Fine-feed drive

DEMAG

Year of construction: 2019, operating hours: 18,138 h, condition: ready for operation (used), overall weight: 25,340 kg, This SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 50 mm, clamping force of 3,500 kN, and tiebar spacing of 820 mm. It has operated for 18,138 hours with 12,875,090 cycles. If you are looking to get high quality moulding capabilities consider the SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 machine we have for sale.Contact us for more information. Tsdpfsx D Nxzox Amrsc Additional information • Screw Diameter: 50 mm • Maximum Dosing Volume: 530 cc • Cycles: 12875090 • Tiebar Spacing: 820 mm • Clamping Force: 3500 kN

Condition: excellent (used), Year of construction: 1983, Faceplate diameter: 1250 mm Max. swing diameter: 1400 mm Max. swing height: 1160 mm Max. ram stroke, vertical / horizontal: 755 / 840 mm Table load capacity: unlimited Faceplate speed range: 5.6 - 300 rpm Vertical slide angular adjustment: 45° Feed rate range: 0.044-8 mm/rev Rapid traverse rate: 2 m/min Drive power: 55 kW Footprint L x W x H: 2660 x 2710 x 3360 mm Tsdpfx Amsy Ex Eporoc Total weight: 16,500 kg Accessories / Special features: • 2-axis digital display, manufacturer: ACU-Rite • Faceplate, Ø 1250 mm, with 4 chuck jaws • 5-position turret • Taper turning • Profile turning Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: ready for operation (used), Year of construction: 2005, clamping force: 6,500 kN, screw diameter: 80 mm, injection weight: 1,600 g, Hydraulic injection moulding machine manufactured in 2005. This DEMAG D 650 features a clamping force of 6500 kN and a screw diameter of 80 mm. It offers a shot weight of 1,600 g and includes a handling system by Wittmann. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG D 650 machine we have for sale. Contact us for further details. • Hydraulic Core Pulls: 4 • Hydraulic Cascade: 8 • Hot Runner Control Zones: 16 • Handling System: Wittmann W 843 Pro 0815 • Handling System Year of Manufacture: 2021 • Z-axis Travel: 3,000 mm • Y-axis Travel: 2,000 mm • X-axis Travel: 1,200 mm Tjdoz E Hikopfx Amroc • C-axis: Servo, 180° • B-axis: Servo, 270° • Machine in very good overall condition • Annual maintenance has been carried out

Condition: ready for operation (used), Year of construction: 2007, operating hours: 91,250 h, clamping force: 13,000 kN, screw diameter: 110 mm, injection weight: 5,200 g, Hydraulic injection moulding machine manufactured in 2007. This DEMAG D 1300 features a clamping force of 1300 t and an injection weight of 5200 g. It includes a handling system with a Wittmann DR 853 robot, offering impressive Z, Y, and X-axis strokes of 3500 mm, 2500 mm, and 1600 mm respectively. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG D 1300 machine we have for sale. Contact us for further details. Todpfx Amsz E Hh Hjrsc - Control Brand / Model: Demag NC4- Hydraulic Core Pulls: 4- Hydraulic Cascades: 12- Hot Runner Control Zones: 32- Handling System / Robot: Wittmann DR 853 227 (YOM 2014)- Robot Z-Axis Stroke: 3500 mm- Robot Y-Axis Stroke: 2500 mm- Robot X-Axis Stroke: 1600 mm- Robot C-Axis: 90°- Robot B-Axis: Servo 270°- General Condition: Very good overall condition, annual maintenance performed, currently under power / in series production

Year of construction: 1968, condition: good (used), Steel chain hoist, Elektus A2 type, 380 volts, 2 lifting speeds, 3-meter chain length, 12-meter cable length, control pendant. Tedpfx Amed E Akceroc

Condition: ready for operation (used), Year of construction: 2015, operating hours: 41,610 h, clamping force: 4,118 kN, screw diameter: 70 mm, Hydraulic injection moulding machine manufactured in 2015. This DEMAG D 420 features a clamping force of 420 t and an injection weight of 1100 g. It includes a handling system with impressive working strokes of Z=2500 mm, Y=1600 mm, and X=900 mm. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG D 420 machine we have for sale. Contact us for further details regarding this machine. Todpoz E Hhyofx Amroc - Control Unit: NC 5- Injection Weight: 1,100 g- Core Pulls (Hydraulic): 4- Hydraulic Cascades: 4- Hot Runner Zones: 40- Handling System / Robot: Wittmann DR 832 0989 (YOM 2015)- Robot Linear Axes: Z=2500 mm (Horizontal), Y=1600 mm (Vertical), X=900 mm (Demolding)- Robot Servo Wrist Axes: C-Axis servo 180°, B-Axis servo 270°

Condition: excellent (used), Year of construction: 2015, year of last overhaul: 2025, Demag Systec 210-840 (2015) SERVO Manufacturer: Sumitomo SHI DEMAG Type of machine: Systec 210/580-840 Clamping force [kN]: 2100 Shot volume [cm³]: 358 Clearance between tie bars hor. [mm]: 580 Clearance between tie bars vert. [mm]: 580 Mold height min. [mm]: 340 Mold height max. [mm]: 690 Opening stroke max. [mm]: 575 Daylight max. [mm]: 1365 Year of manufacture: 2015 Machine dimensions L/W/H [mm]: 6022 / 1556 / 2090 Control unit and software version: NC3 Max. weight of entire molding tool [kg]: 3300 Screw diameter [mm]: 45 Screw design: 3 zone Tsdpozbg Ezofx Amrjc Screw relation (length/diameter): 20:1 Screw back flow valve: Yes Ejector system type: Hydraulic Installed heating power [kW]: 39 No. of integrated hot runner circuits: 12 Number of temperature control electrical valves: 28 Number of cascade controls: 2 Connection to central drying system: Yes Unloading robot system available: Yes Number of tempering units: 3 Tempering units max. temperature [°C]: 160 Machine oil capacity [l]: 400 Net power of hydraulic pump engine [kW]: 26

Condition: used, Year of construction: 1900, functionality: fully functional, volume flow: 6,600 m³/h, final pressure: 2.5 bar, power: 610 kW (829.37 HP), input voltage: 6,600 V, input current: 69 A, type of input current: AC, 2 pieces of cooling water pumps. Vertical column pipe pumps with open screw impeller Manufacturer: KSB Tedpfxexb Tvxo Amrec Type: SEZ N 8-60 Impeller design: Open screw impeller Number of impellers: 1 Immersion depth: 2550 mm Shaft seal: Mechanical seal Radial bearing: RESIDUR fiber ceramic Support bearing: Segment slide bearing Cooling: Self-cooling with CuNiFe cooler Speeds: 745 / 600 / 496 rpm Flow rate: 6600 / 5750 / 4750 m³/h Delivery head: 25 / 15.5 / 10.5 meters Shaft power: 525 kW / 280 kW / 180 kW Pump efficiency: 85.7% Pumped medium temperature: 20°C NPSH: 8.0 m Casing: S235JRG2 Shaft: 1.4313 Impeller: 1.4409 Impeller diameter: 766 / 571 mm Electric motor: Siemens 1LA44548 AW94Z Power: 610 kW Voltage: 6600 Volt Current: 69 Ampere Including frequency converter Dimensions: Discharge nozzle: DN 800 Pressure rating: PN 10 Pump weight without motor: 4100 kg Length with motor: 7723 mm

Year of construction: 1992, condition: used, Technical details: lifting capacity: 12,5 t span width: 9000 mm stroke speed: 5 / 0,8 m/min rope diameter: 14 mm lifting height max. hook position: 10.000 m total power requirement: 13,6 kW weight of the machine ca.: 5,2 t dimensions L x W x H: Brücke: ca. 10,3 x 2,2 x 2,3 (3,15to) m dimensions L x W x H: Laufträger Nr.1: ca. 4,38 x 0,8 x 0,7 (1,01to) m dimensions L x W x H: Laufträger Nr.2: ca. 4,38 x 0,8 x 0,7 (0,99to) m dimensions L x W x H: Pal. Zubehör ca. 4,2 x 0,8 x 0,4 (0,16to) m Todsvbh Rhjpfx Amrsc Crane classification according to DIN 15018H2B3 Crane trolley: DEMAG type RF 400; type KBF 100 A8/2, travelling speed 12.5 / 50 m/min., size of travel wheels Ø 200mm (16 pcs.) Main hoist trolley EKDH 532 H20 KV3-4/1 F6; type KBF 90 A8/2, travelling speed 5 / 20 m/min., size of travel wheels Ø 160mm (4 pieces) DEMAG DH5 32 hoist; lifting height 10,000 mm; braked with sliding carriage; main lifting speed 5 / 0.8 m/min. Single hook size 5 with rope safety device Rope Ø 14mm; rope length 46 metres; drive unit group 1Bm Bridge Hoisting gear Trolley/crab Wireless remote control and conventional control *

Condition: excellent (used), For sale: Professional lifting set: DEMAG chain hoist + VETTER travelling beam – complete kit High-quality German-made equipment, designed for industrial use. TECHNICAL DATA: Lifting capacity: 2000 kg (2 tons) Beam length: approx. 242 cm Hoist manufacturer: DEMAG Beam manufacturer: VETTER Fördertechnik Power supply: 400V, 3 phases, 50 Hz Year of manufacture: 1997 Lifting speeds: 2-speed (slow + fast) Control: pendant remote (up/down + STOP) Chain: original, in good condition Trolley: manual (moves along the beam) DEMAG hoists are known for their industrial durability and reliability. SET INCLUDES: ✔ DEMAG chain hoist ✔ VETTER travelling beam (approx. 2.4 m) ✔ Manual trolley ✔ Control pendant (remote) ✔ Wiring ✔ Safety hook TECHNICAL CONDITION: Todpfx Amey A Tgcjrjc unit in working order normal signs of use ready for operation without additional investment APPLICATIONS: workshops warehouses production halls service stations assembly work

Condition: used, Year of construction: 1950, pressure 500 t Todpfxoyutvys Amrsc distance between columns 1600 mm stroke 60 mm max. ram stroke 60 1 / min ram adjustment 100 mm dayligth 700 mm Table area 1600x1400 mm ram surface 1400x1150 mm weight of the machine ca. 40 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2007, operating hours: 67,000 h, clamping force: 250 kN, displacement volume: 530 cm³, injection pressure: 2,426 bar, overall weight: 14,200 kg, screw conveyor diameter: 50 mm, Payment terms: 100% net before taking delivery of the machine Delivery time: by arrangement Tedpjwz R Iuofx Amroc Freight basis: ex-works

Condition: used, Year of construction: 2004, clamping force: 110 kN, displacement volume: 2,926 cm³, injection pressure: 1,600 bar, overall weight: 5,650 kg, screw conveyor diameter: 45 mm, terms of delivery: EXW (ex Works) delivery time: on request Tedpfxozh N Tye Amrjc terms of payment: 100% prior to delivery

Year of construction: 1980, condition: good (used), Swiveling welding rotator, rotary tilting table, container rotator, welding rotator, welding rotator, welding fixture, welding rotator, welding rotator and tilting table, welding rotator, welding rotator tilting table -Manufacturer: Gieseking, Motorized welding rotary and tilting table -Type: SD 1 -Load capacity: 1,000 kg -Rotational movement: electrically continuously adjustable 0-1 rpm -Faceplate: Ø 1010 mm -Three-jaw chuck: Ø 290 mm, bore Ø 74 mm Tedpfeyanilsx Amrec -Axles: 2 pieces -tiltable: electric -Height adjustment: No -Transport dimensions: 1750/1170/H1620 mm -Weight: 1392 kg

Condition: used, Demag plasticising unit IU mm Tedsh Nv Itepfx Amrsc - removed from Demag Ergotech system 200-560-320 - removed from running machine - fully functional - displacement: 231 cm³ - injection pressure: 1855 bar - moulded part weight max. PS: 210 g - cylinder E: .01 mm, A: .01 mm   - screw E: 39.55 mm, A: 39.8 mm, RSP 39.92 mm - Ø - 06--DEM-001 - year of manufacture 2005 - also suitable for IU320 and IU610 - nut and coupling must be exchanged manufacturer: Demag Dition: gebraucht