Used Falling Film Evaporators for sale (1,952)

Condition: good (used), Year of construction: 1990, type of input current: three-phase, Film wrapping machine + shrink tunnel KUPER DUPLEX 2100/650 + KUPER ST/I-1400 Film wrapping machine Manufacturer: Kuper Type: DUPLEX 2100/650 Year of manufacture: 1995 Film roll width at the top: 2000 mm Film roll width at the bottom: 2000 mm Packaged goods height (passage height): 650 mm Film roll diameter: 400 mm Compressed air: min 5 bar Compressed air consumption (per cycle): approx. 16 L swing arm with chain lift seal bar length 2100 mm "Siemens" control panel overall dimensions: 3000x2000x2300 mm Shrink tunnel: Manufacturer: Kuper ST/I-1400 year of manufacture: ca 1988 max capacity: width: 1350mm height: 650mm work length: 3000mm 2 pcs centrifugal fan blow-off units heating power: 59 kW temperature range 230 °C endless conveyor belt throughput speed 5 m/min Length: 3500 mm Width: 2350 mm Height: 1850 mm Ijdpjkn Rz Hjfx Ah Nsal

Condition: like new (used), Year of construction: 2018, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 3200 0088, overall weight: 2,000 kg, total length: 7,300 mm, total width: 1,100 mm, total height: 2,000 mm, input voltage: 400 V, input current: 125 A, type of input current: three-phase, input frequency: 50 Hz, cooling capacity: 30 kW (40.79 HP), operating speed: 83 mm/s, Manufacturer IBT.InfraBioTech GmbH Art.-No. 3200 0088 Technical Data Condition: As new; little used from test series Functionality: Fully functional Year of manufacture: 2018 Connected load: 58 kW Cooling capacity, water connection on-site: 30 kW Conveyor belt length: 7,000 mm Conveyor belt width: 310 mm Infeed height: 55 mm Infeed width: 308 mm TECHNICAL DETAILS Application: Conveyor oven for curing in film bonding technology Iasdpfx Ahewnm Uke Nol Component temperature: max. 100°C Stainless steel housing (LxWxH): 7,300 x 1,100 x 1,680 mm Overall height without control cabinet: 2,000 mm Control cabinet (WxDxH): 1,200 x 600 x 2,100 mm Base frame made of stainless steel profile tube, height adjustable: ± 30 mm Conveying system Vacuum conveyor belt made of silicone, belt 310 mm wide Transport speed: max. 5 m/min Conveyor belt height: 950 mm ± 30 mm Belt infeed/outfeed openings (WxH): 308 x 35 mm Free area infeed: approx. 750 mm Free area outfeed: approx. 750 mm Conveyor belt operation: Continuous operation, adjustable up to max. 5 m/min, tracking regulation with light barrier safety system at infeed and outfeed. Loading and unloading are performed manually. Intended use The curing oven is a belt system for continuous operation with a feed speed of max. 5 m/min. Open areas at the infeed and outfeed sections are provided for loading and unloading components. The enclosed heating section houses 6 IR modules (height adjustable). The maximum component temperature is 100°C and serves to heat solvent-free adhesive between composite film layers. The return side of the belt, the rear sides of the IR modules, and the space above the heating modules are water-cooled. Components are held onto the conveyor belt by vacuum. The control cabinet is located separately from the machine outside the cleanroom. The system operates in a cleanroom according to EN ISO 14644 Class 8 and is loaded and unloaded by the operator. The equipment is exclusively for the warming of film composites. Features - 6 adjustable infrared heating modules, each with 6 infrared emitters - 6 pyrometers for precise temperature control - PU conveyor belt for efficient material flow - Integrated control and regulation system - Height-adjustable stainless steel base frame - Vacuum conveyor belt - Cooling water distribution in the base frame (G1") - Water cooling for the belt return section and rear sides of IR modules - Mechanically lockable service doors - Operator panel mounted at the infeed on the left side - Control cabinet cooling unit, water connection on-site History This oven was intended for use in a cleanroom environment and was only used briefly for a test series. The oven was used for curing solvent-free adhesives between composite film layers.

Condition: used, - Dimensions (L x l x H) : 750 x 1520 x 1430 mm - Année : 2006 - -Numéro de série : 1992 -Hauteur d'alimentation depuis le sol : 830 mm - Cadre de scellage - Bras longitudinal : 390 mm - Cadre de scellage - Bras transversal : 490 mm - Niveau sonore : 60 dB - Consommation électrique en veille (mode éco) : 0,3 kW/h - Consommation électrique pour 150 paquets/heure : 1,5 kW/h - Hauteur maximale des consommables : 180 mm - Poids maximal des consommables : 10 kg - Diamètre maximal des bobines de consommables : 260 mm - Largeur maximale des bobines de consommables : 550 mm - Films compatibles avec les consommables : PVC, polyoléfine - Tension : 230 V AVANTAGES - 2 modes de fonctionnement disponibles en standard - Vitesse variable : avant/arrière ou continue - Éléments chauffants blindés - Disposés en cercle autour du ventilateur pour un retrait uniforme - Ventilation puissante et équilibrée - Iajdpfx Aexqfy Ush Nel Assure un transfert de chaleur efficace vers le film, permettant un retrait de tous les films à une température plus basse et avec un temps d'exposition plus court - Réglage simultané - Réglage simultané de la hauteur de la table de déchargement et du convoyeur tunnel en fonction de la taille du paquet : aucune différence de hauteur, meilleur retrait et économies d'énergie - Silencieux - Moteur électrique temporisé de dernière génération à faible niveau sonore - ÉQUIPEMENT - Le paquet est placé sur une plaque de transfert fixe - 2 électroaimants maintiennent le cadre pendant l'opération de scellage - À la fin du scellage, l'opérateur pousse le paquet sur le convoyeur tunnel, qui se déplace à vitesse variable - Le paquet traverse le tunnel jusqu'à la sortie - Caractéristiques conçues pour le confort de l'opérateur et l'ergonomie du poste de travail - Profondeur du support de film et table d'alimentation réglables - 2 modes de fonctionnement disponibles en standard : AVANT/ARRIÈRE ou CONTINU à VITESSE VARIABLE - Réglage de la hauteur du tunnel Convoyeur à bande - Bac de récupération des films usagés - Unité mobile sur roulettes - Dispositif de scellage à chaleur permanente et impulsion réglable - Thermostat électronique contrôlant la température du tunnel à +/- 2 °C - Chauffage et ventilation temporisés du tunnel - Bande transporteuse en maille téflonnée avec guide, maille 5 x 5 mm, vitesse réglable par variateur de fréquence - Hauteur du convoyeur à bande réglable par volant pour un retrait optimal (sans différence de hauteur) Cette annonce a été traduite automatiquement. Des erreurs de traduction sont possibles.

Year of construction: 2023, condition: refurbished (used), SFV/800 Shrink Film Wrapping Machine Overhauled 2023 Iodein Nnkopfx Ah Noal Workpiece length min. 1000 mm Maximum workpiece length 6300 mm width maximum 290 mm Height maximum 180 mm Speed 15-60 m/min at maximum film thickness 40 μ Film width maximum 970 mm The position of the film from above Film thickness from 25 μ Heating elements - radiators Power 15-24 kW Weight 1900 kg Length of the shrink tunnel 3500 mm Electrical control - Siemens CPU S7-1500

Condition: used, Year of construction: 2016, functionality: fully functional, Pratika 56-T that has been standing still for the last 5 years. Ijdpfjxpq Hksx Ah Njal

Condition: ready for operation (used), A 3-side sealing packaging machine Beck is available. Processing materials: recyclable mono films/recycled material/bio film, product width range: 20mm-400mm, max. product height: 200mm, max. packaging capacity: 60cycles/min. Including beck heat shrink tunnel. Documentation available. An on-site inspection is possible by appointment. Iasdpfxexn Aamj Ah Nel

Condition: used, WIDMANN automatic film unwinder, film unwinder Rewinder and unwinder, unwinder, rewinder, winding machine, roll winding machine, roll unwinding machine Unwinder with deflection rollers and film guide system Unwinder with deflection rollers for constant strap tension Year of construction approx. 2000 Ijdoud U Sfspfx Ah Njal Roll width - coil width max. 400 mm Material width max. 400 mm Deflection rollers Ø 80 mm Deflection roller width 430 mm Roll weight - coil weight max. 150 kg Expansion shaft for cardboard core with inner diameter Ø 76 mm (inner coil diameter) Roll outer diameter - coil outer diameter max. 600 mm Interference circle with rotation of the film reel max. Ø 800 mm Reel shaft speed approx. 70 rpm Motor power - drive of the film reel 0.37 kW Mains connection 400 Volt, 50 Hz - Constant belt tension, winding tension via film accumulator with deflection rollers and vacuum shaft - Pick-up shaft with chuck for large rolls with cardboard core inner Ø 76 mm - 8 deflection rollers for film accumulator with constant winding tension, bearing via precise linear guide - Gear motor LENZE with brake to drive the film roll (0.37 kW) - Electrical system not ready for operation, see pictures Space requirement L x W x H approx. 1000 x 1000 x 1900 mm net weight 360 kg good condition

Year of construction: 2011, condition: good (used), The extrusion line No. 1 was designed for cast film production. Processing of thermo plastics in a temperature range of 150-300°C. POSSIBLE LAYER STRUCTURES: - mono film
 - 3- layer (A-B+C-A) - 5- layer (A-B-C-B-A) DATA OF FACILITY Total output of extruders max. 2230 kg/h Extruder A: 90/33 L/D max. 330 kg/h Extruder B.: 135/33 L/D max. 950 kg/h Extruder C.: 135/33 L/D max. 950 kg/h Film width range (net): 1600 - 2110 mm Two rolls cutting possible (2x 800 – 2x 1055mm) Thickness range: 25-580μm Production speed: 10 - 150m/min Roll width: 2500 mm Max. roll weight: 2000kg ADDITIONAL COMPONENTS (QUALITY): Non-contact thickness equipment for automatic TD profile measurement with double side corona treatment (max. 12000W) Optical inspection system, including marker system if failures are detected, incident and transmitted light system INFRA STRUCTURE (ADDITIONAL UNITS): Dryer 1 – 4 with 4500-liter volume; heating capacity 48kw
 Dryer 5 with 2500-liter volume; heating capacity 20kw
 Dryer 6 with 1500-liter volume; heating capacity 15kw
 Each extruder has a gravimetrical batch-dosing unit with 3 stations. Each extruder has a melting pump and a 2-piston filter change system. MAIN LINE COMPONENTS MANUFACTURERS: SML: extruder; Chair, rollers, winding device GWK: cooling extruder KREYENBORG: screen changer Cloeren: feed block, slot die PIOVAN: dryer, dosing device SERVE: Edge band cutting device MATHO: suction Iodpfx Ajpah U Tjh Njal RAPID: Edge strip shredder KONGSHILDE: Recyling edge strips, start rollers INFSTAUB: filling station SMK: chillers SIEMENS: control OCS: camera system SEMET: labeling system AFS: Corona Sation BETA CONTROLL: Radiometric thickness measurement SML: autom. FYLING SPLICE winding unit, BECKOFF control SIMCO: antistatic ALTEK: automatic roll manipulator (transfer carriage)

Condition: used, Year of construction: 2003, Used Shrink Wrapper Tetra Pak year 2003 1200 bundles/hour The Used Shrink Wrapper Tetra Pak year 2003 1200 bundles/hour shrink-wraps products efficiently. Consequently, its fully automated structure and production capacity of 1200 bundles per hour ensure high performance. Iaedov Ew Iwspfx Ah Nsl Technical and Functional Specifications The Used Shrink Wrapper Tetra Pak year 2003 1200 bundles/hour operates with a continuous motion system, thereby maintaining a steady production flow without interruptions. Moreover, the wrapping process applies shrink film, effectively packaging bottles, cartons, and other containers. In addition, the system supports high-speed production lines, thus minimizing downtime and optimizing operational efficiency. Furthermore, the machine incorporates a straight inline feed system, which allows it to adapt to different conveyor speeds while integrating seamlessly with other machinery in the bottling line. As a result, this configuration simplifies integration into existing plants without requiring complex structural modifications. Shrink Film Characteristics In particular, the Used Shrink Wrapper Tetra Pak  applies standard shrink film, thereby eliminating the need for printed film support. As a consequence, this design increases flexibility in packaging material selection and significantly reduces operating costs. Therefore, the machine remains suitable for diverse industrial applications. Bundling Capability Notably, the bundling system of the Used Shrink Wrapper Tetra Pak creates packs with or without trays, depending on the chosen configuration. Additionally, the machine accommodates various container formats, including bottles, bricks, and cartons, thereby providing high flexibility in production management. Since it runs at 20 bundles per minute, the system efficiently delivers 1200 bundles per hour, making it an excellent choice for high-production plants aiming to optimize workflow. Consequently, businesses can enhance their operational throughput significantly. Shrink Tunnel The Used Shrink Wrapper Tetra Pak includes a high-efficiency shrink tunnel, which ensures uniform sealing and tightening of the film around the bundle. Additionally, the system regulates temperature control, thereby guaranteeing optimal shrinkage without damaging packaged products. As a result, this feature preserves packaging quality and minimizes production waste effectively. Operating Conditions and Safety of the Used Shrink Wrapper Tetra Pak At present, the Used Shrink Wrapper Tetra Pak year 2003 1200 bundles/hour remains in storage condition, thus making it ready for reinstallation and operation. Furthermore, the system incorporates safety devices that protect operators during use, thereby minimizing accident risks and ensuring compliance with industrial regulations. Manufactured in 2003, the Used Shrink Wrapper Tetra Pak continues to provide an efficient, robust, and easily integrable packaging system. Moreover, its modular structure and compatibility with various packaging materials make it a versatile solution for multiple sectors in the food and beverage industry. Ultimately, this machine enables companies to optimize their packaging operations while maintaining high standards of safety and efficiency

Condition: good (used), AUTOMATIC PACKER CMB EBC-150/70 + SECOND-HAND BUBBLE PLACEMENT SYSTEM Isdpfx Aorlnlwsh Njal TECHNICAL FEATURES Motor power 2,60 Kw Voltage 380 CE Yes Crown diameter 1550 mm Front table 2000x1300x900 mm Rear table 2000x1300x900 mm Carpet table Yes Automatic film activation Yes Variable speed drive Yes Crown speed variator Yes Bubble system Yes

Condition: good (used), For sale: Luwa Wiped Film Evaporator – Robust build from 1984 Are you looking for a reliable and durable wiped film evaporator for your production process? This Luwa SMS (Butzbach) unit is an excellent example of Swiss engineering, designed for continuous operation in demanding industrial applications. Technical Specifications: Manufacturer: Luwa SMS GmbH, D-6308 Butzbach Serial number: 4.4948.02 Year of construction: 1984 Tube pressure: max. 6 bar Permissible temperature in tubes: 250 °C Tube volume: 19.4 liters Shell (jacket) pressure: 1.5 bar Shell temperature: 93 °C Iaodpfexgb D Iox Ah Nsl Shell volume: 9.8 liters

Condition: ready for operation (used), An AVT flat film packaging machine including an angled conveyor belt is available. Film type: PE/PP, film width range: 120mm-600mm, film thickness range: 40µm-200µm, machine dimensions X/Y: approx. 1400mm/1400mm, weight: approx. 250kg, control: Siemens. Documentation available. An on-site inspection is possible. Iaodpfexf Iihex Ah Nel

Condition: used, WIDMANN automatic film unwinder, film unwinder Rewinder and unwinder, unwinder, rewinder, winding machine, roll winding machine, roll unwinding machine Unwinder with deflection rollers and film guide system Unwinder with deflection rollers for constant strap tension Year of construction approx. 2000 Roll width - coil width max. 400 mm Material width max. 400 mm Deflection rollers Ø 80 mm Isdpfx Aeu H R Iqeh Noal Deflection roller width 430 mm Roll weight - coil weight max. 150 kg Expansion shaft for cardboard core with inner diameter Ø 76 mm (inner coil diameter) Roll outer diameter - coil outer diameter max. 600 mm Interference circle with rotation of the film reel max. Ø 800 mm Reel shaft speed approx. 70 rpm Motor power - drive of the film roll 0.37 kW Motor power - drive of the flat film into the vacuum shaft 0.25 kW Mains connection 400 Volt, 50 Hz - Constant belt tension, winding tension via film accumulator with deflection rollers and vacuum shaft - Pick-up shaft with chuck for large rolls with cardboard core inner Ø 76 mm - 8 deflection rollers for film accumulator with constant winding tension, bearing via precise linear guide - LENZE geared motor with brake to drive the film roll (0.37 kW) - LENZE geared motor with brake to drive the flat film into the vacuum shaft (0.25 kW) Space requirement L x W x H 1900 x 1300 x 1900 mm net weight 580 kg Good condition

Condition: excellent (used), Year of construction: 2004, T-Die Serial No.: L 1081-041391 // Calender Serial No.: F 1201-041392 Haul-Off Serial No.: F 1201-041392-T Max. winder speed: 50 m/min Type: Film system 1080 mm usable width Equipment / Additional information: Max. gross output PP up to 1000kg/h with film width up to 1200mm A special feature is the winding system, which can cut narrow films (150 mm - 100 mm) or for example 8 x 175 mm or even 2 x 700 mm one nozzle lip with a max. film thickness of 2mm up to 1000kg/h. Total power consumption: 211 kW/h Main engine power: 250 kW Min. 068 mm film thickness in PS / min. 0.75 mm in PP Maximum calender speed: Max. 50 m/min. mechanically possible Consists of: -Dosing system 5-chamber Maguire -Extruder (160 mm screw) Amut EA 160 // Age: 2003 -Screen changer (for cleaning in food production) Iaodpfx Asw Tbr Hoh Nsl -Melt pump -Slot die (1 insert) 120 cm -Lip with max. film thickness up to 2mm up to 1000kg/h -Calender 140 cm -Thickness gauge SBI TMD-EC/140.20.200.R -Post-cooling rollers (4 pcs.) -Winder (Film jam during roll jam) -Cutting machine & film tensioner -Film winders (3 pcs.) -Mill MAZZA CBS 25 40 2T18 // Age 2003 Fully existing infrastructure; control cabinets, pumps, etc.

Condition: new, Year of construction: 2025, functionality: fully functional, power: 198 kW (269.20 HP), Plastic squeeze dryers / Agglomerators are a vital part of plastic film washing lines. Washed films retain up to 40% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer/Agglomerator is a must to dehydrate the washed film and increase the density of recycled film and fibre material. This also will increase the capacity of the extrusion process and further refine the quality of final plastic pellets. Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would be uneconomic to agglomerate on a conventional batch agglomerator. By redusing the moisture so significantly the productivity of the extruder and quality of pellets is increased exponentially. The latest development for drying and simultaneously agglomerating washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the resultant squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying where materials are still in lightweight flake form, and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids on entry to the dryer, to output dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders saving more energy, as the materials are so dry and dense they can be fed direct to extruders for pellet production. With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour. Iedewg Sgcjpfx Ah Noal

Year of construction: 2010, condition: ready for operation (used), The device is 100% functional after servicing. It is used for pulling film remnants from packaging machines. Iaedpsxdvq Djfx Ah Nsl

Condition: as good as new (ex-display), This type of semi-automatic machine allows the application of a removable self-adhesive protective film on delicate surfaces and is therefore particularly suitable for painting and panel packaging processes. The film is applied to the panel without debonding, the application of the film can be adjusted more or less long. Iajdpfx Ahoru A Raj Nsl The machine is suitable for panel masking, to avoid overspry in painting, thus avoiding long and costly manual protection. Suitable for medium production or small batches. Useful working width 1300 mm.

Year of construction: 2008, condition: like new (used), We sell a package of 26 cooling systems - Alfa Laval brand evaporators, all of which work on the glycol cooling system. The systems are powered at 220V or 380V or have an interchangeable power supply system according to the user's needs. The year of manufacture of the systems is 2008. We can sell also piece by piece not only as a package upon request. Commercial unit coolers designed for use in small and medium cold rooms from 10 up to 400 m³. Models designed for easy maintenance with immediate access to inspection areas. This series is available as a DX evaporator and brine unit cooler. Finned coil - H(C)FC Inner grooved Cu tubing ø 12 mm, triangular tube pitch - Brine Smooth Cu tubing ø 12 mm, triangular tube pitch - Corrugated Alu-fins - Fin spacings 4, 5.5, 6, 7, 8, 10 and 11 mm. • 1 to 4 AC fans, ø 250 mm up to ø 500 mm, drawing through the coil. Fan motors 230V/50-60Hz/1ph or 400V/50-60Hz/3ph in two noise levels (H/L). Motors with dynamically and statically balanced external rotors, manufactured in accordance with VDE 0530/12.84. • Corrosion resistant materials: coil frame AluZinc, casing strong and durable sheet metal, powder-coated RAL 9002. • Hinged drip tray and side covers for easy installation and maintenance. • Sufficient space for mounting of expansion valve inside the casing. • Mounting brackets allow flush ceiling mounting. • Fitted with schräder valve on the suction connection for testing purposes. • Pumped system available on request. • Stickers indicate fan direction and refrigerant in/out. • Delivery in mounting position. Coolers are mounted on wooden beams. Installation can take place with the use of a forklift. 1 AlfaCubic series (BL, GL, RL) 2 Refrigerant system (E = dry expansion, W=water/glycol, 3 Noise level (H=high, L=low) 4 Fan diameter (25=250, 35=350, 40=400, 50=500 mm) 5 Number of fans (1 to 4) 6 No. of tube rows (A=4, B=6, C=8) 7 Phases (S= single-phase, D= 3 phases Δ connection) 8 Motor voltage (230V, 400V) Iaodpsg N Db Hefx Ah Nsl 9 No. of circuits 10 Packing (CR=crate) 11 Casing material (AP= powder coated, SS= stainless steel) 12 Defrost system (A= air, E= electric defrost, HG= hotgas) 13 Fin material/coating (AL=aluminium, EP= epoxy coated aluminium) 14 Fin spacing (4, 5.5, 6, 7, 8, 10 and 11 mm) 15 Tube material (Cu=copper) The evaporator coils of these units are high performance and are built-in 1/2 ”fluted copper tube and fin corrugated aluminium with gaps of 3.5, 6 and 8mm. The frame, made of aluminium sheet, is provided with protection collars. This frame has the application of thermostatic expansion valves. Regarding their exterior structure, they are manufactured in aluminium painted in high resistance RAL-9018 polyester colour. The vibrations in these machines are avoided thanks to the fact that their entire structure is compact and highly rigid. All its parts are easily removable for maintenance. These evaporators are fitted as standard with helical fans with high-performance protection grilles and are equipped with 315 or 350mm motors. diameter. Single-phase for 230V 50Hz, with a degree of protection IP-54, with external rotor and low consumption. All motors are connected to a watertight general box, according to IP-55 regulations. Finally, defrosting is carried out with 230V electric heaters built in armoured stainless steel tubes. Its vulcanized ends avoid derivations and are inserted inside the battery and the tray. They are connected to a watertight junction box. Application: Lo

Condition: used, Falling Ball Viscometer like Thermo HAAKE Type C THERMO ELECTRONIC CORPORATION Type 002-7580 Serial No.: With the Thermo falling ball viscometer, you can measure viscosity precisely without electricity, using only a stopwatch. It allows for accurate measurement of the viscosity of transparent Newtonian liquids and gases. Measuring principle: A ball moves by rolling and sliding inside an inclined cylindrical tube filled with the liquid to be tested. The time it takes for the ball to travel a defined measuring distance is recorded. By swiveling the measuring section, the return movement of the ball can also be used for measurement. The result is displayed as dynamic viscosity in mPa·s. Max. viscosity: 100,000 mPa·s Min. viscosity: 0.5 mPa·s Standards: DIN 53015, ISO 12058 Reproducibility: < 0.5% Thermometer: -1 °C to +26 °C (read-out accuracy 0.1 °C) Ball set Type 800-0182 with 6 balls (balls 1 and 2 made of borosilicate glass; balls 3, 4, 5 and 6 made of nickel-iron alloy) Recommended for: Chemical industry (polymer solutions, solvents, printing inks) Pharmaceutical industry (raw materials, glycerin) Mineral oil industry (oils, liquid hydrocarbons) Iodpfx Asxcbnrsh Neal - Inner glass tube (falling tube) damaged on one side at the screw socket (see images). Replacement part no. 002-6968 Dimensions of inner tube: outer diameter 20 mm; inner diameter 16 mm; wall thickness 2 mm; length 225 mm Dimensions (W x H x D): 170 x 310 x 220 mm Weight: 3.5 kg

Condition: new, Year of construction: 2025, Machine to close (seal with film onto the edge of bottles, glases, cans, etc.) container with a neck diameter of 30-90 mm. Working direction: from left to right. - Specifications: max. speed of the machine in neutral: 40 cycles/minute; 380V, 2.0kW; Machine dimensions: L1600xW800xH1160mm; weight: 180kg. Iajdpfx Aov Nk Tboh Nel Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2015, condition: excellent (used), The Cyklop CST 940 is a fully automatic stretch wrapping machine that ensures fast and reliable pallet wrapping at high volumes. Beneath the casing is an Atlanta Stretch Mytho A – a model renowned for its robust construction and dependable operation. With a capacity of up to 45 pallets per hour, it is an excellent choice for logistics centers, warehouses, and production facilities seeking to combine efficiency with operational reliability. Thanks to its minimal use and pristine condition, the machine gives the impression of being brand new, but comes at the price of a pre-owned unit. Operation is simple via a user-friendly 5.7” touchscreen featuring multiple program selections, and the machine can be customized for different load formats and wrapping requirements. With adjustable speeds for both the rotary arm and film carriage, as well as various pre-stretch levels, a flexible solution is created, delivering high performance and secure, stable packaging. The solution can be adapted and extended upon request, as additional conveyor sections of the same model can be offered. Compressed air required. Freight and installation, if applicable, are not included. Iaodow U Rd Uepfx Ah Nel

Year of construction: 1999, condition: defective spare-parts repository (used), functionality: limited functionality, machine/vehicle number: 2200268., We sell an automatic packaging machine (stretch film packaging machine, tray packaging machine ), ULMA model COMPACT, MFG 1999, SN: 2200268. Packaging for trays with stretch film including Bizerba scale type: 18-A (max 3/6 kg, min 20 gr) and Bizerba labeller GH both with serial number: 1713392 Ulma data: electrical power 1.2kw, 400V voltage, frequency 50/60 Hz and consumption of 5A. Technical characteristics: Reduced space required. Fully automatic operation. Semi-automatic coil change. Packaging with PVC, Polyethylene and Polyolefin films. Anticorrosive construction. High wrapping quality with minimum film consumption. Wrapping of products without tray. Approved according to E.C. regulations. packaging machinery. It is the ideal choice for the different food sections of small and medium-sized points of sale where, integrated with manual weighing and labelling systems, a significant speed and production rate are required, while maintaining small dimensions and ease of use. IMPORTANT: Iaedpfxeuiq Dbj Ah Nsl The machine is sold in a non-functional state, with no knowledge of the eventual error. The buyer should repair it or use it as a spare parts donor. Price Euro 1,900 Euro + VAT, FCA: Oradea / Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: new, Year of construction: 2025, Fully automatic and efficient packaging process realizable by AMTEC’s speed shrink Complete System 35M. That system includes: Shrink Wrapper speed shrink 35M (vertical), SHRINKtunnel-POF-M (high speed ), infeed and outfeed conveyors. Features and specifications of the shrink wrapper: M-version of vertically working L-bar shrink wrapper. The sealing unit uses 4 pillars to work vertically in a very stable way with very even pressure on the shrink film. Provides excellent sealing effect with minimized wrinkle effect. The sealing frame height and sealing stroke can be modified. Easy adjustable perforation location. Optional available: infeed systems for CD, DVD, etc. - Specifications: max. speed of the machine in neutral: 35 cycles/minute; packing sizes: (L + H) max. 500mm provided that H < 180mm and (W + H) max. 400mm provided that H < 180mm; length of sealing blades: horizontal = 623mm, vertical = 550mm; power: 220V/2.8kW; machine dimensions: L1850xW1350xH1300mm; weight: 800kg. - Specifications of the shrink tunnel: high speed shrinking with 0-20m/min for POF (Polyolefin) film; max. packaging size: W400xH250; tunnel size: L1500xW500xH300mm; power: 380V, max. 16kW; machine dimensions: L1800xW990xH1300mm; weight: 650kg. Dimensions of infeed and outfeed conveyors: L1000mmxW450mm each. Total dimensions LxWxH: approx. 5650x1350x1300mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Iodpov Nl A Refx Ah Njal

Condition: new, Year of construction: 2025, Fully automatic and efficient packaging process realizable by AMTEC’s speed shrink Complete System 35L. That system includes: Shrink Wrapper speed shrink 35L (vertical), SHRINKtunnel-POF-L (high speed ), infeed and outfeed conveyors. Features and specifications of the shrink wrapper: L-version of vertically working L-bar shrink wrapper. The sealing unit uses 4 pillars to work vertically in a very stable way with very even pressure on the shrink film. Provides excellent sealing effect with minimized wrinkle effect. The sealing frame height and sealing stroke can be modified. Easy adjustable perforation location. Optional available: infeed systems for CD, DVD, etc. - Specifications: max. speed of the machine in neutral: 35 cycles/minute; packing sizes: (L + H) max. 600mm provided that H < 180mm and (W + H) max. 500mm provided that H < 180mm; length of sealing blades: horizontal = 703mm, vertical = 550mm; power: 220V/3.2kW; machine dimensions: L2015xW1470xH1300mm; weight: 850kg. Specifications of the shrink tunnel: high speed shrinking with 0-20 m/min for POF (Polyolefin) film; max. packaging size: W550xH250; tunnel size: L1500xW650xH300mm; power: 380V, max. 18kW; machine dimensions: L1800xW1140xH1300mm; weight: 700kg. Dimensions of infeed and outfeed conveyors: L1000mmxW600mm each. Total dimensions LxWxH: approx. 5815x1470x1300mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Iaedpjv Nl Dbjfx Ah Nsl

Condition: new, Year of construction: 2025, Fully automatic and efficient packaging process realizable by AMTEC’s speed shrink Complete System 35XL. That system includes: Shrink Wrapper speed shrink 35XL (vertical), SHRINKtunnel-POF-XL (high speed ), infeed and outfeed conveyors. Features and specifications of the shrink wrapper: XL-version of vertically working L-bar shrink wrapper. The sealing unit uses 4 pillars to work vertically in a very stable way with very even pressure on the shrink film. Provides excellent sealing effect with minimized wrinkle effect. The sealing frame height and sealing stroke can be modified. Easy adjustable perforation location. Optional available: infeed systems for CD, DVD, etc. - Specifications: max. speed of the machine in neutral: 35 cycles/minute; packing sizes: (L + H) max. 800mm provided that H < 180mm and (W + H) max. 650mm provided that H < 180mm; max. length of sealing blades: horizontal = 903mm, vertical = 750mm; power: 220V/3.5kW; machine dimensions: L2430xW1550xH1300mm; weight: 930kg. Specifications of the shrink tunnel: high speed shrinking with 0-20 m/min for POF (Polyolefin) film; max. packaging size: W700xH250; tunnel size: L1500xW800xH300mm; power: 380V, max. 20kW; machine dimensions: L1800xW1290xH1300mm; weight: 750kg. Dimensions of infeed and outfeed conveyors: L1000mmxW800mm each. Total dimensions LxWxH: approx. 6230x1550x1300mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Iajdpfxov Nl Dhs Ah Nsl