Used Fast Run for sale (9,445)

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) Nedpfxsyug Hxj Ahvecp • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: new, pressure 20.0 t stroke 185 mm flat steel 200 x 12 mm working feed 10.0 mm/sec return speed 10.0 mm/min work height max. 930 mm table: 480 x 1060 mm total power requirement 2.2 kW motor 400 Volt 50 Hz oil volume 12.0 ltr. weight 530 kg range L-W-H 1150 x 480 x 1400 mm Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting * Programming of 1x bend end point & 1x retract point possible Nedpfx Ajxabtvshvjcp - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual

Condition: new, pressure 40.0 t stroke 285 mm flat steel 250 x 24 mm working feed 10.0 mm/sec return speed 10.0 mm/min work height max. 930 mm table: 660 x 1250 mm total power requirement 4.0 kW motor 400 Volt 50 Hz oil volume 40.0 l weight 800 kg range L-W-H 1450 x 800 x 1300 mm Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting Ncjdpfx Ahsxabhmsvop * * Programming of 1x bend end point & 1x retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual

Condition: new, pressure 80.0 t stroke 285 mm flat steel 300 x 25 mm working feed 10.0 mm/sec return speed 10.0 mm/min work height max. 930 mm table: 750 x 1425 mm total power requirement 10.0 kW motor 400 Volt 50 Hz Njdpoxabhaefx Ahvocp oil volume 120 l weight 1700 kg range L-W-H 1500 x 750 x 1800 mm Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting * * Programming of 1x bend end point & 1x retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual

Year of construction: 2009, condition: good (used), GRUNWALD HITTPAC AKH-059/2 Item: GRUNWALD Hittpac AKH-059/2 Grunwald-Cup Filling Machine diverse, margarine, sous, butter, cheese etc.. Grunwald Rotary cup filling machine with 2 heads, for round cups Year of production: 2009 For hot fill of liquid products including cup lifting device servo driven and hopper with scraper agitator and feed valves (CIP cleanable), aluminum seal dispensing by vacuum and tip sealing, heat sealing of aluminum seal, snap-on cover station and out feed. Nsdpfxsl D T D Te Ahvecp Stainless steel control panel, hanging on the machine with servo controller (make: Elau) and touchscreen operator panel. Machine has polycarbonate glass safety guards. Documentation (instruction, parts manual and electric scheme) in German available CEE machine, incl. complete documentation

Condition: new, Year of construction: 2025, -Smart Safety Clean Air Enhanced Efficiency. Ncodpfx Ajvg U Dxshvsp -Elevate your workplace safety with the TFON Airwet Series — a state-of-the-art wet-type air suction system engineered to eliminate sparks and dust produced during deburring processes. The Airwet Series significantly reduces the risk of fire and explosion, protecting both your workforce and your facility. -Fire & Explosion Prevention: Effectively minimizes hazardous particles and ignition sources right at the source. -Enhanced Air Quality: Captures and removes airborne contaminants, creating a cleaner and healthier work environment Seamless Integration: Compact, space-saving design allows for easy installation into existing machinery and workflows. Increased Safety & Regulatory Compliance: Supports compliance with occupational health and safety standards, boosting overall operational safety

Condition: not inspected (used), functionality: unexamined, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect on time, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Contents: Various boring tools (manufacturer: EPPINGER) Thread cutting heads Arbor press (diameter: approx. 180 mm) MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1550 x 800 x 1500 mm Weight: 450 kg Ncedpfoyn Eg Djx Ahvjp External reference: Pieper - Lot 63

Condition: used, total length: 4,500 mm, total width: 900 mm, total height: 1,650 mm, Empty weight: 3.000 kg Nodpfeyn Abfsx Ahvocp - Documentation available: No - CE certificate present: No - Serial number: 8419012 - Drive system: Conventional - Drive: Mechanical - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 3 - Power [kW]: 7.7 - Max. sheet thickness [mm]: 3 - Max. working width [mm]: 3040 - Top roll diameter [mm]: 150 - Bottom roll diameter [mm]: 150 - Transport dimensions: 4500mm x 900mm x 1650mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2017, condition: used, functionality: fully functional, machine/vehicle number: AU170124-01, APPLICATION AREA UP TO NOW: Positioning/handling of panels from L/W/H 1500mm x 1500mm x 12mm up to L/W/H 8000mm x 2500mm x 80mm EQUIPMENT: Traveling gantry with synchronized drive Vacuum lifter beam with automatically switchable suction rows, adjustable based on the respective workpiece length Schmalz vacuum generator with area suction grippers Clamp cartridges next to the suction cups ensure vacuum activation Z-lift of the suction spider via scissor guides Z-axis asynchronous motor, MoviDrive frequency converter, belt drive Interfaces for upstream and downstream stations Control system: Siemens S7-300 CONTROL CABINET: Power supply, power, and control section with main switch, power supply unit, motor protection switches, automatic circuit breakers, power contactors, auxiliary contactors, Simatic S7-300 control system consisting of a CPU315F-2PN/DP, PN/PN coupler, 1 pc. Micro Memory Card, Ethernet interface, all necessary digital input and output modules, and terminals, fully wired. Fieldbus system: Profinet-Safe. Nsdpfx Aeytphishvscp

Condition: like new (used), Year of construction: 1993, functionality: fully functional, Dowel and slot mortising machine GANNOMAT JUNIOR 320 LBM Very good condition, like new; the machine comes from a very small joinery and was used only very little. The machine is in its original state and has only been cleaned, with no touch-ups to the paint. You can mill slots and drill dowel holes on two levels without having to reclamp the workpiece. 380V, 1500W Speed: 2800 rpm Year of manufacture: 1993 With this machine, you can mill slots, for example for lock cases and similar applications, or make all types of frame dowel joints, at right angles, butt joints, or mitred joints. Ideal for producing dowel joints in timber frame construction, furniture, door, window, and staircase manufacturing, as well as similar applications. By drilling on two levels, using the stops and indexing rails, and due to the machine’s design, dowel joints can be produced in a very short time, which makes the machine highly efficient. Nedpjynv E Rjfx Ahvecp The machine requires a compressed air connection of 6 bar (air consumption is very low). Right-hand rotation. Mills and drills very efficiently and cleanly. Supplied with 2 angle stops (one center stop and one side stop, which can be used on either side), plus a mitre stop. On the front of the machine table, there is a 2000mm long stop rail with 2 flip stops; the stop rail can be shortened or extended if required. Workpiece clamping is done with 2 pneumatic clamping cylinders. Height adjustment between drilling levels is also pneumatic; the pneumatic switch is located at the front of the machine, ensuring rapid adjustment of the index positions and drilling levels. Equipped with a precision 12mm indexing rail, featuring a center index and 12 indices left and right. Can be quickly converted for slot milling; in this mode, the machine can be used without indexing, with 2 adjustable stops left and right, allowing for a maximum working width of 420mm. Maximum drilling hole height: 100mm Maximum drilling depth: 150mm with stop and scale Maximum workpiece height: 160mm Everything functions perfectly. The machine is personally delivered and demonstrated by us anywhere in Germany for €220.00, so you have no risk when purchasing. Delivery to Austria and the EU is also possible on request. The machine table is 870mm wide, 140mm deep at the sides, and 350mm deep in the center. Professional equipment, not DIY store scrap. Ready for immediate operation. With 2-jaw drill chucks up to 20mm. Very stable and durable construction. The precision guides with play-free ball bearing bushings are in excellent condition and move smoothly.

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, Thickness planer PANHANS Type 425 510mm The machine is in very good optical and technical condition. It comes from an assembly company and has only seen minimal use; everything is in original condition, with no components repainted. The machine has only been cleaned. Fully functional in all respects. Ncedpfx Ajxdu Tqehvop - Equipped with kickback safety device - The planer knives are very easy and precise to adjust. Setting gauges, which can be mounted onto the cutterblock, are included to ensure maximum precision. - Chips are efficiently extracted thanks to the enclosed system. - Four-knife cutterblock for conventional strip planer knives. - The thickness table is mounted on two trapezoidal spindles, ensuring stability and torsion resistance - With protective hood, which can be lifted upward - Maximum planing width: 510mm; maximum planing height: 250mm - We provide personal delivery and demonstration throughout Germany for €220. This eliminates any risk at purchase. Delivery to other countries is also possible on request. - Quiet operation in compliance with DIN 45635 - Highly effective feed rollers; infeed and outfeed rollers are made of metal, with adjustable pressure on both rollers - There are two support rollers embedded in the table, which can be brought up when needed (particularly helpful when planing moist wood) - User manual included - Feed speed: 7 and 14 m/min, powered by a separate gear motor - 160mm extraction port - Thickness table elevates electrically, with fine adjustment via handwheel - Planing height is easily and precisely read from a mechanical counter - Achieves an extremely clean finish - 5.5 kW motor ensures virtually fatigue-free operation - The machine comes fitted with four sharpened knives - Extremely robust and durable design, top workmanship and highest quality - Ready for immediate use - 380V, 5.5kW - Speed: 5000 rpm - Year of manufacture: 1989 - Weight: approx. 800 kg - Certified GS tested version - Optimal, simple, quick, and safe operation - Heavy, solid, and durable construction—simply indestructible

Condition: used, High-pressure industrial water pumps – 90 kW – 55 bar – 33 m³/h Available: No. 2 high-pressure multistage industrial pumps for water lifting, complete with three-phase asynchronous electric motor and installation base. The pumps are from a snowmaking plant and are in good overall condition, ideal for reuse in pumping stations, process systems, or pressurization plants. Technical data Pump: Flow rate: 33 m³/h Head: 55 bar Type: High-pressure multistage pump Mounted on skid with flexible coupling Electric motor: Type: Three-phase asynchronous Power: 90 kW Voltage: 400 V Current: 167 A Speed: 2970 rpm Duty: S1 (continuous) Ncedpfoytgvwox Ahvep Equipment supplied: - Industrial mounting base - Motor-to-pump flexible coupling - Complete assembly ready for installation - Identification nameplates present Typical applications: - Industrial water pumping stations - Pressurization systems - Process plants - Fire-fighting systems - Artificial snowmaking plants - Industrial washing installations 2 identical units available.

Condition: new, We aim to empower foam converters to manufacture better products at higher speeds and lower costs. Ncedpfxjytc Ate Ahvep • Automatic welding, 2 tables (right/left for pendulum operation) • Adjustable needle height.

Year of construction: 2026, condition: new, Manual hot plate welding machine, designed for welding laminated PE/EPE foams. It offers high precision and high productivity, 1000x600 mm Nedpfjytcwksx Ahvscp

Condition: good (used), Year of construction: 2014, center height: 180 mm, center width: 600 mm, grinding diameter: 260 mm, Sinumerik 840D sl cnc control tail stock measuring device diamant roll portal loading device Technische Daten / technical details: Spitzenweite / center to center 600 mm Spitzenhöhe / center height 180 mm max. Schleifdurchmesser / max. grinding diameter 260 mm Schleifscheibenmaß / grinding wheel dimension 600x80x304,8 mm Ncjdovygwwopfx Ahvep Reitstock / tail stock MK4 Antriebsleistung Schleifspindel / drive capacity grinding wheel 12 kW Gewicht der Maschine / weight 7500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), motorized limit stop behind foot switch Ncodpfohtq N Nsx Ahvjp Technische Daten / technical details: Schnittleistung (Blechdicke) / max. cutting capacity (thickness of sheet) 6 mm Schnittlänge / max. cutting length 2035 mm Hinteranschlag / arrester behind 1000 mm Ständerweite / distance between columns 2000 Mm Antriebsleistung / drive capacity 11 kW Gewicht der Maschine / weight 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: new, planing width: 335 mm, Replaceable knives for planer – Manufacturer: Kanefusa, for Marunaka planer with reversible knife system, length 335 mm, set of 2 pieces. Ncedoym Sc Aspfx Ahvjp

Condition: used, Year of construction: 2007, BMS Be-Ens plating for crates 400x300 mm, can be converted for other crate sizes. Njdsyryz Rspfx Ahvjcp

Condition: used, Year of construction: 2012, Air Cushion Machine Fromm Airpad Machine Manufacturer: Brüninghaus Model: AP 502 Year of manufacture: approx. 2012 Nedewulyljpfx Ahvecp Film material: PA/PE composite film or polyethylene film (100% recyclable) Compressed air connection: NW 10/4 - 8 bar; max. 82 Nl/min (during cushion production): max. 3.5 Nl/cycle Performance: 25 – 49 cycles/min (depending on film type and cushion size) Electrical connection: 230 VAC; 50/60 Hz; 16 A; 2.0 kVA Dimensions (LxWxH): 1,600 x 767 x 1,292 mm Weight: 230 kg Accessories / Special equipment: • Stored programs for various cushion sizes • Program change at the press of a button • Individual production from 4 cm to 16 cm length with defined filling degree • 10 programs available for storing multiple parameters

Year of construction: 2011, condition: used, functionality: fully functional, A complete cooling water unit used for cooling screw compressors. Pump unit with machine frame consisting of: 3 x Type: CRN32-1-1 A-F-G-V-HQQV / 30 m³/h 10.7 meters, 1.5 kW 6 x manual stainless steel shut-off valves 1 x pressure relief valve 1 x Rosemount GP6 S22 C1 pressure transmitter 6 x stainless steel pressure gauges Cl.1 2 x Gerodur plastic pipes with elbow fittings, 140 x 8.3 mm 1 x mounting frame Heat exchanger unit with frame consisting of: 2 x bolted plate heat exchangers Alfa Laval Type: M6-MFG Volume: 11.2 liters Max. operating pressure: 10 bar Max. temperature: 80°C 6 x manual intermediate flange shut-off valves, stainless steel 2 x electric valves with Auma actuators with Harting connectors Ncjdjyrxuvspfx Ahvjp 2 x electric KSB BOA valves with Auma SAR 07.1-F10 actuators and MATIC heads with Harting connectors 2 x PT 100 thermometers 4 x analog thermometers stainless steel Cl.1 1 x Rosemount GP6 S22 C1 pressure transmitter 2 x PE welded pipe with bends 110x6.5 mm Gerodur 2 x PE pipe with bends 90x5.4 mm Gerodur 1 x expansion vessel 1 x mounting rack

Condition: used, GRUNDIG STEUERUNGSEINH. STE02 9.44209-1201 Nedpfx Ahjymqvuovecp

Condition: good (used), Hydraulic guillotine shear (used) Manufacturer: Fasti Model: TCHE 25/6 Max. cutting length: 2540 mm Max. sheet thickness (ST 40): 6.0 mm Distance between uprights: 2540 mm Backgauge travel: 0 – 750 mm Hold-downs: 16 units Motor power: 12 kW Machine weight: 5400 kg Required space: Width 3000 mm, Depth 2700 mm, Height 1900 mm Features: Foot switch, angle gauge, front support arms, motorized backgauge, cutting edge illumination, sheet lifting device. The machine is in very well-maintained condition and ready for immediate use. Forklift available, free loading onto truck. Affordable shipping possible. Location: 48477 Hörstel. Ncedpoyrr E Uefx Ahvep

Condition: good (used), Year of construction: 1970, Transformer, transformer, converter, three-phase autotransformer, isolating transformer, 3-phase transformer Ncsdpfob Iqgnox Ahvop -PCB containing insulating liquid exchanged in 1998 -Input: 6000V -Output: 400V -Power: 200kVA -Type: LT -(for technical data see photos) -Dimensions: approx. 1300/800/H1600 mm -Weight: about 1000 kg

Condition: good (used), Hydraulic guillotine shear (used) Manufacturer: Fasti Type: TCHE 254 Max. cutting length: 2540 mm Max. sheet thickness (ST 45): 4.0 mm Distance between side frames: 2540 mm Backgauge adjustable: 0 – 1000 mm Hold-downs: 14 units Motor power: 6.5 kW Machine weight: 3400 kg Required floor space: Width 2950 mm, Depth 2700 mm, Height 1900 mm Foot switch Angle gauge Front support arms Motorized backgauge Cutting edge illumination Digital display for backgauge The machine is in very well-maintained condition and ready for immediate use Forklift on site, free loading onto truck Inexpensive shipping possible Machine location: 48477 Hörstel Nsdjyrhfwspfx Ahvjcp

Year of construction: 1991, condition: used, 6 horizontal stainless steel tanks with dished bottoms, side cooling zone, manhole, sampling tap and central outlet. The purchase of a partial quantity is possible. Additional title: stainless steel tanks with temperature control Total capacity: 2429 hl Max. pressure 4 Tanks: 0 bar Max. pressure 2 Tanks: 5 bar Material: stainless steel Position: vertical Base construction: cylindrical tank with dished bottoms, placed on 4 square tube feet Features: 4 storage tanks (approx. 445 hl), 2 pressure tanks (approx. 320 hl), shell manhole, 1 shell cooling zone, insulated with steel metal cladding Periphery: own temperature control Ncodpfx Ahovcqulsvjp