Used Feeding Technology for sale (32,983)

Condition: new, Year of construction: 2025, functionality: fully functional, cutting height (max.): 1,300 mm, cutting width (max.): 1,300 mm, overall weight: 9,000 kg, workpiece weight (max.): 8,000 kg, saw drive: 11,000 W, The OBS1300 bundle cutting saw has been developed to optimize production in terms of time and efficiency when formatting material to the desired length. The presented machine is available immediately—viewings are welcome. Technical specifications: • Maximum bundle dimensions (width/height): 1300 x 1300 mm • Minimum bundle dimensions (width/height): 800 x 800 mm (hydraulic clamp operating limit—smaller bundles can also be cut) • Additional equipment enables cutting bundles with a minimum length of 600 mm • Maximum cut-off bundle length: 3000 mm • Maximum feed bundle length: 6000 mm • Maximum bundle weight: 8,000 kg Iodpfx Afjxn Rt Ujfstr • Cutting accuracy: +/- 2 mm • Dedicated guide lubrication unit • GB TITANIUM cutting guide (rigid and robust, milled from a single steel block. Backward compatible with STHIL guides*) • STHIL RM404 cutting chain • 11 kW WEG guide drive motor • Fast measurement system with absolute encoder (retains position memory after power loss) and 0.2 mm positioning accuracy • Innovative strapping unit with intelligent system determining strapping point based on preset cut lengths • System of three sets of hydraulic clamps • Hydraulic system built using PONAR components • Crosswise infeed conveyor for loading bundles onto the machine • Intelligent unloading system with crosswise chain conveyor • Two pairs of tilting rollers (hydraulic) allowing large offcuts to freely fall onto the conveyor • TA DRIVE geared motors • HIWIN linear guides with increased load capacity • YHY Japan bearings • YASKAWA inverters and servomotor • 21-inch touchscreen operator panel • SIEMENS PLC controller (with remote access system) • Safety system and SICK brand sensors Warranty: 12-month warranty. Service response time: 24 hours. Spare parts and consumables warehouse. Machine supplied with: • Operating manual • Declarations of conformity • Warranty card • Electrical diagrams • Hydraulic diagrams

Year of construction: 2014, condition: used, This listing is for a Freestead Technology WFI Storage Vessel Control panel. The unit is in full working condition and is ready for immediate release. Itjdpoxv A Srjfx Affsr This Unit was installed new in 2015 by Freestead Process Technology. A control panel designed and built for WFI system

Year of construction: 2024, operating hours: 35 h, condition: like new (used), functionality: fully functional, For sale a used, fully functional ACT-400 Load Bank/Loadbank from AGG Power Technology, in operation since March 2025. Technical Specifications: Voltage: 3-phase four-wire, AC400V, 50/60Hz Isdpfx Afexvmxpsfstr Maximum power: 510 kW Resistive load in 11 steps, freely combinable: 1 kW, 2 kW, 2 kW, 5 kW, 10 kW, 20 kW, 20 kW, 50 kW, 100 kW, 100 kW, 200 kW Power factor: 1 Deviation from setpoint: ±5% Communication: RS232 / RS485, Modbus-compatible Cooling: Forced air Operating environment: -20℃ to +55℃ Duty cycle: Continuous Serial number: 2407034 CE / ISO 8528-06 / GB/T 2820.5-2009 certified Notes: Installed outdoors, total operating hours approx. 15,815 kWh Available for pickup/shipping from December 2025 Palletizing possible, buyer arranges transport Price negotiable Location: Czech Republic

Year of construction: 2022, condition: new, LCT bio. X A 100 Biologically based small parts cleaner including 80 liters LCT Bio Liquid cleaning fluid Bag filter Magnet for separating metal chips Washable prefilter Cleaning temperature is a comfortable 41 ° C Environmentally friendly Long service life of the cleaner little space required additional options are possible: Itsdpjffhnlofx Affjr Filter housing with washable nylon filter Insert sheet made of V2A to protect the plastic surface Trolley

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, conveyor belt length: 2,000 mm, conveyor belt width: 4,000 mm, Length 200 cm Width 40 cm Conveyor belt with metal detector, also for non-ferrous metals and aluminum Sensitivity adjustment of metal detection Itjdjww Id Eepfx Affor

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total height: 3,000 mm, total length: 8,880 mm, total width: 4,000 mm, volume flow: 38,000 m³/h, type of input current: three-phase, workpiece weight (max.): 80 kg, compressed air connection: 8 bar, suction capacity: 38,000 m³/h, load capacity: 80 kg, heating capacity: 340 kW (462.27 HP), Equipment: cabin, lighting, For sale is a brand new wet painting line. Internal dimensions of the cabin 8880x4000x3000mm. Overhead conveyor of products with a length of 41m. Pitch of swivel hinges 400mm. Load capacity 80kg/m. Production speed maximum 4m/min. Large door to the cabin 2000x2500mm (possibility of painting large parts). Ventilation exhaust unit 38,000m3/min. Paint preparation room including membrane pump 01D140. Application electrostatic gun. Gas heating 340kW. Isdpfx Aewmm U Uoffstr

Condition: new, Year of construction: 2024, operating hours: 1 h, functionality: fully functional, Eddy Current separators from the Magnetic Series are mainly used in the waste recycling industry. The use of eddy currents allows for the recovery of non-ferrous (non-magnetic) metals from loose waste such as aluminum, copper, brass etc. The WPS separators are characterized by high separation accuracy due to the original solutions by ZŁOMIARZE, which guarantees high profitability of waste recycling. Wps separators are used in the recovery of: non-ferrous metals from the recycling of electronic waste non-ferrous metals from car recycling metals from foundry waste aluminum in glass recycling processes non-ferrous metals from steel waste non-ferrous metals from municipal waste Description of Operation: The material delivered by the vibratory feeder is placed on the conveyor belt of the eddy current separator. The separator belt transports the material toward the high-speed magnetic rotor. The magnetic rotor creates high-frequency magnetic field by using maximized system of alternating magnetic fields. The alternating magnetic field induces eddy currents in metals. These currents counteract the external field and lead to the rejection of colored metals outside the material stream. A divider installed at the end of the separator is provided for the separation of materials. The central magnetic rotor has been designed to handle the smallest materials, providing the ability to recover particles up to 1 mm in diameter. Ijdpju Dg Uhjfx Affstr We also have larger sizes of eddy current separators - catalog in documents.

Year of construction: 2024, condition: new, Drum for Doppstadt screener SM 518 and SM 620 on stock. CHECK AVAILABLE PERFORATIONS. Isdpofi Tqbefx Affetr We manufacture and provide drums for mobile and stationary screeners, for : - Doppstadt SM 414 - Doppstadt SM 518 - Doppstadt SM 618 - Doppstadt SM 620 - Doppstadt SM 718 - Doppstadt SM 720 - Doppstadt SM 725 also Terra Select, Eggersmann, Pronar, Komptech , Mc Closkey... Bespoke maded drums are our specjality.. In case of any question, please contact me by mobile or e-mail.

Condition: good (used), 1 x Advanced Food Technology mobile sandwich cutting machine. This machine automatically cuts sandwiches into halves and ensures a clean and centred cut on all types of sandwiches. Serial number - 0190802. Belt width - 150mm. Overall length - 2300mm. Electrical supply - 415 V / 50 hz / 3 phase. Air supply - 60 PSI / 4 Bar. Itsdpjudncdsfx Affer

Year of construction: 2021, condition: as good as new (ex-display), The brush washbasin LCT bio.x C100 is the proven classic in a new design and with optimized equipment technology. It impresses with its extraordinary stability and load-bearing capacity. The spacious work surface enables barrier-free and comfortable working. - stable construction - particularly low-maintenance - high load capacity - Energy-saving mode for downtimes such as nights or weekends - A flexible articulated hose allows easy rinsing of the parts - Optimum cleaning performance by heating the cleaner to 41 °C The workpieces are rinsed off through a nozzle. With With the help of the flexible articulated hose, the nozzle in the desired position can be fixed. The cleaning brush supports the cleaning strongly dirty parts. The large cleaning surface enables effective cleaning To work. High carrying capacity of the washer due to stable device construction. Device is made of plastic and is therefore very stable and corrosion-free. Easy to transport using a lift truck. Multi-stage filter system, consisting of coarse screen, fine screen and magnet. In addition, a washable filter bag holds (fineness: 100 μm) finest impurities back before they get into the bathroom. A functional control with soft-touch control panel guaranteed by choosing the energy saving mode Energy savings of approx. 50%. All electronic components of the device are in one compact technical unit. Our LCT bio.x C100 can be used with the following label-free cleaners be driven LCT BioLiquid LCT Bio Liquid Special LCT Bio Liquid Power: Itsdjh S Undspfx Affor LCT coconut cleaner LCT Coconut Cleaner Alu LCT Coconut Cleaner low-foaming

Condition: good (used), Year of construction: 2001, functionality: fully functional, Cleaning Centrifuge Machine type: SA100-B55-1 Year of manufacture: 2001 Rotor speed: 2,980 rpm Rotor diameter: 365 mm Maximum sludge compartment capacity: 2–8 kg Weight: 525 kg Motor power: 5.5 kW Operating voltage: 5.5 kW Itedpfew Ewyrex Affjr The machine was serviced regularly and was connected to a parts washing machine in a paint shop.

Condition: new, functionality: fully functional, Equipment: CE marking, fume extraction, safety light barrier, Eckert Diamond Infinity – Fiber Laser for Precise Laser Cutting in Industrial Sheet Metal Processing The Diamond Infinity laser cutting system from Eckert impresses with its powerful fiber laser technology, high cutting quality, and efficient material usage – ideal for metalworking. The modern CNC control with a large touchscreen allows for easy operation and full control over all cutting processes. Application Areas: Mechanical engineering, steel construction, contract manufacturing Technical Highlights: ✔ High-precision laser cutting even with copper & brass ✔ Energy-efficient fiber laser with optional linear drives ✔ Fully automatable loading/unloading process possible ✔ Service & support in Germany Itodpfx Afowqc R Tsfer ➡ Discover the Diamond Infinity now at Machineseeker – your solution for efficient CNC sheet metal processing.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Technical Data Summary (No Marketing Spiel): This is a used automatic in-line Solder Paste Printer, Model P4034 from Shenzhen ETA Technology Co., Ltd, manufactured in 2018. The machine is in excellent functional condition. Key Performance Parameters: ● Repeat positioning accuracy: ±0.01mm. ● Printing accuracy: ±0.025mm. Iedpfxexm S N Us Affetr ● Max PCB size: 400×340mm. ● Min PCB size: 50×50mm. ● Max Stencil Frame size: 737×737mm. ● Cycle time (excluding print/clean):

Year of construction: 2024, condition: new, We manufacture and provide drums for mobile and stationary screeners, for : - Eggersmann T 40 - Terra Select T 4 Isdpfxofkm Dfj Affjtr - EggersmannT 50 - Terra Select T 5 - Eggersmann T 55 - Terra Select T 6 - Eggersmann T 60 - Terra Select T 7 - Eggersmann T 70 - Eggersmann T 80 also Doppstadt, Pronar, Komptech , Mc Closkey... Bespoke maded drums are our specjality. In case of any question, please contact me by mobile or e-mail..

Year of construction: 2024, condition: new, ZIGZAG air separators Application description: Iodpfeua D Aljx Affetr ZIGZAG type air separator is a device designed to purify materials in the waste recycling process. The separator separates light fractions from heavy fractions by pneumatic method. It works well with a wide range of waste materials of 0-150mm size. Air separators of this type are used for pre-ground, jagged or very fine materials. Thanks to our unique design, the separator has the ability to adjust at many points that are important for the purity of the received fractions. ZIGZAG type separators are used in many areas: weight classification of metal granules purification of shredded scrap from the light fraction (films, plastics, paper) removal of volatile fraction during recycling of WEEE purification of plastics, rubber purification of municipal waste, glass removal of dust Construction description: The ZIGZAG separator consists of individual components mounted on a common support structure. In the first part, the ZIGZAG module is installed. The module has an inspection hole and regulation of the material stream passage gap. In the second part there is a cyclone discharging the light fraction. Underneath the cyclone there is a variable speed sluice for ejection of separated materials. A fan with electronic speed control is located on top of the structure. The structure is designed in part for loading and unloading by conveyor belts. The separator has a control cabinet equipped with a safety system.

Condition: used, This listing is for the Envair Technology B102 Microbiological Safety Cabinet + Stand The unit is in full working condition and is ready for immediate use Overview: Envair Technology Bio 2 Essential (B102 Series) Certifications & Intended Use Fully compliant with BS EN 12469:2000, ensuring reliable biosafety standards. Envair Technology Suitable for handling biological agents up to ACDP Hazard Group 3, provided proper laboratory siting. Ideal for cell culture and related work. Envair Technology Design & Construction Width: 1200 mm. External body: Constructed from white polyester-coated mild steel. Work zone: Lined in 304-grade stainless steel with side-glazed panels. Work surface: Removable and dished, crafted from 316-grade stainless steel. Envair Technology Airflow & Filtration Offers recirculating or ducted configurations. Equipped with downflow HEPA filtration (Class H-14, ≥ 99.995% efficiency) according to EN 1822‑1 standards. Lighting & Fans Iedpfx Afsxhfpkefjtr Illuminated using low-energy LED lighting mounted external to the work area. Ventilation is powered by independent EC-type energy-efficient fans, both above and below the working zone. Envair Technology Control Interface Features an integrated positive-touch membrane control panel positioned above the work area, with animated display feedback. Comprehensive IQ/OQ documentation for validation. Envair Technology Compliance & Standards In addition to BS EN 12469:2000 and HEPA filter standards, the Bio 2 Essential cabinets also meet: IEC 61010‑1:2010 Air quality standards: ISO Class 5 (BS EN ISO 14644‑1:2015) and EU GMP Grade A.

Condition: new, Year of construction: 2025, functionality: fully functional, working range: 6,500 mm, type of input current: three-phase, total width: 1,629 mm, total height: 2,525 mm, total length: 10,500 mm, table length: 6,500 mm, overall weight: 3,500 kg, pipe diameter (max.): 220 mm, power: 15 kW (20.39 HP), laser power: 6,000 W, warranty duration: 24 months, Equipment: cooling unit, safety light barrier, PFEIFER technology skyTUBE Pro 6500 X3 – Profile & Tube Laser Center 6500 x 15 – 160 mm Format skytube-pro-6500×3 Profile and Tube Laser Fiber Laser Metal Cutting – fast material change with up to 6kW, delivering effective performance for your production, is the smart and efficient tube laser processing solution. Capable of laser cutting round tubes, square tubes, rectangular tubes, open profiles, and special profiles, this laser machine ensures maximum productivity during production changeovers. Task: Fiber laser up to 6kW for a wide range of metalworking applications! Unrivaled Laser Cutting Performance High axis speeds and accelerations, combined with a robust mechanical structure, ensure outstanding cutting performance and precision. The tube and profile laser processing machine for production offers a compact footprint – simply smart! Ingenious solutions, 100% made in Saxony! Tubes and profiles from 15 x 15 to 160 x 160 mm – 3D cutting with efficient fiber laser technology. The semi-automatic 6-position profile-tube loading chain system allows fast job changes. With the optional bundle loader, you work independently. Bevel Cutting A revolutionary feature. With the ability of our machines to swivel their cutting head up to 50° on an additional fifth axis, we provide the solution to one of the biggest challenges in modern profile processing. If the laser beam always strikes the tube at a right angle, you end up with an elliptical cut edge. With the capability to swivel the tube laser cutting head, together with the feed axis, completely angled cuts are now possible. Of course, when working with the skyTUBE Laser, safety comes first! The skyTUBE Pro is a Class 1 laser system. There is no risk of contact with laser emissions or reflections during operation. For all our laser systems, nothing is more important than complete safety and compliance with the highest standards and directives. Technical Specifications: · Closed industrial housing, Class 1 laser (optionally Class 4) · Working area, tube cutting system/chuck: Round tubes 15–160 mm, rectangular tubes 15 x 15 – 110 mm · Working area on the tube: X 6500 mm, Y ±100 mm, Z 150 mm, A ±360°, U ±50° · Automatic material feed: up to 6 x 160 mm profiles, lengths 3500–7000 mm · Automated material unloading system for profile sections, construction adjusted to profile length · Z drive: ball screw axis system / with PTI SVZ system · X/Y drive: linear axis system / with PTI AC-SERVO system · Productive cutting speed: depending on material and laser combination, up to 50 m/min / 1.4G · Software resolution: up to 2500 DPI · Repeatability: ± 0.03 mm · Max. footprint dimensions (LxWxH): 11,600 mm x 2,830 mm x 2,100 mm + unloading system according to profile section length Itsdpfx Afjrh Iw Tofer

Year of construction: 2020, condition: new, The Sapphire is the optimum solution for heavy industry for material thicknesses up to 200 mm. It enjoys great popularity with various production companies - often in three-shift operations - and all areas of application where stability, efficiency and process reliability are particularly important. Thanks to the high-quality equipment, the system is a universal tool for the highest demands and a helpful instrument for process optimization. Used in more than 400 industrial plants worldwide, the Sapphire cutting system proves itself every day. Equipment - Harris oxy-fuel burner - Kjellberg plasma torch with e-touch - Kjellberg Q 3000 plasma power source with automatic gas console - Crosshair laser pointer for easier positioning - CamConcept Finest Cut V 7 - Suction table 3000 x 6000 mm - Suction unit PFC 6 incl. suction pipes - Delivery, installation and commissioning Main features - High dynamics and precision in automated 2D & 3D cutting of sheets, tubes and profiles - Sheet metal processing up to a material thickness of 200mm - Extensive cutting database for ideal user-friendliness Iodpfx Ajf Ak N Rsffetr - Designed for highest demands under the most difficult conditions in three-shift operation General technical data Drive: Servo AC Available working widths: 2.000-7.000 mm Available working lengths: from 1.500 mm positioning speed: 25,000 mm/min cutting thickness: up to 200 mm Cutting quality: DIN-EN ISO 9013 Positioning accuracy

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: AD082, Offered is a microwave unit from Fricke und Mallah Microwave Technology GmbH, manufactured in 2010. The machine is currently not in use. It is up to date with the latest safety standards and ready for operation. Isdpfx Afexcnkasfetr An inspection of the machine is possible upon request and by appointment. We are available for any further questions you may have.

Year of construction: 2024, condition: new, We manufacture and provide drums for mobile and stationary screeners, for : Pronar MPB 18.47 Pronar MPB 20.55 Itedofkm Dpspfx Affer Pronar MPB 20.72 also Terra Select, Eggersmann, Doppstadt, Komptech , Mc Closkey... Bespoke maded drums are our specjality. In case of any question, please contact me by mobile or e-mail.

Year of construction: 2024, condition: new, WPS Eddy Current Separator, Magnetic Series. Eddy Current separators from the Magnetic Series are mainly used in the waste recycling industry. The use of eddy currents allows for the recovery of non-ferrous (non-magnetic) metals from loose waste such as aluminium, copper, brass etc. The WPS separators are characterized by high separation accuracy due to the original solutions by ZŁOMIARZE, which guarantees high profitability of waste recycling. WPS Separators are used in the recovery of: • non-ferrous metals from the recycling of electronic waste • non-ferrous metals from car recycling • metals from foundry waste • aluminium in glass recycling processes • non-ferrous metals from steel waste • non-ferrous metals from municipal waste To ensure the longevity of the equipment, the ZŁOMIARZE, as one of few companies, has introduced an improvement in the form of the central cooling of the bearings of the magnetic rotor, thanks to which the service life of the machine has been extended even several times. Technical Specification: • Magnetic field source – NdFeB magnets Ijdpfx Afjiqxtbsfstr • Smooth adjustment of magnetic rotor speed – 0-3000 rpm • Belt speed adjustment • Belt position control system • Magnetic rotor cleaning cleats • Belt cleaning scraper • Material divider adjustable in two levels • Bearing cooling system (greatly extends bearing life) • Control panel with safety check For our non-ferrous metal separator we offer additional devices to make you separation process easier: • vibratory feeder • belt conveyors • magnetic drum/belt separators For more information please download our catalog. If you're interested in our products, please contact us!

Condition: new, The Topaz plasma cutting machine is an advanced solution that is perfect for manufacturing operations where precision, efficiency and compact design are important. It offers reliability and high cutting quality and thus perfectly meets the requirements of modern companies. Main features: - Innovative technology solutions: Developed in cooperation with ECKERT and TEKA, offer modern functions and high performance. - Exceptional quality and reliability The machine is manufactured in Germany with components from well-known manufacturers, which ensures exceptional precision, durability and reliability. Thanks to the robust manufacturing according to demanding standards, the operating costs of the system are reduced to a minimum. Itodovmg N Hjpfx Affsr - Intuitive user interface: The machine's clear and easy-to-use control system speeds up work and increases the operator's productivity. - Excellent cutting quality: Thanks to the plasma systems from leading manufacturers such as Hypertherm and Kjellberg, the machine offers the best cutting quality. - The TEKA filter system: Provides clean air, which is especially important in small operations where space saving and air quality are crucial. During periods when the machine is not working, the system can act as an extraction system for welding or grinding work, eliminating the need for additional systems and reducing costs.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2023, operating hours: 300 h, Equipment: CE marking, Diamond Vector – Fiber Laser for Precise and Efficient Laser Cutting Isdpfxowqdbas Affetr The Eckert Diamond Vector is a modern fiber laser cutting machine designed for the highest demands in industrial sheet metal processing. With its powerful CNC control and an intelligent extraction system, it enables precise cuts, short cycle times, and a clean working environment – ideal for mechanical engineering, steel processing, and contract manufacturing. Highlights of the laser cutting system: ✔ Precise laser cutting – even for copper & stainless steel ✔ Energy-efficient fiber laser for economical operation ✔ Intuitive touchscreen control ✔ Robust construction & low maintenance ✔ Service and technical support directly in Germany ✔ Immediately available – no delivery time! ➡ Inquire now on Maschinensucher and take your production to the next level with the Diamond Vector fiber laser!

Condition: new, Opal WaterJet Combo is the only machine in the world that combines the advantages of ultra-fast plasma cutting technology and the accuracy of waterjet cutting. The synergy of the possibilities offered by both technologies allows you to take full advantage of all the benefits. Thanks to its universal application and extensive equipment options, the Opal WaterJet Combo has proven itself in both large factories and small operations. Main features - Innovative, patented use of water jet and plasma technologies - Enables fully automatic cutting with both cutting methods - Up to 10 times the cutting speed of conventional water jet systems - Reduction of production costs of up to 70%. - Universal tool for cutting all types of material - Possibility of using the ProX 3D cutting head - Flexible use of the preferred cutting technologies during cutting for the respective component - Optional cutting with pure water or abrasive General technical data Itedpef Ak Ugsfx Affsr Drives: Servo AC Available working widths: 1.000 - 6.000 mm Available working lengths: 1.000 - 12.000 mm Material thickness - Water jet 2D: 0.5 - 250 mm - Water jet 3D: 0.5 - 150 mm - Plasma: depending on plasma source Quality plasma sheaths: DIN-EN ISO 9013 positioning speed: 20,000 mm/min Positioning accuracy: DIN-EN 28206 Security module: DIN-EN 13850 El

Condition: new, Due to its dynamics and efficiency, the Jantar is the most frequently chosen model of Eckert machines. It is used by large industrial companies and medium-sized businesses looking for both an economical and reliable solution. The Jantar plasma cutting machine can be equipped with a plasma and oxyfuel cutting system and a wide range of accessories. (marking, drilling and machining of tubes and profiles). The design of the machine has been optimized over the years for maximum reliability, as confirmed by hundreds of customers throughout Europe. Main features -attractive price of a very well equipped basic version -Highly dynamic and precise cutting of 2D applications, tubes and profiles -cutting capacity from 0,5mm to 100mm material thickness -Comprehensive database with predefined cutting parameters -Possibility to optionally extend the length of the working area Technical data Drive Servo AC Available working widths 1.500, 2.000, 2.500, 3.000 mm Available working length Any length from 1.500 mm positioning speed 25,000 mm/min Itsdjf Alb Ajpfx Affjr cutting thickness up to 100 mm Cutting quality DIN-EN ISO 9013 Positioning accuracy DIN-EN 28206 Repeat accuracy DIN-EN 28206 Electrical systems DIN-EN 81346 Safety module DIN-EN 13850 Working height 740-760 mm Working - ambient temperature + 5 °C to 45 °C Working - Humidity max. 90%