Used Faceplate for sale (639)

Condition: used, faceplate diameter 650 mm Itedpfx Aeykva Hjh Eol hollow 120 mm weight / kg Ø 350 mm Passage: 60 mm

Condition: ready for operation (used), Year of construction: 1987, VTL Stanko 1540 Chuck diameter 4000 mm Max Heigth of piece 2000 mm Max weigth of piece 50 to Main motor 63 kw Iodpjqd Uvfefx Ah Eotl Weigth of machine approx 100 to

Condition: used, Year of construction: 2010, faceplate diameter 500 mm total power requirement 1 kW weight of the machine ca. 1 t Itjdpfx Aovylgweh Eel dimensions of the machine ca. 1 m

Condition: good (used), faceplate, faceplate chuck, four-jaw chuck, facing chuck -Faceplate: chuck size Ø 490 mm -Mounting: Thread M105 x 6 -Bolt circle: mm -Through hole: Ø 126 mm -Groove width: 20 mm -Dimensions: Ø 490 x 185 mm Iodpfxewc Rrpo Ah Ejtl -Weight: 96 kg

Condition: used, Year of construction: 2011, Hankook VTC-160E CNC Ram Type Vertical Turning and Milling Centre with Fanuc 31i-Model A Colour CNC Control, Table dia. 1600mm, Maximum Swing 2000mm, Maximum Turning Dia. 2000mm, Maximum Turning Height 1400mm, Maximum Table Load 10,000kg, Horizontal Travel of Rail Head (X-axis) 1900mm, Vertical Travel of Ram (Z-axis) 900mm, Vertical Travel of Crossrail 700mm, Full C Axis 0.001 Resolution, Milling Spindle 18.5kw, Milling Spindle Speeds 30-3000rpm, Table Speeds. 0.7 to 280rpm (2 Speed Gear Box), Max Table Torque 23800 N.m, Ram Size 220mm x 220mm, Rapid Traverse (X-axis) 7,500mm/min, Rapid Traverse (Z-axis) 7,500mm/min, Cutting Feed Rate 0.001mm to 7500mm/rev, Tool Magazine 24 Station (12 Std + 12 Milling), Main Motor 45kw, Total Machine Power requirement 100KVa, Machine Size 5300mm x 4500mm, Machine Weight 34,000kg, Assorted Tool Holders. S/No. 42D09215 (2011). Country of Origin: Korea Pre-Auction offers Encouraged Itedpfx Aszwnqcsh Esl Location: These lots are located in Oldbury, West Midlands, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 1977, faceplate diameter 2500 mm swing diameter 2700 mm turning height 2000 mm cross rail - adjustment 1500 mm workpiece weight max. 20.000 kg total power requirement 71 kW Control Siemens Sinumerik 840 Itedpjuddpgsfx Ah Esl Single-column vertical lathe 2000 x 2000mm Retrofit: 1997 Gr. turning diameter: 2700mm Gr. distance f. face plate to bottom of toolholder: 2150mm chisel holder: 2150mm Support swivelling up to 30° Chisel cross-section: 240x240mm small plunging diameter: 300mm Special equipment: Re-moulding, taper turning, thread cutting, constant cutting speed

Condition: used, diameter 400 mm hollow ca. 75 mm Itodpfxoy Suuyj Ah Esl chuck width / mm weight 30 kg Face plate four-jaw chuck Diameter: Ø400 mm Weight: 30kg Clearance: approx. 75 mm

Condition: excellent (used), Faceplate diameter 800 mm Spindle mount DIN 55027 - size 11 Including new one-piece clamping jaws! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 Itodpfswxty Ujx Ah Eel DE - 44143 Dortmund - Wambel

Condition: used, diameter 600 mm hollow ca. 95 mm chuck width 125 mm Iedpfx Ajy Sunyoh Eetl weight / kg Face plate four-jaw chuck without chuck jaws Diameter: Ø600mm Chuck width: 125mm Passage: approx. 95 mm

Condition: used, diameter 450 mm hollow ca. 60 mm chuck width / mm Isdpfxjy Sunae Ah Eetl weight 50 kg Face plate four-jaw chuck Diameter: Ø450mm Weight: 50kg Passage: approx. 60 mm

Condition: ready for operation (used), Year of construction: 1986, Available immediately from a workshop for disabled people: L & Z lathe, Imatec Type ID 175 Year of manufacture 1986 Center height 175 mm Diameter over bed 350 mm Diameter over carriage 210 mm Distance between centers 1000 mm Spindle bore 41 mm Spindle speeds 35.5 – 1600 rpm Digital display Chuck Faceplate Multifix with holders Coolant system Drive power 3 kW Weight 1700 kg Price: EUR 1,750.00 plus VAT, ex works. Itsdpezyggujfx Ah Ejl

Condition: good (used), Year of construction: 1965, functionality: fully functional, Turning length/centre distance: 4m, spindle bore diameter, faceplate D 1000 mm, centre height over carriage 360 mm, 2 steady rests with roller jaw guides retrofitted in 1980, main spindle speed 215 - 355 rpm. Operating manual with wiring diagram, chip guard, quick-change toolholder, carriages recently overhauled, electric control box, weight approx. 15 t. Inspection possible under power, including test run. Iodpsy Ehntsfx Ah Eotl

Condition: used, TECHNICAL DETAILS - Number of axes : 2 - Number of turrets : 1 - Max. turning diameter : 220 [mm] Iodsxc N I Tspfx Ah Eetl - Maximum workpiece height : 175 [mm] - X/Z stroke : 660/300 [mm] MAIN SPINDLE - Spindle speeds : 4500 [rpm] - Spindle power : 27 [kW] - C axis indexing precision : 0.001 [°] TURRET - Tool type : VDI40 - Number of positions : 12 POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 36 [kW] WEIGHT & DIMENSIONS - Machine floor space : 3120/2266 [mm] - Machine height : 3200 [mm] - Machine weight : 7000 [kg] MACHINE HOURS - Number of hours under power : 74809 [h] - Number of spindle hours : 30521 [h] EQUIPMENT - CNC : Fanuc 32i-A - Interface : Ethernet / RS232 / USB / PCMCIA - Coolant tank - Chips conveyor - Parts conveying strip - Chuck 3 jaws

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Technical details faceplate diameter 1800 mm swing diameter 2000 mm turning height 1270 / 1120 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min cross rail - adjustment 400 mm ram head - cross travel (X) -2770 / +2275 mm ram head - vertical travel (Z) 1250 mm c-axis 360° (0,001°) deg milling drive 37 kW turning speed range - milling 10 - 3000 U/min power capacity - table 100 kW Torque 31784 Nm feed range (X/Z) 0,1 - 15000 mm/min weight of the machine ca. 55 t Additional information Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. The machine was meticulously maintained by the previous owner. It was sold due to a factory closure Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilling and milling spindle: 37 kW Crossbar travel: 2 steps of 200 mm each Total electrical connection value: 218 kVA CNC control: Siemens 840 D Number of NC axes: 4 (X, Z, C, crossbar adjustment) Travels: X-axis: -1650 to + 2165 mm Z-axis: 1250 mm Itodpfszzwgujx Ah Ejl Rapid traverse X- Z-axis: 15 m/min Number of tool magazine spaces: 80 spaces in the chain magazine, of which 60 x HSK 100 and 20 x Capto C6 Disc magazine 12-pos. for rotary holders and attachment heads Coolant system with filter and circulation unit Chip conveyor Oil-mist-extractor 1 pallet with jaws, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 measuring probes Several turning tool holders Special feature: Pallet changer with two stations, equipped with a face plate Ø1800 mm and a six-jaw lever compensation chuck with mechanical centrifugal force compensation Ø1800 mm. Note: The machine is in a pit. Condition description: The cross roller bearing on the Carnaghi was replaced about half a year ago. The Siemens components in the control cabinet were also completely replaced at the end of 2023. The machine also has a measuring probe for tool measurement and an external Renishaw measuring probe for workpiece measurement. As a special feature, the machine also has a measuring probe installed on the Z-axis (Z1-axis). This brings an advantage in terms of accuracy and time, as the tool does not have to be put down for measuring. However, it is currently shut down and should be overhauled when it is put back into operation. The machine also has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, The PR622F4 is a specialized CNC horizontal boring machine developed and manufactured by the St. Petersburg-based TBS Machine Tool Plant. This heavy-duty machine is designed specifically for the needs of railway transport and transport engineering. It is intended for high-precision machining of key and critical rolling stock components. Thanks to specialized equipment, one such complex replaces a production line of 12 obsolete machines. WorkpiecesThe machine is used to process technological and operational surfaces of the following units:Axlebox housings and bolstersHousings, locks and lock holders of automatic couplingsNon-rotating shoes and safety devicesTraction clamps and centering beamsSide frames of freight trolleysDesign featuresHigh precision: the movements of moving units are controlled by precision feedback sensors along the X, Y, Z and W axes.Rigidity and stability: reliable hydraulic clamps ensure that the units are fixed in specified positions.Combined guides: sliding pairs (cast iron-TsAM/fluoron) are used along the X and Y axes together with hardened steel lateral rolling bearings.Precision ball screws: high-quality ball screws are used for smooth and precise linear movement of the units transmission. Rotary table (B axis): equipped with an automated precision stop system at positions 0, 90, 180 and 270 degrees. Protection of units: telescopic covers completely cover the bed guides from chips and dirt. Technological equipment For the implementation of complex technological operations, the PR622F4 machine is supplied with a specialized kit: Hanging faceplate, Hollow spindle extension, Special clamping devices for fixing automatic coupling housings and side frames of bogies, Sets of cutting tools and mandrels for specific parts Itjdpfx Ahozr H T Ee Ejl

Condition: used, Year of construction: 1961, turning diameter Max. 4200 mm Iodpfx Ajuddnvjh Estl faceplate diameter 3700 mm turning height Max. 2600 mm workpiece weight Max. 35 t Power 80 PS DIGITAL CONTROL DISPLAY Largest diameter with the crossbeam supports: 4200mm Largest turning diameter with side support: 3900mm Largest turning height above faceplate: 2500 Side support 1 vertical grinding ram: 1200mm stroke (out of operation) 1 turning ram: 1400mm stroke

Condition: used, Technical details: faceplate diameter: 5000 mm swing diameter: 6100 mm Isdpfx Asw Rz U Ash Eotl turning height: 2400 mm ram stroke each side: 1490 mm ram head dimension: 340 x 340 mm max. workpiece weight: 100.000 kg total power requirement: 100 kW weight of the machine ca.: 155 t faceplate turning speed range: 0,4 - 50 U/min with 2 axes CNC SIEMENS 840 D *

Condition: used, diameter 550 mm hollow ca. 105 mm chuck width 105 mm weight / kg Face plate four-jaw chuck Diameter: Ø550mm Chuck width: 105mm Itjdeykva Tspfx Ah Ejl Passage: approx. 105 mm

Condition: ready for operation (used), Year of construction: 2012, UMARO VTL SC 14 CNC FANUC Oi TC Chuck diameter: 1250 mm Maximum turning length: 1400 mm Maximum workpiece height: 1200 mm Approximate weight: 16.1 tons Iedpfozruqlex Ah Ejtl

Condition: used, diameter 500 mm boring diameter 90 mm Itodjzcq H Sopfx Ah Ejl weight ca. 60 kg Diameter: Ø500mm Passage: 90mm Weight: about 60kg

Condition: used, Technical details: faceplate diameter: 620 mm internal diameter: 160 mm dimensions: 620x160x140 mm weight of the machine approx.: ca. 160 kg 4 jaws faceplate flange intake/diameter : passage drill hole 160 mm flange diameter 197mm hole circle 235mm jaws are single guided with chuck key The given info are approx. values! Itjdpfx Aou Nk Dwsh Esl *

Condition: used, diameter 450 mm Isdpfx Ajzcq Ezoh Eetl boring diameter 100 mm weight ca. 30 kg Diameter: Ø450mm Passage: 100mm Weight: about 30kg

Condition: used, faceplate diameter 635 mm 4-jaws faceplate, h= 104,5 mm, F= 171,4 mm 2 similar available. Price for one faceplate. Iodpfx Aheu Sbfwo Eetl

Condition: used, Year of construction: 1962, faceplate diameter 2250 mm Itodpeuc Aldofx Ah Eol swing diameter 4500 mm turning height 2000 mm turning diameter 3150 mm workpiece weight max. 25000 kg total power requirement 55 kW weight of the machine ca. ca. 32 t required space / m

Condition: used, faceplate diameter 400 mm Iedpfozcq Ngex Ah Eetl hollow 60 mm weight 40 kg Ø 700mm Passage: 135 mm