Used Fine Structure for sale (4,931)

Condition: used, Year of construction: 2005, edge thickness (max.): 3 mm, plate width: 3,000 mm, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Plate thickness: min. 10 mm Fgjdpfe Aihtdox Adwsi Plate thickness: max. 60 mm Plate width: max. 3,000 mm Edge thickness: min. 0.4 mm Edge thickness: max. 3 mm Number of magazine positions for edge rollers: 2 Feed rate: max. 40 m/min Distance between carriers: 500 mm Machining units Number of edge machining units: 8 End capping unit Number of motors: 2 Motor power: 0.35 kW Speed: 12,000 rpm Fine milling unit for flush milling and rounding Number of motors: 2 Motor power: 1.03 kW Speed: 12,000 rpm Edge rounding unit Number of motors: 4 Motor power: 0.35 kW Speed: 12,000 rpm Pre-milling unit 1 Number of motors: 1 Motor power: 5.5 kW Pre-milling unit 2 Number of motors: 1 Motor power: 5.5 kW EQUIPMENT Carrier chain Pressure system with rubber belt Preheating lamps for the plate side Edge roller magazine with 2 positions EVA hot melt adhesive tank EVA hot melt pre-melter Pressure roller unit End capping unit Fine milling unit for flush milling and rounding Edge rounding unit 2 pre-milling units Automatic, time-controlled activation of the second pre-milling unit Edge trimming unit Glue application unit Air heating unit with 2 motors PC WIN EDGE control system WIN EDGE programming software CE marking The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7818

Condition: new, empty load weight: 3,490 kg, maximum load weight: 8,110 kg, overall weight: 11,600 kg, axle configuration: 2 axles, loading space length: 5,700 mm, loading space width: 2,430 mm, suspension: steel, tire size: 355/60 R 18, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 355/60 R 18, rear tire size: 355/60 R 18, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-sided tipper, side walls 600 mm high, galvanized, + lattice extension 1,000 mm high, wide tires 355/60 R 18, loading height approx. 970 mm, central locking for side and rear walls, side walls pivoting and foldable, side walls with spring relief, floor made of fine-grained steel 4 mm, 12 x heavy-duty tie-down points recessed in the floor, tipping angle: 50 degrees rearward and 45 degrees sideways, continuously adjustable drawbar height, rear supports pluggable, geared support winch with load and fast gear, front, receiving shaft for two aluminum ramps integrated into the chassis, contour marking according to ECE R 048, surcharge for aluminum ramps, load capacity per pair 10 tons and 2 x folding supports, rear, ramps suitable for steel-tracked vehicles and rubber-tired vehicles, price: 1,900 euros, -- printing errors, errors and changes reserved, sample images --, more data at: !, More details: ! Fjdpfx Ao Aitu Hsdwogi

Condition: used, mileage: 110,000 km, power: 110 kW (149.56 HP), first registration: 06/2021, fuel type: diesel, overall weight: 2,800 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, Special equipment: On-board tools and jack, Driver assistance system: Park assist front and rear, Vehicle without child safety lock in the cargo/passenger compartment, Speed limiter, Illuminated glove compartment, Rear wing doors without glazing, High cargo area partition with fixed window, Truck registration, Emergency call system, Smoker's package, Spare wheel with road tires, "Transporter" lettering on the fender, Seats in the cab: Double passenger seat with storage compartment (lockable) in the seat base, Seats in the cab: Driver's seat with height adjustment, Seats in the cab: Lumbar support for driver's seat, Interior trim in the cargo/passenger compartment: Hard fiber, halfway up, Lashing eyes reinforced, Auxiliary heater Additional equipment: Passenger airbag can be deactivated, Airbag driver/passenger side, Anti-slip regulation (ASR), Exterior mirrors electrically adjustable and heated, Exterior mirror, convex, left, Exterior mirror, convex, right, Floor covering in the cab: Rubber, Driver assistance system: Multi-collision brake, Windshield laminated glass, Remote control key (2) foldable, Glove compartment lockable, Interior lights in the cargo/passenger compartment: LED, Interior filter: Pollen filter, Body/structure: Standard van, Body variant: Normal roof, Fuel tank: 70 liters, Radiator grille with chrome strips, Steering column (steering wheel) adjustable, Engine 2.0 liters - 110 kW TDI, Rear fog lamp, Radio reception digital (DAB+), Wheel covers, Wheelbase 3000 mm, Low emissions according to emissions standard Euro 6d-TEMP, Sliding door cargo/passenger compartment, right, Seat cover / upholstery: Fabric, Steel rims 6.5x16, Start/stop system, Warning system for seat belt (driver side), Heat protection glazing, Permissible total weight 2.80 t Fgedpfx Aezx H T Sodwji Subject to prior sale, errors and changes.

Condition: excellent (used), Year of construction: 2016, Linde Cryoline MT1250 Freezing tunnel Serial: 5-199 2016, Linde CRYOLINE MT 1250 Cryogen/Nitrogen Tunnel Freezer, a top-of-the-line freezing solution for your industrial needs. This machine boasts a cooling capacity of 100 kW/29.41 tons, ensuring efficient and rapid freezing of your products. The fully stainless steel construction, including a fine stainless steel mesh belt, guarantees durability and hygiene compliance. With a net belt width of 1250 mm and a freezing belt length of 4000 mm, this freezer can accommodate a wide range of products with a maximum height of 100 mm. Equipped with 6 internal high-speed fans that are adjustable, you have full control over the freezing process. The holding time can be set between 0.5 and 20 minutes, providing flexibility based on your specific requirements. The stainless steel switch-board cabinet features a Siemens PLC and HMI Simatic touchscreen for easy operation and monitoring. This Cryoline MT 1250 Cooling Tunnel, manufactured in 2016, operates on N2/Stikstof refrigerant and requires a voltage of 380-500V (50-60Hz). With an absorbed power of 5 kW, this machine is both powerful and energy-efficient. Don't miss out on this opportunity to enhance your production line with this reliable and high-performance freezer. Fsdpfet N Upcox Adwsgi

Condition: new, empty load weight: 3,280 kg, maximum load weight: 9,720 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, loading space height: 900 mm, loading space volume: 11 m³, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way tipper, with side wall extension 900 mm high, loading height approx. 940 mm, front wall - foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side drop sides swinging and foldable, side drop sides with spring relief, bridge floor made of fine-grained steel 4 mm, 8 x strong lashing eyes recessed in the floor, 5-stage hard chrome-plated three-sided tipping cylinder, tipping angle: 50 degree tipping angle to the rear and 45 degree tipping angle to the side, infinitely height-adjustable drawbar, stanchions pluggable at the rear, geared support winch with load and fast gear, front, mounting shaft for two aluminum ramps integrated in the chassis, lockable ramp shaft (privacy screen), contour marking according to ECE R 048 regulation, , Rental price from 550 ¤, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Fgedpfxo Aidiuj Adwji

Condition: new, empty load weight: 2,980 kg, maximum load weight: 8,920 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, tire size: 245 / 70 R 17,5, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side walls swinging and foldable, side drop sides with spring assistance, platform floor made of 4 mm fine-grain steel, 8 strong lashing eyes recessed into the floor, 5-stage hard-chromed three-way tipping cylinder, tipping angle: 50 degrees to the rear and 45 degrees to the sides, continuously height-adjustable draw tube, removable rear stakes, gearbox support winch with load and high-speed mode at front, integrated receiver compartment for two aluminum loading ramps in chassis, lockable ramp compartment (privacy protection), contour marking according to ECE R 048 regulation, vehicle with day registration, -- Subject to misprints, errors and changes, sample images --, More data at: !, More details: ! Fgedpfx Ae Aidi Hodwei

Condition: used, functionality: fully functional, Single-deck pre-screening machine Screening area: approx. 1,250 x 2,000 mm Driven by two 4 kW unbalanced motors Mounted on a steel structure with discharge chute Fjdpfxjwm Ndxj Adwjgi

Condition: good (used), functionality: fully functional, OM - Impact crusher plant on steel structure Inlet: approx. 1,000 x 565 mm, electric motor 110 kW SCHENCK vibrating feeder Discharge box and discharge chute Fsdpfx Asxcmizsdwjgi

Condition: used, Year of construction: 2013, operating hours: 4,867 h, functionality: fully functional, Equipment: Basic model DW 3060-C “Büffel” Central axle trailer chassis with 3 axles, road approval for 80 km/h Braking system incl. ABS and lighting according to EC directive 50 mm EC drawbar coupling incl. adapter shoe Hydraulically adjustable support legs Splash guard (fenders inside and on the side) Permissible total weight 25,000 kg Tires 385/65 R22.5 Mercedes-Benz diesel engine OM460LA, 315 kW at 2,000 rpm, meets exhaust emission standard EUROMOT IIIB Additional hydraulic connections 20 l and 70 l/min. (using a variable pump) Hydraulic preparation for comb basket system and drive mechanism Fuel tank 2 x 300 liters Roller length 3,000 mm, diameter 600 mm Fedpfszn Icyox Adwsgi Trapezoidal teeth for roller (21 pieces) and comb (22 pieces) - form C (174 mm, armored) Rear belt: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic center section Longitudinal belt: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24-V electrical control system Reversal of the roller by means of an electric motor when the engine is stopped Automatically reversible fan wheel Chassis with level adjustment Acoustic start-up warning Paint finish: 2-component paint RAL2011 deep orange Additional equipment: BioPower package - Engine output: 360 kW, with reinforced planetary gearbox - Multi-tooth roller, length: 3,000 mm, diameter: 600 mm - Roller teeth 174 form C armored (42 pieces) - Comb basket system with fine strip basket - Transmission oil cooler Hydraulic drive mechanism Radio remote control NEODYM over-belt magnet for rear belt Frame for over-belt magnet Humidification system Funnel attachment plates foldable on both sides Delivery date will be agreed upon.

Year of construction: 2026, condition: new, Our KVK 1A is the almost identical sister model to the KVK 2 (MA), i.e. a semi-automatic stretch wrapper with turntable which, in comparison to the KVK 2 MA, is equipped with a cut-out for ground-level access with a hand pallet truck. The only thing that still has to be done manually with this wrapper is feeding and cutting the film. With a weight of 700 kg, this model is also designed for professional use and can be loaded up to 1500 kg. Fsds Ah E Hlopfx Adwegi The 1A has a turntable of 1500 mm and can wrap pallets up to 2400 mm high as standard. With adjustable speeds of the turntable and film carriage, as well as an electromagnetic brake that can be very finely adjusted via potentiometer, you can adapt the automated wrapping process perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. If required, the winder can also be controlled manually. If the winder needs to be used at a different location in between, it can be easily lifted and moved with a forklift using the integrated cut-outs. In addition to a photocell for detecting dark packages or black film, the wrapping height of the KVK 1A can be varied as an option (up to 3200 mm). Recommendation The KVK 1A is ideal if no ramp can be used for space reasons or if particularly heavy or unstable packaged goods are not to be pushed onto the turntable via a ramp. For further information, we have attached the technical data sheet as a PDF to this advertisement!

Year of construction: 2026, condition: new, Our KVK 1A is the almost identical sister model to the KVK 2 (MA), i.e. a semi-automatic stretch wrapper with turntable which, in comparison to the KVK 2 MA, is equipped with a cut-out for ground-level access with a hand pallet truck. The only thing that still has to be done manually with this wrapper is feeding and cutting the film. With a weight of 700 kg, this model is also designed for professional use and can be loaded up to 1500 kg. The 1A has a turntable of 1500 mm and can wrap pallets up to 2400 mm high as standard. With adjustable speeds of the turntable and film carriage, as well as an electromagnetic brake that can be very finely adjusted via potentiometer, you can adapt the automated wrapping process perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. If required, the winder can also be controlled manually. If the winder needs to be used at a different location in between, it can be easily lifted and moved with a forklift using the integrated cut-outs. Fgedpe Ah E H Nofx Adwei In addition to a photocell for detecting dark packages or black film, the wrapping height of the KVK 1A can be varied as an option (up to 3200 mm). Recommendation The KVK 1A is ideal if no ramp can be used for space reasons or if particularly heavy or unstable packaged goods are not to be pushed onto the turntable via a ramp. For further information, we have attached the technical data sheet as a PDF to this advertisement!

Condition: used, Electric chain hoist, electric lifting mechanism, STAHL crane, type T510M No.: 1510173 Year of manufacture: 1989 Load capacity: 1000 kg Hook travel = lifting height: 5.5 meters Lifting speed: 10 m/min Fine lifting speed: 1.7 m/min Load strands: 1 Control pendant cable length: 4.3 m Rated power: 2 kW / 0.24 kW Rated current: 8 A / 5.6 A Mains connection: 380 volts, 50 Hz Fedpfx Ae Ah Igrodwogi - Suspension hook on the top of the crane Weight: 75 kg Good condition

Condition: used, Sweeper, sweep-and-vacuum machine HAKO, type Hamster 800 E Manufacturer's No. 6213435441, year of manufacture approx. 1990 Sweeping width without side brushes: 600 mm Sweeping width with side brushes: 800 mm Dirt container volume: approx. 50 liters Fodpfxj Ah Ig Is Adwsgi - 24-volt electric drive for driving and sweeping - self-propelled, forward and reverse, via wheel drive - 2 NEW drive batteries, year of manufacture 2026, type 12-volt, 70 Ah - integrated automatic charger, 24-volt, 8 Ah - 1 side brush - dirt collection container for the swept material - dust extraction with cassette filter Space requirement (L x W x H): 1600 x 950 x 1000 mm Weight: approx. 180 kg Good condition The sweeping roller rotates against the direction of travel and throws the swept material directly into the dirt collection container. The dirt collection container can be easily removed. A fine dust filter with extraction fan and shaking device ensures dust-free sweeping.

Condition: used, Electric chain hoist, electric lifting mechanism, DEMAG crane, type PK2N-F Serial No.: 5785034 Year of manufacture: 1988 Load capacity: 500 kg Fodpfx Adj Ah Iiuowsgi Hook travel: 5 meters Main lifting speed: 5 m/min Fine lifting speed: 1.25 m/min Control pendant cable length: approx. 3.5 meters Power supply: 400 volts, 50 Hz - 2 load chains = 500 kg - Electric travel unit DEMAG, type 13/3 PF8 with 1 travel speed of approx. 8 m/min. Type 13/3PF 8 - For double T-beams with approx. 100 to 200 mm width Weight: 63 kg In good condition

Condition: used, Electric chain hoist, electric lifting mechanism, crane STEEL type Si T 201-10/2.5 No.: 1202373, Year of manufacture: 1989 Load capacity: 250 kg Hook travel = lifting height: 3.5 meters Lifting speed: 10 m/min. Fine lifting speed: 2.5 m/min. 2 load chains = 250 kg Cable length for control pendant: approx. 1.4 meters Power connection: 400 volts, 50 Hz. - Suspension eye on the top of the crane Weight: 22 kg Good condition Fgedj Ah Ii Aepfx Adwei

Condition: used, Chain hoist, LIFTKETT Type B 1:3 Load capacity: 125 kg Hook travel: 3 meters Lifting speed: 6 m/min Fine lifting speed: 1.5 m/min 1 load strand Mains connection: 380 volts, 50 Hz Good condition Fodpfo Ah Ii Hox Adwegi

Condition: used, Electric chain hoist, electric lifting mechanism, STAHL crane, Type R 12 Serial No. 3437532, Year of manufacture 1979 Fede Ah Ii Uspfx Adwsgi Load capacity: 1250 kg Hook travel: 2.4 meters Lifting speed with one load chain: 8 m/min. Fine lifting speed with one load chain: 2 m/min. Lifting speed with two load chains: 4 m/min. Fine lifting speed with two load chains: 1 m/min. 2 load chains = 1250 kg Motor power: 1.25 / 0.25 kW Power connection 380 volts, 50 Hz - without chain bag - trolley for KBK 2 - twin-girder crane bridge, bridge crane Trolley without the 4 KBK rollers in good condition

Condition: used, Electric chain hoist, electric lifting mechanism, MAN GHH crane, type SKA 83.12 Fgjdpfs Ah Iiiox Adwsi Year of manufacture: approximately 1997 Load capacity: 125 kg Hook travel: 8.2 meters Main lifting speed: 8 meters/min Fine lifting speed: 2 meters/min 1 load chain Mains connection: 380 Volts, 50 Hz

Condition: used, functionality: fully functional, Screen area: 1,250 x 3,000 mm Semi-mobile steel structure with platform and discharge chute Transverse discharge conveyor belt, 650 mm x 2.2 m Fgodpe Ah Hmyofx Adwsi (optionally available without conveyor belt)

Condition: used, Year of construction: 2016, Coolant cleaning system Manufacturer: Zyklomat Type: ZKR 14/350 Year of manufacture: 2016 For cleaning grinding emulsions Supply rate: max. approximately 250 L/min at approximately 3.5 bar water pressure Overflow to the filter system is provided on-site, air and foam-free. Maximum temperature: 50°C Cleaning capacity: 350 L/min Recirculation from the clean tank to the dirty tank: 100-350 L/min Machine supply: max. 250 L/min Filtration principle: ZYKLOMAT high-performance hydrocyclone Z1B-9/3 Particle separation limit: approximately 5 µm Medium: Emulsion 3-6% Operating temperature: Ambient temperature Solid particle volume: approximately 5.14 m3 Fodpfx Adjzwccmswsgi Maximum operating volume: approximately 4.58 m3 Minimum operating volume: approximately 3.60 m3 Process sequence: Fully automatic full-flow filtration Sludge discharge: Fully automatic, with consistent consistency The dirty liquid is fed via on-site pumping stations. The chips and fine sludge generated during grinding (grinding swarf, scale, corundum) are discharged via a scraper conveyor. The sludge is pre-dried in the upper scraper section. Filtration takes place via ZYKLOMAT high-performance hydrocyclones. The system operates fully automatically. Maintenance: annual maintenance Availability: 10-2026 Double scraper tank for discharging grinding sludge Type: KR 1.75-5.1 Total volume: approximately 5.14 m3 Maximum volume: approximately 4.58 m3 Length: approximately 4,000 mm, including 70 mm stiffening Width: approximately 1,890 mm, including 140 mm stiffening Height: approximately 1,105 mm, including 100 mm bottom profile Neck height: approximately 2,300 mm Theoretical maximum discharge volume: 15 kg/h Function: Coolant storage tank with integrated clean tank, sedimentation and flotation tank with fully automatic sludge discharge. 1 bevel gear motor Voltage 400 V, 50 Hz, IP 54 as scraper drive 3 connection nozzles for return lines from three machines 1 clean liquid tank, integrated at the rear into the scraper tank Oil-tight welded, with internal circumferential bevel gear, various cover plates (non-walkable plates screwed onto angle frame), without ladder, without railing, without internal access rungs Maximum volume: approximately 0.55 m3 41126ä

Condition: excellent (used), Year of construction: 2002, High-quality copy lathe, wood lathe with milling unit, PLC-controlled. A video of the machine in operation can be sent upon request. PLC-controlled wood copy lathe for turning and milling. The machine has two controlled axes: the longitudinal axis and the rotary axis. Input of various feed rates and corresponding lengths for turning, as well as additional divisions and pitches for milling. Fedpfx Aozfwm Nodwegi Several programs can be stored for turning and milling operations. Hydraulic copy sensing of a pattern or template. The roughing and copy tools are equipped with fine adjustments. Template adjustment can be made from the front and rear via fine-threaded spindles. The copy length can be divided into up to 6 sections with different feed rates for turning highly contoured workpieces. Drive motor 400V / 3kW with electric motor brake. Two speed stages adjustable via V-belt, within the stages, operation can be continuously adjusted via a frequency inverter. Speed stage 1: 200 - 2000 RPM Speed stage 2: 350 - 3400 RPM Distance between centers approx. 1550mm Copy length with steady rest approx. 1350mm Bed length approx. 2100mm Feed rate continuously adjustable, rapid traverse with safety end stop. Hydraulic copy slide with V-turning tool. Spindle with M33 thread and MK3 internal taper. Tailstock MK3 and with quick-release device. Numerous accessories: Ring steady rest with front turning tool and insert aid. Four-jaw steady rest. Four-jaw chuck 125mm. Copy tools, center punches, hexagonal drivers, etc. Milling unit with 3kW motor for mounting on the copy slide. 5 milling heads available, only the 16mm collet is missing. CE marking Operating manual V-belt new Original paint, only a few spots retouched. Very good condition from a small carpentry shop. The machine apparently was not used to produce large quantities. Dimensions approx. 2600 x 1300 x 1300mm (L x W x H). Weight approx. 800kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this supplier".

Condition: excellent (used), Metal structure Fsdpe Aicv Tefx Adwjgi

Condition: used, functionality: fully functional, Machine data • Gantry-type machine with stationary table and moving bridge for minimal footprint • Base, bridge, and bridge columns made of steel, welded in one piece, stress-relieved and machined • Main structural components consist of ribbed welded assemblies, optimized for the best possible rigidity-to-weight ratio, vibration damping, and high acceleration • Every machine design is verified and optimized using finite element analysis (FEA) to ensure maximum quality, performance, and safety • Easily accessible machine table enables simple loading and unloading with a forklift or overhead crane • Precision ground linear guides with high preload and additional cover strip on all axes for optimal chip protection • Brushless digital A/C servo motors and controllers on all axes • Single-sided (centered) drive on the X-axis (gantry drive) • Rack and pinion drive on X and Y axes • Precision ball screw spindle with double bearing support on Z-axis • Precision planetary gearboxes with minimal backlash • Fully enclosed cable drag chains to protect cables from chips and dust • High-quality shielded cable drag chain wiring for maximum reliability against interference and downtime • X-axis machining area: 1,540 mm • Y-axis machining area: 1,540 mm • Z-axis clearance: 150 mm • Z-axis travel: 240 mm • Network connection via Ethernet • Remote maintenance via Internet FlexiCAM control system • DIN-ISO 66025 G-code compatible • Includes TCP/IP network interface • 256 MB RAM Fgedpfx Adeybb N Iewoi • Simple operation via handheld control unit with display Spindle with manual tool change • Power consumption: 5.6 kW • 5,000 to 24,000 RPM, infinitely programmable • Cooling via integrated electric blower Dust extraction for manual tool change • Hose connection diameter: 120 mm Work table • T-slot profiles Safety features • CE compliant according to DIN EN 13849 • Includes EMC filter, Emergency Stop • Light curtain system controlled by the machine controller

Condition: used, Year of construction: 2012, GENERAL FEATURES: CNC machining center with a fixed machine table and a moving tool carrier in a portal design for drilling and milling operations on panels made of various materials (chipboard, MDF, solid wood, plastic, etc.). MACHINE STRUCTURE: The base structure is a monolithic design made of thick-walled material, reinforced by welded-in parts across the entire machine bed, making it extremely stable. The table design, with a large base, ensures long-lasting precision and stability. The machine layout allows the user an optimal workflow despite a minimum of space. The mobile portal carrier is made from a solid monoblock. It is positioned in the X-direction on prismatic, ground guides using ball screw slides. On this mobile tool carrier, the working unit is in turn attached to prismatic, ground guides and the ball screw slide. Axis movement is achieved using "brushless" motors in the X/Y/Z axes. The drive system operates in the X-axis via a pre-tensioned precision rack and pinion drive, and in the Y/Z axes via ground ball screws of the highest precision class. AXIS MOVEMENT: The movement of all axes takes place on prism linear guides with a large cross-section and ball screw shoes with a large contact surface, which ensure optimal sliding even at the highest speeds and accelerations. The precise and rapid positioning of the moving portal (X-axis) is achieved by a pinion and rack with helical teeth. Ball screws with a large cross-section ensure the accurate positioning of the working unit along the moving portal (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. STANDARD MACHINE DESIGN: Milling spindle with 5-axis positioning, 11kW (15HP), HSK63, 1200-20000 RPM. The machining unit consists of a powerful 11 kW (15 HP) motor, which is liquid-cooled and capable of 5-axis positioning. This feature enables machining operations to be performed with a tool that can be oriented in any direction; therefore, fewer angular movements are required. The base structure of the milling unit is based on a design with two non-orthogonal axes that intersect next to the tool. This feature guarantees a robust carrier for heavy-duty milling applications. Thanks to the non-orthogonal axes, it is possible to perform numerous repositionings without using too much space. This allows the machining of complex geometries without the risk of collision with the workpiece and achieves an angle of -10° in relation to the machine table. All machining operations are facilitated by the small dimensions of the group in relation to the rotation axis of the spindle: when the group is in a horizontal position, the dimension is only 35mm. WORK TABLE TV: The work table is designed to guarantee the operator maximum "freedom of movement." The vacuum quick-change clamping system provides maximum flexibility with precise positioning and optimal work piece holding. The table consists of moving consoles that are adjusted in the X-axis on ground guides with ball screw shoes and a special profile to ensure Fsdozrvvvopfx Adwogi

Condition: excellent (used), Year of construction: 1999, Double-sided, multi-purpose edge-grinding machine with oscillation and 200mm grinding height. Langzauner LZK 4-S with a veneer edge-grinding side and a solid wood grinding side. 200mm grinding width Motorized belt oscillation, therefore no compressed air connection is required. Drive motor 400V / 3kW Front work table for grinding veneer edges, grooved with a stop guide (for veneer overhang). Veneer grinding attachment with fine adjustment, foldable. Spring-loaded table, height-adjustable and can be moved to the side. Angle stop. Rear, adjustable work table for grinding solid wood. Both tables are height-adjustable to make full use of the grinding belt. Belt dimensions 3000 x 200mm. Side extension table for radius grinding on the 150mm belt roller. Feed stand holder 68mm. Central dust extraction connection 140mm. Very stable frame with 2 swivel casters, 2 steering casters, and a lever brake for locking. Fedez I T Apopfx Adwogi CE marking. All graphite pads and suction hoses have been renewed. Original paint, with only minor touch-ups in places. Excellent condition from a small restoration workshop. Some grinding belts are included. Dimensions approximately 1800 x 1000 x 1250mm (L x W x H). Weight approximately 650kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in stock, see "other offers from this provider".