Used Scherer Fine Structure for sale (30)

Condition: good (used), functionality: fully functional, Center height 110 mm Center width 160 mm Spindle bore 23 mm Dlsdsx Dq Dfjpfx Ab Tea 3 speeds for clockwise rotation and 3 speeds for anti-clockwise rotation

Condition: used, Year of construction: 2002, - Siemens 840D Sinumerik control system - Driven tools - 12 tool positions - Drag frame magazine 20 places - chip conveyor - Coolant system - Year of construction 2002 Technical data: Dodpfx Ajrbltpob Tela - Rotation Ø: 235 mm - Z-axis (vertical): 250 mm - X-axis (horizontal): 450 mm + 370 mm - Workpiece height: 100 mm - Ø in front bearing: 90 mm - Spindle head with short taper DIN 55026: A5 - Hollow shaft motor with oil circulation cooling: integrated in the headstock - Nominal power 100% ED: 29.3 kW - Nominal torque 100% ED: 200 Nm - Nominal speed: 1400 rpm - Maximum speed: 6500 rpm - Z-axis travel speed: max. 30 m/min - Traversing speed X-axis: max. 60 m/min Tool changer: - Number of switching positions: 16 - Permissible tangential torque (turret locked): 1300 Nm - Permissible mass moment of inertia of tool disk, tool holders and tools: 2.5 kgm² - Permissible unbalance (load torque) due to equipping with tool holders and tools: 32 Nm - Hydraulic operating pressure: 50 bar ± 10% - Weight of the turret: approx. 50 kg Dimensions - Dimensions WxHxD: 4400 x 2800 x 2600 mm - Machine weight: approx. 7000 kg

Condition: good (used), Year of construction: 2010, Ref. -No.: 10436 Manufacturer: SCHERER FEINBAU Type: VDZ 120 rechts Year of construction: 2010 Type of control: CNC Control: SIEMENS SINUMERIK 840 Storage location: Halberstadt Country of origin: Germany Machine-No.: 660XX Turning Speeds: 5500 RPM Swing Diameter: 260 mm Rapid Travel Speed X-Axis: 60 m / min Rapid Travel Speed Z-Axis: 30 m / min Travel -X Axis: 626 mm Travel -Z Axis: 250 mm Spindle bearing diameter: 32 mm Rated speed: 1200 1 / min Turret places: 12 Pcs Machine length: 1685 mm Machine width: 2400 mm Machine Height: 2850 mm Weight Of The Machine Ca.: 8 t Further information: Spindle head with short taper DIN 55026: A6 Pallet conveyor WPS KNOLL system (2010) SAUTER turret (12 places) Documentation available Tools in the pictures are sold with the machine. Dlsdoxvw Hkopfx Ab Toa Machine can be inspected and demonstrated under power.

Condition: repair required (used), Year of construction: 2014, functionality: not functional, machine/vehicle number: 67137, Technical characteristics: Work Area - Maximum clamping plate diameter: 250 mm - Maximum turning diameter: 250 mm - Maximum machining diameter: 220 mm - Maximum workpiece length: 200 mm - X-axis travel: 886 mm / Rapid traverse X: 60 m/min - Z-axis travel: 250 mm / Rapid traverse Z: 30 m/min - Y-axis travel: -85/+100 mm / Rapid traverse Y: 30 m/min - Standard closed automation (number of loading stations by workpiece diameter): 14/(80...200), 18/(30...160), 30/(30...85) Main Spindle - Spindle (Weiss) per DIN 55026: Size A6 - Maximum speed: 5,500 rpm - Power at 100% duty cycle: 38 kW - Torque at 100% duty cycle: 300 Nm Secondary Spindle HSK63 - Spindle head size/type: HSK-A63 - Nominal speed: 2,700 rpm / Nominal power: 12 kW / Nominal torque: 42.4 Nm - Maximum speed: 15,000 rpm - Power at 100% duty cycle: 38 kW - Torque at 100% duty cycle: 300 Nm Tool Holder with Motorized Tools - Turret VDI40, Siemens-drive 0.5.440.220 (manufacturer: Sauter) - Number of stations: 12 - Live tool nominal speed: 3,000 rpm / Nominal torque: 33.1 Nm - Live tool maximum speed: 10,000 rpm / Nominal torque: 56.2 Nm - Live tool nominal power at 100% duty cycle: 10.4 kW Electrical Equipment - Operating voltage: 400 V, fused 100A GL - Connected load: 45 kW Dimensions - Overall dimensions: Length = 4,021 mm, Width = 4,709 mm, Height = 3,527 mm - Weight: 8,000 kg Main Features and Capabilities: - Vertical design for optimal chip evacuation and easy loading/unloading - Control system: Siemens 840D SL - High precision with Heidenhain linear scales for X, Y, Z axes - High-power main spindle (Weiss) with a wide speed range - High-power secondary spindle (Weiss), easily accessible for drilling/milling operations - Automated loading/unloading via integrated automation - In-process control probe: Marposs T25 - Live tooling for extended machining capabilities (drilling, milling, etc.) Dledpfx Abjxxi Urs Toa - Chip conveyor: Knoll - Coolant 'paper' filter unit & chiller: Knoll KF150/500 - Electrostatic mist filter: IFS type IFM1000 Machine status: NOT WORKING - Sauter turret replaced with new unit; assembly not complete – turret motor spindle installation still required - Operator panel safety switch needs replacement

Year of construction: 2001, condition: ready for operation (used), Two identical CNC lathes Scherer Feinbau are available. Swing diameter: 200mm, travel path X/Z: 240mm/280mm+515mm, max. workpiece height: 100mm, spindle nose taper: A4, spindle power: 7.6kW, spindle torque: 60Nm, speed: 8000rpm, travel speed X/Z: 60m/30m/min. Weight: approx. 5500kg, control: Siemens Sinumerik. Documentation vorhanden. An on site inspection is possible. Dedpexwywhefx Ab Tela

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, Connection: 3.55 kW / 230 V / 50 Hz External dimensions (WxDxH): 945 x 830 x 1025 mm External dimensions (WxDxH, open): 945 x 830 x 1640 mm Weight: 60 kg Basket diameter: 600 mm Useful height: 380 mm Pump pressure: 2.2 bar Spray volume: 4,200 l/h Load capacity: 100 kg The soiled item to be cleaned is placed in the rotating wash basket and the lid is closed. After setting the desired washing temperature and time, the unit is switched on and the cleaning solution in the tank is heated. Inside the closed machine, the basket rotates at a constant speed around its own axis. The pump system draws the cleaning solution from the wash tank and feeds it through 6 stainless steel spray pipes equipped with overlapping flat jet nozzles. The item is thoroughly sprayed from all sides with hot solution during even rotation of the basket, which is driven by the jet action. After the cleaning cycle is complete, the unit shuts off automatically. Advantages: - 1 horizontally mounted pump - Flow rate: 70 L/min - 3 three-dimensional stainless steel spray pipes - Robust stainless steel construction - Additional small parts cleaning basket made of stainless steel (Ø 170 mm) - Rotating stainless steel wash basket driven by water jet - Steam extraction - Stainless steel perforated plate with filter inlets above the wash tank Dlsdpfx Aoxiwc Ssb Tea - Water shortage safety device

Condition: good (used), Year of construction: 1982, functionality: fully functional, Precision high-speed lathe make FEINBAU Machine No. 4891 Type PM1-FZB Year of manufacture 1982 Technical data : . Maximum turning length 90 mm Swing diameter over bed 220 mm Swing diameter over support 110 mm Center distance 160 mm Bore 23 mm Drive motor 0.65 / 1 / 1.3 kW Space requirement , length x width 1.6 x 0.8 x 1.2 m Scope of delivery : Collet chuck device for collets : K23 DIN 6341 Collets Hand lever cross support with adjustable stops Hand lever boring vise, with 2 x MK1 holders and stops . .. Ongoing purchase of used German machines without NC or CNC control Dlsdpfxexxbm Tj Ab Tea .

Condition: good (used), Year of construction: 2008, For sale is 1 Scherer VDZ 80 DS with the following technical data: Rotation diameter: 120 mm z-axis (vertical): 265 mm x-axis (horizontal): 280 mm Diameter in the front bearing: 85 mm Diameter in rear bearing: 75 mm 2 x A4 spindle Dledpfxjxr A Dtj Ab Tja Spindle unit drive Rated power: 16.8 kW Nominal torque: 100 Nm Speed: 1000 - 7000 rpm Traversing speed z-axis: max. 30 m/min Traversing speed x-axis: max. 30 m/min Dimensions: 2.44 x 2.3 x 1.42 m (L x H x W) Weight: 9000 kg Complete documentation available. Attention! The system will probably have to be reprogrammed somewhat, as it was part of a complete line. However, a single program is available.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 10436, travel distance X-axis: 626 mm, travel distance Z-axis: 250 mm, spindle speed (max.): 5,500 rpm, workpiece diameter (max.): 260 mm, controller model: SIEMENS SINUMERIK 840, Equipment: documentation/manual, Tools shown in the pictures are included in the sale. TECHNICAL DETAILS Control: SIEMENS SINUMERIK 840 Speed: 5,500 rpm Swing diameter: 260 mm Travel path - X: 626 mm Travel path - Z: 250 mm Spindle bearing diameter: 32 mm Rated speed: 1,200 rpm Rapid traverse speed X-axis: 60 m/min Djdpfoxnz Suox Ab Tjla Rapid traverse speed Z-axis: 30 m/min Turret stations: 12 positions MACHINE DETAILS Machine length: 1,685 mm Machine width: 2,400 mm Machine height: 2,850 mm Machine weight: 8 t EQUIPMENT - Spindle head with short taper DIN 55026: A6 - WPS pallet conveyor - KNOLL system (2010) - SAUTER turret (12 positions) - Documentation available

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 46001, Technical characteristics: Dedpfx Asxw Ufysb Tela Work Area - Maximum clamping plate diameter: 220 mm - Maximum turning diameter: 170 mm - Maximum machining diameter: 170 mm - Maximum workpiece length: 100 mm - X-axis travel: 495 mm / X-axis rapid traverse: 48 m/min - Z-axis travel: 250 mm / Z-axis rapid traverse: 30 m/min - Standard enclosed automation (number of loading positions by workpiece diameter: 14/(80...200), 18/(30...160), 30/(30...85)) Main Spindle - Spindle (DIN 55026): Size A5 - Maximum speed: 7000 rpm - Power at 100% duty cycle: 23 kW - Torque at 100% duty cycle: 130 Nm Tool Turret with Driven Tools - Turret VDI40, Siemens drive 0.5.435.220, Manufacturer: Sauter - Number of stations: 12 - Maximum speed: 4000 rpm Electrical Equipment - Supply voltage: 400 V, 80A GL fuse protection - Connected load: 41 kW Dimensions - Total dimensions (L×W×H): 3913 × 2160 × 2955 mm - Weight: 6500 kg Main Features and Capabilities: - Vertical design: Optimal chip evacuation and easy loading/unloading - Control system: Siemens 840D SL - High precision: X and Z axis position accuracy via Heidenhain linear scales - Main spindle by Weiss: High power and broad speed range - Automated loading/unloading: Parts are loaded and unloaded via integrated automation - In-process control probe: Marposs T25 - Driven tools: Enables drilling and milling operations - Chip conveyor: Knoll - Coolant “paper” filtration & chiller unit: Knoll KF150/950 - Fire suppression system: Kraft&Bauer - Electrostatic mist collector: IF Vario EC1500 Machine status: - Working

Condition: excellent (used), Year of construction: 2013, Control: SIEMENS Sinumerik 840D sl Dlodpsw Hx Akofx Ab Tja Working Area Max. workpiece height: 200 mm Max. workpiece diameter: 250 mm Max. turning diameter: 390 mm Max. distance spindle stop – turret: 580 mm Min. distance spindle stop – turret: 240 mm Spindles Max. spindle speed: 5,500 rpm Spindle power per spindle: 37.7 kW Max. spindle torque per spindle: 300 Nm Spindle nose with short taper (DIN 55026): A6 Axis Travel X-axis travel (in working area with cover closed): 365 mm Total X-axis travel: 886 mm X-axis travel (over turret center): -20 mm Y-axis travel: +100/-80 mm Z-axis travel: 250 mm 12-position disk turret VDI 40

Condition: good (used), Year of construction: 2006, machine/vehicle number: 66078, TECHNICAL DETAILS Control: SIEMENS SINUMERIK 840 Speed: 5,500 rpm Swing diameter: 260 mm X-axis travel: 626 mm Z-axis travel: 250 mm Spindle bearing diameter: 32 mm Nominal speed: 1,200 rpm X-axis rapid traverse speed: 60 m/min Z-axis rapid traverse speed: 30 m/min Turret positions: 12 MACHINE DETAILS Machine length: 1,685 mm Machine width: 2,400 mm Dlsdpfxewfddde Ab Tea Machine height: 2,850 mm Machine weight: 8 t EQUIPMENT - Spindle head with short taper DIN 55026: A6 - WPS pallet conveyor - KNOLL system (2010) - SAUTER turret (12 places) - Documentation available

Condition: good (used), functionality: fully functional, Technical data: Centre height 110 mm Centre width 160 mm Spindle bore 23 mm Motor power 1.7 kW Speed can be set via potentiometer from approx. 100 - 2,300 rpm 3 pre-selected speeds or 3 switching levels . Scope of delivery, machine with: Operating modes: Manual + automatic Pneumatic clamping device Tilt tailstock with 2 sleeves for K 12 collets, with control switch for switching Hand lever cross support with 4 stops, consisting of cross and longitudinal support . Dlsdpfxexvtino Ab Toa

Condition: good (used), Year of construction: 2004, For sale are 2 pieces of shearer VDZ 80 DS with the following technical data: Rotation diameter: 120 mm z-axis (vertical): 265 mm x-axis (horizontal): 280 mm Diameter in front bearing: 85 mm Diameter in rear bearing: 75 mm 2 x A4 spindle Spindle unit drive Rated power: 16.8 kW Nominal torque: 100 Nm Speed: 1000 - 7000 rpm Traversing speed z-axis: max. 30 m/min Traversing speed x-axis: max. 30 m/min Dimensions: 2.44 x 2.3 x 1.42 m (L x H x W) Weight: 9000 kg Complete documentation available. Dlodpfx Ajxr A Dgeb Tsa Attention! The system will probably have to be reprogrammed somewhat, as it was part of a complete line. However, a single program is available.

Year of construction: 1981, condition: not inspected (used), Feinbau Precision lathe S1-So/KA 40 -WKG 986- Offered here is a fully automatic precision lathe from Feinbau. Technical data: Manufacturer: Feinbau Type: S1- So/KA 40 Dodpfohg Nm Rjx Ab Tsla Year of manufacture: 1981 center height: 134mm Swing over bed: 272mm Max. turning length: 200mm Chuck: Ø 110mm (3jaws) quill feed: 140mm (tailstock) Usage: The machine is suitable for boring or reaming cylindrical turned parts. Accessories: Loading magazine for cylindrical turned parts 28mm Ø 40mm long. loading device Internal cooling device

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 46003, Technical characteristics: Work Area # Maximum diameter of the clamping plate: 220 mm # Maximum turning diameter: 170 mm # Maximum machining diameter: 170 mm # Maximum workpiece length: 100 mm # X-axis travel: 495 mm / Rapid feed in X: 48 m/min # Z-axis travel: 250 mm / Rapid feed in Z: 30 m/min # Standard enclosed automation (number of loading stations by workpiece diameter: 14/(80–200 mm), 18/(30–160 mm), 30/(30–85 mm)) Main Spindle # Spindle interface to DIN 55026: Size A5 # Maximum speed: 7000 rpm # Power at 100% duty cycle: 23 kW # Torque at 100% duty cycle: 130 Nm Powered Tool Turret # Turret type: VDI40, Siemens drive 0.5.435.220, Manufacturer: Sauter # Number of stations: 12 # Maximum speed: 4000 rpm Electrical Equipment # Operating voltage: 400 V, fuse protection 80A GL # Connected load: 41 kW Dimensions # Total dimensions: Length = 3913 mm, Width = 2160 mm, Height = 2955 mm # Weight: 6500 kg Main Features and Capabilities: # Vertical design: Optimal chip evacuation and easy loading/unloading # CNC control: Siemens 840D SL # High precision: Positioning in X and Z axes via Heidenhain linear encoders # Main spindle - Manufacturer: Weiss, providing high power and wide speed range Dlodpfx Aoxw Ub Ijb Tea # Automated loading/unloading: Integrated automation supplies and removes parts # In-process probe: Marposs T25 # Live tooling: Allows drilling and milling operations in addition to turning # Chip conveyor: Knoll # Coolant filtration and cooling: Knoll KF150/950 paper filtering unit # Fire suppression system: Kraft & Bauer # Electrostatic oil mist filter: IF Vario EC1500 Machine status: WORKING

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 738 mm, travel distance Z-axis: 240 mm, spindle speed (max.): 6,500 rpm, turning height: 275 mm, turning diameter over bed slide: 200 mm, TECHNICAL DETAILS x-axis travel: 738 mm Dodpfowymyqjx Ab Tela z-axis travel: 240 mm Lathe Swing diameter: 200 mm Turning height: 275 mm Spindle speed: 6,500 rpm Control Control system: Siemens Sinumerik Tool Magazine Number of tool positions in magazine: 12 MACHINE DETAILS Total power requirement: 82 kW Weight Machine weight: approx. 14 t

Condition: used, Year of construction: 2013, Technical details: turning diameter: 250 mm swing diameter: 250 mm turning height: 200 mm total power requirement: 37,7 kW chuck diameter: 315 mm spindle speed max.: 5500 1/min travel -x axis: 625 mm travel -y axis: +100/-80 mm travel -z axis: 250 mm worktool system: VDI 30+40 weight of the machine ca.: 8 t The synchronous spindle is powered with 37.7 kW of power, a torque of 300 Nm and a maximum speed of 5,500 rpm. Typical components are ball cages, ball hubs, gear wheels, sliding sleeves, pump wheels, flanges, synchronizer rings, bearing rings and pivot pins. The machine bed is made of Hydropol, a mixture of special concrete and steel, which ensures the Dlsdpfxjvxuc Eo Ab Tsa greatest smoothness and precision even with larger components and powerful machining. *

Condition: good (used), functionality: fully functional, Type PM1-F-Z, data: Center height: 110 mm Center distance: 160 mm Spindle bore: 23 mm 3 right-hand speeds and 3 left-hand speeds approx. 670 / 1140 / 2840 rpm Dsdpfsxtvfaox Ab Tela

Condition: good (used), spindle head for lathe, lathe spindle head, lathe spindle head -Manufacturer: Scherer, spindle head from vertical lathe VDZ 80 -Clamping head: Hainbuch SK80BZIG SP.0219.0034.00 -Clamping device: SMW Autoblok Cil.85 SIN-S no-cc -Individual components: see photos -Price/Delivery: complete -Dimensions: 1350/560/H495 mm -Weight: 330 kg Dodsvypufopfx Ab Tola

Year of construction: 1979, condition: not inspected (used), Feinbau lathe, automatic lathe PM1 HUC S -WKG 1269- Offered here is a lathe from the company Feinbau. Technical data: Manufacturer: Scherer-Feinbau Type: PM1-HUC-S Year of manufacture: 1979 Workpiece holder: hydraulic collet chuck Workpiece ejector: pneumatic cross slide: 100mm feed path longitudinal slide: 80mm feed path feed type: hydraulic Dlodpfxshg Nl Ej Ab Toa type of control: relay control Spindeldrehzahlen: 1400/2000/2800 total power: 4kW weight: 1000kg space requirement: 2000 x 1500mm

Condition: repair required (used), Year of construction: 2011, functionality: not functional, machine/vehicle number: 66101, Technical Specifications: Work Area - Maximum diameter of the clamping plate: 260 mm - Maximum turning diameter: 250 mm - Maximum machining diameter: 220 mm - Maximum workpiece length: 200 mm - X-axis travel: 626 mm / X-axis rapid traverse: 60 m/min - Z-axis travel: 250 mm / Z-axis rapid traverse: 30 m/min - Y-axis travel: +100/-90 mm / Y-axis rapid traverse: 30 m/min - Standard closed workpiece automation: Pick-up station from individual nests, conveyor system Main Spindle - Spindle according to DIN 55026: Size 6 - Maximum speed: 5,500 rpm - Power (continuous duty): 38 kW - Torque (continuous duty): 300 Nm Tool Holder with Driven Tools - Tool interface: VDI40 DIN 5480 - Number of positions: 12-station disc turret, all positions driven - Maximum speed: 6,000 rpm, Torque capacity: 70–100 Nm per driven station Electrical Equipment - Operating voltage: 2x400 V, 160A GL fuse - Connected load: 90 kW Dimensions - Overall dimensions: Length = 3,390 mm, Width = 2,850 mm, Height = 2,400 mm - Weight: 16,000 kg Main Features and Capabilities: Dljdpjxwk S Asfx Ab Tea - Vertical design: Optimized for efficient chip removal and straightforward loading/unloading - Control system: Siemens 840D SL - High precision: Positioning accuracy in X, Y, and Z axes ±0.001 mm with Heidenhain linear scales - Main spindle: High power and wide speed range - Automated loading/unloading: Integrated systems for part feeding and removal - Live tooling (Sauter turret): Enables drilling and milling operations - Cooling & paper filtration unit: DGS System GMBH, 950 L - Chip conveyor: DGS System GMBH - Hydraulic unit: Rexroth Q = 13 l/min, pmax = 65 bar - Mist extraction units: IFS model IFM1000 - Documentation: Available Machine Condition: NOT WORKING - Pick-up pneumatic cylinder - Turret indexing motor - Door closing pneumatic piston - Door safety switch (Euchner) - Z-axis linear scale - Siemens power supply

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 320 mm, travel distance Z-axis: 1,220 mm, spindle speed (max.): 5,500 rpm, turning diameter: 250 mm, turning height: 1,250 mm, TECHNICAL DETAILS Turning diameter: 250 mm Swing diameter: 280 mm Turning height: 1,250 mm X-axis travel: 320 mm Z-axis travel: 1,220 mm Chuck diameter: 250 mm Spindle speed: 5,500 rpm Diameter of front bearing: 130 mm Spindle bore: 65 mm Control Dlsdpfx Aewymvfsb Toa Control system: Siemens Sinumerik MACHINE DETAILS Total power requirement: 80 kW Weight Machine weight: approx. 17 t

Condition: good (used), turning clamp, 4th axis, rotary table, rotary indexing table, controlled rotary table, dividing head, rotary indexing table, indexing table -Manufacturer: Scherer, indexing table from vertical lathe VDZ 80 DS with accessories -Servo motor: Siemens 1FK7042 -Individual components/accessories: see photos -Transport dimensions: 1200/720/H620 mm Dodsvu Tmbepfx Ab Tola -Weight: 198 kg

Condition: repair required (used), Year of construction: 2011, functionality: not functional, machine/vehicle number: 68178, Technical characteristics: Work Area - Maximum diameter of clamping plate: 260 mm - Maximum turning diameter: 250 mm - Maximum machining diameter: 220 mm - Maximum workpiece length: 200 mm - X-axis travel: 626 mm / Rapid traverse in X: 60 m/min - Z-axis travel: 250 mm / Rapid traverse in Z: 30 m/min - Standard closed workpiece automation via gantry loader and individual nest conveyor system Dljdpexwk Iwefx Ab Tsa Main Spindle - Spindle interface according to DIN 55026: Size 6 - Maximum speed: 5,500 rpm - Continuous power (100% duty cycle): 38 kW - Continuous torque (100% duty cycle): 300 Nm Tool Turret with Driven Tools - Tool interface: VDI40 DIN 5480 - Number of positions: 12-station disc turret, all positions driven - Maximum speed: 6,000 rpm - Torque capacity per driven station: 70–100 Nm Electrical Equipment - Operating voltage: 2x400 V, 160A GL fuse - Connected load: 90 kW Dimensions - Total dimensions: Length = 3,390 mm; Width = 2,850 mm; Height = 2,400 mm - Weight: 16,000 kg Main Features and Capabilities: - Vertical design: Optimal chip evacuation and easy workpiece loading/unloading - CNC control: Siemens 840D SL - High precision: Positioning accuracy in X and Z axes by Heidenhain linear scales - Main spindle (Weiss): High power and wide speed range - Automated loading/unloading: Parts are loaded and unloaded via integrated automation - Live tooling via Sauter turret: Extends machining capability to include drilling and milling - Cooling and paper filter unit: DGS System GMBH, 950L - Chip conveyor: DGS System GMBH - Hydraulic power unit: Rexroth, flow Q = 13 l/min, max. pressure = 65 bar - Mist extraction units: IFS model IFM1000 - Documentation available: Yes Machine Condition: NOT WORKING - Loading/unloading sliding doors defective - Linear scale X axis (2 units) - Turret position sensor (furT30) - Spindle clamp/unclamp sensor - Emulsion solenoid valves (4 units)