Used Feinmessen Stoneware Factory Suhl for sale (1,776)

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, rotary table diameter: 450 mm, position of the milling head: Schwenkbar (45°), table diameter: 450 mm, total length: 5,600 mm, gear diameter: 500 mm, total height: 3,100 mm, total width: 3,600 mm, input frequency: 50 Hz, type of input current: three-phase, spindle speed (max.): 340 rpm, table bore: 125 mm, spindle speed (min.): 80 rpm, travel distance X-axis: 325 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, overall weight: 14,800 kg, distance table to spindle center: 350 mm, tool diameter: 200 mm, controller manufacturer: Siemens Sinumerik 840D sl, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, A Pfauter PE 500 for the economical production of straight and helical spur gears up to module 12 and 500 mm in diameter – completely overhauled by SerWeMa with Siemens Sinumerik 840D sl, equipped with a gripper unit and a 32-position workpiece storage for unmanned operation. The machine is ready for operation in our hall in Chemnitz: you can inspect it under power, and if desired, we will mill your own sample part and you can take delivery of the machine here. No delivery time, no risk. Sold by Serwema Retrofit Solutions, the company that carried out the overhaul and knows the machine inside out. The general overhaul included complete geometric overhaul by grinding and scraping, new roller bearings in the main drive and in the milling head, measuring and reconditioning the worm gear, overhauled or new ball screw drives, overhaul of hydraulics, lubrication and coolant system, and new electrical equipment with Sinumerik 840D sl, Sinamics S120 and new axis motors. An electronic generating gear controls all generating and single-part machining processes, and an NC-controlled crash recovery protects the tool and workpiece in the event of a power or phase failure. New paint in RAL 7035/5015 with oil and coolant resistant two-component paint, acceptance of geometry according to SerWeMa protocol based on DIN ISO 6545. The machine controls six CNC axes: X radial, Y tangential, Z axial, A milling head swivel, B milling cutter drive and C table drive. The SerWeMa gear cutting software guides you through workpiece and tool data via masks, without the need for programming: up to three position-oriented gearings per workpiece, each with its own tool, up to three cuts per gearing with simultaneous or counter-rotating movement, form corrections for convex, conical and convex-conical profiles, lead-in and lead-out phase correction, chamfer milling, dimension correction via tooth width, two-roll or two-ball gauge, measuring stop, shift strategy with defect management per generating cutter and cutting force monitoring with automatic retraction. Technologies: generating milling, single-part milling and worm gear milling both radially and tangentially. A hand-held device with a handwheel allows setup directly in the working area. Fsdpfxoz Et E Eo Ah Ejpp Technical data: max. workpiece Ø 500 mm, max. module 12, max. milling cutter Ø 200 mm, max. milling cutter length 240 mm, shift travel 200 mm, milling cutter speed 100–450 rpm, swivel angle +25°/−45°, travel radial 325 mm (axis distance 25–350 mm), travel axial 400 mm (310–710 mm), table diameter 450 mm, table bore 125 mm, connection power approx. 60 kVA. Installation dimensions incl. automation approx. 7.2 × 4.5 × 3.3 m, weight approx. 16.8 t. Equipment: machine enclosure, chip conveyor, gripper unit with two grippers, workpiece storage with 32 positions, preparation for emission extraction (150 mm nozzle, Harting connector on the machine roof). Documentation complete in German: operating manual, electrical diagrams with parts lists, hydraulic and lubrication diagrams. Serwema optionally offers: trial part milling in our factory, additional milling arbors, assembly and commissioning at your location, operator training and a control system upgrade to Sinumerik ONE. Spare parts and service come from a single source, worldwide, even after the purchase.

Condition: good (used), Year of construction: 1982, total height: 2,000 mm, total length: 2,000 mm, total width: 1,800 mm, input frequency: 50 Hz, input voltage: 380 V, Equipment: rotational speed infinitely variable, We are offering a well-maintained Strausak 57U tool grinding machine, manufactured in 1982. Fjds Ahrdxepfx Ah Eepp Manufacturer: Strausak AG, Machine Factory Machine type: 57U Machine category: Tool grinding machine Year of manufacture: 1982 Factory number: 10338 Order number: 39741 Voltage: 380 V Frequency: 50 Hz Country of origin: Switzerland It is a universal grinding machine with hydraulic table drive and three grinding wheel holders (circumferential, pot, internal). We have upgraded the grinding wheel drive to a Poly-V belt system and equipped it with a frequency converter (two presets can be selected on the control panel!). In our operation, the machine was configured as a cylindrical grinding machine. The spindle head is driven, with five speed levels selectable via belts, and a MK5 collet chuck. Included in the delivery: 3-jaw chuck, 4-jaw chuck, reduction sleeves MK5/MK4, MK5/MK3, MK5/MK2, as well as collet adapter with collets 3, 4, 6, 8, 8.5, 10, 12, 14, 16, 18, 20, 25mm Also included are a few more grinding wheel holders and grinding wheels. The machine worked precisely and reliably until the very end. It is being sold only due to the closure of our business. If you have any questions or require more information, please feel free to send us a message or call us.

Condition: excellent (used), Small ice cube factory currently situated within national football stadium. This system was designed to supply ice for the national football stadium. We do not have any documentation currently but think it consists of 4 x 1000Kg Ziegra units set up as two double ice machines each dropping in to two mobile hoppers. The system is in excellent condition as it was only used for a short time before it was apparent that it was easier to buy the ice in and have it delivered direct to each catering outlet in the stadium. The machines are badged Williams Refrigeration (the supplier) and Manitowok but look like they are Ziegra units. Fedpfxotpc T Ss Ah Eepp

Condition: like new (used), Year of construction: 2022, Rotor: 260 mm Fsds Ah Rqvjpfx Ah Ejpp Feed opening: approx. 510 x 815 mm Rotor length: approx. 510 mm Motor: 15 kW Blades: 24 Screen: 15 / 20 mm Technical data available upon request. Completely factory-refurbished * New blades * New counter blade * New slide guide strips * Test run * New paint job

Condition: new, functionality: fully functional, operating pressure: 180 bar, high-pressure hose length: 10,000 mm, empty load weight: 119 kg, input voltage: 400 V, warranty duration: 12 months, temperature: 155 °C, The HDS 8/18-4C is one of the most powerful hot water pressure washers in the mid-range and also impresses with its sophisticated ergonomics and high level of user-friendliness. Its 4-pole, water-cooled electric motor, the robust 3-piston axial pump with ceramic pistons, and the economical eco!efficiency mode ensure maximum performance and reliable, economical operation. Many other features and performance details are also impressive, such as the optimized burner technology, detergent tank, convenient mobility concept, comprehensive safety technology, simple operation with a single switch, and clever accessory storage options. Technical Specifications: Condition: NEW Current type (Ph/V/Hz): 3 / 400 / 50 Flow rate (l/h): 300 - 800 Working pressure (bar): 30 - 180 Maximum pressure (bar): 220 Temperature (at inlet 12 °C): min. 80 - max. 155 Connected load (kW): 6 Heating oil or gas consumption at full load (kg/h): 5.2 Heating oil consumption eco!efficiency (kg/h): 4.2 Connection cable (m): 5 Fuel tank (l): 15 Weight (with accessories) (kg): 119 Dimensions (L × W × H) (mm): 1066 x 650 x 920 Included: Hand spray gun: EASY!Force Advanced with Servo Control Length High-pressure hose: 10 m Spray lance: 1050 mm Power nozzle Equipment: Detergent tank: 10 L ANTI!Twist Externally fillable tanks for detergent, limescale protection, and fuel Control panel with illuminated indicator Pressure cut-off Operational reliability: - Easily accessible water filter protects the pump from particles in the water. Fodjw Exdlopfx Ah Eepp - Safety valves, low-water protection, and fuel safety devices ensure the machine's availability. - The soft damping system (SDS) compensates for vibrations and pressure peaks in the high-pressure system. High efficiency: - Eco!efficiency mode – economical and environmentally friendly, even during longer use. - Reduces fuel consumption and CO₂ emissions by 20 percent. Detergent dosing: - Precise detergent dosing with rinse function. - Large tank opening with filler spout. Mobility concept: - Jogging principle with large, rubber-tired wheels and a swivel caster. - Integrated tipping tray for effortless transport over steps. - Push handles for easy transport and maneuverability. Simple controls: - Intuitive operation with a large one-button selector switch.

Condition: excellent (used), Year of construction: 2022, Wobarg 1700 Automatic Stacker / Strapping Machine 2022 – Industrial Packaging & Strapping Machine Manufacturer: Wobarg Maskinkonstruktion ApS, Denmark Type: Automatic Stacker / Strapping Machine Year: 2022 Machine number: 1700 Control system: Siemens SIMATIC HMI Fpedpfxj Afangj Ah Eop Compressed air: 6 bar Frequency: 50 Hz The machine features an integrated conveyor system, adjustable product guides, pneumatic handling components, motor-driven mechanisms, and a Siemens SIMATIC touchscreen control panel. The system is enclosed by transparent safety guarding with access doors and emergency-stop controls. Automatic stacking and strapping configuration Siemens SIMATIC HMI operator panel Integrated motor-driven conveyor belt Adjustable product positioning and guiding Pneumatic handling system Industrial electric motor and gearbox Strapping material reel holder Safety enclosure with transparent panel The machine is available for inspection. Operating condition, production capacity, and suitability for specific products should be verified before purchase. Manufacturer & Machine Identification: Wobarg, Wobarg Maskinkonstruktion, Wobarg Maskinkonstruktion ApS, Wobarg Stacker, Wobarg Strapping Machine, Wobarg Stacker Strapping Machine, Wobarg 1700, Wobarg 2022, Cyklop, Cyklop packaging, automatic stacker, automatic strapping machine, industrial stacker, automatic stacking machine, stacking and strapping machine, automated packaging equipment, Siemens SIMATIC HMI. English – Packaging & Strapping Machinery: Automatic strapping machine, industrial strapping machine, automatic strapper, automatic stacking machine, stacker strapper, stacking and strapping system, automatic bundling machine, industrial bundling machine, bundle strapping machine, product stacking machine, automatic product stacker, packaging line equipment, automated packaging line, end-of-line packaging, end-of-line automation, packaging automation, industrial packaging machinery, automatic packaging system, conveyor strapping machine, inline strapping machine, automatic banding machine, PP strapping machine, plastic strap machine, automatic product handling, industrial conveyor system, production line automation, secondary packaging equipment, bundle packaging machine, product grouping machine, packaging conveyor, stacking conveyor, industrial handling equipment. English – Food Industry & Processing: Food industry equipment, food processing equipment, food packaging machinery, industrial food packaging, food production line, food packaging automation, food handling equipment, automated food packaging line, food factory equipment, food processing plant machinery, secondary food packaging, food product stacking, food product bundling, food industry conveyor, food production automation, frozen food packaging equipment, chilled product handling, industrial food handling, food packaging line equipment, food factory automation, packaging machinery for food manufacturers. English – Dry Ice Industry: Dry ice production equipment, dry ice packaging equipment, dry ice packaging line, dry ice block handling, dry ice block stacking, dry ice block strapping, dry ice production line, dry ice processing equipment, dry ice factory machinery, CO2 dry ice production, dry ice block production, dry ice industrial equipment, dry ice handling equipment, dry ice production automation, dry ice packaging automation, dry ice block bundling.

Condition: like new (used), Very well-preserved, almost as-new KÄLIN grinding/planing machine. Year of manufacture 2009/2010, Type Caster IPC 6.000. The machine is in excellent condition and comes complete with all motors and accessories for the production of up to a maximum of 6 tons/hour of grinding wood. The system includes a Siemens S7 control, grinding equipment and grinder type SL 800, along with all planer heads and a set of spare cutter heads. Extraction system and complete conveying technology for chip transport are included. The machine has been professionally dismantled and is ready for immediate pickup. Storage location: Southern Germany. Inspection is possible at any time. Fpjdpfsykmlmsx Ah Eep Sale by customer order.

Condition: new, machine/vehicle number: 1.161-070.0, working width: 510 mm, area performance: 2,805 m²/h, warranty duration: 24 months, water tank capacity: 70 l, noise level: 66 dB, battery capacity: 105 Ah, Technical specifications: Condition - NEW! Catalog number: 1.161-070.0 Drive type: Battery (not included in the set) Drive: Traction motor Brush working width (mm): 510 Vacuum working width (mm): 900 Fresh/dirty water tank capacity (l): 70 / 75 Theoretical area performance (m²/h): 2805 Brush speed (rpm): 180 Brush contact pressure (g/cm² / kg): 13 / 20 Water consumption (l/min): max. 2.3 Sound pressure level (dB(A)): 66 Gross weight (kg): 345 Weight without accessories (kg): 100 Dimensions (L × W × H) (mm): 1310 × 590 × 1060 Scope of delivery and equipment: The set includes NO batteries and NO charger Squeegee 900mm V-shaped with oil-resistant polyurethane rubbers Disc brush 510mm red - medium-hard Fsdpfx Ahsxnzuie Ejpp Features: Powerful drive Automatic water stop Solenoid valve 2-tank system The option of a machine ready to work with batteries and charger is available in our other listings. Advantages: - Self-explanatory symbols and a clear control panel. Short training phases. Easy handling thanks to a few yellow-coded controls. - Robust construction with integrated disc brush head. High area performance thanks to the large working width. Brushes are changed via pedal ejection. - Particularly maneuverable machine. Good overview of the surfaces to be cleaned. Easy transport. Key features: - Thanks to its slim and compact design, our battery-powered ride-on scrubber-dryer BD 50/70 R Bp Pack Classic with disc brush technology is extremely easy to maneuver and transport – even in elevators, for example. This positions the affordable entry-level model as a viable alternative to walk-behind scrubbers.

Condition: used, mileage: 115,049 km, power: 110 kW (149.56 HP), first registration: 05/2008, fuel type: diesel, overall weight: 3,500 kg, color: blue, gearing type: automatic, emission class: euro4, number of seats: 6, Year of construction: 2008, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Vehicle number (for inquiries): 170 Mercedes-Benz Sprinter 315 MAXI MIXTO 1st owner. Service booklet available. Paint code: * 5389 Paint color Steel Blue MB 5389 Interior: * VG2 Fabric Brasao black Equipment: * 219L Hamburg * 5389 Paint color Steel Blue MB 5389 * A50 Front axle with increased load capacity * AR2 Axle ratio I = 3.923 * BB3 Electronic Stability Program (ESP®) * C42 Stabilizer bar, rear axle, under frame * C45 Stabilizer bar, front axle, reinforced * C906 - * CE1 Suspension for roll stabilization * CL1 Steering wheel adjustable in inclination and height * D03 High roof * D93 Omission of partition * E43 Trailer socket, 13-pin * EE8 Battery 12V 100Ah * EL8 Two-way speakers front * EN0 Radio Sound 5 * ES0 Jump start connection * F66 Lockable glove compartment * F68 Exterior mirrors, heated and electrically adjustable * FF5 Storage compartment above windshield * FJ1 Folding cover for storage compartment * FK3 Radiator grille, chrome-plated * FKA Box van * G40 Automatic transmission * H12 Auxiliary hot-air heater * H21 Heat-insulating glass all around with band filter on windshield * IL1 Domestic (Germany) * IR6 Wheelbase 4325 mm, overhang 1615 mm * IT4 3.5-ton vehicle * J10 Speedometer km/h * JW6 Service interval display ASSYST * KD6 Exhaust monitoring for nitrogen oxide (NOx) * KL1 Fuel level sensor for auxiliary heater * L Left-hand drive * L63 Ceiling light in cargo area * L94 Omission of parking lights * LB1 Side marker lights * LB5 3rd brake light * LD0 Roof control panel with 2 reading spotlights * M49 Generator 14V/180A * MC3 Engine OM 646 DE 22 LA 110 kW (150 hp) 3800/min * MS1 Cruise control * MS9 Engine design Euro IV * QA8 Trailer coupling for increased trailer load 2.8/3.0 t * QA9 Step on rear door with trailer coupling * R65 Spare wheel carrier under frame end * R87 Spare wheel * RF9 Tire brand Goodyear (90) * RH2 Tires 235/65 R16 C * RM0 All-season tires * RS3 Steel wheels 6.5 J x 16 * S22 Armrest for driver's seat, ISO-fix (child seat attachment system) * S23 Passenger seat, two-seater * S78 Grab handle for interior seat for two-seater * S87 Driver's seat box, low * SA5 Airbag, driver * SB3 Driver's seat, suspension seat * T16 Sliding door, right * T86 Entry handle on rear right corner pillar * U65 Upholstery passenger compartment, 3-seater bench, 1st row * V40 Floor, combination vehicle * V43 Wooden floor Fpodpfx Aho Aiyxnj Eep * V85 Smoker's package * VA3 Interior panelling in cargo area up to roof height, washable * VG2 Fabric Brasao black * W16 Window front left, fixed in side wall/sliding door * W17 Window front right, fixed in side wall/sliding door * W54 Rear door, two-wing, 270 degrees * W70 Tinted glass in rear, black * WM4 Control code factory * WM9 Control code factory * WV0 Control code factory * WV5 Control code factory * WW7 Control code factory * X30 Vehicle registration certificate part 2 * XU1 Signage/printed material, German * XZ0 Model generation 0, year of modification 2010 * Y10 First-aid kit * Y43 Jack, hydraulic * Y44 Warning triangle * Z41 Approval as truck * ZM0 Box van PART EXCHANGE AND FINANCING POSSIBLE. You can find more vehicles on our homepage:

Condition: new, Year of construction: 2026, operating hours: 4 h, functionality: fully functional, power: 11 kW (14.96 HP), overall weight: 1,000 kg, total length: 1,750 mm, total width: 1,100 mm, total height: 1,640 mm, working width: 510 mm, input voltage: 400 V, control cabinet height: 200 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, number of blades: 12, rotational speed (max.): 100 rpm, rotor diameter: 260 mm, rotor width: 510 mm, sieve perforation: 15 mm, type of input current: AC, warranty duration: 12 months, Equipment: documentation/manual, Hacker shredders, wood chippers, and grinders – MHR510 ecoline The MHR ecoline series comprises robust and energy-efficient wood shredding machines designed for reliable continuous operation in commercial environments. These plug-and-play shredders offer high performance, low energy consumption, and excellent value for money. This makes these chippers ideal for craft businesses, recycling companies, and woodworking businesses seeking an economical and powerful solution. The machines are manufactured in our factory in Germany and sold directly. Fedpfx Ao Air Hcoh Ejpp Advantages: - Continuous, consistent shredding process - High performance with low energy consumption - Robust construction - Larger feed opening - Excellent value for money - Plug-and-play (5-pole CEE plug, 400V, 32A three-phase) - Siemens PLC controlled - MHR510 ecoline Rößler shredders – “Made in Germany”

Condition: excellent (used), Complete factory for the production of furniture cabinets, composed by: KZ2207) “BIESSE” FDT - CN Drilling and Dowels Inserting Line, composed by: Loader "RBO" Tornado, 2 x CN Multi-Borers "BIESSE" FDT, 1 x CN Multi-borer and dowels inserter "BIESSE" SDT CN, Stacker "RBO" Tornado KZ2205) 4-sides Sizing and Edge Banding LINE "HOMAG", composta da Double-station portal Loader "ESSE2", 1st Double-side Sizing and Edge banding machine "HOMAG" PowerLine KF 20/20/QA/15, Turning station at 90° "HOMAG" TD 31/30/12, 2nd Double-side Sizing and Edge banding machine "HOMAG" PowerLine KF 20/21/QA/35, 2nd Turning station at 90° "ESSE2", Double-station portal Stacker "ESSE2" KZ2210) 'BREMA (BIESSE)' Mod. Vektor CNC-LINE for Drilling-Routering-Inserting: Fpedpfx Ash T Dvteh Esp Hedgehog (18 positions), CNC Vektor GLR 30-13, Vektor XL 40-30, Idrak-3, various Transfers KZ2090) Sander (Veneer Sanding machine) "COSTA LEVIGATRICE" SN TR TT TT TR 1350 KZ2045) Gantry-CNC with edge banding unit "MORBIDELLI" Planet HP6018 (2 Tables, 6 reels) KZ2033) Edge bander "HOMAG" KAL 310 with Loader-feeder "ESSE2" KZ2075) Furniture assembling LINE "TERMOPAK" with carcasse press (through-feed) KZ2203) Sawing LINE "SALVADOR" (panels cross-cutter + splitter) with Loader "ESSE2" KZ2009) VENEER Department (double-knife guillotine "MONGUZZI", cross-cut shear "MONGUZZI"; splicing machine "KUPER", guillotine shear "TAGLIABUE", ecc) KZ2201) Short-cycle Pressing LINE "WEMHONER" useful size mm 1300x6200 KZ2215) Automatic panels storage System "ESSE2" Mod. MAGAZZINO N° 3 Saw-dust Filtering Stations "MION" (1st of Kw 132, 2nd of Kw 55, 3rd of Kw 22) Various vehicles (truck, van, etc.) And many other machines (i.e. CNC "BIESSE" Skipper 130, small multi-borers "VITAP" and MORBIDELLI", circular saws, etc.), rollers ways, shelvings, fork-lift, transpallets, etc. Machines still installed at the end-user's factory. They can be inspected by appointment.

Condition: new, Year of construction: 2026, operating hours: 4 h, functionality: fully functional, power: 15 kW (20.39 HP), overall weight: 1,200 kg, total length: 1,750 mm, total width: 1,200 mm, total height: 1,640 mm, working width: 630 mm, input voltage: 400 V, control cabinet height: 200 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, number of blades: 15, rotational speed (max.): 100 rpm, rotor diameter: 260 mm, rotor width: 630 mm, sieve perforation: 15 mm, type of input current: AC, warranty duration: 12 months, Equipment: documentation/manual, Hacker wood chipper, shredder, MHR630 ecoline The MHR ecoline series comprises robust and energy-efficient wood chipping machines designed for reliable continuous operation in commercial environments. These plug-and-play shredders offer high performance, low energy consumption, and excellent value for money. This makes them ideally suited for craft businesses, recycling companies, and wood processing companies seeking an economical and high-performance solution. The machines are manufactured and directly distributed from our factory in Germany. Fpodpfj Air H Djx Ah Ejp Advantages: - Continuous, uniform shredding process - High performance with low energy consumption - Includes Ecorings (for different types of wood) - Robust construction - Larger feed opening - Excellent value for money - Plug-and-play (5-pole CEE plug, 400V, 32A three-phase current) - Siemens PLC controlled - MHR630 ecoline_Ecorings Rößler waste material shredder, "Made in Germany"

Year of construction: 2019, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 52, Weight: 8,500 kg; Power: 142 kW; Voltage / Frequency: 380 V / 50 Hz; Current: 64 A; Compressed air: 6 bar; CE certification: Yes; Condition: Used, in good working order. Description: Fpedpjz Eap Rjfx Ah Eep For sale: an Italian industrial machine, ANGELI ARE 1.0, year 2019. The machine has a CE certificate and is fully functional. Technical specifications: total weight 8,500 kg, electrical power supply 380V / 50 Hz / 142 kW / 64A, working pressure of compressed air 6 bar. Factory number: 52. The machine is used, well-maintained, and in good technical condition. It is ready for inspection, on-site testing, and immediate loading. If interested, I can send additional photos and videos of the machine in operation. We can assist with loading.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, total height: 4,500 mm, total width: 7,200 mm, total length: 8,500 mm, temperature: 35 °C, energy consumption: 300 kWh, Equipment: documentation/manual, For sale are three unused heat pump vacuum evaporators from Blue Water Plants, manufactured in 2020. The units were delivered for concentrate thickening at a biogas plant in southern France, were preserved at the factory, and have never been operated productively. The evaporators can be purchased individually or as a package. Scope of delivery: 1x Main evaporator, distillate output approx. 55 m³/day 2x Evaporator Type 12,000, distillate output each approx. 12 m³/day Total capacity in combination: up to approx. 79 m³/day Operating principle: The evaporators operate under vacuum at a low boiling temperature. An integrated heat pump recovers the evaporation heat, which is why the energy requirement is significantly lower than with conventional thermal evaporation. The wastewater is separated into two streams: a distillate with low residual load and a thickened concentrate with a greatly reduced volume. An integrated acid reaction binds ammonia as an ammonium sulfate solution. This solution can be used as a liquid nitrogen fertilizer. Typical applications: Biogas plants: Treatment of fermentation residue and digestate, recovery of nitrogen as ammonium sulfate fertilizer, reduction of storage and application volume Composting and waste treatment plants: Thickening of leachate from storage areas and composting processes Agriculture: Volume reduction of slurry and storage basin water, nutrient recovery Food and beverage industry: Thickening of organically contaminated process wastewater, for example from dairies, breweries or juice and vegetable processing Fodpfx Aoyr H Anoh Ejpp Concentrate treatment: Further thickening of concentrates from reverse osmosis or membrane filtration with organic and nitrogenous loads Reduce disposal costs: Instead of disposing of the entire wastewater externally, only the thickened concentrate is now disposed of. The distillate can be reused or discharged after further treatment. Not suitable for: The evaporators are designed for organically and ammonium-contaminated wastewater. They are not intended for saline water such as seawater, brine, drilling fluids, reservoir water or heavily chloride-contaminated industrial wastewater. High salt and chloride loads lead to crystallization and scale formation on the heat exchanger surfaces and increase the risk of corrosion. For such applications, RIEFILT offers suitable alternatives on request. Note on distillate quality: Depending on the inflow, the distillate may contain residual levels of ammonium and COD. For discharge or reuse, RIEFILT offers suitable post-treatment via reverse osmosis. Peripherals (optional): Acid module 20 m³ (H2SO4), pH reactors, adiabatic cooling tower 47 m³/h Documentation: Process flow diagram incl. tank, pump and dosing list, technical documents and CE conformity declarations. Photos available on request. Conditions: Sale exclusively through RIEFILT GmbH. EXW South France, FCA/DAP on request. Inspection by appointment. Price on request.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, total width: 910 mm, total length: 1,550 mm, total height: 1,700 mm, type of input current: AC, input voltage: 230 V, overall weight: 240 kg, input frequency: 50 Hz, Zoller smile 400 CNC – Tool presetting machine, year of manufacture 2013 Year of manufacture 2013 · Measuring electronics 2022 · ZOLLER-calibrated 09/2024 Tool measuring and presetting machine ZOLLER smile 400 in CNC version with drives in Z, X and C and image processing pilot 3.0, year of manufacture 2013. No basic equipment: High-precision spindle SK 50 with 0.002 mm runout, autofocus, rotary encoder ROD and "3D scan" with 3D contour data output are optional ZOLLER features, subject to an extra charge. The measuring electronics were replaced with a new ZOLLER IPC in 2022; in September 2024, the ZOLLER service department serviced and calibrated the machine – status is good. The previous owner is not a tool manufacturer, but a manufacturer of precision clamping devices: the machine was located in the demonstration area next to a Walter Mini Power with automation and was only used for demonstrations – once a week to once a month. Complete with control unit cockpit-pilot, label printer and complete ZOLLER documentation. WHAT MAKES THIS MACHINE STAND OUT - Options included: CNC, high-precision spindle SK 50, autofocus, rotary encoder and "3D scan" are optional ZOLLER features that incur an extra charge when new – installed on this machine and included in the price. - CNC in Z, X and C: the machine automatically moves to the cutting edge and executes measuring programs automatically – many smile machines on the market are manual. - High-precision spindle SK 50: runout 0.002 mm, spindle brake, locking at 4 × 90° (ZOLLER option – installed, included in the price). - Autofocus and rotary encoder ROD: the cutting edge is automatically brought into focus, the angular position is precisely detected – results independent of the operator (ZOLLER options – installed, included in the price). - "3D scan" with 3D contour data output: 3D tool model as STEP, STL, DXF or XML for simulation and collision checking in CAM – rarely found on a used machine. EQUIPMENT - High-precision spindle SK 50 (0.002 mm) - Autofocus - Rotary encoder ROD - "3D scan" + 3D contour data output - Measuring computer ZOLLER IPC 2022 Fpodpfx Ahs Ah Ikve Eep - pilot 3.0 - Control unit cockpit-pilot - Label printer SCOPE OF DELIVERY - Presetting and measuring machine ZOLLER smile 400 CNC with high-precision spindle SK 50, autofocus and rotary encoder - Control unit cockpit-pilot with measuring computer ZOLLER IPC (2022), monitor, keyboard and mouse - Thermal label printer - Software pilot 3.0 with "3D scan" and 3D contour data output - Adapter SK 50 / SK 40 according to factory delivery note 2013 – will be confirmed during inspection - Documentation: operating manual smile / pilot 3.0 (DE), factory delivery note with equipment 2013, ZOLLER calibration certificate and quality checklist 2024 - Tools are not part of the scope of delivery AVAILABILITY AND INSPECTION Availability: in stock in Velten from 11/12/2026. Inspection and demonstration under power in Velten by appointment; further photos and video on request. TRANSACTION Location: 16727 Velten near Berlin (Germany) · FCA Velten including loading · 100% advance payment · Delivery 1–2 working days after payment receipt · All technical data are in the attached data sheet. Technical data according to manufacturer's documents and enclosed operating manual (information, no agreement on the condition within the meaning of §§ 434, 443 BGB). We confirm individual values during the inspection or upon specific request. Subject to errors, technical change

Condition: used, Year of construction: 2022, sheet length: 3040sheet thickness: 13,0total power requirements: 30weight approx.: 13,4messurements (LxWxH): 3850 x 2300 x 2260CNC Guillotine Shear DENER AS 3013 – Young Machine Ex Works – including loading onto truck For sale is a very young CNC guillotine shear DENER  AS 3013. The machine is in very good condition and is being sold due to a factory closure. The price already includes: - Loading onto truck - Immediate availability by arrangement (Location St. Pölten)  The machine can be inspected  by prior appointment. If you are interested or have any questions, please do not hesitate to contact us. Fjdpfx Aezw Rv Ush Ejpp Technical Data Sheet thickness: 13 mm Cutting length: 3,040 mm Cutting angle: 0.5–3° Number of hold-downs: 16 Back gauge: 1,000 mm, CNC-controlled Motor power: 30 kW Cutting speed (0.5–3°): 17–8 cuts/min Throat depth: 350 mm Oil tank: 400 litres Length: 3,850 mm Width: 2,350 / 3,270 mm Height: 2,260 mm Weight: 13,400 kg Equipment- Swing beam design - CNC control for:- Back gauge - Cutting angle - Cutting gap - Cutting length - Ball screws for the back gauge - Ball transfers in the table - 2 × support arms, 1,000 mm - Cutting line illumination - Foldable finger guard up to 1,000 mm Including pneumatic sheet metal support system!

Condition: used, functionality: fully functional, machine/vehicle number: W09405208WGR05653, mileage: 239,777 km, first registration: 12/1998, fuel type: diesel, empty load weight: 3,820 kg, maximum load weight: 7,490 kg, axle configuration: 2 axles, wheelbase: 4,750 mm, color: white, number of seats: 3, total length: 6,820 mm, total width: 2,550 mm, total height: 2,510 mm, permissible axle load (axle 1): 3,000 kg, permissible axle load (axle 2): 5,000 kg, Year of construction: 1998, Equipment: truck registration, The vehicle is suitable for a maximum speed of 90 km/h. It is equipped with a factory-installed 60-liter fuel tank. A yellow warning light is installed and certified on the roof. Fsdpfx Ahs Agfghj Eepp Price: €11,950.00 + VAT.

Condition: reconditioned (used), Year of construction: 1985, Hacker, factory-refurbished in 2023 for €7,500. Motor: 22 kW Equipped with 49 impact blades Throughput: 300 - 1500 kg/hour Screen hole size: 25 mm Operating hours: 7738 Infeed hopper: 90 x 90 cm With an additional hopper on top, measuring 1 x 1 m, total height: 265 cm. Fpedpfo Agw U Nex Ah Eop

Condition: new, machine/vehicle number: 1.127-001.0, working width: 510 mm, area performance: 2,040 m²/h, overall weight: 139 kg, warranty duration: 24 months, water tank capacity: 50 l, Technical specifications: Condition - NEW! Catalog number: 1.127-001.0 Drive type: Battery (not included in the set) Drive: Propulsion by brush rotation Brush working width (mm): 510 Vacuum working width (mm): 900 Fresh/dirty water tank capacity (l): 50 / 50 Theoretical area coverage (m²/h): 2040 Brush speed (rpm): 180 Brush contact pressure (g/cm² / kg): 27.3 – 28.5 / 20 – 23 Fsdsxnyl Hopfx Ah Espp Water consumption (l/min): max. 2.3 Sound pressure level (dB(A)): 66 Color: anthracite Total weight with water (kg): 139 Weight without accessories (kg): 40 Dimensions (L × W × H) (mm): 1170 × 570 × 1025 Scope of delivery and features: The set does NOT include batteries or a charger. V-shaped 900mm suction bar with oil-resistant polyurethane rubber. Disc brush 430mm red - medium-hard. Features: 2-tank system. The option of a machine ready to work with batteries and a charger is available in our other listings. Advantages: - Self-explanatory symbols and a clear control panel. Solenoid valve for automatic water stop after releasing the deadman's switch. The machine is easy to operate thanks to a small number of yellow-coded controls. - Very maneuverable and easy to handle. Excellent visibility of the area to be cleaned. - Designed for daily use. Robust, durable, and reliable device.

Condition: excellent (used), Year of construction: 2018, operating hours: 3,843 h, functionality: fully functional, machine/vehicle number: 320000620, turning length: 1,240 mm, turning diameter over cross slide: 480 mm, turning diameter: 480 mm, spindle motor power: 33,000 W, spindle speed (max.): 3,250 rpm, spindle bore: 115 mm, travel distance X-axis: 307 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 1,240 mm, mount diameter: 315 mm, rotational speed (max.): 3,250 rpm, rotational speed (min.): 20 rpm, torque: 630 Nm, bar passage: 102 mm, workpiece weight (max.): 150 kg, feed rate X-axis: 30 m/min, feed rate Y-axis: 22 m/min, feed rate Z-axis: 36 m/min, total height: 2,150 mm, total length: 4,800 mm, chuck outer diameter: 315 mm, total width: 2,100 mm, collet bore: 102 mm, bar diameter (max.): 102 mm, quill stroke: 120 mm, quill diameter: 100 mm, quill travel distance: 1,200 mm, swing diameter over cross slide: 480 mm, spindle nose: A2-8, swing diameter over bed slide: 700 mm, overall weight: 7,200 kg, spindle diameter: 140 mm, tool length: 250 mm, feed force X-axis: 7,000 N, feed force Y-axis: 7,000 N, feed force Z-axis: 11,000 N, turning diameter over bed slide: 700 mm, Equipment: rotational speed infinitely variable, For Sale: DMG MORI CLX 550 CNC Lathe (Model 2018) High-performance 4-axis turning center in excellent condition, ideal for heavy-duty and precision machining. Equipped with key factory options for maximum efficiency and versatility. Control System & Software: CNC Control: DMG MORI SLIMline® 19" Touch Control with Siemens 840D sl Operate Software Option: Integrated DXF Reader for fast, direct import and programming of 2D CAD files Key Technical Specifications & Features: Year of Manufacture: 2018 Control Unit: 4-Axis Configuration Bar Passage / Capacity: Extended Ø 102 mm passage option Spindle Speed: Up to 3,250 rpm Spindle Torque: 630 Nm (40% ED) Turning Capacity: Max. turning diameter Ø 480 mm | Max. turning length 1,240 mm | Swing over bed Ø 700 mm Tailstock Setup: Includes base and hydraulic interface preparation for steady rest Included Accessories & Tooling Package: Tool Setter (Automatic tool measuring probe) Part Catcher & Bar Puller Bar Feeder Interface / Preparation Fpedpfx Ao Agvvgsh Eep Driven Tooling Included: 1x Angular Driven Tool Holder (90°) 4x Straight Driven Tool Holders Collet Chucks: 2x ER32 & 2x ER40 Clean, well-maintained machine ready for immediate production.

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 49063, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Siemens, controller model: 840D SL, overall weight: 12,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 69,700 h, For sale is a highly productive, horizontal 4-axis CNC machining center, type Heller H 4000, manufactured in 2008. The machine comes from a factory closure and is characterized by extreme stability, high precision, and maximum reliability in series and single-part production. It is fully functional and can be inspected while powered on, by arrangement. Equipment: - Horizontal spindle - Pallet changer with rotary table - Siemens 840D SL control system - Additional 4-position rotary table Keppler SN: M4.4906301 (each with a rotary table) - Chip conveyor Knoll 600K-1 - Fine chip removal - Coolant/lubricant treatment system with strip filter - Chain magazine with 160 tool positions HSK 63 Accessories: - Workbench (8 drawers) - Telescopic drawer cabinet - Shelf Contents: Hand tools, various analog and digital measuring instruments, machine accessories Attractive offer – flexible & worry-free We offer not only a high-quality product but also customized financing options that can be tailored to your needs. Whether it's a down payment, installment payment, or individual financing models – together we will find the right solution. If desired, we will also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so that you don't have to worry about anything. 📞 Please contact us for more information or a non-binding offer. We will provide you with personal and competent advice. Fpjdpj Afva Eefx Ah Esp Subject to prior sale, changes and errors!

Year of construction: 2026, condition: like new (used), functionality: fully functional, machine/vehicle number: E31VK2608, This is the latest generation of the Vario Cooking Center, the iVario Pro XL with a 150-liter capacity, manufactured in 08/2026 and featuring Balanced Power from the premium manufacturer Rational (successor to the VCC 311). This unit is a like-new demonstration model that was only used for cooking demonstrations. The device has a sophisticated electronic control system with various cooking processes and extremely fast heating performance, making it versatile. The unit will be supplied including plastic feet. The iVario Pro XL is available relatively soon. The full Rational factory warranty is valid until 07/2028!!! A LIMITED NUMBER OF UNITS ARE AVAILABLE. The basic equipment is not included in the price and can be purchased for an additional charge. Fpedpj Af Nliefx Ah Eop The images shown are example images; the original photos will follow shortly. Our service for you: 24 months manufacturer's warranty from the manufacturer's date (until 07/2026) High-quality branded devices at fair prices Professional refurbishment / inspection & expert cleaning Checked & fully functional Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 Technical data: W x D x H: approx. 1365 x 894 x 1078 mm Power connection: V: 400 / kW: 34 / Hz: 50 Serial number: E31VK2608 Year of manufacture: 08/2026 Capacity: 150 liters Weight: 245 kg Condition: Well-maintained with signs of use, inspected, fully functional Special features: iCookingSuite - intelligent cooking assistant with 6 operating modes: meat, fish, vegetables and side dishes, egg dishes, milk and desserts, soups and sauces, or 5 cooking processes: boiling, frying, deep-frying, stewing and finishing iZoneControl: flexible division of the pot base into zones with different temperatures. Low-temperature cooking (also overnight), confit, sous-vide cooking. Vario Cooking Control mode: the desired result of the product is selected with a finger tap, e.g. from light to dark. Vario Boost: patented heating system for absolutely even and precise temperature transfer. Programming mode: creation of manual programs and management of cooking processes. Integrated WiFi interface, e.g. for connection to ConnectedCooking. Further information: integrated socket 230 V integrated hand shower with automatic retraction and spray dosage high-quality pot base, seamless with rounded corners core temperature sensor with 6 measuring points 1,200 programs with up to 12 steps each, programmable and nameable integrated hose shower on the unit, integrated water drain in the pot Temperature unit adjustable in °C or °F Tilting cooking pot Lid with integrated water inlet Automatic display of service messages IPX5 spray water protection USB interface for HACCP data output and updates including base cabinet with plastic feet Functions: manual mode (30°C-250°C): adjustment of liquid temperature, adjustment of pot base temperature, adjustment of oil temperature automatic, liter-accurate water filling device Delta-T cooking Auto Lift: lifting and lowering device (baskets for cooking and deep-frying) The deep-frying function is locked but can be unlocked. Subject to changes and errors. You can reach us by telephone during our opening hours: Monday - Friday 09:00 - 13:00 and 14:00 - 17:00.

Condition: ready for operation (used), functionality: fully functional, mileage: 137,540 km, power: 110 kW (149.56 HP), first registration: 05/2015, fuel type: diesel, empty load weight: 3,384 kg, maximum load weight: 4,100 kg, overall weight: 7,490 kg, axle configuration: 4x2, next inspection (TÜV): 09/2027, fuel: diesel, fuel tank capacity: 100 l, brakes: engine braking, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 3, loading space length: 3,400 mm, loading space width: 2,000 mm, Year of construction: 2015, Equipment: power assisted steering, truck registration, Mitsubishi Fuso 7C15, wheelbase 2800 mm Factory-installed, hydraulically operated winch, dimensions 3400x2000x400 Immediately ready for use Sold on behalf of the customer Weidmann & Wortmann OHG, Mitsubishi dealer for 37 years Fpedpfx Ahs Ah Hiye Esp Mr. Wortmann will be happy to answer any questions you may have.

Condition: reconditioned (used), functionality: fully functional, power: 110 kW (149.56 HP), Equipment: documentation/manual, Complete refurbished Amandus Kahl C35-780 pellet press production line Complete production line featuring a fully refurbished Amandus Kahl C35-780 pellet press. The Amandus Kahl C35-780 pellet press has recently undergone a complete overhaul at the Amandus Kahl factory. All documentation for the newly replaced parts is available. An overview of these parts can also be found among the photos. The production line consists of: - Amandus Kahl C35-780 pellet press - New 110 kW electric motor on the pellet press - Electrical control cabinet with emergency stop, including complete electrical documentation - Conveyor belt - Screening and cooling system that screens the pellets and cools them automatically - Hydraulic nut - Roller head in perfect condition - Including electrical wiring - Feed screw that transports the material to the pellet press - Automatic dosing system that measures the amount of pellets for filling, for example, a big bag - 4 extra dies with 6 mm holes - 60 liters of extra synthetic oil Fpedps Agk Rijfx Ah Ejp Overview of the parts replaced during the overhaul: - 7 new bearings - 2 new wear rings - 1 new air filter - 2 new oil seals - 1 new oil filter - 1 new oil pump - 20 liters of synthetic oil 800/460 - 1 new pressure piece for the main shaft Do you have any questions or would you like to inspect the complete production line? Please feel free to contact me. Sincerely, Danny van Tol Inventtol B.V.

Condition: ready for operation (used), functionality: fully functional, turning length: 630 mm, center height: 270 mm, center height in crank: 138 mm, metric thread pitch (max.): 10 mm, metric thread pitch (min.): 25 mm, turning diameter over cross slide: 250 mm, turning diameter over bed slide: 250 mm, turning diameter: 250 mm, total width: 2,975 mm, center width: 900 mm, disc diameter: 250 mm, total height: 1,100 mm, total length: 2,750 mm, clamping diameter: 250 mm, cone mount: 5 mm, rotational speed (min.): 28 rpm, spindle motor power: 4,000 W, swing diameter over cross slide: 250 mm, swing diameter over bed slide: 250 mm, pivoting range: 360 °, quill diameter: 80 mm, quill stroke: 16 mm, quill travel distance: 32 mm, rotational speed (max.): 450 rpm, Equipment: documentation/manual, rotational speed infinitely variable, Relieve Turning Lathe NILES DH 250/4 (Specialized relieving and profiling lathe) The NILES DH 250/4 is a precision relieve turning lathe designed for the efficient execution of profile turning, relieving, and finishing operations on cylindrical parts up to 250 mm diameter. Manufactured by NILES, a reputable German machine tool builder, this machine combines rigid mechanical construction with smooth motion control to deliver consistent results in demanding workshop environments. This machine is ideally suited for toolrooms, repair shops, and manufacturing facilities where relief turning of tools and components is required. Its sturdy built-in relieving device ensures high accuracy and repeatability for profiling tasks, including operations that cannot be performed easily on standard lathes. The faceplate diameter of 250 mm accommodates a wide range of workpieces up to 250 mm in turning diameter, with a turning length of 630 mm. Workpieces are securely positioned on the well-designed center system, featuring a center height of 270 mm over bed parallels and a center width of 900 mm. The machine’s removable chuck plate and Morse taper No. 5 mount provide flexibility for different holding and tooling options. Fpedox Sq H Sspfx Ah Eep The lathe’s spindle offers an infinitely variable speed range from 28 to 450 rpm, driven by a robust 4 kW spindle motor, allowing precise speed selection for both rough and finish relieving cuts. The built-in quill is 80 mm in diameter with a maximum stroke of 16 mm, enabling controlled profiling movements. The NILES DH 250/4 is supported by its factory documentation, making it straightforward to integrate into industrial workflows and maintenance routines. The overall construction — approximately 2750 mm in length, 2975 mm in width, and 1100 mm in height — reflects its stable and durable design. Key Features: *Relief turning lathe for specialized profiling operations *Maximum turning diameter: 250 mm *Turning length up to 630 mm *Faceplate diameter: 250 mm *Center height: 270 mm *Infinitely variable spindle speed: 28 – 450 rpm *Spindle drive power: 4 kW *Quill diameter: 80 mm, stroke 16 mm *Morse taper No. 5 spindle mount *Heavy industrial construction with factory documentation Typical Applications: *Relieving and profiling cylindrical components *Tool relief turning and finish profiling *Small series specialized machining *Maintenance and toolroom work