Finger joint line with milling automate

GreCon 800 -5400 mm wood input lengths

Year of construction: 2009, operating hours: 214 h, condition: like new (used), functionality: fully functional, Thin-Cutting Frame Saw DSG Sonic – Wintersteiger Model / Type: DSG Sonic Year of Manufacture: 2009 Condition: EXCELLENT, only 214 operating hours Technical Specifications 🔹 Cutting and Block Parameters: - Feed speed: approx. 1.7 m/min - Saw frame stroke: 210 mm - Stroke frequency: approx. 550 strokes/min - Cutting heights depending on saw length: Pgjdpfx Asw Dp Ufoh Hsg - Saw length 380 mm: Cutting height 30–88 mm (with Air Jet and magazine), 45–88 mm (with double planer) - Saw length 420 mm: Cutting height 30–128 mm, 45–128 mm - Saw length 500 mm: Cutting height 80–210 mm, 45–210 mm - Saw length 550 mm: Cutting height 80–254 mm, 45–254 mm - Block lengths: - Basic machine: +185 mm - With magazine: 250–1700 mm - With double planer: +250 mm - Block height variation: ±0.5 mm - Cutting width with side fence: 140 mm 🔹 Additional Technical Data: - Cutting width with center fence: 2 × up to 60 mm - Optional channel width: 2–4 × 15–60 mm - Minimum lamella thickness (depending on wood type and cutting height): >1.5 mm - Kerf thickness (material loss): from 0.9 mm Blade lifespan (depending on wood): approx. 40 hours 🔩 Machine Weight: Basic unit: 3000 kg 🔉 Noise Levels (hearing protection required): At 1 m from the machine: - Idle: 97 dB(A) - Cutting: 99 dB(A) At the operator's workstation: - Idle: 85 dB(A) - Cutting: 88 dB(A) 🌬️ Extraction and Compressed Air Requirements: Dust extraction: Two connections: Ø 120 mm and Ø 150 mm Capacity: 3200 m³/h (30 m/s) Compressed air: - Minimum pressure: 6 bar - Consumption: 200 l/min Lubrication: Centralized system with guide monitoring ⚡ Electrical Data: - Power supply: L1, L2, L3 + PE - Power cable cross-section: up to 16 mm² - Control cable: 2 × 1.5 mm²

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 2024/121/47, saw blade diameter: 420 mm, GRAULE cross-cut and mitre saw Type ZS 170 N (tiltable) 400 Volt three-phase brake motor 2.2 kW Saw blade diameter 420 mm Saw blade holder 40 mm Cutting height 170 mm, Saw blade tilted to 45°: cutting height 115 mm, cutting length 410 mm incl. the following accessories: 1 pc. Machine can be tilted by hand crank from the rear on both sides from 90° to the left by 45° and to the right by approx. 30° to approx. 60° 1 pc. Carbide circular saw blade 420x3.4/2.4x30 mm 48 WZ neg. for wood Pedpjtwz Tlefx Ah Hegg 1 pc. Machine stand

Condition: used, Working width 1350 mm Number of sanding units 2 st. Workpiece thickness max. 160 mm sanding belt measurements 1370 x 2150 mm Feed motor 0,75 PS Pjdpfjrmucxjx Ah Hjgg

Condition: new, thread dia. M6 - M24 mm turning speeds 200 U/min radius 1200 mm angle adjustable from - to 0 - 90 Grad weight of the machine ca. 0,4 t dimensions of the machine ca. 1,4 x 0,1 x 0,7 m Electric tapping machine / 4450124SET Fast and precise thread cutting with freely positionable swivel arm - The machine head can be swiveled from 0 to 90 degrees - Quick change chuck with slip clutch for safe thread cutting without Risk of breakage - Right-left rotation can be selected on the machine head - Setting the parameters via touch display on the swivel arm - Both manual and automatic switching from forward to backward to reaching the entered Incl. 1 each GT24 M6, M8, M10, M12, M14, M16, M18, M20, M22-24 tapping chuck Substructure 900 x 600 x 875 mm Podpog N Nl Defx Ah Hjgg

Condition: new, with planing spindle Type R-R-RP1300 Working width 1300 mm Min. working length 538 mm Working thickness 3-110 mm Feeding speed 6-30 m/min Total motor power 77,12 kW Motor for first unit 22 kW Motor for second unit 30 kW Motor for third unit 18,5 kW Abrasive belt size 1330x2200 mm Pgedpfx Aed H Sc Ejh Hsg Working air pressure 0,55mpa Volume of dust collection device 12000 m3/h Transport dimensions 3090x2020x2260 mm Weight 4700 kg

Condition: good (used), Year of construction: 1998, Skid-mounted nailing machine P + K Pedpouzh Anjfx Ah Hogg Pallet nailing machine P+K SNM-III-24-1250 Intermediate drive with branding punch Positioning table Portal stacker Pallet size 600x800 - 1200x1400 mm

Condition: good (used), Drying oven for uv line Pjdet Ag Uqspfx Ah Hjgg

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, feed length Y-axis: 6,000 mm, Kippwanne für Baumstämme bis zu 6 m länge. Tipping tray for logs up to a length of 6m Pedpfjr Iig Dox Ah Hogg Verfügbar ab September 2024 Available from September 2024

Condition: good (used), Bandsaw line for big logs 1. Log conveyor 2. Buffering log deck and one piece feeder 3. Log conveyor and centering infeed with turner 4. Söderhamn AKE 245A Twin reducer bandsaw (ARI 6 knife heads) 5. Board separator with block turner 6. Side transfer of blocks 7. Block infeed 8. ARI BKR-600 9. ARI DS-75 multi rip saw 10. Edging line with ARI KT-52 Edger Pgsdpoikvlisfx Ah Hog Price: 2 100 000 SEK, in existing condition on site. Line is complete but not all conveyor in bottom floor. Bruks 1503M chipper. No power on electric cabinets (no PLC software) Can be dismantled and loaded by UJ Trading AB Sawmill is located in Sweden.

Condition: used, Year of construction: 2021, axis stroke (X,Y,Z) 4062, 2,922,660 mm Number of spindle head vertical 13 St. Number of spindles head horizontal 6 St. Number of tools 27 St. Number of milling agregates 1 St. working dimensions 3200,1500,200 mm Motor output 12 kW control BECKHOFF MASTERWOOD Project 385 (Winner) ----- Exhibition machine built in 2021, available immediately! 5-axis CNC machining center in portal design for use for Interior fittings, doors, stairs optionally expandable with solid wood clamps Frame processing and arched windows Short Summary: ----- Workspace: X = 3200mm ; Y = 1500mm; Z = 200mm 1 piece 5-axis high-performance spindle, 12 kW, with HSK 63 F mount 1 piece of permanently installed drill head with 19 spindles with 7 individually accessible vertical drilling spindles in the X direction with 6 individually accessible vertical drilling spindles in Y direction with 2 double horizontal drilling spindles in X direction and 1 double horizontal drilling spindle in Y direction Sawing unit integrated into the drill head 27 tool changing positions: Carousel tool changer with 22 positions and 102 mm grid spacing Linear 5-fold tool magazine for large tool diameters Original SCHMALZ tubeless work table. Console table with 6 traverses Workpiece lifting device Automatic tool length measuring device. Pack of 12 original Schmalz vacuum cleaners 114 x 140 mm height = 125 mm 1 piece Becker vacuum pump 100m3/h 1 piece chip conveyor belt Construction software Masterwork: 2D-Wop for standard application panel processing/interior construction, arches, doors Master 3D Level 2: for more complex processing, Optionally also expandable for 5-axis fully interpolating Prepared for the use of solid wood tensioners (round arches), Tensioner offered as an option if needed later Technology according to the enclosed, detailed description Podpsxmk Atefx Ah Hegg ----- Total price in this version from the Oberkochen warehouse: on request! ----- Freight and commissioning on request! Options for frame production/round arch with additional costs: ----- Reference ring for holding chip guide elements on 5-axis electrospindles with HSK 63F mounts: 410.00 euros Basic kit for clamping arch elements - 6 pneumatic tensioners with two movements for arch elements: 7,090.00 euros (technical information according to the manufacturer - no guarantee!) Chip guide elements, price per piece: 460.00 euros All prices mentioned are net, plus tax. (technical information according to the manufacturer - no guarantee!)