Used Fasti for sale (90)

Condition: used, Year of construction: 1999, sheet width 3000 mm plate thickness 3 mm 3 support arms Lsdpfx Ader Ngtis Nehb 1 angle stop pneumatic hold-down device Backgauge to be operated by hand

Condition: used, Max. Sheet thickness: 1.25 mm steel Roller center distance: 63 mm Lhedpfx Aohlnv Hsd Njb

Condition: used, Max. bending length: 1020 mm Max. sheet thickness: 2 mm steel Lhsdpfjq T Ud Sox Ad Njb Upper beam can be swung out Bending angle adjustable via potentiometer Lifting height can be preselected via scale Manual and automatic bending mode possible Weight: approx. 650 kg

Condition: used, Max. bending length: 2040 mm Max. sheet thickness: 3 mm steel Bending rail sharpened Weight: approx. 2300 kg Lhedpfoty Rrisx Ad Neb

Condition: used, Year of construction: 1993, Max. cutting length: 4000 mm Max. sheet thickness: 4 mm steel Controlled back stop up to 1,000 mm Side stop and table extensions Cutting length limitation Cutting edge lighting Protective fence, rollable with safety switches Lhedpfx Ajf Nwvfsd Neb Weight: approx. 8500 kg

Condition: used, Max. bending length: 1270 mm Max. sheet thickness: 2.25 mm steel Polished bending rail Manual backgauge 1200 kg Lhjdpjwlp Syjfx Ad Nob

Condition: used, Year of construction: 2000, Max. sheet thickness: 2 mm steel Max. disc diameter: 1000 mm Motorized drive via foot switch Lodpowb Efzefx Ad Nshb

Condition: used, Max. bending length: 1020 mm Max. sheet thickness: 2 mm steel Lhedpfx Aowlp Tqsd Nob Weight: about 500 kg

Condition: used, Max. cutting length: 2040 mm Ledpfx Ajwfqrzjd Nehb Max. sheet thickness: 4 mm steel Controlled back stop up to 1000 mm Side stops and table extensions cutting length limitation Cutting edge lighting knife sharpened Weight approx. 3000 kg

Condition: excellent (used), Fasti hand guillotine shears type 505 - 10 - 2 1060 x 2.0 mm Lhjdpfx Adjwgylas Nsb

Condition: like new (used), Max. Biegelänge: 1020 mm Lsdped Hx Icjfx Ad Nehb Max. Blechstärke: 1,2 mm Stahl

Condition: used, machine/vehicle number: 76271002, sheet width:2040 mm plate thickness:1,2 mm total power requirement:2,5 kW weight of the machine ca.:2,0 t Ljdpfx Adocxxq Ee Nohb dimensions of the machine ca.:3,0 x 1,6 x 1,7 m

Condition: ready for operation (used), Fasti Beading Machine Size 4 150 x 4mm Output Max. Throat 500mm Hydraulic adjustment of the top roller via foot switch Lhsdpfev Tqy Nsx Ad Nob Right/left rotation Continuous speed adjustment via handwheel 60mm Mount Weight approx. 1500kg with accessories Year of manufacture 1963 Space requirement approx. 1000x1000x1750mm

Condition: good (used), Year of construction: 1978, strip width: 200 - 1.500 mm Ledpfjgnc H Dsx Ad Nohb strip thickness: 0,4 - 2 mm coil weight: 7,5 t mandrel Ø: 508/610 mm

Condition: used, Year of construction: 1969, Fasti guillotine shears type 506/10/2.5 Ledpfx Asrhk T Ned Nshb

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Ljdpfohmmfksx Ad Nohb Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition

Year of construction: 1997, condition: ready for operation (used), This SCHRODER-FASTI FASTI 509-40-6 was manufactured in 1997. A Hydraulic shearing machine capable of handling aluminum up to 8mm, steel up to 6mm, and stainless steel up to 3mm. Minimum stop dimension is 15mm. A solid choice for shaping various metals, the SCHRODER-FASTI FASTI 509-40-6 machine we have for sale. Contact us for further details. Additional equipment • Front-operated motorised fence • Right-angled side stop 90° with tilt stop • 2 drop cam stops in T-slot guide • Table extensions with T-slots • Operating tool Machine Benefits Technical Machine Benefits Lodpfx Adsx U T Haj Nehb • Minimum stop dimension: 15 mm • Construction: all-steel welded construction • Cutting technology: / double-edged, multi-part blades with 87° wedge angle / stepless cutting length adjustment / cutting gap adjustment (can be read to 1/100 mm using a dial gauge) / cutting line display with silhouette • Drive: hydraulic with oil filling • Control system: o electric control in accordance with din en 60204-1 / operating modes: single stroke, continuous stroke, partial stroke, jogging • Projection on the side stand: 50 mm • Dimensions (approx. ) for 509-40-6: a (total length): 4540 mm /b (table width): 1885 mm /c (table depth): 1645 mm/ d (cutting length): 4300 mm/ h (height of work surface): 2329 mm /k (total machine height): 1430 mm • Side stand projection: 50 mm (standard) • Foundation fastening: composite anchor hva m16x125 with mortar cartridges (drill Ø 18 mm) / concrete strength class min. B25 required. • Cutting performance: shear angle: large angle = lower resistance, higher performance. / small angle = higher resistance, lower power // max. Sheet thickness: o dependent on material strength (see diagram in document). O recommended strip width: 12-15 × sheet thickness for low-torsion cuts Extra Information Machine still under power

Condition: used, Year of construction: 1980, Technical data: Max. sheet width: 2500 mm Lhodpjtvfzcofx Ad Neb Max. Sheet thickness: 8 mm Weight, approx.: 6400 kg

Condition: excellent (used), Year of construction: 2018, sheet width 1040 mm plate thickness 3.00 mm ST diameter of upper rolls 100 mm side roll diameter 100 mm diameter of lower rolls 100 mm speed 6.0 m/min semi-automatic operated FM 2.1R voltage 400 V total power requirement 2.2 kW weight of the machine ca. 740 kg range L-W-H 2250 x 825 x 1910 mm Very well-kept condition (almost as good as new)! current new price including accessories ~ 28.000 Euro special price on request Start and finish rounding is very easy with this machine thanks to the special concept, the extensive accessories and the robust construction. Machine for for one-off production and series production = extremely universal and economical. Lhodpfjx U Emfsx Ad Njb Equipment: - Robust electro-mechanical three-roll round bending machine - Driven by spur gear brake motor Primary reduction gear - Top roller Side roller electrically driven - Asymmetrical roll arrangement - Manual bottom roll adjustment * with analog position indicator - FASTI control unit "FM 2.1R" * Setting max./min. max./min. travel value side roller - Swing-out top roller, with hinged bearing - Conical bending device - 1x freely movable double foot switch * Right / left rotation of the rollers - Electrical safety device (cable) - original operating instructions

Condition: excellent (used), Year of construction: 2018, plate thickness 2.0 mm throat max. 400 mm Roller center distance min/max 100/120 mm piston stroke max. 20.0 mm turning speeds 3.0 - 15.0 U/min voltage 400 V total power requirement 2.95 kW weight of the machine ca. 385 kg range L-W-H 1200 x 800 x 1200 mm very good condition (almost like new) !!! Equipment: - heavy / robust electro-motorized beading machine - electro-motor drive Lhedpjx U El Uofx Ad Nob - infinitely variable speed adjustment - internal gear brake motor - electro-hydraulic infeed of the top roller - 1x adjustable stop plate - 1x freely movable double foot switch - 2x set of beading/conveyor rollers - original operating instructions

Condition: used, Year of construction: 1970, plate thickness max. 1,5 mm sheet width max. 1.020 mm Year ca. 1970 manual ja ja ja +++++ Ljdpfsx U Daksx Ad Nohb Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, functionality: fully functional, Year of construction: 1981, machine/vehicle number: 3584, FASTI guillotine shear Type: TCHE 25/6 Sheet width: 2500 mm Sheet thickness: 6 mm Back gauge: 750 mm Hold-downs: 16 units Total required power: 12 kW 3x front support arms Lhjdpfx Adoyarwys Njb Foot pedal Dimensions: approx. 3000 x 1500 x 2000 mm Weight: 5400 kg Serial no: 3584

Condition: ready for operation (used), A two-roll plate rolling machine Fasti is available. Roll diameter: 130mm, working width: 2150mm, max. sheet thickness: 3.5mm. Machine dimensions X/Y/Z: approx. 2900mm/650mm/1100mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible. Lhjdpfxjx U Dwvj Ad Nob

Condition: good (used), motorized limit stop behind foot switch Lhsdpfx Adjhtq N Nj Nob Technische Daten / technical details: Schnittleistung (Blechdicke) / max. cutting capacity (thickness of sheet) 6 mm Schnittlänge / max. cutting length 2035 mm Hinteranschlag / arrester behind 1000 mm Ständerweite / distance between columns 2000 Mm Antriebsleistung / drive capacity 11 kW Gewicht der Maschine / weight 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 1985, sheet width 2500 mm plate thickness 6 mm rear stop 750 mm down holder 16 Stk total power requirement 12 kW weight 5400 kg dimensions of the machine ca. 3000 x 1500 x 2000 mm Equipment: - Electric backgauge 750 mm - Pneumatic sheet metal holders - 2x side stops - 3x front support arms Lhjdpfet Sykqsx Ad Njb - Ball rollers in the front support table - Rear sheet metal chute - Foot switch