Used Felder Bf6 for sale (107)

Condition: as good as new (ex-display), Year of construction: 2023, Exhibition Machine For sale is our Felder RL-125 clean air extraction unit from our showroom, with a maximum air volume flow of 1900 m³/h. The extraction unit is in like-new condition and has been inspected and serviced by our specialist staff. (Fully functional) Technical data: - H3 dust tested - Residual dust content < 0.1 mg/m³ - Max. air volume flow 1900 m³/h - Chip collection volume 200 litres - Year of manufacture: 2023 The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Kedpfjxd Aitjx Ah Nell Related terms: extraction, extraction unit, clean air unit, clean air, RL Reference: R-A0117-102

Condition: like new (used), Year of construction: 2024, Demonstration machine For sale is our Felder RL-300 clean air extraction unit from our showroom, with a maximum air flow rate of 6,000 m³/h. The extraction unit is in as-new condition and has been inspected and serviced by our technical staff. Ksdpoxdlwmefx Ah Nell Technical specifications: - Extraction capacity: 6,000 m³/h - Maximum negative pressure: 2,450 Pa - Extraction connection diameter: 300 mm - Chip container volume: 2 x 210 liters - Dimensions: 3,015 x 970 x 2,280 mm (L x W x H) - Automatic extinguishing system - Steel impeller - Motor power: 8.2 kW - Year of manufacture: 2024 The clean air unit is located at A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air unit, clean air, RL Reference: R-A0117

Condition: as good as new (ex-display), Exhibition machine For sale is our Felder RL-200 clean air extraction unit from our showroom, featuring a maximum air flow rate of 4,000 m³/h. The extraction unit is in mint condition and has been inspected and serviced by our qualified personnel. Kodpfoxdkzqjx Ah Nsll Technical data: - H3 dust-tested - Extraction connection diameter: 200 mm - Extraction can be installed on right or left side - Manual chip shaker - Steel impeller - Max. air flow: 4,000 m³/h - Minimal space required: 1,775 x 898 x 2,005 mm (L x W x H) - Year of manufacture: 2024 The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air unit, clean air, RL Reference: R-A0117

Condition: as good as new (ex-display), functionality: fully functional, Demonstration machine For sale is our Felder RL-140 clean air extraction unit from our showroom, with a maximum air volume flow of 2,500 m³/h. The extraction unit is in like-new condition and has been inspected and serviced by our professional staff. Technical data: - H3 dust-tested - Extraction connection diameter: 140 mm - Extraction can be configured for right or left side Kledpfxjxdkw Es Ah Nol - Manual chip shaker - 10 m² filter area - Max. air volume flow: 2,500 m³/h - Minimal footprint: 1,040 x 898 x 1,940 mm (L x W x H) The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air unit, clean air, RL Reference: R-A0117

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, FELDER G330 Edge Bander Used edge bander, post-service inspection. - Machine in excellent technical condition. - Year of manufacture: 2013. - One-owner machine. - Recently serviced. EQUIPMENT: Electrical equipment: - Supply voltage: 3x 400 V - Power frequency: 50 Hz Workpiece dimensions: - Edge thickness: 0.4 – 3.0 mm - Workpiece thickness: 10 – 45 mm - Minimum workpiece width: 70 mm - Minimum workpiece length: 210 mm Units: - Edge feeding from coil via feed plate - Edge feeding for thicknesses 0.4–3 mm, manual feed for individual edging strips - Guillotine shear for trimming coil edges up to 3 mm thick - Gluing unit for hot-melt granulate adhesive, Teflon-coated glue pot - Spring-loaded pressure unit, 1 straight pressure roller and 1 pressing roller - Saw trimming unit: 9,000 rpm, 0.18 kW, HW saw blades Z=16, Ø 80 mm Kedpfxoxly I Ao Ah Noll - Multifunctional milling unit: 12,000 rpm, 0.22 kW, for rounding, straight milling, and chamfering - Mechanically-activated corner scraper unit for R=2 mm - Mechanically-activated flat scraper unit Operation: - Control panel with LCD display and keypad - Quick, tool-free unit adjustment system Feed: - Workpiece feed with chain-type conveyor - Feed speed: 8 m/min - Extendable support General data: - Extraction port Ø 120 mm Overall dimensions: - Length: 2,000 mm - Width: 800 mm - Height: 1,500 mm - Weight: 360 kg Machine financing available via leasing or installments. Just visit our website: jbsmaszyny.pl We invite you to test the machine. Where to see our machines? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE, Poland Nationwide machine transport! Phone: 663 495 647 (German) Phone: 664 335 475 (English) Phone: 530 632 386 (English)

Condition: like new (used), Year of construction: 2024, Machine Technical Data: Carriage length: 2500 mm X-Roll carriage guide system Saw adjustable from 0–45° Saw lifting and lowering Digital measurement display on right side Cutting width right: 850 mm Spindle diameter: 30 mm Spindle tilt: 0–45° adjustable Spindle height adjustable Left-right rotation Spindle speeds: 3,500 / 6,500 / 8,000 / 10,000 rpm Max. diameter of milling tools: 230 mm Spindle working height: 115 mm Kledpewi Uftsfx Ah Nel Spindle covers Main saw motor: 5.5 kW Milling motor: 5.5 kW European CE Certificate

Condition: excellent (used), Year of construction: 2017, Format circular saw Kappa 550 e-motion (Formatkreissäge) - 10 kW, 3 speeds: 3000/4000/5000 rpm - Year of manufacture: 2017 - Scorer operational display - Crosscut fence 3200 mm, swivels 90°–45°, 2 fence jaws - Extension table 1250 x 650 mm - "X-Roll" sliding table, cutting length 3200 mm, edging shoe - Position-controlled rip fence with digital readout in the operator panel at eye level, cutting width 1250 mm Klodpfxew Tfahe Ah Nsl - Overhead guard: hood for 90° cuts and for angled cuts, height-adjustable and pivotable out of the working area - e-motion control: 15" color touchscreen, operator panel at eye level, USB interface and prepared for network connection, adjustable and pivotable out of the working area - Saw blade diameter 250–550 mm, max. cutting height 202 mm - Position-controlled height and tilt adjustment 0°–46° - Table saw with table extension up to 1200 mm behind the saw axis, powder-coated steel - Weight: 1300 kg - Scorer operational display - Total operating hours: 443.47 h - Comes with many almost new saw blades and groove cutter blade

Condition: used, Year of construction: 2010, Used machine Year of manufacture 2010 With joining unit and corner rounding unit Control panel with LCD display and keypad Joining unit with 2 counter-rotating diamond cutters With edge feeder for roll and strip material With glue roller and glue unit With pre-trimming from the roll With pressure unit With trimming unit with pulling trimming cut With flush and radius trimming unit Corner rounding unit for front edges Manual unit adjustment Edge thickness 0.4-5 mm Workpiece height 8-60 mm Ksdpfx Aew I H Rksh Nell Min. workpiece width 70 mm Min. workpiece length 140 mm Feed speed 11 m/min With radius scraper unit With flat scraper With polishing unit Extendable workpiece support Extraction connection 120 + 2 x 80 mm Weight approx. 990 kg L x W x H 4550 x 1550 x 1100 mm Availability: Short-term Storage location: Flörsheim

Condition: used, Albatros Numerical Control with TPA CAD Software Working range on X-axis mm 3260 Working range on Y axis mm 1200 Working range in Z-axis N ° 2 work fields Bar worktop No. 6 electronically adjustable bars by C.N. Line laser for virtual 0 position in Y direction N° 4 pneumatic Bakelite bars for lifting the panel No. 3 electronically adjustable suction cups by C.N. for each bar with vacuum seal for fixing the panel during processing No. 1 vertical electrospindle with C-axis, with automatic tool changer with No. 10 positions, Hsk type cones Automatic tool change system with 12 positions - positioned on the machine side Drilling head with 17 spindles arranged as follows: - No. 8 verticals on X axis - N° 5 verticals in Y axis - No. 2 horizontal on X axis - N° 2 horizontal in Y axis No. 2 blade groups for making grooves on the X and Y axes Front protection and safety system with carpets Automatic lubrication system (Air conditioning system for cooling and cleaning of machine control) Vacuum pump mc/h 250 Kledpfsvph Hxjx Ah Nol

Condition: like new (used), For sale is a used Felder spindle moulder F-900 Z with mortising and slotting table length of 1300 mm. The machine is used as a demonstration unit in our showroom and is therefore in like-new condition. Technical data: - 5 spindle speeds - Spindle tiltable 90° - 45° - Fence for tooling up to Ø 230 mm - Multi-adjustment system - Mortising and slotting table 1300 mm - Electrically height-adjustable and tiltable with "PowerDrive" - Motor power 7.3 kW / 9.9 HP SD-Start - Year of manufacture: 2022 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Info Tel. 06244-20299. Related terms: spindle moulder, milling machine, moulding Klsdpfxow Hfd Io Ah Nol Reference: R-A0117

Condition: excellent (used), For sale is a used Felder AD5-31 jointer-thicknesser with a planing length of 1500 mm. The machine is used as a demonstration unit in our showroom and is therefore in like-new condition. Technical data: - 4-knife cutterblock - Planing width 310 mm - Planing length 1500 mm - Max. workpiece height 230 mm - Suction port Ø 120 mm - Motor power 4 kW / 5.4 HP - Year of manufacture 2022 Kodpfsw Hcygox Ah Nell The machine is located at A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Contact: Tel. 06244-20299. Related terms: jointer, thicknesser, planer, jointer-planer, thickness planer Reference: R-A0117

Condition: like new (used), For sale is a used Felder AD7-41 surface-planer thicknesser with a planing thickness up to 230 mm. The machine is in use as a demonstration unit in our showroom and is therefore in like-new condition. Technical specifications: - 4-knife cutterblock - Planing width: 410 mm - Table length: 2000 mm - Max. workpiece height: 230 mm - Electric thickness adjustment PowerDrive - Extraction port Ø 120 mm - Motor power: 4 kW / 5.4 HP - Year of manufacture: 2023 Kljdpsw Hckrjfx Ah Njl The machine is located in A-5431 Kuchl and can be inspected during our business hours at any time. Subject to prior sale! For information call 06244-20299. Related terms: surface planer, thickness planer, planing machine, jointer, thicknesser Reference: R-A0117

Condition: like new (used), Year of construction: 2023, functionality: fully functional, For sale is a Felder F-700 Z milling machine with 4 spindle speeds. The machine is used as a showroom model at our facility and can be considered as new, with full warranty/guarantee. Technical specifications: - 4 milling speeds - Milling spindle tiltable 90° - 45° - Milling fence for tools up to Ø 230 mm - Multi-adjustment system - Tenoning and slotting table - Motor power 5.5 kW / 7.5 HP, SD start - Year of manufacture: 2023 / as new Kljdpfowp Ri Uox Ah Nol The machine is located at A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Info Tel.: 03137-3109 Related terms: milling cutter, milling machine, milling Reference: R-D1618

Condition: like new (used), Year of construction: 2022, The Felder Creator 950 Premium is a high-precision CNC machining center designed for the efficient and flexible production of wooden parts. Thanks to its robust design and modern technology, it enables fast and precise milling, drilling and grooving. The machine is ideal for furniture and interior design manufacturers looking for a reliable and powerful CNC solution. Technical information Machining area: X = 3500 mm, Y = 950 mm, Z = 80 mm Axis positioning speed: Depends on the selected safety system Milling spindle: 12 kW (S6) HSK F63, 24,000 rpm Safety features: CE certification, optical operation indication Power supply: 3 x 400V / 50 Hz Ksdpfev I Sytox Ah Nsll Software: WoodFlash - CNC module, tool database, program editor Machine composition Continuous CNC center with clamp drive in the X direction and fixed gantry structure in the Y direction Automatic central lubrication Pneumatic pressure rollers for better workpiece fixation Height-adjustable work surface for optimal handling Pinning unit with precise glue dosing

Condition: like new (used), Year of construction: 2022, The Felder profit H80 is a professional CNC machining center suitable for high-volume furniture production and other woodworking applications. The machine enables precise machining with high speed and efficiency. Thanks to its gantry design and advanced vacuum system, stable and safe machining of even the largest parts is ensured. Technical information Machining area: X = 3090 mm, Y = 2100 mm, Z = 85 mm Power transmission: Rack in X and Y axes, ball screw in Z axis Feed speed: X = 25 m/min, Y = 25 m/min, Z = 15 m/min Vacuum table: 10 vacuum fields with Smart Zoning function Milling spindle: 12 kW (S6) HSK F63, 24,000 rpm Power supply: 3 x 400V / 50 Hz Software: Compact Control - supports ISO Code and WoodFlash Extraction: Central suction nozzle with slide valve distribution Safety features: Light barrier system, optical operation indication Machine composition Robust gantry construction with double drive in X axis Kjdpfx Aov I Sxpoh Noll Fully automated central lubrication of all os Control panel with 24" LED display and USB interface Green Line energy package for energy saving Drilling head DH 16 4H 2S – 12 vertical and 4 horizontal spindles Loading unit with lifting table for efficient handling Conveyor belt on the machine output side for smooth workpiece removal

Condition: ready for operation (used), Year of construction: 2016, operating hours: 5,213 h, functionality: fully functional, machine/vehicle number: 302.09.016.16, travel distance X-axis: 4,010 mm, travel distance Y-axis: 1,970 mm, travel distance Z-axis: 455 mm, number of slots in tool magazine: 18, saw blade diameter: 350 mm, TECHNICAL DETAILS Number of axes: 5 Kljdjwkq Tpspfx Ah Nol Table dimensions (L × W): 5,000 × 1,550 mm X-axis working area: 4,010 mm Y-axis working area: 1,970 mm Z-axis working area: 455 mm Travel speeds X-axis travel speed: 70 m/min Y-axis travel speed: 70 m/min Z-axis travel speed: 23 m/min Tool and saw unit Tool changer: 18 positions Saw blade diameter: 350 mm Extraction and vacuum Vacuum pump capacity: 90 m³/h Extraction connection diameter: 300 mm Extraction capacity: 5,100 m³/h MACHINE DETAILS Operating hours: 5,213 h Voltage: 400 V Current consumption: 46 A Air pressure: 8 bar Machine weight: 4,100 kg EQUIPMENT - Wood Flash software - 3D simulator included - Documentation available - CE marking present - Note: Vacuum pump bearings must be replaced

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 320.03.003.13, travel distance X-axis: 4,050 mm, travel distance Y-axis: 2,560 mm, travel distance Z-axis: 280 mm, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 100 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 3,120 mm, feed length Y-axis: 2,160 mm, feed length Z-axis: 105 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 15 m/min, nominal power (apparent): 11 kVA, torque: 4 Nm, controller manufacturer: WoodFlash CAD, H10 CNC Control, controller model: H10 CNC Control, Windows 10, workpiece length (max.): 3,120 mm, workpiece width (max.): 2,160 mm, workpiece height (max.): 105 mm, total height: 2,510 mm, total length: 7,760 mm, total width: 4,860 mm, rotational speed (min.): 1,000 rpm, rotational speed (max.): 24,000 rpm, overall weight: 3,800 kg, spindle motor power: 10,000 W, number of spindles: 1, number of slots in tool magazine: 8, tool length: 300 mm, tool diameter: 180 mm, tool weight: 1,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, Engine power: 13.59 PS/HP (10 kW) Year of manufacture: 2013 Motor voltage: 3x 400 V Motor frequency: 50 Hz Kljdpfx Aow Tkm Tjh Nel Weight (kg): 3800 Dimensions (L x W x H mm): 8768x4864x2510

Condition: ready for operation (used), Year of construction: 2002, Brand: Felder Modell: FS2200 Year of manufacture: 2002 With sanding shoe in good condition Driven left and right Tech. info: Work table size: 2200x800 mm Wheel diameter: 250 mm Band width: 150 mm Belt length: 6200 mm Chip nozzle: 160 mm Motor: 4 kW, 50 Hz, 380V, 3-phase Size for transport: 320x110x145 cm Stock no: 2002056 Klodpfeth R Tlex Ah Nsl

Condition: excellent (used), Year of construction: 2021, operating hours: 3 h, functionality: fully functional, Machine almost not used, like new, year of production 2021. Dimension of the table 220x80cm. Kljdpfxoudy D Te Ah Nel

Condition: like new (used), Year of construction: 2011, I sell the combined machine format sliding table saw with scoring + spindle moulder Manufacutrer: FELDER Austria Klsdpfx Aor Alzpeh Nol Model: KF700S. Year 2011. Cutting length 3200mm. Cutting height 95mm. Saw blade and spindle moulder tilting 0-45° Saw blade and spindle moulder height adjustment digital Digital display for parallel fence and working height. Turn on the main saw blade and scoring unit from the sliding carriage. Main motor format sliding table saw 3,0 KW / (3200/4500/5800 rpm adjustable) Scoring motor format sliding table saw 0,75 KW Main motor Spindle moulder 5,5 kW Tools, Optionals, and equipment on photos included in price. Very good condition. Available immediately. Including full documentation and CE Certificate.

Condition: excellent (used), Year of construction: 2013, I sell the format sliding table saw with scoring Manufacutrer: FELDER Model: K975 Year 2013 Cutting length 3200mm. Cutting width 1350mm Cutting height 130mm (at saw blade 400mm) Saw blade and scoring tilting 0-45° digital Saw blade and scoring height adjustment digital Parallel fence manual adjustable. Turn on the main saw blade and scoring unit from control panel Turn on the main saw blade and scoring unit from aluminium sliding table Kedpfx Astt Nq Deh Noll Main motor format sliding table saw 5,5KW (7,5 HP) (3500/4500/5500 rpm adjustable) Scoring motor format sliding table saw Tools, Optionals, and equipment on photos included in price. Very good condition. Available immediately.

Condition: excellent (used), Year of construction: 2011, working width 950mm 1 kombi unit pneumatic segmented pad two feeding speed electric table regulation pneumatic oscillation Kodpfx Aew Afd Hoh Nsll motor power 11kW year of production 2011

Condition: like new (used), band width 150mm mechanical oscillation Kedjt I Df Ropfx Ah Nell possible to sanding on pad or plane additional table for sanding unregular edges possible to work without oscillation tables tilt year 2008

Condition: excellent (used), Year of construction: 2008, working width 510mm 4-knives shaft tables length 2250mm motor power 7,35kW angle regulated fence Kljdpfxew Ad Iws Ah Nel year 2008 iron cast tables

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Device description Table width - 850mm Drill stroke - max 70mm Kledsvzapcopfx Ah Njl Number of spindles - 21 Distance between spindles - 32mm 4 pneumatic clamps Drilling depth adjustment Vertical, horizontal and angle drilling 1.5kW main engine Pneumatically adjustable drilling speed Pneumatically adjustable drilling angle Quick-release drill attachment