Used Face Plate for sale (23,706)

Condition: reconditioned (used), functionality: fully functional, Year of construction: 1997, sheet thickness steel (max.): 16 mm, cutting length (max.): 4,000 mm, HYDRAULIC SHEAR LVD MVSB 40/16 Serial number 24159 Yom 1997 TECHNICAL SPECIFICATIONS Max. sheet thickness St45 16 mm Cutting length 4050 mm Distance between uprights 4250 mm Iijdouipu Espfx Afish Range back gauge 1000mm Min. cutting angle 0.5 ° Max. cutting angle 2.0 ° Min. number of strokes/min. 7 Max. number of strokes/min 26 Min. blade clearance 0.5 mm Max. blade clearance 1.6 mm Motor power 22 kW Approx weight 20500 Kg LxWxH 4800x2170x2750mm Accessories included; Electrical adjustment of back gauge 1000mm with Go-to controller blade clearance and cutting angle adjustable. 1 x Front support 1500mm, one with 90° square arm front support 1 x Front support of 1500mm Foot pedal

Condition: good (used), Indexable inserts milling cutter, Sandvik Coromill 200 Diameter 200 mm with packing Iiedoip Dyispfx Afioh

Condition: used, Electro sinus magnetic chuck, sinus magnet, E-sinus magnetic clamping plate BRAILLON type BJP. Length: 350 mm, width: 150 mm, height: 110 mm. Connection: 110 Volt DC. Power: 0.65 Amp. The magnet is tiltable up to 90° and features a sine table base. Net weight: 45.8 kg. Iisdpfx Aexcimcefish

Condition: new, sheet width 2050 mm Iiodpfx Afovdfmxoish plate thickness 3 mm strokes per minute until 35 cutting angle 2,0 ° table height over floor 870 mm thickness at "Niro-steel" 2 mm total power requirement 4 kW weight of the machine ca. 1550 kg range L-W-H 2,5 x 1,57 x 1,21 m The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a Standard geared brake motor via a chain connection to the main axle. the Knives are of the highest quality. The optimal cutting angle secures the Together with the blank holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Right angle stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and emergency stop. • 2 cutting edges per knife. • Rear protective grille, warranty = 12 months for single-shift operation. Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm Machine dealer with own stock of 1600 m².

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, Travel paths Longitudinal movement (X-axis): 5,500 mm Vertical movement (Y-axis): 3,200 mm Spindle movement (Z-axis): 600 mm RAM/Outrigger movement (W-axis): 600 mm Feed rates X, Y, and Z axes: 2,800 mm/min Spindle unit Spindle power: 37 kW Boring spindle diameter: Ø 125 mm Spindle sleeve diameter: Ø 240 mm Spindle taper: SK50 Number of gear stages: 4 Spindle speed range: 3–700 rpm Faceplate diameter: Ø 1,000 mm Faceplate speed range: 1–82 rpm Gear stages Stage I: 3–33 rpm Stage II: 30–85 rpm Stage III: 88–247 rpm Stage IV: 250–700 rpm Connection data Operating voltage: 3 × 400 V Mains frequency: 50 Hz Total connected load: 80 kW Dimensions and weight Machine footprint: approx. 8 × 5 m Total height: approx. 5.5 m Machine weight: approx. 50,000 kg Features and accessories Robust, flat-bed horizontal boring mill in moving column design, in very good condition Retrofit including electrical system in 2014 Refurbished control panel with Heidenhain digital readout Coolant tank with belt filtration system, high and low pressure pumps Counterweight for weight compensation Isdpsxn Al Aofx Afisih Conventional control Thread cutting device with change gears Axis drives via intermediate gearbox Swiveling control panel for operation from the front or rear of the machine Telescopic steel cover for X-axis Scope of delivery excludes foundation plates and rotary table Chip conveyor included in delivery

Condition: good (used), Clamping plate, marking-out, welding table, welding table, straightening plate, marking-out plate, straightening table Iodpfx Aexnxnmjfieih -Clamping plate: on solid base frame -Clamping surface: 2000 x 1515 mm -Table height: 800 mm -Plate thickness: 130 mm -Transport dimensions: 2000/1515/H800 mm -Weight: 3250 kg

Condition: new, Year of construction: 2025, TBS - Manual plate shears Manual plate shears Suitable for cutting mild steel, aluminium, copper, zinc, plastics High quality cutting blades made of steel with a hardness of HRC55-60 Equipped with two operating handles With front support surface with scale and adjustable back gauge 800 mm table height Scope of delivery: 2 operating handles Model TBS 2000-12 Article no. 3746020 Technical data working width max. 2000 mm sheet thickness max. - material tensile strength 400N/qmm 1,25 mm backgauge range 0-300 mm weight 511 kg Iisdecnxc Rspfx Afish Dimension in mm 2450 x 1100 x 1050 mm

Year of construction: 1984, condition: good (used), burnt hydraulic guillotine shear, make LVD, type MVN 25 / 4, year 1984 power 2500 x 4 mm with backgauge with documentation Other accessories: - Conveyor table - Lifting table Iijdpfx Afeihppxsish

Condition: good (used), Very stable cast iron clamping table with 7 T-slots Dimensions : 1000 x 1000 x 840 mm Thickness of the cast plate incl. ribbing at the bottom approx. 130 mm Was probably originally a machine table Iodpfx Afsxnqxkeioih T-slots: opening width at top approx. 25 mm Groove width at bottom approx. 43 mm Sturdy substructure with doors and two shelves Condition : Surface hardly damaged ! Grooves not broken out

Condition: new, Year of construction: 2019, sheet width 2050 mm plate thickness 2 mm strokes per minute until 38 cutting angle 1,75 ° table height over floor 870 mm total power requirement 3 kW Iijdpovn Al Hefx Afish weight of the machine ca. 1520 kg range L-W-H 2,2 x 0,6 x 1,2 m Demo machine at a special price: The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a Standard geared brake motor via a chain connection to the main axle. the Knives are of the highest quality. The optimal cutting angle secures the Together with the blank holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Right angle stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and emergency stop. • 2 cutting edges per knife. • Rear protective grille. Plus freight + packaging 270,--. This is a demonstration machine at a special price, so we are selling it without any warranty. Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm Machine dealer with own stock of 1600 m².

Condition: good (used), Year of construction: 2021, 1 used motorized plate bending roll Manufacturer: Akyapak Model: ASM 140-12/5 Year of manufacture: 2021 Technical specifications Sheet width: 1250 mm Sheet thickness: 5.5 mm Pre-bending: 5.0 mm Roll length: 1280 mm Minimum diameter: 210 mm Top roll diameter: 140 mm Weight: 1365 kg Dimensions (LxWxH): 2,020 x 900 x 1,200 mm Standard equipment: – Central rolls driven by electric motor, planetary gearbox, and gear drive Ijdpfx Asxnpwxjfisih – Side-opening top roll – Main motor with brake system – Cone bending device – Mobile control panel and foot pedal – CE mark / Declaration of Conformity

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table -Clamping plate: on solid base frame -Clamping surface: 2100 x 1200 mm -Table height: 740 mm Iijdpfx Afjxnwbloioh -Plate thickness: 130 mm -Transport dimensions: 2100/1200/H740 mm -Weight: 2400 kg

Year of construction: 2025, condition: new, NEW - - Ideal for removing plates from your Iisdpfx Afsd Tyaasieh standing plate storage. - For in-plant transport of the plates to the standing or lying panel dividing saw. - The steplessly height-adjustable support surface can be exactly to the height of your panel saw. height of your panel saw. - Panels weighing up to max. 250 kg can be transported or transported or swiveled by one operator alone. Technical data: Support height - standing: approx. 120 - 340 mm - lying: approx. 890 - 1200 mm max. plate size: 5200 × 2100 mm load capacity: 250 kg Location: ex stock 54634 Bitburg - immediately available- Will be shipped for 90,- Euro net within Germany

Condition: good (used), Year of construction: 1992, Used guillotine shear, Helmut Lotze, type 205.3000x16, built in 1992 Working width: 3040 mm Isdpewaynbefx Afieih Max. sheet thickness: 16 mm Column width: 3040 mm Thrust: 200 mm Stop width: 1000 mm Motor power: 45 kW Stroke rate: 22/min.

Condition: excellent (used), functionality: fully functional, Year of construction: 1993, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 280 mm, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller diameter: 400 mm, roller length: 4,050 mm, working width: 4,000 mm, working height: 1,100 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 6 mm, overall weight: 11,000 kg, total length: 6,000 mm, total width: 1,450 mm, total height: 1,510 mm, power: 11.03 kW (15.00 HP), input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, hardened rollers, 3 roll 4000x8 mm Plate bending machine with pre-pinch Model Famar CPI4/6 Iijdpfx Afexnmb Ijish CAPACITY plate width 4000 mm plate thickness 8 mm pre-bending 6 mm --- Useful rollers width 4050 mm Top roll d 300 mm Side rollers D 280 mm hardened surface of the 3 rolls position readout of the bending rollers Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on rollers for profile bending Variable speed rolling up to 5 mtr/min power electric motor 15Hp on hydraulic unit 15Hp-Voltage 380/50 safety installations with emergency stop dimension 6000x1450 x H 1510 weight 11 Ton

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, Sahinler round bending machine type IRM 2050x110 working width 2050 mm max sheet thickness 3.0 mm roller diameter 110 mm Iodpfx Afjxnc N Usioih motor driven

Year of construction: 2000, condition: used, Serial number: 33500xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21274 Specifications: Iodpfexatn Eox Afioih Weight: 510 kg 9.5 kW Year: 2000 model Ready for delivery Works as it should Own weight: 510 Model: Vibroplate

Condition: good (used), Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Clamping plate: surface plate with adjustable feet -Length: 2000 mm -Width: 1515 mm Isdpfxjxnv Ikj Afisih -Plate thickness: 130 mm -Adjustable feet: Ø 300 x 670 mm -Transport dimensions: 2000/1515/H430 mm -Weight: 3150 kg

Condition: good (used), Year of construction: 2005, Marking and surface plate 1000 x 1000 with base frame Location: from stock 54634 Bitburg Ijdpfswqx Axox Afieih - available immediately -

Condition: good (used), Year of construction: 1975, Manufacturer: Sagita – Beyeler License Model: 2550 × 10 (Sheet length × Cutting thickness) Cutting length: approx. 2520 mm (effective) Max. cutting thickness (steel): ~10 mm Isdpfx Asw Ecwcefioih Backgauge: approx. 750 mm, motorized adjustment Blade gap adjustment: manually adjustable Space requirements: with table supports: 3,200 × 2,800 × 1,600 mm transport-ready: 3,200 × 2,150 × 1,600 mm Weight: approx. 6,300 kg

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 1873, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 1,250 rpm, spindle diameter: 50 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid commits you to collect the machine on time between 01/12/2025 and 05/12/2025! Isdpfxoxm S N Is Afisih TECHNICAL DETAILS Travel range X-axis: 500 mm Travel range Y-axis: 400 mm Travel range Z-axis: 1,000 mm Max. spindle speed: 1,250 rpm Spindle diameter: 50 mm Table dimensions: 1,550 x 980 mm With T-slots: 6 MACHINE DETAILS Electrical data Operating voltage: 380 V Rated current: 33.1 A Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 4,500 x 1,600 x 2,500 mm Total weight: 8,000 kg EQUIPMENT Chuck Various suitable accessories

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 20721 Specifications: Iedpfx Afswrl T Tjioih S70 mount, but a little wider For excavator Works as it should Weight: 645 kg 172 Bar Ready for delivery

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table -Clamping plate: on a solid base frame, with vice -Clamping surface: 2000 x 1000 mm -Table height: 925 mm -Plate thickness: 115 mm -Vice: clamping jaws: 150 x 30 mm clamping width 250 mm Iijdpfx Afoxm Sagjijh -Transport dimensions: 2480/1000/H1110 mm -Weight: 1850 kg

Condition: excellent (used), Year of construction: 1995, Schroeder HS 2000/1.0 Manual Guillotine Shear Specifications: Manufacturer: Schröder Model: HS 2000/1.0 Year of Manufacture: 1995 Working Length: 2000 mm Cutting Thickness: 1.25 mm Collecting Tray Rear Paralleling Device via Handwheel Iiodpfxewhf Nte Afijh Location: Arrives at Warehouse 54634 Bitburg - Available at Short Notice -

Year of construction: 2018, condition: used, Serial number: 1302xxxx Please contact ATS Norway for more information Please provide reference number upon request: 19196 Iisdovgzv Iopfx Afioh Description: Ammann 538 kg vibrating plate for sale. It has stood for less than a year since it was new and not used at all. Everything must work as it should Ready for delivery.