Used Feeding System for sale (10,775)

Condition: excellent (used), TECHNICAL DATA - Shaft width: 500 mm - Number of knives: 4 pcs - Max thickness of the processed workpiece: 230 mm From above: - Pawls - Serrated, driven, sequential infeed roller - Pressure units - Planing shaft - Pressure unit - Smooth, driven outfeed roller From below: - Adjustable driving rollers in the lower table: 2 pcs - Motor: 5.5 kW - Electrically operated table lift - Table lift motor: 0.37 kW - Infinitely variable feed speed regulation - Extraction nozzle diameter: 150 mm - Dimensions (LxWxH): 1000x1000x1350 mm - Weight: 690 kg Chedeqv Aivopfx Ab Tof ADVANTAGES – Electric table lifting – 4-knife shaft – Driving rollers in the lower table – Used thicknesser, in very good condition Net price: 16,900 PLN Net price: 4,020 EUR at a 4.2 EUR exchange rate (Prices may vary with exchange rate fluctuations)

Condition: used, Year of construction: 2006, Documented equipment / components: Cedpfxsxb Ukko Ab Tshf Year Equipment / Component 2006 Bead Apex machine with flipper – AFC1 2006 Bead Apex machine with flipper – AFC2 2011 Bead Apex flipper machine – AFC3 2012 Installation / commissioning AFC3 Line setup: • AFC (Automatic Feeding & Control) • Conveyor line • Drum applier • Loop conveyor • Extruder Control system: Operator panels with visualization units

Condition: used, Year of construction: 1992, Perfect binding line Müller Martini Year: 1992 Consisting of Book block feeder ITM Gathering machine Müller Martini 210-E Description: - Hand feeding station Cedpox Dkkljfx Ab Tshf - Number of gathering stations: 18 - Pump(s) - Set up element - Criss cross delivery - Book block feeder: 3606 - Transfer into the binder Perfect binder Müller Martini 3006 /30 Z Hour counter: +/- 14.700 Description: - Number of clamps: 30 - Main milling station - Roughening station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Cold glue spine gluing, interchangeable - Intermediate drying station (infrared): IRT - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: Probag - Base for side glue system - Hotmelt side glue unit, interchangeable - Gauzing station - Stream cover feeder - Scoring station - Pump(s) - 1st nipping and pressing station - HF High Frequency dryer - 2nd nipping and pressing station - Lay down device (to the left) Transport system Müller Martini Three knife trimmer Kolbus HD 150.B Year: 2005 Description: - Right hand infeed - Automatic hopper feeder for inline production - Cut counter - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2

Condition: excellent (used), CATALOGUE NUMBER 6114 TECHNICAL DATA - Feed hopper inlet: 800x1000 mm Chsdpfx Ajgnzd Esb Tef - Rotor working width: 800 mm - Pump motor: 0.75 kW - Main motor: 15 kW - Number of knives: 21 pcs - Knife size: 30x30 mm - Screen: 0.8x10 mm - Pressure drawer - Electric auto-reverse - Discharge augers: 2×1.1 kW - Dimensions (L/W/H): 2460x1800x2250 mm - Weight: 1660 kg – German-made – Auto-reverse – Pressure drawer – Not painted – In very good condition – Used shredder Net price: 63,900 PLN Net price: 15,200 EUR depending on the exchange rate, 4.2 EUR (Prices may vary with significant exchange rate fluctuations)

Condition: used, Year of construction: 1971, Documented modifications / upgrades: Year Modification / Upgrade 1971 Installation of four-roll calender 18" × 54" (Comerio) 1971 Safety enhancements for CTI – SQ 1986 Manual gauge monitoring system 1990 Width measuring unit 1993 Upgrade to eliminate internal blistering 1994 Modification of calender for single turn 2001 Upgrade MMI-Gum-Calender Y2000 2009 Cassette winders (2) incl. control cabinets 2009 Material width measuring system (SQ1) 2010 Overhaul gum calender (SQ-Cal.) 2012 Control system adaptation feed extruder SQ-calender 2012 Mechanical upgrade SQ-calender 2012 Gauge measurement system SQ-calender 2013 Overhaul of cooling line for gum calender (SQ-Cal.) 2014 Optimization of spool winder at SQ-calender 2018 New calender rolls Csdpfx Ajxf Ap Nob Tjhf Control system: Various modernizations (MMI 2001, control upgrade 2012) Technical data: Roll diameter 18", roll length 54" Maintenance / condition: Regular overhauls and modernizations documented 1971–2018 Accessories / options: Cassette winders, width measuring unit, cooling line, spool winder, gauge & width measuring systems

Condition: used, Year of construction: 2007, Perfect binding line Wohlenberg City E-6000 (edition 6000) Year: 2007 Consisting of Book block feeder Solema 6353 Gathering machine Wohlenberg Sprinter E Description: - Hand feeding station - Number of gathering stations: 16 Csdpfx Abox Dki Uj Tohf - Optical sheet control: WST - Opticontrol OSC 1-1 - Excluding pump(s) - Set up element - Criss cross delivery - Transfer into the binder Perfect binder Wohlenberg City E-6000 (edition 6000) Description: - TFT touch screen - Number of clamps: 15 - Milling and roughening station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Front cutter: VSS - Hotmelt spine glue unit with integrated pre-melter - Hotmelt side glue unit with integrated pre-melter - PUR spine gluing unit - Rotary cover feeder - Scoring station - First nipping and pressing station - Second nipping and pressing station - Lay down device (to the left) Transport system Description: - Transport system, length (approx): 50 mtr - Escape delivery Three knife trimmer Müller Martini Merit S Year: 1997 Description: - Right hand infeed - Automatic hopper feeder for inline production - Sets of knives: 2 - Exchangeable cutting tables (standard set): 4-17 Book stacker Rima RS-3310S Year: 2007 - Delivery to the right Shrink wrapping machine BVM BMS 6030 W With shrink tunnel

Condition: excellent (used), CATALOG NUMBER 6950 TECHNICAL DATA - Maximum workpiece width: 220 mm Chodpjlikzfofx Ab Tof - Maximum workpiece height: 130 mm – 4 spindles: 1) Horizontal bottom, 220 mm, 5.5 kW 2) Vertical right, 130 mm 3) Vertical left, 130 mm; (spindles 2 and 3) 5.5 kW 4) Horizontal top, 220 mm, 5.5 kW - 4 electrically adjustable spindles (up/down) - All spindles adjustable up/down, right/left - Spindle diameter: 40 mm - 4 upper infeed drive rollers, gear-driven, including 1 double roller - 1 double upper outfeed drive roller, rubber-coated - Lower outfeed drive roller, rubber-coated - Feed via Cardan shaft rollers - Infinitely variable feed speed: 6–22 m/min - Feed motor: 2.2 kW - Lifting motor: 0.55 kW - Electric planing thickness adjustment - Infeed table length: 1970 mm - Central lubrication system - Extraction port diameter: 3x120 mm, 140 mm - Enclosed in cabin - Dimensions (LxWxH): 3350 x 1400 x 1400 mm - Weight: 1700 kg – German-made – Unpainted – Used planer, very good condition Net price: 38,900 PLN Net price: 9,260 EUR Net price calculated at exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7612 Technical specifications: Chsdpfx Abov Ubmis Tjf - Max. workpiece width: 1030 mm - Max. workpiece height: 150 mm From above: - Metal pressure roller - Split metal pressure roller - Unit (profiled rubber calibrating roller + pad + metal roller) - Smooth rubber idler roller From below: - Infeed roller - Feed belt - Outfeed idler roller - Pneumatically oscillating belts with photocells - Electric table height adjustment - 2 feed rates - Main motor: 11 kW - Brake - Handwheel for precise sanding height adjustment - Feed motor: 0.33 kW - Table lifting motor: 0.12 kW - Operating pressure: 8 bar - Extraction port diameter: 150 mm - Dimensions (L/W/H): 1500 x 1750 x 2000 mm - Weight: 965 kg ADVANTAGES - German made - Original paint - Used sander in very good condition Net price: 28,900 PLN Net price: 6,880 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (Price may change if there are significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 6909 TECHNICAL DATA - Bandwheel diameter: 800 mm - Band width: 20 mm - Maximum cutting height: 400 mm - Main motor: 4 kW Feed: - Metal, geared, driven roller - Feed roller height: 130 mm - 8 feed speed options: 2.5; 5; 7.5; 9; 12.5; 15; 18; 25 m/min - Motor: 0.4 kW - Table dimensions (L/W): 810x980 mm - Cast iron table, angle adjustable - Guide with 14 metal slide rollers - Throat (band to frame): 780 mm - Brake - Extraction port diameter: 100 mm - Overall dimensions (L/W/H): 1500x1070x2410 mm - Weight: 560 kg Cjdpfx Askyrzpob Tohf – Resaw for lamella production – Equipped with material feed – Brake – Used machine, very good condition Net price: 25,900 PLN Net price: 6,160 EUR Net price calculated at 4.2 PLN/EUR (In case of larger exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalogue number 6393 TECHNICAL DATA - Maximum workpiece width: 200 mm - Maximum workpiece height: 150 mm - Number of spindles: 4: 1) Bottom horizontal, 200 mm, 5.5 kW 2) Right vertical, 150 mm, 4 kW 3) Left vertical, 150 mm, 4 kW 4) Top horizontal, 200 mm, 5.5 kW - All cutterheads adjustable vertically and horizontally - Spindle diameter: 40 mm - Spindle speed: 6,000 rpm From above: - 6 feed-in traction rollers, toothed (including 2 double) - 1 feed-out traction roller, rubber-coated From below: - Feed-in drive roller, toothed, steering, integrated in lower table Chsdpfehh Sfljx Ab Tsf - 3 side pressure rollers - Feed-out traction roller, metal, smooth - All rollers pneumatically loaded - Infeed table length: 2,130 mm - Height-adjustable table - Centralized lubrication system - Electric adjustment of planing thickness - Lift motor: 1.1 kW - Stepless feed speed control via inverter - Feed drive motor: 3 kW - Feed via Cardan shafts - Fully enclosed in cabin - Extraction port diameters: 4 x 130 mm - Dimensions (LxWxH): 3,550 x 1,750 x 1,800 mm - Approx. weight: 3,000 kg ADVANTAGES – Equipped with 4 cutterheads – Ideal for wet and dry timber – DTR operation and maintenance manual included – Used machine, very good condition Net price: 65,900 PLN Net price: 15,690 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7044 TECHNICAL SPECIFICATIONS - Circular saw blade diameter: 250 mm - Blade bore diameter: 30 mm - Number of saw blades: 2 pcs - Minimum cutting width: 30 mm - Maximum cutting width: 150 mm - Maximum cutting height: 35 mm - Minimum workpiece length: 620 mm - 4 upper slip rollers - Upper rollers serve as material hold-down - Bottom feed chain - At the outlet: 1 upper and 1 lower metal slip roller - Stepless feed speed adjustment - Feed motor: 0.75 kW - Main motor: 4 kW - Extraction port diameter: 130 mm - Infeed table dimensions (L/W): 1550x350 mm - Total discharge tray dimensions (L/W/H): 3150x700x870 mm - Overall machine dimensions (L/W/H): 2150x950x2050 mm - Total weight: 350 kg – Very good condition, – Used saw Net price: 7,900 PLN Net price: 1,880 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR Chjdpfx Abemih Sfe Tjf (In case of significant currency fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7069 TECHNICAL DATA - Inlet width: 400mm - Inlet height: 150mm - Shaft width: 450mm - Shaft diameter: 550mm - Number of knives: 2 pcs - 3 toothed feed rollers from the top and bottom, 2×2.2kW - Electric auto-reverse - Reverse mode - Belt conveyor Cedpfom Nb Dvsx Ab Tjhf - Conveyor length: 5100mm - Feed belt width: 400mm - Main motor: 30kW - Chipper dimensions (L/W/H): 2600x1500x1530mm - Overall conveyor dimensions (L/W/H): 5200x560x910mm - Weight approx.: 3000kg – with belt conveyor – electric auto-reverse (adjustable) – reverse mode – used chipper, in very good condition Net price: 68,900 PLN Net price: 16,400 EUR (based on exchange rate 4.2 EUR) (Prices may vary with significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number: 7741 TECHNICAL DATA Inlet width: 400 mm Inlet height: 210 mm Shaft width: 430 mm Shaft diameter: 390 mm Knife length: 430 mm Number of knives: 2 pcs Screen size: 38x24 mm / 27x27 mm Bottom toothed feed roller Cedexcx R Depfx Ab Tohf Lower roller motor: 0.75 kW Upper toothed feed roller Upper roller motor: 0.75 kW Belt feeder Feeder belt length: 1950 mm Feeder belt width: 400 mm Discharge conveyor with adjustable height: 3 kW Conveyor dimensions: 6100x550 mm Total discharge conveyor dimensions: 6550x1850 mm Main motor: 30 kW Auto-reverse (adjustable) Overall dimensions (L/W/H): 3750x1720x1750 mm Weight approx.: 3500 kg – German made – Auto-reverse – Belt feeder – Discharge conveyor with adjustable height (mobile) – Used shredder, in very good condition Net price: 86,900 PLN Net price: 20,690 EUR at an exchange rate of 4.2 EUR (Prices may change due to significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7610 Technical data: - Inlet width: 410mm - Inlet height: 140mm - Shaft width: 430mm - Shaft diameter: 400mm - Number of knives: 2 pcs - Sieve dimension: 80x130mm - Top: single driven, toothed shaft - Bottom: 2 driven, toothed shafts - Infeed belt length: 2850mm - Infeed belt width: 390mm - Autoreverse - Main motor: 30kW - Feed motor: 2×2.2kW - Machine dimensions (L/W/H): 4800x1550x1200mm - Weight: approx. 2200kg Cedpfjv Ubiksx Ab Tjhf ADVANTAGES – Manufactured in Poland – Autoreverse – Equipped with conveyor – DTR technical documentation – Used chipper, very good condition Net price: 75,900 PLN Net price: 18,070 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in the event of major exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7611 Technical specifications: - Inlet dimensions: 460x180mm - Outlet diameter: 300mm - Shaft width: 550mm - Shaft diameter: 350mm - Number of knives: 10 pcs - Knives arranged in 2 rows - Autoreverse function - Knife setting device - Sieve diameter: 30mm - Feeding conveyor from top and bottom - Bottom pull shaft - Feeding conveyor length: 4400mm - Main motor: 37kW - Upper feed motor: 1.5kW - Lower feed motor: 2.2kW - Dimensions (L/W/H): 6100x1150x1000mm - Weight approx: 3500kg ADVANTAGES – German-made – Autoreverse function – Feeding conveyor from top and bottom – Knife setting device – Very good condition – Used shredder Chsdpfx Abjv Ublfj Tef Net price: 98,900 PLN Net price: 23,550 EUR Net price calculated at 4.2 PLN/EUR (Price may change with significant currency fluctuations)

Condition: excellent (used), CATALOGUE NO. 7794 TECHNICAL DATA - inlet width: 530mm - inlet height: 200mm Chjdoxqmrropfx Ab Tof - shaft diameter: 370mm - shaft width: 510mm - knife length: 510mm - number of knives: 2 pcs - auto-reverse – adjustable - screen dimensions: 50x50mm - lower toothed feed roller: 1.5kW - upper toothed feed roller: 1.5kW - main motor power: 30kW - vibrating infeed table / vibrating length: 3900mm - vibrating width: 500mm 1.5kW - discharge conveyor length: 5000mm - belt width: 380mm - waste chute hopper: 2500x3020x2200mm - platform: 4650x750x1770mm - machine dimensions with conveyor and vibrating table (L/W/H): 8900x1200x2550mm - weight: approx. 6000kg ADVANTAGES – adjustable auto-reverse – includes 3900mm vibrating table – includes 5000mm conveyor – German-made – very good condition – used industrial wood chipper Net price: 98,900 PLN Net price: 23,550 EUR (according to 4.2 EUR exchange rate) (Prices subject to change with significant fluctuations)

Condition: excellent (used), Catalogue number: 7551 TECHNICAL DATA Veneer thickness: 0.4–2 mm Passage width under the body: 920 mm Foot pedal control Table dimensions: 1250x340 mm 2 metal pressure rollers Required air pressure: 6 bar Lower rubber feed roller 2 smooth metal feed rollers Motor: 0.55 kW Dimensions (L/W/H): 1400x550x1500 mm Weight: 205 kg Chsdpfx Aevx Rg Hsb Tsf – German-made – Not painted – DTR documentation – Very good condition – Used stapler Net price: 8,500 PLN Net price: 2,020 EUR based on a 4.2 PLN/EUR rate (Prices may change with significant fluctuations)

Condition: excellent (used), Year of construction: 1993, Catalogue number 7718 TECHNICAL DATA Csdpfx Absw I R Tie Tohf - Number of spindles: 23 pcs - Head prepared for screw-in drills - Distance between outermost spindles: 704 mm - Distance between spindles: 32 mm - Pneumatic clamps: 2 pcs - Table surface dimensions: 1200x850 mm - Height to table surface: 930 mm - Feed cylinder stroke: 70 mm - Max drilling diameter: 12 mm - Drilling adjustment vertical/horizontal and at an angle - Drilling unit adjustment pneumatic - Main motor: 2×0.75 kW - Dimensions L/W/H: 1270x1330x1350 mm - Weight: approx. 700 kg ADVANTAGES – Made in Poland – 23 spindles – Head prepared for screw-in drills – Not repainted – DTR technical documentation – Used drilling machine, very good condition Net price: 8900 PLN Net price: 2120 EUR based on exchange rate of 4.2 EUR (Prices may change depending on currency fluctuations)

Condition: excellent (used), CATALOG NUMBER: 7081 TECHNICAL SPECIFICATIONS - JOINTER: - Shaft width: 260 mm - Table length: 1190 mm - Cast iron fence, angle adjustable - Adjustable tables - THICKNESSER: - Max workpiece thickness: 110 mm - Thicknesser shaft guard - From above: - Anti-kickback fingers - Toothed feed roller - Planing shaft - Smooth outfeed roller - Extraction port diameter: 85 mm - CIRCULAR SAW: - Max blade diameter: 160 mm - Cutting height: 25 mm - Blade bore diameter: 30 mm - Blade height adjustable (up/down) - Blade guard - Cutting width with fence: 160 mm - Table dimensions: 710 x 420 mm - SPINDLE MOULDER: - Spindle diameter: 30 mm - Spindle height adjustable (up/down) - Spindle height: 110 mm - Max tool diameter: 190 mm - Fence - Motor approx. 2.2 kW - Dimensions (L/W/H): 1200 x 900 x 800 mm - Weight: 325 kg ADVANTAGES Chsdpfjnabqzox Ab Tef - Compact, takes up little space - Very good condition - Used multifunctional machine Net price: 7,900 PLN Net price: 1,880 EUR (based on 4.2 EUR/PLN exchange rate) (Prices are subject to change due to currency fluctuations)

Condition: excellent (used), Catalogue number 7738 TECHNICAL SPECIFICATIONS SURFACER/JOINTER: - shaft width: 500mm - 4-knife cutterblock - sound-dampening riving knife/comb - shaft guard - adjustable tilting fence - table length: 2200mm - infeed table length: 1180mm - both tables adjustable THICKNESSER/PLANER: - max thicknessing height: 240mm - thicknesser shaft guard *top side: - anti-kickback fingers - feed roller: toothed, spring-loaded - pressure bars - planer cutterblock - pressure bar - outfeed roller: smooth - adjustable roller in lower table - 2 feed speeds: 7/14 m/min - main motor: 5.5kW - electric brake - extraction port diameter: 150mm - dimensions L/W/H: 2300x950x1100mm - weight: 910kg Chedpfx Asxcx Ucjb Tof ADVANTAGES – Italian manufacture – 4-knife shaft – Long tables – Excellent, original condition, never repainted – Used surface planer and thicknesser Net price: 21,900 PLN Net price: 5,200 EUR (exchange rate 4.2 EUR) (Prices may vary depending on exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7291 TECHNICAL DATA Chodpfx Ajrx T E Teb Tof - Infeed width: 500mm - Infeed height: 200mm - Shaft width: 630mm - Knife length: 630mm - Number of knives: 2 pcs - Sieve dimensions: 60x60mm - Lower toothed feed shaft - Lower shaft motor: 4kW - Upper toothed feed shaft - Upper shaft motor: 4kW - Feed belt length: 4100mm - Feed belt width: 400mm - Feeder motor approx. 2kW - Main motor: 55kW - Autoreverse - Feeder dimensions (L/W/H): 4670x760x720mm - Machine dimensions (L/W/H): 2550x1800x1300mm - Weight approx. 4000kg – German-made – Autoreverse – Used chipper, in very good condition Original photos Net price: 118,900 PLN Net price: 28,300 EUR (based on exchange rate of 4.2 EUR) (Prices may vary with significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7026 TECHNICAL DATA - Infeed width: 740mm - Infeed height: 300mm - Shaft width: 780mm - Shaft diameter: 1000mm - Knife length: 780mm - Number of knives: 2 pcs - Screen dimensions: 55x55mm - Bottom: 4 toothed feed rollers - Lower shaft motor: 5.5kW - Top: 3 toothed feed rollers - Upper shaft motor: 5.5kW - Belt conveyor feeder - Length of belt feeder: 4300mm - Width of belt feeder: 600mm - Feeder belt drive motor: 2.2kW - Main motor: 90kW - Reverse - Autoreverse Codjma Hv Dopfx Ab Tshf - Overall machine dimensions (L/W/H): 4600x2350x1700mm - Overall feeder dimensions (L/W/H): 4550x980x970mm - Total weight: approx. 11,000kg – German-made – Autoreverse (adjustable) – Used shredder, in very good condition Net price: 265,900 PLN Net price: 63,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of major currency fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 6875 Chedpfx Abelrvg Ue Tef TECHNICAL DATA - Feed opening width: 720 mm - Feed opening height: 160 mm - Thickness of material to be shredded: 160 mm - Shaft width: 720 mm - Shaft diameter: 600 mm - Knife length: 80 mm - Number of knives: 4×12 pcs - Screen size: 25 mm - Entry pressure feed roller: 0.75 kW - Bottom gear-driven feed roller: 1.8 kW - Top gear-driven feed roller: 1.8 kW - Vibrating chute length: 4470 mm - Vibrating chute width: 710 mm - Vibrating chute motor: 2.2 kW - Main motor: 55 kW - Autoreverse - Extraction nozzle diameter: 260 mm - Vibrating chute dimensions (L/W/H): 4470/950/930 mm - Machine dimensions (L/W/H): 3100/1500/1170 mm - Total weight: approx. 5500 kg – German-made – Very low hours of use – Original documentation - Autoreverse (adjustable) – Used shredder, in very good / excellent condition Net price: 159,900 PLN Net price: 38,070 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 6901 TECHNICAL DATA - max turning length: 1200 mm - max turning diameter: 210 mm - max turning diameter with standard steady rest: 90 mm - max dimension of square material for turning with automatic feed: 100 mm - 3 hydraulic copy attachments - additional 3 tools on hydraulic pistons (2 pieces installed) - 4 spindle speeds - automatic or manual machine operation - spindle motor power: 9 kW - hydraulic pump motor power: 3 kW - extraction nozzle diameter: 90 mm - transport dimensions (L/W/H): 3700x2100x2000 mm - weight: approx. 3000 kg ADVANTAGES – Italian production – automatic hydraulic copy attachment – original technical documentation (DTR) – not repainted – used lathe, in very good condition Chsdpfxekqui Rj Ab Tsf Net price: 63,900 PLN Net price: 15,200 EUR Net price calculated at the rate 4.2 PLN/EUR (In case of significant currency fluctuations, the price may change)

Condition: excellent (used), Catalogue number: 7715 TECHNICAL SPECIFICATIONS - Maximum workpiece width: 220 mm - Maximum workpiece height: 130 mm - 8 spindles: 1) Bottom horizontal 220 mm 5.5 kW 2) Right vertical 130 mm 7.5 kW Codpfow Ipcvjx Ab Tjhf 3) Left vertical 130 mm 7.5 kW 4) Right vertical 130 mm 5.5 kW 5) Top horizontal 220 mm 11 kW – 5th spindle electrically adjustable up/down 6) Bottom horizontal 220 mm 5.5 kW 7) Bottom horizontal 220 mm 5.5 kW – 7th spindle with support + Jointer system (cutterhead sharpening) 8) Universal 220 mm, 360° adjustable, 7.5 kW - All spindles adjustable vertically and laterally - Spindle diameter: 40 mm Feed system (top): - 6 double-toothed infeed rollers, driven, + 1 single roller - 3 double smooth rubber outfeed rollers, driven + 3 single rollers - Digital length counter Feed system (bottom): - Swivelling toothed steel infeed roller integrated into lower table - 3 smooth steel feed rollers - Feed drive via Cardan rollers - Pneumatic pressure rollers - Stepless feed speed adjustment + 2-speed gearbox: 10–60 m/min - Feed motor: 10 kW - Electric thickness adjustment - Body lifting motor: 0.75 kW - Centralised table lubrication - Extraction connection diameters: 5x140 mm, 3x120 mm - Machine dimensions (LxWxH): 4680x1780x1850 mm - Control cabinet dimensions (on pallet): 1020x1000x2230 mm - Weight: approx. 5000 kg ADVANTAGES - Equipped with 8 cutterheads - Universal spindle - Ideal for wet and dry timber - Made in Germany, WEINIG brand - Unpainted (original finish) - Very low operating hours - Used thickness planer, like new Net price: 165,900 PLN Net price: 39,500 EUR (based on exchange rate 4.2 EUR) (Prices may change with significant exchange rate fluctuations)