pneumatic Auto Door for older machines.
PAD-HaasVF-side
PAD-HaasVF-front
PAD-HaasMM-front
PAD-HaasST
PAD-HaasUMC
- PADs for machines without the original side door/window are also available.
7) Programming Option (HMI)
Enables intuitive interaction with Teximp robotic systems through a visual interface, facilitating configuration, monitoring, and optimization of operations. It allows operators to program quickly and easily, without the need for Fanuc programming knowledge. Operators can easily adjust jobs for different products/parts and then save them as "Recipes", enabling a complete robot setup change with just one click on the screen. This simplifies the programming process and minimizes downtime.
- Easy visual programming
- No additional hardware required
Note:
- We provide transport, installation, commissioning and operator training at additional cost.
- You will have our full support during the ramp-up phase of the robotic cell, as well as for all other needs and requirements regarding our system.
Success:
Your message has been sent.
Listing
Głosków
17,705 km
Band saw
MEBAMebaratio 300
Call
Condition: excellent (used), Year of construction: 2021, functionality: fully functional, German band saw MEBA Ratio 300
-Semi-automatic
-two-column
-cutting diameter 300mm
-max dimension 300x500
-floating speed control (inverter)
-4800x34x1.1 belt
-cooling systems
-fast vise clamping
-belt cleaning
-feed auxiliary roller
-feeding table (not in the picture)
-German WIKUS cutting belts new 10 pcs (value about 3000 zł)
-CE
Hfedpfoug Hpzsx Af Tep
-net price
-possible delivery to any place in the country
Machine very little used like new from 2021 in perfect technical condition .
SPECIALIZATION ( since 1987 on the market! ) METAL saws & Largest selection in the country
I have other band saws for metal of all types and bring on
individual orders professional equipment
from 200mm>1000mm diameter cutting material
Automatic / Semi-automatic / Manual
NO ! is a "Chinese" like many offered here branded professional machines !!!
ONLY PROFII MACHINES !!!
BE SURE TO SEE MY OTHER AUCTIONS !!!
I SELECT MACHINES W/ INDIVIDUAL NEEDS !
YOU NEED A GOOD MACHINE AT A GOOD PRICE CALL
Success:
Your message has been sent.
Listing
Tata
18,035 km
Coordinate measuring machine
Coord3 ARES NT-L 7.7.5
Call
Condition: excellent (used), Year of construction: 2014, functionality: fully functional, overall weight: 980 kg, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 500 mm, Coordinate measuring machine Coord3 ARES NT 7.7.5
Year of manufacture: 2014
Motorized indexable head Renishaw PH10M
hand controller: Renishaw MCU LITE-2
MPEe accuracy: 2.5 µm + L/300
Repetition accuracy: from 2.3 µm
Measuring range: 700 x 700 x 500 (mm)
Hfodpfxeu E U Hbs Af Tep
Granite bed size: 1330x963.5x170mm
Software: TouchDMIS 5.2 + dongle
The Z-axis support column is made of silicon carbide, which increases rigidity. DC servo motors, air bearings on all axes, free-floating linear scales with 0.1 µm resolution.
Success:
Your message has been sent.
Listing
南阳市
10,416 km
Glass tempering furnace
NothGlassBU1Е60
Condition: reconditioned (used), Year of construction: 2022, functionality: fully functional, power: 1,143 kW (1,554.05 HP), warranty duration: 12 months, # NorthGlass BU1E60 Glass Tempering Furnace – Fully Refurbished – 12-Month Warranty
We offer for sale a NorthGlass BU1E60 horizontal glass tempering furnace equipped with a forced convection heating system.
The furnace is pre-owned and has undergone a comprehensive refurbishment, including the replacement of major mechanical, electrical, and electronic components.
Refurbishment work includes the replacement of:
- Heating elements
- Ceramic rollers
- Electric motors
- Automation and control systems
- Electronic components
The furnace has been fully refurbished and prepared for further industrial operation.
Warranty: 12 months.
### Main Technical Specifications
- Manufacturer: NorthGlass (China)
- Model: BU1E60
- Condition: Used, fully refurbished
- Maximum glass size: 2,850 × 6,000 mm
- Minimum glass size: 300 × 300 mm
- Glass thickness: 5–22 mm
- Heating system: Forced convection
- Convection system: 6 high-temperature upper convection fans with variable frequency control
- Production capacity: 16–18 batches/hour (5 mm clear glass)
- Heating power: 1,143 kW
- Quenching fan power: 2 × 220 kW
- Rated electrical capacity: 1,100 kVA
- Minimum Low-E emissivity: ε = 0.04
- Quality standard: GB15763.2-2005
### Supported Glass Types
- Clear float glass
- Low-E coated glass
- Patterned glass
- Body-tinted glass
### Equipment Configuration
The furnace includes:
- Loading table
- Heating section
- Flat glass quenching section
- Unloading table
- Electrical control system
Hfodpfoz Rv Dpex Af Tsp
- Frequency converters
- Air circulation system
- Quenching fans with vibration isolation frames
### Key Advantages
- Fully refurbished with replacement of major components
- Advanced forced convection heating technology
- Suitable for processing Low-E glass
- Large processing capacity of up to 2,850 × 6,000 mm
- High productivity of up to 18 batches per hour
- 12-month warranty
- Cost-effective alternative to purchasing a new glass tempering furnace
### Price and Delivery
Price: Upon request
Delivery terms and additional technical information are available upon request.
Contact us for a detailed quotation, additional photographs, videos, and technical documentation.
Success:
Your message has been sent.
Listing
Saasveld
18,476 km
Sink-float tank, centrifuge, screen
AMA recycling technologies
Call
Condition: new, Year of construction: 2026, functionality: fully functional, The STF 3.0 float-sink separator with a highly efficient SP1000 Mk2 centrifuge and VS1 water screen. A compact yet powerful washing system that requires little maintenance and can wash and sort up to 3,000 kg/h of hard plastics.
Hjdpfx Aexhf H Nef Tofp
The machines are constructed entirely from 304 stainless steel, allowing salt solutions to be used without any issues.
A zinc float tank with centrifuge, water screen and big bag station is in stock and available for immediate delivery; further machines are available to order.
Please contact us for further information.
Success:
Your message has been sent.
Listing
Vitez
18,130 km
LiSEC ESL-6030RS-L
LiSECESL-6030RS-L
Call
Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 030-062962, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, pressure: 8 bar, cutting length (max.): 6,000 mm, LiSEC ESL-6030RS-L – Automatic Glass Cutting Line
Complete automatic LiSEC line for precise and high-speed cutting of float, Low-E and laminated glass. Manufactured in 2013, the line consists of four interconnected components that together form a complete system for glass loading, transport, cutting and breaking.
The cutting table is equipped with a magnetic drive and a Low-E coating removal head, allowing coating removal and glass cutting within the same process.
Line Components:
1. Float and Low-E Glass Cutting Table
- Model: LiSEC ESL-60/30RS-L
- Serial number: 030-062962
- Year of manufacture: 2013
- Glass thickness: 2–19 mm
- Cutting of straight and irregular shapes
- Low-E coating removal system
2. Laminated Glass Cutting Table
- Model: LiSEC VB-33
- Serial number: 040-014769
- Year of manufacture: 2013
- Designed for cutting laminated glass
- Supported configurations: 33, 44, 55, 66 and 88
3. Glass Breaking Table
- Model: LiSEC BTS-37/33
- Serial number: 054-054715
- Year of manufacture: 2013
- Weight: 1,525 kg
- Maximum load: 55 kg/m²
- Power supply: 400 V, 50 Hz
- Connected load: 10.89 kVA
- Operating pressure: 8 bar
- Protection rating: IP32
4. Tilting and Transport Table
- Model: LiSEC ATH-60/30FD
- Type: Double-Sided Moveable Glass Un/Loading Station
- Serial number: 011-071248
- Year of manufacture: 2013
- Weight: 6,040 kg
- Maximum load: 48 kg/m²
- Power supply: 400 V, 50 Hz
- Connected load: 7.80 kVA
- Operating pressure: 6 bar
- Equipped with new mechanisms and vacuum suction cups for handling glass sheets
Condition:
Hodpfx Afsz Ilrio Tsfp
- The complete production line is in good working condition and fully operational,
- Documentation and additional technical information are available upon request,
- A set of spare parts is included with the production line, along with an estimated value of the spare parts,
- The production line will be available for collection from December 2026,
- On-site inspection of the machinery is possible by prior arrangement.
Note:
- Glass racks for jumbo glass sheets are not included in the sale (we provide drawings for their construction)
- The metal guideways in the floor for the Tilting and Transport Table are not included in the sale
Success:
Your message has been sent.
Listing
Heidelberg
18,605 km
Municipal vehicle / implement carrier
HolderC270
Call
Condition: used, functionality: fully functional, first registration: 11/2011, fuel type: diesel, color: orange, fuel: diesel, gearing type: automatic, suspension: steel, Year of construction: 2011, operating hours: 2,024 h, Equipment: air conditioning, all wheel drive, car registration, cruise control, differential lock, hydraulics, navigation system, trailer coupling, Holder C270
Drive system
4-cylinder, 4-stroke Kubota diesel engine, Type 2607, 49.2 kW / 67 hp in the C 270
Hydrostatic all-wheel drive via four wheels of equal size,
Stepless speed selection with a total of four pre-selectable driving ranges
Hydraulic wheel load compensation (combined independently and dependently)
Mechanical differential lock, front and rear, can be switched on simultaneously electrohydraulically
Hydraulic service brake and electric parking brake as a drum brake
Suspended front and rear axles
Cab
including heating
High roof
Heat-insulating glazing and sliding windows on the sides
Multifunction display (tachometer, operating hour counter, speed indicator, remote thermometer for engine and hydraulic oil, fuel level indicator)
Mechanically adjustable steering column
3 storage compartments, sunshade film, interior cab light with door contact switch
Hydraulics
Multifunction arm console with driving program and differential lock switch
Hydrostatic articulated steering with 2 double-acting steering cylinders
Additional equipment
Mounting frame for tool-free switching between platform and attachments
Locking rail at the front for adjusting the upper link
Electrical system: AC alternator 12 V / 90 A – 1080 W
Battery 12 V / 88 Ah
Battery disconnect switch
Radio: wiring harness, antenna, speaker covers
Lighting system according to StVZO (German Road Traffic Licensing Regulations)
7-pin socket at the rear
Wiring prepared for rear marker light via Super-Seal plug
Biodegradable hydraulic oil
Stainless steel support pad
Standard paint finish: orange RAL 2004 and gray RAL 7021
Front linkage
Front linkage including safety hook, CAT II/CAT I
with passive tilt adjustment
Rotating beacon
Locking bracket
Hydraulic flow divider 1
Flow divider, circuit 1, adjustable from 0–25 l/min
with line set to the front and rear
Return line to the front and rear
Hydraulic set, attachment control pump
Attachment control pump, 0–80 l/min, variable
Line set to the front and rear
Return line to the front and rear
Leakage oil line to the front and rear
Hydraulic tipping device
for implement arms
Hydraulic set 2
3 double-acting control valves
2 with floating position
6 quick-release couplings
2 quick-release couplings at the rear, connected to the front via a T-piece with quick-release couplings
Active hydraulic tilt adjustment
1 multifunction joystick for 5 double-acting functions
including direction switch and speed control
Hodpozdkc Ujfx Af Tsfp
Comfort package
Driver's seat with air suspension, armrest, air conditioning
Hydraulic tipping device for cab
Rear view camera
2 work lights at the rear
Ball head, permanently mounted
1 NEW DIESEL ENGINE KUBOTA WITH 12 MONTHS FACTORY WARRANTY!!!
In addition, the following options are available at an extra charge:
1. PRICE INCREASE
PLATFORM, DEMO UNIT
Platform 1250 x 1060 x 300 mm
(can be retrofitted at any time) – currently installed €2,750 plus VAT
2. PRICE INCREASE
TOWING HITCH, NOT SELF-ADJUSTING, HEIGHT ADJUSTABLE, DEMO UNIT
€470 plus VAT
3. PRICE INCREASE
Retrofitting manual central lubrication system
€1,600 plus VAT
4. PRICE INCREASE
HYDRAULIC REAR PTO
€1,990 plus VAT
Subject to change, typing errors, mistakes and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.
Success:
Your message has been sent.
Listing
Edewecht
18,361 km
SCM P80 panel saw
SCMGABBIANI P80
Call
Condition: excellent (used), Year of construction: 2021, Sale on behalf of customer.
SCM Gabbiani P80 Panel Saw – Year 2021 – 4300 x 4300 mm
For sale is a state-of-the-art SCM Gabbiani P80 panel saw, manufactured in 2021 and in excellent condition. The machine was used in an active carpentry workshop and impresses with its precision, speed, and high reliability in daily operations.
Technical Specifications:
Cutting length: 4300 mm
Cutting width: 4300 mm (large version)
Cutting height / blade protrusion: 80 mm
Main saw blade diameter: Ø 340 – 370 mm
Scoring saw blade diameter: Ø 200 mm
Main saw blade speed: approx. 4,650 rpm
Scoring blade speed: approx. 5,850 rpm
Drive & Power:
Main motor: approx. 7.5 – 15 kW (depending on configuration)
Scoring unit: approx. 1.3 – 1.5 kW
Total connected load: approx. 12 – 15 kW
Voltage: 400 V / 50 Hz
Hfjdpfsylp S Ejx Af Tsp
Speeds:
Saw carriage: 6 – 60 m/min (stepless)
Pusher speed: up to 60 m/min
Pneumatics & Extraction:
Compressed air requirement: approx. 300 NL/min / 7 bar
Extraction capacity: approx. 2,200 – 2,400 m³/h
Extraction ports: 4 x 120 mm
Features & Equipment:
Air flotation tables for easy handling of large panels
Floating clamps for precise cutting
Scoring unit for chip-free cuts
PC/PLC control (Maestro system possible)
Robust industrial design for high workload
High repeatability and cutting quality
Material suitability:
Suitable for:
Chipboard
MDF / HDF
Multiplex / plywood
Coated panel materials
The machine is fully operational and ready for use.
Viewing possible anytime by appointment.
Location: Germany
If you are interested, please get in touch – further photos, videos, or detailed information are available upon request. Dismantling and delivery can be arranged at additional cost.
Success:
Your message has been sent.
Listing
Diest
18,668 km
Tiltable glass cutting machine
LISECBSV 60-33 S
Call
Condition: excellent (used), Year of construction: 2011, functionality: fully functional, total length: 8,200 mm, total width: 3,800 mm, overall weight: 5,250 kg, Tiltable automatic float glass cutting table
for jumbo sizes : 6000 x 3210 mm
min. glass size : 350 x 180 mm
glass thikness : 2,3 - 19 mm
Hedpfx Afjz N Dquj Tsfp
This table has NO option for low e deletion
Success:
Your message has been sent.
Listing
Rohrbach
18,794 km
Joinery machine
HundeggerSpeed Cut 480
Call
Condition: like new (used), Year of construction: 2024, functionality: fully functional, For sale is a like-new Hundegger Speed-Cut SC480, including a fully automatic loading system, Pick & Feed 1000.
Hfedpfx Afoz Da Hto Tep
Speed Cut SC480
Processing range:
- Timber cross-sections from 20 × 40 mm to 240 × 480 mm
- Timber lengths up to 13 m
Equipment:
- 5-axis sawing unit
- Infeed and transfer cross conveyor for timber lengths up to 13 m
- Hydraulic lifting table for timber lengths up to 13 m
- Combination support for vertically operating tools
- Drilling unit 3 kW, drilling direction vertical
- Vertical finger milling cutter 6.5 kW
- 4-axis revolving milling cutter 7.5 kW
- Drilling unit 3 kW, drilling direction horizontal
- Single-blade milling cutter
- Marking device at the rear
- Inkjet labeling system HP (from the rear)
- Label printer at the control panel
- Central lubrication
- Additional screen at the control panel
- Additional screen in the discharge area
- Floating dust extraction
Pick & Feed 1000
Fully automatic loading system:
- For timber lengths up to 13 m
- 10 rack positions
Special features:
- System has been in operation since January 2025
- Extensive special equipment
- Immediately ready for use
- Ideal for timber construction, prefabricated construction, and joinery businesses
Inspection:
The machine can be inspected by appointment. We will gladly provide further technical information, photos, or videos.
Location: Switzerland, Canton of Bern
Success:
Your message has been sent.
Listing
Ivanja Reka
18,241 km
CNC machine tending FANUC robot cell
Teximp d.o.o.URC-35P
Call
Condition: new, Year of construction: 2026, functionality: fully functional, load capacity: 35 kg, arm reach: 1,831 mm, controller manufacturer: FANUC, controller model: R-30iB Plus (A-Cabinet), teach pendant manufacturer: FANUC, teach pendant model: iPendant Touch, type of input current: three-phase, repeat accuracy: 0.03 mm, warranty duration: 24 months, Equipment: documentation/manual, Basic information:
Teximp Universal Robot Cell is an all inclusive robotic automation solution for your CNC machine. The URC-35P is based on Fanuc M-20iD/35 robot arm adapted for handling pallets or vises.
It consists of:
1) Robot:
Fanuc robot M20iD/35
6-axis vertical robot
Load capacity 35 kg / reach 1831mm
R-30iB Plus controller
A-cabinet
I/O modules; DI32 / DO32
DCS Dual Check Safety Position (J567)
Soft Float (J612)
Touch Skip (J921)
Singularity Avoidance (R792)
User Socket Messaging (R648)
Karel (R632)
2) Loader Table:
Compact but heavy loader table with front entrance.
Table size: 980 x 700 mm
Docking station with four pockets
Three locating pins for quick pallet exchange
ReeR safety light curtain, Cat. 4
Three control buttons
LED status beacon
Electrical cabinet and cables included
3) Pallet Rack
The URC-35 Palletizing cell can be equipped with 1 or 2 large-capacity racks with 42 pockets.
Large rack (42 pockets) - included as standard
Second large rack (42 pockets) - optional
4) Vices & Zero-point clamping system
The system is designed for:
- Lang Vices (not included in price)
- Lang Zero-Point clamping system (not included in price)
- Note: it can also be implemented to work with pallets instead of vices (not included in price)
5) Safety Options:
Cage (standard)
ReeR safety light curtains (cat.4) on Loader table (standard)
Plexiglass cover on Racks (standard)
ReeR Mosaic M1 safety controller (standard)
6) Interface to the Haas machines
Teximp Robot Interface includes all needed to connect the URC to any Haas machine. Support Haas Mill and Lathe machines, with NGC and CHC control. (If your machine is not Haas, we can adjust robot-machine interface. Note: this will be additionally charged)
Communication CNC < = > URC (I/O, safety, program call -> all via Ethernet cable communication)
Preparing for a Clamping device
Preparing for a PAD
Preparing for an external Air Blow
7) Gripper Configuration
The Teximp Gripper Interface includes everything needed for gripping the vices
Gripper carrier
Schunk Gripper JGP-P 160-2
Stroke per jaw [mm] = 8
Recommended workpiece weight [kg] = 24.5
Preparation for vice/pallet clamping
Sensors for gripper state detection - clamped/unclamped
Blower nozzle
Laser sensor (for vise presence detection)
8) Automatic Door system
URC-35 Palletizing can be equipped with a pneumatic auto door (PAD) for selected Haas machines. Available PAD models include:
a) PAD-HaasUMC-side
b) PAD-HaasVF-side
c) Can be made for other machines (not included in price)
Hsdpfs Af Uxxjx Af Tjfp
9) Programming Option (HMI)
Enables intuitive interaction with Teximp robotic systems through a visual interface, facilitating configuration, monitoring, and optimization of operations. It allows operators to program quickly and easily, without the need for Fanuc programming knowledge.
Important Note: Operators can easily assign different .nc machining program to each Vise via HMI, robot calls assigned program on CNC machine by scanning QR code on each vise!
- Easy visual programming
- No additional hardware required
Note:
- We provide transport, installation, commissioning and operator training at additional cost.
- You will have our full support during the ramp-up phase of the robotic cell, as well as for all other needs and requirements regarding our system.
Success:
Your message has been sent.
Listing
Cesena
18,572 km
Plate rolling machine
DAVIMCO3034 PLATE ROLL
Call
Condition: used, functionality: fully functional, Year of construction: 1997, machine/vehicle number: 9730010, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 340 mm, side roll diameter: 300 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 25 mm, sheet thickness brass (max.): 25 mm, sheet thickness copper (max.): 25 mm, overall weight: 9,000 kg, total length: 5,500 mm, total width: 1,600 mm, total height: 1,500 mm, input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 3-roll hydraulic plate bending machine with pre-pinch
Model MCO3034 Davi capacity 3000x20 mm
-Plate width 3000 mm
-Capacity rolling 20 mm
-Prebend 16 mm
----- TECHNICAL DATA
Top roll 340 mm
Surface on the rolls 3050 mm
MINIMUM ROLLING DIAMETER ID 430 MM
depending on plate thickness and plate yield strength
CONFIGURATION:
-Rolls hardened high strength surface
-Conical plate bending attachment hydraulic
-Digital position readouts
2xplate support left and right side hydraulic ( see photo )
-3 rolls driven hydraulic powered with individual motor & gear box on each roll.
-Parallelism between top and bottom rollers by torsion bar.
-Rolls installed on bearings
-Overload safety hydraulic protection of the rolls
-Synchronized speed hydraulic rotation of the rolls.
-Hydraulic unit self enclosed into the machine.
-Speed infinitely variable control with leverage hydraulic distributor
-Centralized operator control panel hinged on the front floating left right
Hodpfszwuu Uex Af Tefp
-Emergency shutdown and safety stop system
-Manuals original
Success:
Your message has been sent.
Listing
Poznań
17,936 km
M&P engineering onion peeler
Onion peeler M&P
Call
Condition: like new (used), functionality: fully functional, Year of construction: 1999, operating hours: 24 h, overall weight: 1,200 kg, total width: 1,000 mm, total height: 2,500 mm, I am selling stainless steel MK2 M&P engineering onion peeler, machine is fully refurbished, after full service & ready to work.
The large onion peeler from M&P engineering tops, tails and peels onions of 45mm to 115mm diameter using self adjusting floating knife assemblies over a range of up to 25mm on any one setting. It then slits the onion horizontally from top to tail, the depth of slit is determined by onion quality and grade. The machine finally removes the skin using compressed air providing an end product of optimum appearance.
Link for video presentation by producer:
Hfsdpfx Asurb R Esf Top
Excluded air screw compressors but for serious enquire i could help out with additional equipment.
Capacity 2700- 4500 kg /h of peeled onion
Success:
Your message has been sent.
Listing
Germany
18,654 km
AGIE Progress 3
AGIEProgress 3
Call
Condition: ready for operation (used), Year of construction: 2006, operating hours: 3,422 h, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 430 mm, wire diameter (max.): 0.33 mm, overall weight: 3,900 kg, table load: 800 kg, controller manufacturer: AGIE, controller model: Vision, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis AGIE Progress 3 wire EDM machine was manufactured in 2006. It features travel paths of 500 x 350 x 430 mm and a maximum workpiece weight of 800 kg. The machine is equipped with the AGIE Vision control unit and includes various near-new clamping systems and a wire alignment device. If you are looking to get high-quality erosion capabilities, consider the AGIE Progress 3 wire EDM machine we have for sale. Contact us for further details.
Technical overhaul of the machine in 2025
- Drive Motor M30- Motor with Pinion (tested)- MSS Central Control Unit (24V AC/DC)- Pressure Hoses- Dual Level Floats (S130)
• Max. Workpiece Weight: 400 / 800 kg
Hfjdjz Ert Iepfx Af Top
• Max. Taper Angle: 30° / 100 mm
• Space Requirement (L x W x H): 2.8 x 2.4 x 2.3 m
• Power Frequency: 50 Hz
• Nominal Power: 12.1 kVA
• Rated Current: 17.5 A
• Short-circuit Current: 10 kA
• Cabinet / Generator Type: CABINET (IPG-CNC 02D)
• Additional Equipment & Accessories: Various near-new clamping systems, wire alignment device
Success:
Your message has been sent.
Listing
Tata
18,035 km
Rubber internal mixer
Bainite 95 L IM rubber mixer
Call
Condition: like new (used), Year of construction: 2021, Bainite BM 95 L INTERMESHING rubber internal mixer / available immediately
Hfedsy E I Awopfx Af Tsp
Model: 95 L IM
Intensive mixing of various rubbers
Rotor type: HP-5 Type Design
Tank capacity: 95 liters
Dosing opening size: 860mm x 407.7mm
Dosage (Kg.): 95 x Sp. Gr. compound x filling factor
The filling factor is a function of the viscosity of the compound, the rotor speed and the pressure on the suspended weight. It is a value between 0.65 and 0.90.
A typical charge size for a rubber mixture is 95 x 1.15 x 0.65 = approx. 72 kg / charge. Motor power: 420KW, 1000RPM, 415V, 50 Hz AC Motor
Rotor speed: 6 to 60 rpm
Active cycle time: Continuous
Discharge door:
Hydraulically operated sluice door in the side of the chamber: Peripherally drilled
Floating weight: Hydraulic operation
The mixer: approx. 10t
The main motor: approx. 5t
The main gearbox: approx. 5t
The main control panel: approx. 1.5t
Trust Seal
Dealers certified through Machineseeker

Success:
Your message has been sent.
Listing
Ireland
18,791 km
Washing line for mixed plastic
Kowin, weima, rotajet
Call
Condition: excellent (used), functionality: fully functional, Good working condition washing line with Weima shredder WLK1500 and Rotajet dryer and 2 sink float tanks
Hjdpfoz Azz Esx Af Tjfp
Output capacity 750kg p/h
Success:
Your message has been sent.
Listing
OIching
18,503 km
Swivel bending machine
TrumpfTruBend Center 5030
Call
Condition: used, Year of construction: 2021, controller model: , _____
Description:
Year of manuf. : 2021
TruBend Center 5030
:- Robust machine frame
: - Angular direct drive
:- Crowning system
:- Machine control with touchscreen operation
:- TecZone Fold programming – floating licence
:- 2-axis part manipulator with suction modules
:- 5-axis backgauge
:- Optical angle assistant
:- ToolMaster
:- Hold-down tools
:- OBW90 and UBW90 bending tools
Technical specifications
Minimum bending depth (standard tool):145 mm
Minimum bending depth (with additional hold-down tool):40 mm
Hfjdpfez Sw Nisx Af Tsp
Maximum bending length:3,123 mm
Minimum bending length:80 mm
Hold-down force:101 t
Maximum box height:220 mm
Minimum material thickness:0.4 mm
Maximum steel material thickness:3 mm
Maximum stainless steel material thickness:2.2 mm
Maximum aluminium material thickness:4 mm
Rapid traverse Y-axis (press beam):250 mm/s
5-axis backgauge:1,700 mm/s
ToolMaster Bend:2,400 mm/s
Dimensions and weight:6,500 x 3,150 x 2,995 mm / 26,000 kg
Features
:- ACB Laser
:- DMC Bluetooth 2D barcode scanner
:- Set of 3-surface suction modules (12 pieces)
:- Support brackets (2 pieces)
:- Additional hold-down tool function (ENW)
:- Additional bending tool function (ZBW)
:- ENW110-50 – Length 3,123 mm
:- ZBW400 – Length 940 mm
Success:
Your message has been sent.
Listing
Berlin
18,131 km
Fire truck
MERCEDES-BENZSprinter 516 CDI RTW Fahrtec mit Trage
Call
Condition: used, mileage: 275,932 km, power: 120 kW (163.15 HP), first registration: 04/2010, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: automatic, emission class: euro5, number of seats: 2, total length: 6,450 mm, total width: 2,080 mm, total height: 2,900 mm, Year of construction: 2010, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment:
1 DIN slot in the front below the headliner, airbag on the passenger side, hill start assist, exhaust pipe in front of the rear axle on the left, exterior mirrors without integrated turn signal, exterior temperature display, battery 100 Ah, additional battery (reinforced), battery disconnect switch 1-pole, turn signals in the front, roof console with reading light for driver/passenger side, door entry lights, additional main key, folding cover for storage compartment, programmable special module, spare wheel Super-Single tire (235/65 R16), spare wheel holder under the end of the frame including jack, interior rearview mirror, rear wall with window, mud flaps in the front, seats in the cab: passenger seat comfort, seats in the cab: driver seat comfort, reinforced rear stabilizer bar, reinforced front stabilizer bar, fuel gauge for auxiliary heater, separation relay for additional battery, rear wall paneling, thermal insulation for the driver's cab, heat-reflective glazing (windshield with band filter at the top), auxiliary heater (air) electric
Additional equipment:
Adaptive brake light, airbag on the driver side, indicator for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both sides, brake assistant, braking system with ABS+ASR, roof lining in the cab, glove compartment lockable, body/superstructure: standard platform body, fuel tank: main tank 75 liters, headlight range adjustment, truck approval, engine 2.1 L - 120 kW CDI CAT, wheelbase 3665 mm, smoker's package, low emissions according to emission standard Euro 5, safety belt system with warning system (driver side), seat cover/upholstery: fabric Lima, service interval indicator Assyst, permissible total weight 5.00 t, dual tires on 2nd axle/rear axle
incl. stretcher and transfer chair from Stollenwerk, 1st owner
* Rear axle with air suspension
* Ambulance and rescue vehicle box body
* Superstructure by Fahrtec Systeme
* Adjustable floating table
* Stretcher by Stollenwerk
* Transfer chair by Stollenwerk
* Central locking for the patient compartment
* Air conditioning KONVEKTA
* 1 attendant seat
* Refrigerator
* Warming cabinet
* Sink
* Medical cabinets
* Oxygen and suction system pre-installed
* 12 + 230 Volt sockets
* Roof hatch
* External storage compartments
* Rear wing doors with step
* Side door with sliding window and step
* All-round work lights
* Partition with sliding window
* Ambient lighting left, right and rear
* 2x interior lighting, bright white and blue
* Cab with 2 seats
* 2x air conditioning, front and rear
* Automatic transmission
* Telma retarder
* Electric windows
* Electrically adjustable and heated mirrors
* Searchlight
* Daytime running lights
Hedpfx Afj Afrrwj Tofp
* Driver and passenger airbags
* ABS and ASR
* Rear axle with dual tires
* Extra pneumatically extendable step at the rear
* Superstructure dimensions: L=3,650 x W=1,900 x H=1,980 mm
* Wheelbase: 3,650 mm
* GVWR: 5,000 kg
* Unladen weight: 4,415 kg
Proper all-season tires from Conti, DOT 2023, with approximately 8.0mm tread depth in the front and approximately 6.5mm in the rear.
Engine, automatic transmission, and rear axle are dry.
The engine runs smoothly and the automatic transmission shifts cleanly.
Starter battery is new.
+++ Errors, changes, and prior sale are reserved.
Success:
Your message has been sent.
Listing
Stuttgart
18,614 km
Mower
EnergreenRobocut
Call
Condition: excellent (used), functionality: fully functional, power: 29.42 kW (40.00 HP), overall weight: 1,200 kg, fuel type: diesel, Year of construction: 2013, operating hours: 1,127 h, MC Connel Robocut / Energreen Robogreen
Radio-controlled mowing crawler / large-area mower / embankment mower
Technical information according to manufacturer:
- 40 HP 3-cylinder Isuzu diesel engine
- 2-stage hydrostatic drive (0–4 and 0–7 km/h)
- Emergency stop
- Slope capability up to 55 degrees
Hjdpfxew A Nn Ae Af Tefp
- Hydraulic output for mowing rotor (L/min): 50
- Working pressure (bar): 200–350
- Autec model control system
- Machine weight incl. attachment (kg): 1040
Attachment:
HEAD-130
- Flail mower rotor with 1.30 m working width including floating position, fitted with Y-blades
- Mowing rotor weight (kg): 160
- Flail rotor speed (rpm): 3000
This Energreen Robocut was manufactured in 2013 and, according to the meter, has 1,127 operating hours. It is in very good overall condition, showing the typical signs of use and wear for this class of machine. Recently serviced with major maintenance and extensive overhaul.
Sale as a used machine, excluding return, warranty, and guarantee.
Net price: €32,500 // Gross price: €38,675
- Viewing and test drive possible by arrangement
- Nationwide shipping can be organized; costs depend on distance
- Financing and leasing can be arranged individually
We make it easier for you to find: "floating dredgers"
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
Used Floating Dredgers (313)
Search Machineseeker now with more than 200,000 used machines:Browse through the most popular machine descriptions:
This may be of interest to you











































































































































































































































































































































































