Used Falling Film Evaporators for sale (2,069)

Year of construction: 2008, condition: like new (used), We sell a package of 26 cooling systems - Alfa Laval brand evaporators, all of which work on the glycol cooling system. The systems are powered at 220V or 380V or have an interchangeable power supply system according to the user's needs. The year of manufacture of the systems is 2008. We can sell also piece by piece not only as a package upon request. Commercial unit coolers designed for use in small and medium cold rooms from 10 up to 400 m³. Models designed for easy maintenance with immediate access to inspection areas. This series is available as a DX evaporator and brine unit cooler. Finned coil - H(C)FC Inner grooved Cu tubing ø 12 mm, triangular tube pitch - Brine Smooth Cu tubing ø 12 mm, triangular tube pitch - Corrugated Alu-fins - Fin spacings 4, 5.5, 6, 7, 8, 10 and 11 mm. • 1 to 4 AC fans, ø 250 mm up to ø 500 mm, drawing through the coil. Fan motors 230V/50-60Hz/1ph or 400V/50-60Hz/3ph in two noise levels (H/L). Motors with dynamically and statically balanced external rotors, manufactured in accordance with VDE 0530/12.84. • Corrosion resistant materials: coil frame AluZinc, casing strong and durable sheet metal, powder-coated RAL 9002. • Hinged drip tray and side covers for easy installation and maintenance. • Sufficient space for mounting of expansion valve inside the casing. • Mounting brackets allow flush ceiling mounting. • Fitted with schräder valve on the suction connection for testing purposes. • Pumped system available on request. • Stickers indicate fan direction and refrigerant in/out. Fpsdpfeg N Db Hox Ak Uel • Delivery in mounting position. Coolers are mounted on wooden beams. Installation can take place with the use of a forklift. 1 AlfaCubic series (BL, GL, RL) 2 Refrigerant system (E = dry expansion, W=water/glycol, 3 Noise level (H=high, L=low) 4 Fan diameter (25=250, 35=350, 40=400, 50=500 mm) 5 Number of fans (1 to 4) 6 No. of tube rows (A=4, B=6, C=8) 7 Phases (S= single-phase, D= 3 phases Δ connection) 8 Motor voltage (230V, 400V) 9 No. of circuits 10 Packing (CR=crate) 11 Casing material (AP= powder coated, SS= stainless steel) 12 Defrost system (A= air, E= electric defrost, HG= hotgas) 13 Fin material/coating (AL=aluminium, EP= epoxy coated aluminium) 14 Fin spacing (4, 5.5, 6, 7, 8, 10 and 11 mm) 15 Tube material (Cu=copper) The evaporator coils of these units are high performance and are built-in 1/2 ”fluted copper tube and fin corrugated aluminium with gaps of 3.5, 6 and 8mm. The frame, made of aluminium sheet, is provided with protection collars. This frame has the application of thermostatic expansion valves. Regarding their exterior structure, they are manufactured in aluminium painted in high resistance RAL-9018 polyester colour. The vibrations in these machines are avoided thanks to the fact that their entire structure is compact and highly rigid. All its parts are easily removable for maintenance. These evaporators are fitted as standard with helical fans with high-performance protection grilles and are equipped with 315 or 350mm motors. diameter. Single-phase for 230V 50Hz, with a degree of protection IP-54, with external rotor and low consumption. All motors are connected to a watertight general box, according to IP-55 regulations. Finally, defrosting is carried out with 230V electric heaters built in armoured stainless steel tubes. Its vulcanized ends avoid derivations and are inserted inside the battery and the tray. They are connected to a watertight junction box. Application: Lo

Condition: used, mileage: 153,000 km, power: 70 kW (95.17 HP), first registration: 12/1992, overall weight: 3,200 kg, fuel type: diesel, color: red, next inspection (TÜV): 12/2025, gearing type: mechanical, Year of construction: 1992, total length: 5,345 mm, total width: 1,975 mm, total height: 2,680 mm, number of seats: 9, Equipment: had accident, parking heater, Original German vehicle. In service with a small municipality until 2026, initially with the fire department and then with the municipal depot. This vehicle has a civilian truck registration as a "closed-body truck" and the papers indicate a total of 9 seats. The vehicle was initially used as a multipurpose vehicle (MZF), and later the municipality's lawnmower was transported in it. Only one bench seat is permanently installed. Two of the three bench seats were not needed in recent years and are included as loose items. The seatbelts and mounting screws are also included in their original condition. A folding table with a radio headset is still mounted on the left side, and an original large fire department first-aid kit is integrated into the interior. Engine: OM 602, 5-cylinder naturally aspirated diesel with 2874 cc. The engine always starts perfectly and initially runs smoothly, but after approximately 20 seconds of idling, the idling performance deteriorates significantly, and smoke starts to appear. When the engine reaches operating temperature, the smoke decreases, and the engine runs smoothly again, almost normally. The engine is either severely worn or has an engine malfunction. No precise diagnosis has been made yet. The vehicle starts immediately and functions well, and the usual engine power was fully available during a short test drive, but we do not guarantee its drivability. A repair is certainly necessary in the short term! For driving short distances or loading onto a RORO ship in the port heading to Africa, this 310 D appears to function without any problems. 5-speed manual transmission. 127 km/h. Ball-type trailer hitch with a 2000 kg braked or 750 kg unbraked towing capacity. Power steering. Original Mercedes/Eberspächer auxiliary heater (operational). Body with individual rust spots; overall, it is still relatively well-preserved due to being stored in a garage for many years. The window of the passenger door is damaged and covered with a film. The paintwork has been repaired in black around the lower part of the vehicle. Apparently, the car was always very well maintained at the fire department, but unfortunately not afterwards! The running board on the sliding door – which is still visible in the photos – has been removed for use on another vehicle and is no longer present. Fpodpfjyx N Hqjx Ak Uel Unladen weight: 2370 kg. Permissible total weight: 3200 kg. Overall vehicle dimensions: Length 5345 mm / Width 1975 mm / Height 2680 mm. The tires (205R14C) are from 2013 and are not porous, with approximately 50-60% tread depth. The vehicle is primarily intended for export or for genuine fans of the Bremen transporter who are looking for a completely unaltered base for restoration. The TÜV (technical inspection) expired in 12/2025 and will not be renewed. We have deliberately kept the purchase price attractive, as comparable vehicles in good condition are now usually sold for twice the price or even higher. A personal inspection is highly recommended due to the defects and can be arranged by appointment. This offer is only valid for commercial businesses, freelancers, and emergency services of all kinds. Unfortunately, sales to private end consumers are generally excluded. Subject to prior sale and errors. The purchase price is gross = net, with no VAT (according to §25a UStG / differential taxation).

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 40 t, bale weight: 350 kg, HSM HL 4010 Re / Li horizontal baler. Equipped with a loading tipper for the basket. Manufactured in 2015. Very good condition - regularly serviced by an authorized service center. Ready for use. Fedpez Aaggefx Ak Uspl Available for binding with wire, string, or polypropylene tape. Semi-automatic baler system with a 40-ton pressure for economical volume reduction of residual (recyclable) materials in industry and retail: Cardboard Tetra packs Films Foams PET bottles Insulation mats and other compressible materials. Press force: 400 kN Transport width: 1,767 m Transport height: 2,489 m Transport length: 5,573 m Weight: 4,500 kg Drive power: 7.5 kW Bale weight (depending on material): 300-350 kg Bale length x width x height: 750 x 1200 x 750

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: P281560766/3, power: 2.35 kW (3.20 HP), Single outlet roof top air coolers in good condition including their fans. AVAILABLE the following codes : DEA 093DL-DEB 081D-DEB 094DL-DEBE 072D-DEBE 081D-DEBE 082D-DPA 032S-DPA 041S-DPA 042S-DPA 043S Fedjul U Auopfx Ak Uepl The posted price is per piece.

Condition: used, Used Helpman LEX 22 evaporator on Freon with electric defrost. Complete with 2 ATB RFT0,25/4-7 fans - 50/60 Hz - 0,25 kW - 1410/1710 RPM - diameter 457 mm and a total airflow of 9.320 m³/h. Fpsdpfx Asrlk Dyjk Usl

Year of construction: 1965, condition: ready for operation (used), Suitable for the production of rigid PVC films with a minimum plasticizer content of 3%, number of rollers: 5, with documentation, retrofit 2003 and 2017. Fedpfxequu Tts Ak Uopl

Condition: used, Year of construction: 2020, Overview Krones Ergomodul modular container labeller. Containers run anticlockwise after the infeed in a frontal arrangement with two discharge starwheels. Finish RAL 9018 papyrus white in the wet-line section. Two docking positions at the carrousel, both in operation, accept the four labelling stations without tools, so cold-glue and self-adhesive labelling run on the same carrousel; height adjustment of the top part and each station is motorised with container type preselection. Technical data - Manufacturer: Krones - Model: Ergomodul - Year of manufacture: 2020 - Table pitch diameter: 1,200 mm - Rotary plates: 30 - Machine pitch: 125.6 mm - Main drive: controlled servo motor; Danfoss servo motors, container table - Cold-glue stations (2x): ERGOMATIC-CL, 8-shaft glue pallet carrousel, 8-section gripper cylinder d = 350 mm, unwinding length 40-130 mm, steel glue roller, integrated glue pump, gluing height 5-215 mm, housing stainless steel, AISI 304-similar - Self-adhesive stations (2x): AUTOCOL-TS 120, web speed 120 m/min, supply tolerance +/- 0.5 mm, four-axis stand (application height, container diameter, conicity, sloping position), two-reel holder with automatic splicing and end-of-reel detection, driven carrier-film rewinder, ionisation unit, reels up to 390 mm outer diameter, carrier film up to 150 mm - Container infeed: worm with servo drive; detects damaged and fallen-over containers - Container orientation: prepared for camera orientation at the carrousel (360-degree monitoring, one camera); electrical interface prepared, mechanical adjustment unit not installed - Coding: prepared for a laser coder at the carrousel, with laser guarding, safety switch, clock pulse, oil-free air supply Fpedpfx Aszzz N Hjk Uel - Conveyors: flat-top chain, 83.8 mm wide, stainless steel (AISI 304-similar); servo-driven infeed, PM-motor discharge, centralised frequency inverter control - Machine guarding: lifting doors at the carrousel (polycarbonate), hinged doors at the front table (tempered safety glass) - Pneumatics: Festo; Bosch-Aventics, Norgren Herion, SMC, Bürkert components - Electrical: 400/230 V, AC 3/N/PE, 50 Hz, 28 A full load, 50 A back-up fuse; UPS 400/230 V, 17 A - Media: 92.4 m³/h oil-free compressed air, 0.009 m³/h process water - Weight: approx. 10,600 kg total (carrousel 3,200 kg, front table 3,000 kg, 1,100 kg per cold-glue station, control cabinet 1,000 kg) Equipment - 2x ERGOMATIC-CL cold-glue labelling stations, interchangeable - 2x AUTOCOL-TS self-adhesive labelling stations, interchangeable - Stand-alone control cabinet with Krones iPanel operator terminal - Central lubrication (Lincoln progressive distributor with motor pump) - Ecopush rejection module - Handling parts set on trolleys The inspection unit (Checkmat) and the container coding device used with this labeller are not part of this machine. Condition Used, still installed and under power in an operating line; on-site inspection possible before purchase. Availability Available now. The machine is in Belgium and will be dismantled and moved to our location in Germany; dismantling, loading and transport quoted on request.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, total length: 2,000 mm, total height: 2,100 mm, total width: 1,300 mm, input voltage: 240 V, overall weight: 350 kg, pipe diameter (max.): 20 mm, product height (max.): 200 mm, product length (max.): 160 mm, product length (min.): 200 mm, Liquid filling machine for pouch packaging. The machine produces pouches from flat film by welding four sides. It is suitable for filling sauces, creams, salad dressings, and other liquids in the food, cosmetics, and non-food industries. Made in Hungary. The size can be easily adjusted from 10 to 70 grams. Easy to clean, reliable machine. Fjdpfxozv E A Ts Ak Ujpl

Condition: used, mileage: 135,050 km, power: 110 kW (149.56 HP), first registration: 07/2019, fuel type: diesel, overall weight: 2,800 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 5, total length: 5,304 mm, total width: 1,904 mm, total height: 2,477 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, Internal vehicle number: 7189X ----Why Autonext? Over 400 immediately available passenger cars & commercial vehicles. One of the largest vehicle exhibitions in the region. Over 1,000 satisfied customers annually - top customer ratings. Attractive financing & trade-in options available. Complete vehicle range available at autonext. Mobility made easy. WhatsApp chat: ### Offer: Financing from 4.99% ### ----Excellent condition! 1st owner, German vehicle, non-smoking vehicle Fsdpfxsx Sufle Ak Uepl Complete service history, exclusively at Volkswagen Like-new winter tires (rear) Like-new summer tires (rear) 8 tires in total, summer tires on steel rims Winter tires on steel rims Automatic transmission "DSG" Wheelchair-accessible conversion with wheelchair ramp "AMF Bruns" 2x Utila transfer chair Number of seats: 4 (expandable to 9) Rail system for seats Electric step Parking assistance system, front and rear Air conditioning Auxiliary heating Upon request, we offer a trailer hitch retrofit for only 599 euros, and if possible, an increase in the trailer load capacity to up to 3.5 tons. ---- Special equipment: * Audio system Composition Colour (radio/CD player, MP3 playback function) * Multimedia interface 2 x USB (Type C) in the front * Mobile Online Services App-Connect * Equipment package: Comfort Package Plus * Grab handles on A-pillars * Seat cover / upholstery: fabric Bricks * Seats in the driver's cabin: driver's seat, height-adjustable * Seats in the driver's cabin: lumbar support, driver's seat * Interior lights in the driver's cabin: reading light in the front * Sun visors with mirror * Waste bin * Multifunction display Plus * Driver assistance system: fatigue detection sensor * Heated windshield washer nozzles and display for windshield washer fluid level * Heated windshield washer nozzles * Display for windshield washer fluid level * Auxiliary heating with timer and auxiliary heater * Auxiliary heater * 2nd battery with battery monitoring * Rear indicator lights (roof) * Driver assistance system: parking assistance system, front and rear * Rear wing doors (opening angle 250 degrees) * Heated rear window with windshield wiper system * Air conditioning Climatic (driver's cabin) 2nd evaporator + auxiliary heating (cargo/passenger compartment) * Cargo area partition, half-height with upholstered trim * Tire pressure monitoring system * Mud flaps, front and rear * Tinted film for windows in the passenger compartment * Permissible total weight 3.08 t * Power assist for sliding door on the right Standard equipment: Electronic stability program (ESP) with brake assist, ASR/ABS, EDS and hill start assist, Driver assistance system: hill start assist, Airbag for front passenger, can be deactivated, Airbag driver/front passenger side, Anti-lock braking system (ABS), Traction control system (ASR), Drive type: front-wheel drive, Exterior mirrors electrically adjustable and heated, Exterior mirror, convex, left, Exterior mirror, convex, right, Floor covering in the driver's cabin: rubber, On-board tools, Driver assistance system: brake assist (HBA), Driver assistance system: multi-collision brake, Driver assistance system: side wind assist, Windows in the cargo/passenger compartment: - fixed, front and rear left, Windows in the cargo/passenger compartment: - fixed, front and rear right, Electric windows, Windshield laminated glass, Remote control key (2) foldable, Gearbox 7-speed - dual-clutch gearbox DSG, Glove compartment lockable, Glove compartment illuminated, Rear

Condition: used, Year of construction: 2001, Used Helpman THOR 254-8-BH evaporator on Freon with hot gas defrost. Complete with 5 ATB AFT71/4A-7 fans - 50/60 Hz - 0,25 kW - 1410/1710 RPM - diameter 450 mm and a total airflow of 26.300 m³/h. Fodpfjrlk A Uex Ak Uopl

Condition: used, Year of construction: 2018, Overview  This vacuum evaporator was manufactured in 2018 by Italian manufacturer REDA. The machine is designed for gentle concentration of musts, juices, and other liquid products at low temperatures to preserve aromas and product quality. It is almost new and offered for sale as it was intended for a project that did not proceed. The system features an automated, CIP‑ready design. Technical data  - Capacity: 100 L/h evaporation capacity at +22/+24 °C Fjdpfxeykrdbe Ak Uepl - Application: Concentration of musts, juices, and liquid products - Operating modes: Recirculation mode or direct concentration mode - Max. concentration: 55–70 °Brix - Daily output: 2,400 L evaporated / 24,000 L enriched to 10% - Utilities: - Electrical supply: 25 kW, 380 V / 3Ph / 50 Hz + PE - Water: +12/+18 °C (low consumption) - Compressed air: 6–8 bar - Connections: DN40 DIN, 50 mm hoses - Control system: PLC automation, IP65 control cabinet, digital temperature indicators Scope of Delivery  - Vacuum evaporator | REDA | CM100 | 2018 | Complete AISI stainless-steel construction - Evaporation chamber | Stainless steel, full inspection access - Heat exchanger | AISI 316L tubular exchanger - Vacuum pump | Liquid-ring system with cooling recirculation - Refrigeration group | Heating 75,000 kcal/h, cooling 60,000 frig/h, 2 × 12.5 HP Copeland compressors - Pumps | Stainless-steel centrifugal and mono volumetric discharge pump - Vapor condenser | Stainless-steel surface condenser - Instrumentation & tanks | Flowmeters, cold and hot water stainless-steel accumulation tanks

Condition: used, Year of construction: 2021, Overview This Robopac Helix 4 EVO pallet winder was built in 2021, with less than 500 operating hours - technically close to new. Fedpfszzz Rdox Ak Uopl The arm carries the pre-stretch carriage around the stationary pallet, so the load itself is never turned - the configuration for unstable, fragile or heavy loads at high output (capacity below). Built as a stand-alone unit. Technical data - Manufacturer: Robopac - Model: Helix 4 EVO - Year of manufacture: 2021 - Machine type: automatic rotating-arm stretch wrapper (pallet winder) - Operating hours: less than 500 h - Capacity: 82 pallets/h (11 wraps, 1,000 mm H), 73 (15 wraps, 1,600 mm H), 64 (19 wraps, 2,000 mm H) - Wrapping cycle time: approx. 36.3 s at H 1,600 mm, 15 wraps (conveyor excluded) - Pallet sizes: 800 x 1,200 mm and 800 x 600 mm, centred on the conveyor - Load height: 1,000 - 2,000 mm incl. pallet; mechanical max. 2,550 mm incl. pallet and conveyor - Load weight: 100 - 1,200 kg - Conveyor speed: 15 m/min - Machine height: 4,721 mm; hall height from 7,000 mm - Pre-stretch: PGSA carriage, electronically adjustable 100 - 400 % - Stretch film: LDPE / LLDPE, 17 - 23 µm, roll width 500 mm, max. dia. 250 mm, core 76 mm, max. weight 16 kg - Control: Siemens SIMATIC S7-1500 PLC, TP700 7" colour touch panel - Wrapping programs: 15, expandable to 64, 12 control steps per recipe, 4 password-protected access levels - Power supply: 400 V / 50 Hz, TN-S, control voltage 24 VDC - Compressed air: 6 bar, dry and oil-free - Documentation and HMI languages: German / English / Italian Equipment - Rotating arm on a four-column steel structure, geared slewing ring with central lubrication - Patented PGSA pre-stretch carriage with load cell, film tension corrected at the corners, set from the display - Automatic film clamping, cutting and impulse-sealing unit, spring gripper with 300 mm horizontal stroke - Easy Lock tilting roller and roping device for narrowing the film web from below - Pantograph top press unit for load stabilisation during wrapping - Photocell for automatic pallet-height reading - Integrated roller conveyor, pallets loaded and unloaded by forklift - SEW IP55 geared motors for arm rotation and carriage lift, FESTO pneumatic components - Glazed enclosure with Sick M4000 light curtains, 30 mm resolution, 1,800 mm field height - Enlarged illuminated switch cabinet and a separate, independent operator panel - TPM package: centralised lubrication points, gauges with red/green rings, maintenance intervals on the display - Troubleshooting in the HMI with fault location and remedy - R-Connect remote connectivity with cloud portal for production data and teleservice - Documentation printed and on USB: manual, CE declaration, diagrams, spare parts catalogue, layout Condition Used - virtually new, dismantled and professionally packed for transport; photographs show it assembled before dismantling. Sold without warranty. Availability Immediately. Location: Germany. Handed over dismantled and packed (EXW).

Condition: excellent (used), Year of construction: 2012, Lock met 30+ Throat / Vertical Fall Metal Detector The MET 30+ UNIVERSAL compact vertical fall system can be installed at the beginning of the production line to inspect materials in bulk powder or granule form or anywhere for free falling products. • Detects real-life contaminants • ATEX zone 21 approved • Throughput up to 50 tonnes per hour • Quick release sealed valve or cowbell reject mechanisms available • Sealed to IP 66 for washdown applications Fpsdpfxeu Dntlo Ak Usl

Condition: excellent (used), Year of construction: 2017, operating hours: 627 h, functionality: fully functional, total length: 6,900 mm, total height: 1,800 mm, total width: 1,600 mm, type of input current: three-phase, input voltage: 400 V, input current: 62 A, passage height: 300 mm, overall weight: 1,200 kg, passage width: 800 mm, input frequency: 50 Hz, nominal power (apparent): 43 kVA, throughput speed: 20 mm/s, temperature: 250 °C, Equipment: documentation/manual, BVM SC 8530 D3 Shrink Tunnel – Year of Manufacture 2017 – approx. 627 operating hours For sale is a BVM shrink tunnel SC 8530 D3, year of manufacture 2017, in technically flawless and visually very good, well-maintained condition. The system has only approximately 627 operating hours and is suitable for shrinking packaging films using hot air circulation. The adjustable tunnel transport and the adjustable side and bottom air flow allow the shrinking result to be adapted to different products and films. Technical data Manufacturer: BVM Brunner GmbH & Co. KG Type: SC 8530 D3 Year of manufacture: 2017 Machine no.: 20170962241 Commission no.: 6224 Operating hours: approx. 627 h Mains voltage: 3N 400 V Mains frequency: 50 Hz Current consumption: 62 A Power: 43 kVA Fuse rating: 63 A Fedpozwk T Tjfx Ak Ujpl Max. passage width: 800 mm Max. passage height: 300 mm Transport speed: approx. 1.2 m/min at 50 Hz Working temperature: 110–250 °C Suitable for film types up to 100 µm External dimensions L × W × H: approx. 6,900 × 1,600 × 1,800 mm Total weight in operating condition: approx. 1,200 kg Sound emission: ≤ 75 dB(A) Equipment / Functions Hot air circulation Adjustable tunnel transport Temperature control Adjustable side air flaps Adjustable bottom air flow Heating fan Cooling fan Electronic preset counter Emergency stop device Cooling automatic Clean and clearly structured control cabinet Original operating manual available Condition The system is in perfect technical condition and is also visually in very good and well-maintained condition. With only approximately 627 operating hours, the machine has very low operating hours. Price €17,000 (negotiable) Inspection possible by arrangement. Further information and pictures available upon request. Subject to prior sale and errors.

Condition: used, Evaporator Guntner -Type: S-GHN 071.2H/27-EHS50.E -Cooling capacity: 50 kW at DT8, 40.2 kW at DT7 Fpedezaz U Iepfx Ak Uel -Fin spinning: 7 mm -Fans: 2 x 710 mm -Dimensions: 3500 x 1060 x 970 mm -Electric defrost -Refrigerant: Freon -Volume: 71.5 L -Weight: 387 kg -Quantity in stock: 4 -Reference number: CH 605 -Condition: Used in very good condition, evaporator 100% tight under nitrogen, fans working, ready to work

Condition: used, Evaporator Guntner -Type: S-GHN 071B/27-E -Cooling capacity: 39.7 kW at DT8, 31.5 kW at DT7 -Fin spinning: 7 mm -Fans: 2 x 710 mm -Dimensions: 3530 x 850 x 1150 mm -Electric defrost -Refrigerant: Freon -Volume: 54 L -Weight: 317 kg -Quantity in stock: 2 -Reference number: CH 606 Fpsdpoza D Ukefx Ak Uol -Condition: Used in very good condition, evaporator 100% tight under nitrogen, fans working, ready to work

Condition: like new (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 48041, table height: 850 mm, table width: 1,200 mm, overall weight: 830 kg, hole diameter: 28 mm, table length: 2,400 mm, Demmeler 3D welding table, Profi Eco Line D28, with accessory cart and extensive original accessories – in new condition. Fedpfx Akszwac Rj Ujpl For sale is an original Demmeler 3D welding table, Profi Eco Line System D28, with dimensions of 2400 x 1200 mm. The table was purchased in 2014 and has since been stored in our workshop but has never been used in production. The accessory cart and all accessories were also not used in regular operations. The welding table is in very good, unused condition. In some areas, the original protective film is still in place. Due to long-term storage, minimal surface rust has formed on some edges. However, this does not affect the functionality or the working surfaces. The original invoice (company data blacked out) and a price comparison from 2014/2026 showing a price increase of approximately 31.5% can be viewed upon request. The scope of delivery includes: Demmeler 3D welding table, Profi Eco Line D28 Original Demmeler accessory cart Extensive original Demmeler accessories (stops, angles, clamping and positioning elements, etc.) as per the inventory list Sale ex works (EXW Munich). Loading and transport are the responsibility of the buyer. Sale exclusively to business customers. Inspection and testing before purchase are expressly desired. Sale is made without any warranty, guarantee, or right of return.

Condition: excellent (used), Year of construction: 2012, operating hours: 350 h, functionality: fully functional, machine/vehicle number: R-3176, overall weight: 5,500 kg, total width: 1,400 mm, total length: 7,000 mm, temperature: 200 °C, power: 6 kW (8.16 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, For sale is a Binder DRYON DRVF 1400×7 fluidized bed/vibrating dryer for wood chips, compost, biomass, wood shavings, and comparable bulk materials. Fsdpfx Aozg Dx Usk Uspl The system was used exclusively for testing purposes and has only approximately 300–400 operating hours. It is in good condition and fully functional. Key data: (The system has previously been used for steam drying with superheated steam at approximately 200 °C. Conversion to other drying media, such as air or flue gas, is possible in principle with appropriate modifications.) - Dryer width: approx. 1,400 mm - Overall length: approx. 7,000 mm - Input capacity: approx. 2,000 kg/h wet (designed for green waste) - Output capacity: approx. 1,200 kg/h dry (designed for green waste) - Water evaporation: approx. 667 kg/h (designed for green waste) - Output moisture content: ≤ 10% (designed for green waste) - Installed electrical power: approx. 6 kW - Weight: approx. 5,500 kg Upon request, additional components for a complete drying unit can be purchased. These include a filter system, a high-performance radial fan, and the associated drive motor. (see planning drawing) Filter system: NESTRO Lufttechnik GmbH, Type Jet 9525, year of manufacture 2013, factory number FA169096, filter area 282.6 m², max. compressed air 6.0 bar, category EK004182, weight approx. 8,000 kg. Fan / drive motor: High-performance radial fan Type HRV28-450 with drive motor VEM motors GmbH, Type IE2-W21R 315MX2, year of manufacture 02/2013, motor number 180022/0001 H, power 160 kW / 218 HP, voltage 400 V, current 274 A, speed 2,973 min⁻¹, frequency 50 Hz, protection class IP55, insulation class 155, weight approx. 955 kg.

Condition: used, Automation Assistant Oy LG2750 Linear Guided Free Fall Tester Manufacturer: Automation Assistant Oy Type: LG2750 Date of manufacture: 07/01 Machine type: Linear Guided Free Fall Tester For sale is a used Automation Assistant Oy LG2750 Linear Guided Free Fall Tester. This linear guided free fall test stand was designed for reproducible drop and impact tests and is suitable for quality assurance, research, development, and industrial testing applications. Operating manual and electrical documentation are available. Technical data: Manufacturer: Automation Assistant Oy Type: LG2750 Power supply: 230 V AC / 50 Hz Max. current consumption: 10 A Control voltage: 24 V DC / 2.5 A Pneumatic supply: max. 8 bar Impact material: concrete garden paving stone 300 × 300 × 50 mm Frame: aluminum profile Protective panels: polycarbonate / XT-acrylic Other materials: aluminum, steel and POM Dimensions: External dimensions (W × D × H): approx. 850 × 900 × 2750 mm Weight of test tower: approx. 155 kg Weight of impact table: approx. 55 kg Total weight: approx. 210 kg Fsdpfx Akozn Uqds Ujpl Equipment: Touchscreen control panel Closed safety cabinet with protective glazing Linear guided drop sled Pneumatic gripper SMC pneumatic components Emergency stop system Impact table with concrete impact plate Electrical documentation available Application areas: Drop tests Impact tests Product testing Quality assurance Research and development Laboratory and industrial applications Transport data: External dimensions (W × D × H): approx. 850 × 900 × 2750 mm Transport weight: approx. 210 kg Condition: Used The unit was last used in an industrial setting. Optical condition as shown in the pictures. Scope of supply: Automation Assistant Oy LG2750 Linear Guided Free Fall Tester Operating manual Electrical documentation Accessories as shown in the pictures Availability: by arrangement. Scope of supply as shown in the pictures. Subject to changes, errors and prior sale.

Year of construction: 1999, condition: defective spare-parts repository (used), functionality: limited functionality, machine/vehicle number: 2200268., We sell an automatic packaging machine (stretch film packaging machine, tray packaging machine ), ULMA model COMPACT, MFG 1999, SN: 2200268. Packaging for trays with stretch film including Bizerba scale type: 18-A (max 3/6 kg, min 20 gr) and Bizerba labeller GH both with serial number: 1713392 Ulma data: electrical power 1.2kw, 400V voltage, frequency 50/60 Hz and consumption of 5A. Technical characteristics: Fpodpjuiq Dbjfx Ak Ujl Reduced space required. Fully automatic operation. Semi-automatic coil change. Packaging with PVC, Polyethylene and Polyolefin films. Anticorrosive construction. High wrapping quality with minimum film consumption. Wrapping of products without tray. Approved according to E.C. regulations. packaging machinery. It is the ideal choice for the different food sections of small and medium-sized points of sale where, integrated with manual weighing and labelling systems, a significant speed and production rate are required, while maintaining small dimensions and ease of use. IMPORTANT: The machine is sold in a non-functional state, with no knowledge of the eventual error. The buyer should repair it or use it as a spare parts donor. Price Euro 1,900 Euro + VAT, FCA: Oradea / Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Year of construction: 2016, operating hours: 60,000 h, functionality: fully functional, machine/vehicle number: GACA FP071.1H_27 -FN and GACA FP 071.1H_37 FN, overall weight: 443 kg, total length: 4,820 mm, total height: 970 mm, total width: 865 mm, lamellar spacing: 7 mm, volume flow: 39,600 m³/h, cooling capacity: 27 kW (36.71 HP), operating pressure: 16 bar, Use glycol coolers . Worked in logistic vegetable and fruits wharehouse. Also is possible use area heating as convectors using hot-warm glycol received from refrigeration system. 3 fans cooler have 27kW capacity glycol in -5C out-2C. 2fans cooler have 22.7kW capacity with glycol in -5C out -2C Fpodpfozk D Rlox Ak Uel Selling 4pcs coolers with 3 fans and 5pcs coolers with 2 fans

Year of construction: 1999, condition: used, functionality: fully functional, We are offering this used CMC Cevenini ET7 roll slitting machine, manufactured in 1999, for sale. The machine has been fitted with a new control system and is in good used condition. Only the compressed air hoses should be replaced when the opportunity arises. Fpodpfxozzq E Rs Ak Usl The machine is currently out of operation and is being sold due to a new acquisition and space constraints. It is ideal for beginners who are looking for a reliable machine in the adhesive tape or film segment. It is also excellent as a core cutting machine. The price is negotiable. We welcome suggestions. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1992, Lippert rising falling Incline belt conveyor GF 720+11450+850-750-600 RA2263 Technical data: Conveyor length (NL): 13020 mm ( 850 mm forerun + 11450 mm ascending belt + 720 mm top bend ) frame width (NB): 750 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 105 mm, 430 mm with motor Angle: 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Fedpfx Aortalnsk Uspl Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: ready for operation (used), Year of construction: 2022, Baling press for waste paper, paper, film, plastic, and other recyclable organic materials. Manufacturer: HSM Model: V-Press 825 plus pro - TCS system (TorsionControlSystem) – platen parallelism control - Automatic start/stop when doors are closed - Display + bale and operating hours counter - Manual tie-off (4 polyester straps) - Sliding door with handwheel locking mechanism Machine dimensions: 1700 x 1250 mm, height: 2370 mm Loading aperture: 1195 x 540 mm Bale weight: up to approx. 280 kg Bale dimensions: approx. 1200 × 780 × 700 mm Throughput: approx. 2–5 bales/h Year of manufacture: 2022 Fpsdpoyyy Dpjfx Ak Uol Pressing force: 250 kN Motor power: 4.0 kW Machine weight: 1200 kg

Year of construction: 2018, condition: used, Two-side evaporator Guntner -Type: S-GBK 050.2B/47-EW.E -Cooling capacity: 40 kW at DT 10K (0°C), 35 kW at DT 9K (-2°C) -Fin spinning: 7 mm -Fans: 4 x 500 mm -Dimensions: 5500 x 1100 x 660 mm -Stainless steel housing and block -Electric defrost -Year of production: 2018 -Volume: 37.4 L -Quantity in stock: 1 -Reference number: CH 574 Fodpfx Akoxpuv As Ujpl -Condition: Used in good condition, evaporator 100% tight, fans working, ready to work