Used Fast Run for sale (9,704)

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Machine refurbished by Nodema for packaging products in bundles. The machine has a heat-shrink tunnel attached to the frame for packaging. It can process up to 17 products per minute. The sealing bar is 600mm wide. The film width is up to 800mm. Nsdpey Tuxzofx Ahkolf This machine has an angled infeed, making it ideal for packaging products such as canned beverages with a tray.

Condition: new, 25-Meter SLP Pallet Racking System Spanning a total length of approximately 25 meters, the system comprises 9 bays, each with a clear bay width of 2,700 mm. This corresponds exactly to the standard width required to store three Euro pallets side-by-side. Special Rack Depth: The upright depth of 1,100 mm is the standard for longitudinal Euro pallet storage. Thanks to the extended upright depth of 1,700 mm and the use of deep grating decks (1,700 x 890 mm), this system is ideally suited for non-standard dimensions, transverse storage, or order picking operations. Capacity & Load Ratings: With 6 levels (including the floor level), the system accommodates a total of 162 pallets. The maximum bay load capacity of 3,000 kg allows for a heavy load of up to 1,000 kg per pallet. The maximum total bay load is 15,000 kg. Technical specifications at a glance: Manufacturer: SLP (Saar-Lager- und Profiltechnik) Type: SL25 Total length of rack run: approx. 25.15 meters (9 bays at 2,700 mm + upright width) Rack height: 7,150 mm Total rack depth: 1,700 mm (upright depth 1,100 mm + 600 mm upright extension) Clear bay width: 2,700 mm (perfect for 3 Euro pallets per level) Number of bays: 9 bays Number of storage levels: 6 levels (5 beam levels + floor level) Total pallet spaces: 162 spaces Max. bay load (per level): 3,000 kg (with evenly distributed load) Njdpezrlxmefx Ahkolf Max. total bay load: 15,000 kg Scope of delivery: 10 x SLP pallet rack upright frames, blue, 7150 x 1100 mm 10 x SLP pallet rack upright frames, blue, 7150 x 600 mm 135 x Mesh deck panels, 1700 x 890 mm 42 x SLP pallet rack beams, orange, 2700 mm Your partner for safe warehouse logistics: assembly, disassembly & rack inspection An efficient warehouse is the backbone of your success. We ensure that your racking systems are professionally installed and meet all safety standards. As experts in warehouse technology, we offer a comprehensive, one-stop service: Assembly & Disassembly Whether for new installations, modifications, or warehouse decommissioning, we handle the professional assembly and dismantling of your systems: - Pallet racking (heavy-duty & standard) - Shelving units for small parts and archives - Mezzanine floors for optimal space utilization Racking Inspections (compliant with DIN EN 15635) Safety is a legal requirement. We conduct the mandatory annual expert inspection (in accordance with DGUV Rule 108-007): - Inspection for deformation and damage. - Checks of locking pins and load capacity signs. - Preparation of a legally compliant inspection report, including an inspection sticker. "A complete solution: We are happy to offer suitable bank financing for your project." komplett-konzept.leasingo.de You can find additional items—both new and used—in our shop! International shipping costs available upon request!

Condition: used, CNC press brake FASTI, Type 904-125/30 Serial No. 95-904-5775 Year of manufacture 1995 Press force 125 tons Working length 3050 mm Stroke approx. 335 mm Stand distance 300 mm Distance between side stands 2550 mm Tool installation height max. 465 mm (opening width between tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Back gauge X-axis 500 mm Back gauge R-axis 115 mm Back gauge Z-axis approx. 1950 mm Lowering speed Y-axis rapid traverse 90 mm/s Lowering speed Y-axis working traverse 8.9 mm/s Return speed Y-axis retraction 75 mm/s Oil capacity approx. 160 liters Motor power 18.5 kW Mains connection 400 volts, 50 Hz, 20 amps - 7-axis CNC control DELEM, Type DA 58 with LCD screen - 1 axis for back gauge - gauge depth (X-axis) - 2 axes for back gauge - gauge height (finger R1 + finger R2) - 2 axes for back gauge - gauge fingers, laterally adjustable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or only 2-hand control panel - Hydraulic tool clamping for the upper tool system TRUMPF, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool shank 13 x 20 mm) - Safety light curtain FIESSLER, Type AKAS - 2 pcs material support arms, manually adjustable laterally and in height - Electrical diagram, hydraulic diagram, user manual for control system available - Control cabinet on the machine - Without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons Nlodshmmfkjpfx Ahkjf Good condition

Condition: used, Swing bending machine with additional segmented upper tool, gooseneck rail. Swing bending press brake FASTI type 2095-25-2.5, serial no. 94 295 004, year of manufacture 1994. Working length 2540 mm, max. sheet thickness 2.5 mm, upper beam stroke 380 mm, bending beam motor power 2.2 kW, power supply 400 Volt, 50 Hz. - NC control FASTImatic FM100 - one-piece sharp rail 135° - additional segmented upper tool, gooseneck rail - controlled backgauge - continuous stop rail - controlled bending angle via control - electric foot switches. Weight 3000 kg. In good condition. Nlsdpfjttc Uajx Ahkef

Condition: excellent (used), For sale: a Grundfos CRK2-260 AMA AUUV multi-stage vertical pump with a three-phase Grundfos MG 100LB2-28FT130-C motor. The unit is fully functional, tested, and ready for operation. Its technical condition is very good, with normal signs of wear and tear resulting from use. Pump specifications: Manufacturer: Grundfos Model: CRK2-260 AMA AUUV Pump power: 3.0 kW Power supply: 3-phase Frequency: 50 Hz Flow rate: 16–58 l/min Head: 107–225 m Nlodpfxjzn N T Te Ahkef Motor specifications: Manufacturer: Grundfos Model: MG 100LB2-28FT130-C Power: 3.0 kW Power supply: 200–220 V Δ / 346–380 V Y (50 Hz) Rotational speed: 2880–2910 rpm Protection class: IP54 Insulation class: F

Condition: excellent (used), For sale: a Grundfos SPK2-15/8 vertical multistage pump with a Grundfos MG 71A2-14FT85-B three-phase motor, rated at 0.37 kW. The pump is fully functional, tested, and ready for operation. It is designed for pumping coolants, emulsions, process water, and other liquids used in CNC machine tools and industrial installations. Normal signs of use are visible. Pump specifications: Manufacturer: Grundfos Model: SPK2-15/8 Version: AMA CVUV Flow rate: 15–35 l/min Head: 23–31 m Frequency: 50 Hz Motor specifications: Manufacturer: Grundfos Type: MG 71A2-14FT85-B Power: 0.37 kW Voltage: 3×200–220 V Δ / 346–380 V Y Frequency: 50 Hz Rated current: 1.92 / 1.10 A Speed: 2800–2840 rpm Power factor (cos φ): 0.82–0.75 Ingress protection: IP54 Insulation class: F Nledjzn N Auepfx Ahkof

Year of construction: 1981, condition: good (used), machine/vehicle number: 3626, OFFER 21448 Technical data: - max. working width 2540 mm Nlsdpfx Ajhhc Ixohkjf - max. cutting capacity St 40 4 mm - motorized cutting angle adjustment - cutting gap adjustment by means of graduated adjusting screws - number of hydraulic clamping bars 14 pcs - motorized rear stop with positioning 10 - 1000 mm - number of strokes depending on cutting angle and cutting length 23 per minute - hydraulic drive 400 V / 7.5 kW - table height 1030 mm - space requirement approx. W 2500 x H 1630 x D 2150 mm - weight approx. 3600 kg - including: - sheet metal lifting with pneumatic assistance - front angle stop + support arms - electronic cutting depth adjustment - cutting line illumination - electric foot switch

Condition: good (used), Year of construction: 1990, machine/vehicle number: 5211, Offer 24289 Technical data: - max. cutting width 3060 mm - max. cutting capacity at 45 Kp/mm² 4 mm Nodpfx Ajt Ucgaehkslf - Cutting angle 1.50 ° - Cutting gap - adjustment via adjusting screws - Number of hold-down devices 15 pcs - Stroke rate 23 to 43 /min - Front angle stop - Motorized backgauge position-controlled 15 - 850 mm - Cutting line lighting - E - foot switch - Drive 400 V / 7.5 kW - Space requirement approx. W 3900 x H 1600 x D 2400 mm - Weight approx. 4.5 t

Condition: good (used), Year of construction: 1993, machine/vehicle number: 93212004, Offer 26084 Technical Data: - Maximum working width: 2040 mm - Maximum material thickness at 40 kg/mm² tensile strength: 4 mm - Bend angle adjustment: electronically pre-selectable, 0 - 135° - Automatic sequence control for a complete work cycle - Maximum upper beam opening/clamping stroke: 350 mm Nljdpfx Ajy Em Dgohkjf - Height adjustment: - Bending beam: 100 mm - Lower beam: 100 mm - Upper beam drive: 400 V / 4 kW - Bending beam drive: 400 V / 4 kW - Bending beam adjustment - Back gauge adjustable via handwheel - Electric foot switch - Space requirement with back gauge: approx. W 3200 x H 1650 x D 2100 mm - Weight approx.: 4500 kg

Condition: good (used), Year of construction: 1994, machine/vehicle number: 94-417-008, Offer 24356 Technical data: - max. material thickness at 40 kg/mm² strength 3 mm - Max. projection 500 mm - Working depth 430 mm - hydr. infeed of the top roller - Roller center distance 125 mm - Working speeds infinitely variable 3 to 15 m/min - Right + left rotation - Drive 400 V 1.5 / 2.5 kW - Space requirement approx. W 630 x H 1450 x D 1200 mm - Weight approx. 550 kg - with: - E - foot switch for top roller feed - E - foot switch for right - left rotation Nsdet Sucnopfx Ahkelf - Various roller sets - Stop apron

Condition: used, machine/vehicle number: xxxx, Ref. No. 18448 Technical Data: - 1 inclined tool holder frame - 1 extendable tool holder frame - 1 extendable drawer, W 900 x D 500 x H 70 mm - 1 extendable drawer, W 900 x D 500 x H 140 mm Nedpfx Ahjwwifkekslf - Required space: W 1000 x D 500 x H 1950 mm - 26 pcs. SK 40 tool holders, some with mounted tools - 30 pcs. plastic inserts - various accessories for milling machines - Cabinet is not lockable - Cabinet weight approx. 120 kg - Tool weight approx. 80 kg

Condition: good (used), Year of construction: 1991, machine/vehicle number: 91212035, Offer 26016 Technical data: - max. working width 2040 mm - max. material thickness at 40 kg/mm² tensile strength 4 mm - bending angle adjustable electronically, preselectable 0 - 135° - automatic sequential control for a complete working process - largest opening width / stroke of the upper beam 350 mm - height adjustment: - of the upper beam 100 mm - of the lower beam 100 mm - upper beam drive 400 V / 4 kW Nljdozgu Tispfx Ahkjf - bending beam drive 400 V / 4 kW - accessories: - motorized bending beam adjustment - rear stop adjustable with handwheel - electric foot pedal - space requirement with rear stop: - approx. W 3200 x H 1650 x D 2100 mm - weight approx. 4500 kg

Condition: used, Lathe chucks and holders (VDI 30/40/50) from PLN 5/piece on request Nsdpey H Ezgofx Ahkolf

Condition: used, Year of construction: 2012, Air cushion machine, Fromm Airpad machine Manufacturer: Brüninghaus Type: AP 502 Year of manufacture: approx. 2012 Film material: PA/PE composite film or Polyethylene film (100% recyclable) Compressed air connection: NW 10/4 - 8 bar; max. 82 Nl/min (during cushion production): max. 3.5 Nl/cycle Performance: 25 – 49 cycles/min. (depending on the film type and cushion size) Electrical connection: 230 VAC; 50/60 Hz; 16 A; 2.0 kVA Dimensions: (L x W x H) 1,600 x 767 x 1,292 mm Weight: 230 kg Accessories / special equipment: • Stored programs for different cushion sizes • Program change is activated by pressing a button • Cushions from 4 cm to 16 cm in length can be produced individually with a defined filling level Nledpfx Ajwulylshkjf • 10 programs are available for storing multiple parameters 22726ä

Condition: excellent (used), Year of construction: 1997, Manufacturer: Brüninghaus Verpackungssysteme GmbH & Co. KG Year of manufacture: 1997 Machine serial number: 1390542 Model: SKL-90 Nlodpfx Aeyubh Dehkjf

Condition: new, Carton erector Igluetech/Brunel Engineering Services RSE 4 units Price per unit Nledpjvu Sriofx Ahkjf

Condition: excellent (used), Electric Schröder plate shear – in top condition – ready for immediate use – retains its value. For sale is a Schröder plate shear with a hand-operated depth stop, in good technical and optical condition. 2x4mm. Nljdozq Rwlepfx Ahkef Includes loading. Sale: • Machine price (net) • You will receive a proper invoice with VAT shown. • Shipping or freight forwarding possible (upon request) • Inspection possible by appointment Please note: If interested, please contact us by phone. Phone:

Condition: used, Year of construction: 1977, Manufacturer: BOSCH – STRUNCK Model : FKL A 06 Year: 1977 Type: Automatic filler Plunging filling heads Filling pumps per set: 6 units Nsdsx R Diwspfx Ahkslf 1 group of pumps up to 100 ml 1 group of pumps up to 200 ml Piston stroke adjustment: mechanical Motor power: 0.37 kW Laminar flow Filling head storage system withclosed circuit for cleaning. Machine dimensions: 100 x 80 x 245 cm Video in running condition available

Condition: used, Manufacturer: SPALECK Nsdey Nlmbepfx Ahkelf Drum diameter: 1100 mm

Condition: used, Maximum grinding length: 1000 mm Maximum wheel diameter: 320 mm Bore: 30 mm Manufacturer: TOS Nljdpfx Aev Taafohkef

Condition: ready for operation (used), NIKKEN 5 AX -170 CNC / Rotary Table incl. Controllers -TYPE 5-axis -AX 170 CNC / Rotary Table -The NIKKEN / 5 AX -170 is a compact and robust CNC swivel table for precise drilling and milling operations in 4- and 5-axis machining. -Complete documentation available. -Well-maintained overall condition. Overall dimensions: L x W x H 780x340x280mm Errors and omissions excepted. Nodezqg I Hjpfx Ahkslf

Condition: excellent (used), Cnc rotary table, Nikken 5AX-230 4 and 5 axis for Mazak etc. was mounted on a VTC 300, due to new machine 5 axis now for sale, Nledpsp U Umkofx Ahkef

Condition: new, functionality: fully functional, Grundfos TPE 50-430/2 S-A-F-A-BQQE-LD1 Single Stage Close Coupled In Line Centrifugal Pump. Specifications: DN50 flanges 345mm between flanges Nledpfx Aetp A Shjhksf Q = 35.1m3/h H = 33.9m n= 2920 /min Good working condition. Please check out our other listings as well.

Condition: used, 30kw 280BAR Nlsdecl R Abepfx Ahkof 2 PIECES IN STOCK

Condition: used, Year of construction: 1998, machine/vehicle number: 177054769, travel distance X-axis: 400 mm, travel distance Z-axis: 280 mm, spindle speed (max.): 3,000 rpm, turning diameter: 200 mm, feed rate X-axis: 30,000 m/min, feed rate Z-axis: 60,000 m/min, Weisser Univertor A-90L 8-position tool turret, chip conveyor, Siemens Sinumeric control system, hydraulic unit. Nsdpfx Aszl R Ugehkelf