Used Fabric Laminating Machine for sale (68,309)

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 08011887520 CR, overall weight: 700 kg, type of input current: AC, input voltage: 400 V, total length: 2,250 mm, total width: 1,280 mm, total height: 1,450 mm, stack height: 500 mm, compressed air connection: 8 bar, working width: 520 mm, temperature: 150 °C, power of vacuum pump: 9,000 W, Equipment: CE marking, FORMICA Foliant 520 from 2008, in very good condition and available for sale. The machine has been well maintained and carefully operated throughout its service life. It has only been used for a few hours per day on average, resulting in limited usage and a well-preserved overall condition. The FORMICA Foliant 520 is in very good working condition and is ready for continued professional production. Regular maintenance and careful operation have ensured reliable performance. Machine highlights: Manufacturer: FORMICA Model: Foliant 520 Knsdpfxoz Hnkrs Anusc Year of manufacture: 2008 Very good overall condition Well maintained Limited daily operating hours Carefully operated Ready for continued production Inspection possible by appointment The machine represents a good opportunity to acquire a well-maintained FORMICA Foliant 520 from 2008, suitable for professional production and ready for further use. Further technical specifications, photographs and additional information are available upon request.

Condition: good (used), Foliant Vega 400A Laminating Machine The most equipped laminating machine in Foliant’s offer. Fully automatic machine, ideal for digital printing. Very good condition. Year of manufacture: 2015. Kjdezyz A Djpfx Anuonc Description: – High stack feeding (elevator) – Automatic separator – Pneumatic roller pressure – Sheet straightening module – Built-in compressor for blowing and vacuum (Becker) – Jogger on the sheet outlet Feeding system: Pneumatic belt Feeding stack height: 30 cm Max. Capacity: 2100 B3 sheets/h Maximum lamination speed: 18 m/min Temperature: 20 – 140°C Heating time: 8 min Installed power: 3000 W Power supply: 230V Weight: 320 kg Made in the Czech Republic.

Condition: good (used), SEAL AquaSEAL SW 3300 — Liquid Laminator The AquaSEAL SW 3300 applies water-based protective coatings to wide-format digital prints, including banners, billboards, vehicle graphics and truck curtain sides. It applies, smooths and dries the coating, providing protection against water, abrasion, UV exposure and chemicals when used with suitable AquaSEAL liquid laminates. Automatic infrared curing with Accucure Feedback control. Knsdpfxsz Ndtne Anuoc Segmented heaters for processing narrower materials. Roll-fed or fan-folded operation. Multiple-roll handling capability. Variable speed and touch-sensitive control panel. Non-stick coated parts for easier cleaning. Technical specification Maximum coating width: 3,300 mm Maximum processing speed: Up to 3 m/min, depending on material and Meyer bar Dimensions (W × D × H): 4,000 × 1,200 × 1,100 mm Machine weight: 816 kg Electrical requirements: 3N/PE, 208–240 V, 50/60 Hz, 26 A per phase Compressed air requirements: 90–125 psi Material feeding: Roll-fed or fan-folded Standard coating bar: Smooth bar

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, working width: 2,000 mm, cutting width (max.): 2,000 mm, cutting height (max.): 200 mm, compressed air connection: 6 bar, Bullmer fabric spreading machine Eco2, including a 6-meter conveyor table. Knodpfx Ansz Apz Hsusc The machine is located in the Münsterland region.

Condition: good (used), Autobond Mini 105 TPH-RU-SAB-VS Automatic Laminating Machine The most efficient machine on the market from a legendary manufacturer. This advanced machine boasts high performance thanks to an external heating thermostat. Made in Great Britain. Technical specifications: Max sheet size: 1060mm x 1060mm Min sheet size: 320mm x 285mm Min grammage: 115 gsm Max grammage: 650 gsm Operating temperature: 80-135°C Max operating speed: 120m/min Weight: approx. 4500 kg 380V power supply Additional 8 bar air supply Knodozz Hfyepfx Anujc Large-diameter, chrome-plated steel cylinder, filled with water for greater stability. Double-sided laminating Pneumatic clamping, separation, and automatic feeding. Adjustable pressure. High-stack feeding, Heidelberg Speedmaster feed head. Expansion roller for film fixing. Sheet straightening module. Stacker for sheet removal. The machine can operate in pallet-to-pallet or pallet-to-roll configurations. Two independent heating systems for two rollers, and a water-based sheet cooling system via rollers.

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: 1915, Oteman Delta P03K Quick automatic fabric spreading machine with spreading table, built 2003 in Igualada (Barcelona). In working order. TECHNICAL DATA Manufacturer: Oteman S.A., Igualada (Barcelona), Spain Model: P03K Quick Serial number: 1915 Year of construction: 2003 Maximum working width: 1,800 mm Maximum load: 80 kg Maximum roll diameter: 600 mm Knsdpfx Anez At Scsujc Maximum speed: 2 m/sec Power: 2 kW Voltage: 380 V three-phase Current: 10 A Frequency: 50/60 Hz Machine weight: 498 kg Control: Delta + JT Kombi programmable controller Spreading table: included, with travelling rails Condition: in working order The machine is installed and running in Seville. It can be seen and tested in operation by appointment. Machine owned by the seller, free of encumbrances.

Condition: refurbished (used), Year of construction: 2014, operating hours: 10 h, functionality: fully functional, machine/vehicle number: SGSHK, compressed air connection: 6 bar, working width: 760 mm, warranty duration: 6 months, operating speed: 1,000 mm/s, Komfi Sagitta 76 with Hot Knife and B1 Stacker Kodpfx Anezdnpxoujnc Robust and powerful machine suitable for lamination in continuous operation with a standard volume of millions of sheets per year. Designed for time-efficient work: feeding sheets from a pallet including easy placement of the pallet into the machine using laser pointers, elements for quick adjustment of the machine to a new job, air shaft, pneumatic snapping unit or hot knife for reliable separation of a wide range of foils. Also digitally printed job can be easily and conveniently processed on the machine. Well suited and highly applicable for both commercial printing and the packaging industry. Energy saving zone heating system with fastest heat up time. Max. production speed 60 m/min (3600 B1 sheets/h); 50 m/min with hot knife (3000 B1 sheets/h) Max sheet size 760 × 1120 mm (up to 1300 mm) Paper weight 115-600 g/m² Machine dimensions (incl. delivery desk) 4.25 x 1.55 m Basic configuration Feeder: Komfi double action feeding head for reliable feeding even at high speed and small format. Front lay register for precise and constant sheet overlap. Compressor for feeder. Sheet overlap sensor for protection of pressure roller from film sticking in case of a miss-feed. Adjustable separation blowers for reliable separation of sheets from the pile and trouble-free loading of long sheets. Laminating Unit: Powerful pneumatic pressure system to ensure excellent laminating result. Adjustable distance stoppers to enable processing thick substrates and windows lamination. Air shaft for 3″ reel core laminating film. ”On-the-fly” height-adjustable spread roller for perfect smoothing of difficult film before lamination roller. Zone heating of the laminating roller saves energy when laminating small formats. Temperature sensor inside the cylinder for extremely precise regulation. PUR pressure roller for longer roller life. Separator & Delivery: Rotary separation knives for reliable film separation at high speed. Built-in perforator to support trouble-free sheets separation, or to be used for special jobs where knife is not applicable. Pneumatic driven separation roller. Automatic (pneumatic) skew wheel increases reliability of separation when processing wide range of jobs. Good to use for long sheets. Adjustable speed of snapping roller for perfect separation of difficult jobs. Jogging table. SW functions included Stop on the sheet overlap to avoid waste sheets. Zero overlap possibility for processing thick substrates. Automatic pressure and temperature detection to prevent irregularity in lamination quality. End of job function for easy rewind of film. Sensor for sheet separation detection and jam detection. Job settings memory Built-in internet connectivity for service support. Available options Film slitter to cut film to the requested width. Additional On roll perforator. Integrated or External Effect foiling device (OTF). Universal pallet positioning kit enables to load variety of different pallets into the machine. Hot knife option for perfect separation of thick, PET and Nylon films that eliminates flagging. Antistatic bar removes static charge from the separator to avoid thin sheets wrapping onto the rollers. Windows lamination kit. Set of chilling rollers placed between laminating unit and separator to reach high quality embossing or windows lamination. Automatic sheet stacker (pallet stacking).

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 6232-07-012, type of input current: AC, total width: 4,100 mm, total length: 4,400 mm, input voltage: 400 V, input current: 380 A, feed length X-axis: 3,200 mm, feed length Y-axis: 3,500 mm, working width: 3,200 mm, total height: 1,400 mm, cutting width (max.): 3,200 mm, cutting height (max.): 3 mm, compressed air connection: 8 bar, Innsbruck, May 19, 2026 Good condition: Used S.M.R.E. SM-320-TA High-Performance CNC cutting plotter (year of manufacture 2012) Are you looking for maximum precision and efficiency for XXL cutting? For sale is a high-performance, industrial conveyor cutting machine from the premium manufacturer S.M.R.E. (SolarEdge Automation Machines). The machine is in very good, ready-to-use condition and is ideal for the continuous processing of technical textiles in large formats. The most important highlights at a glance: Ksdpezuzimsfx Anuonc Year of manufacture: 2012 Working width: 3,200 mm, table length 3,500 mm – perfect for XXL formats without material division Conveyor system: Robust, multi-layered industrial conveyor belt for automatic, endless material feed Drive & Performance: Powerful 8 kW rated power (400 V) for fast and precise cuts Equipment: Vacuum system for perfect material hold, automatic unwinder with precise material guidance correction, and flexible tool heads (including drag/rotary knives and a marking pen). Location: Innsbruck/Austria Perfectly suitable for: Manufacturers of truck tarpaulins, tents, awnings, advertising banners, pool covers, and sophisticated technical products. Take the opportunity to bring your production to the next level with this modern, extremely reliable system. Ready for immediate use! Dismantling and transport of the machine must be organized and paid for by the customer. Technical information: Cutter IBK Cutting window X 3,500 mm Y 3,200 mm Connection values: 1 x 380/400 VAC 50/60 Hz (TN-S / TN-C-S) 30 kW 1 x 380/400 VAC 50/60 Hz (TN-S / TN-C-S) 15 kW 1 x 230 VAC 50 Hz 200 W 1 x Oil-free compressed air 0.6 MPa 400 l/min Dimensions: Cutter L x W 4,400 x 4,100 mm Unwinder 1 approx. 2,500 x 4,000 mm including material roll Unwinder 2 approx. 2,000 x 4,000 mm including material roll Safety area all around 1,000 mm => Installation area approx. 11 x 6 m + maneuvering/working area Weight: approx. 2.5 tons

Condition: used, Year of construction: 2019, functionality: unexamined, machine/vehicle number: S40-0051, type of input current: three-phase, input voltage: 400 V, working width: 3,210 mm, cutting width (max.): 3,210 mm, laser power: 400 W, type of cooling: water, laser type: CO₂ laser, laser source model: Firestar f400, Equipment: fume extraction, The system consists of: Trotec SP4000 C / New Textile – 400 W CO₂ laser cutting system Kjdpjzuyg Rofx Anuonc Sigma C13 – Cooling unit for the laser system Aigner VENT Set SP 3000 – Extraction and ventilation unit ASCO BV – Unwinding and material feed system for roll goods JQS Querimat QSV – Cross-cutting unit with a cutting width of 2,500 mm Firestar – CO₂ laser source The system is currently located in Worms and was used in ongoing production until the plant was shut down. Since the machine is currently not connected to the power grid, a current functional test cannot be performed at this time. An on-site inspection is possible by arrangement. The system is offered in its current condition and with the components shown in the pictures.

Condition: like new (used), Year of construction: 2026, operating hours: 5 h, functionality: fully functional, type of input current: AC, total width: 3,000 mm, total length: 4,500 mm, input voltage: 380 V, feed length X-axis: 2,000 mm, feed length Y-axis: 3,000 mm, feed length Z-axis: 150 mm, working width: 2,000 mm, total height: 3,000 mm, cutting width (max.): 2,000 mm, cutting height (max.): 3,000 mm, compressed air connection: 3 bar, High-Precision CNC Cutting Machine for Carbon Fiber Prepreg & Composite Materials Professional CNC cutting plotter designed for precision cutting of carbon prepreg, fiberglass, technical textiles, foams, leather, PVC, and other advanced composite materials. Ideal for aerospace, automotive, marine, motorsport, and composite manufacturing applications. The machine delivers extremely accurate and repeatable cuts while significantly reducing material waste and production time compared to manual cutting. Equipped with vacuum table technology for secure material fixation and clean, stable processing of delicate prepreg materials. Suitable for both prototyping and serial production. Key advantages: Knodpfx Anoy Tvatsuoc • High cutting precision and repeatability • Excellent for carbon fiber prepreg cutting • Fast and efficient production workflow • Clean edge quality without fraying or burning • Reduced material waste • Vacuum working table for stable material holding • Industrial CNC control system • Vacuum pump included • Suitable for complex geometries and nested parts • Reliable operation for composite manufacturing environments Applications: • Carbon fiber prepreg cutting • Fiberglass and aramid fabrics • Composite part production • Automotive and motorsport components • Marine composite manufacturing • Aerospace applications • Technical textile cutting • Prototype and serial production The machine is in very good working condition and can be tested on-site. Vacuum pump is included in the sale. For additional information, technical details, videos, or pricing, please contact us.

Condition: excellent (used), Overview Knedpfx Ansyxp Nxeuoc Now in stock at Glendale we have this Refurbished Foliant Vega 400A Automated Laminator with Digital Foiling. This B3+ laminator has been fully refurbished to excellent working condition and is designed for heavy duty digital output and B3 litho lamination. The Vega 400A is a compact industrial laminating machine capable of speeds of up to 18 metres per minute, producing over 2,000 SRA3 sheets per hour. It features a deep pile vacuum feeder, high speed bump separator, and non-stick pressure roller, ensuring reliable feeding and consistent lamination quality across both digital and offset printed sheets. The system includes an adjustable twin decurl unit for offset and digital prints, a digital foiling module for foil, holographic, glitter, and spot-UV style finishes, and the optional jogger reception unit for neat sheet delivery. The integrated pneumatic compressor allows the machine to operate without any external air supply, making it a versatile and compact finishing solution. The system has seen light use within a small digital printing operation and has processed under 75,000 laminated sheets since new. Key Features Rising pile vacuum feeder with belt head Built-in Becker vacuum pump Quick change film shaft with tension control Film capacity up to 3000 metres (22–42 micron) Inline trim slitter and perforating wheel Twin adjustable decurl system Heated chrome laminating roller Pneumatically adjustable pressure High speed bump separator Touchscreen control system Optional jogger reception included Why Buy the Refurbished Foliant Vega 400A? The Refurbished Foliant Vega 400A provides a highly productive and versatile laminating solution for print businesses producing both digital and offset work. Key benefits include: Production speeds of up to 18 metres per minute Output of over 2000 SRA3 sheets per hour Integrated digital foiling capability for premium finishes Twin decurl system for digital and litho prints Integrated compressor – no external air supply required Compact industrial footprint Fast warm-up time of under 10 minutes Optional jogger delivery included This system allows printers to produce high quality laminated products while also adding premium finishing effects such as digital foil and decorative lamination. Specifications Manufacturer Foliant Model Vega 400A Max sheet size 380mm x 660mm Min sheet size 200mm x 200mm Paper weight 115gsm - 500gsm Max speed 18 metres per minute Laminating roller pressure Pneumatic Feeder Automatic Suction Vacuum Belt Seperator Automatic bump rollers Decurl bar Standard - in run adjustable Air compressor Integrated as standard Warm up time 8 minutes Temperature range 80 - 140°C Jogger reception Included Power requirement 230/240v 50/60Hz Machine weight 370kg Machine dimensions with jogger (L)1980mm x (W)820mm x (H)1230mm

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, type of input current: AC, Equipment: compressor, Foliant VEGA 400a Fully Automatic Laminating Machine Knjdpfx Anoyxyzrjuoc

Condition: used, SPECOLA - FABRIC INSPECTION MACHINE TECNOTEAM USED, WORKING WIDTH 190 CM, TOP LIGHTING Knsdpjx A Inljfx Anuec

Condition: like new (used), Year of construction: 2018, operating hours: 900 h, Lectra IQ80 cutting machine, year 2018, max cutting thickness 8 cm, working width 180 cm, 900 operating hours. Machine in excellent condition. Kodpfxjycqcte Anuenc

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, working width: 1,800 mm, cutting height (max.): 30 mm, compressed air connection: 10 bar, An exceptional opportunity to acquire a fully integrated, high-performance automated multi-ply CNC cutting solution. Commissioned in August 2023 and kept in excellent condition, this complete VetiGraph / Serkon Makina setup is available for immediate purchase. Full UK delivery, professional decommissioning, transport, and complete onsite re-commissioning are all included to get your facility running quickly and smoothly. Get a complete factory upgrade at a fraction of the cost of new equipment. Package includes: * Serkon MC30 Multi-Ply CNC Cutter: 30mm compressed cutting height, 180cm width, continuous conveyor, drill and vortex knife cooling. * MN1 Fabric Spreader & ML2 Roll Lift: Automatic tension-free laying with a 9m x 2m air-flotation table. * Complete CAD/CAM Suite: Includes VetiGraph Pattern Design, Automated Marker Nesting, and FastJet Twin-Head Plotter. * iDigit Photo Digitiser: Quickly converts physical patterns to vector files. Full Turnkey Package: Includes UK delivery, complete installation, fully setup commissioning, 7 days of total onsite training, and a 6-month warranty. Avoid long manufacturer lead times and substantial capital outlay. This complete system is ready for immediate inspection in Preston and fast deployment to your facility. Delivery & Installation: Ksdpfx Aez A D Ryjnuenc * For deliveries outside the UK, the machine is supplied on an Ex Works (EXW) basis. The buyer is responsible for arranging and covering the cost of international transport, import duties, taxes and any local delivery charges. * Installation and commissioning can be provided by our engineers at an additional cost. For overseas installations, additional charges will apply to cover engineer travel, accommodation and associated expenses. * Please contact us for a quotation for installation and commissioning to your location.

Condition: excellent (used), Now in stock at Glendale we have this GMP QTopic 380 Laminator with Foiling/Sleeking rewinder. Having been within a small digital implant, this laminator has had little use. The laminator is in perfect working order and includes the air compressor and foiling unit. Raising ordinary print work to 'extra-ordinary'.GMP QTopic 380 has been developed to meet specific print finishing requirements and built to exacting technical standards – with fully controllable pressure and heat processes, devised to deliver optimum results with today's digital print output. Kedpfowi T Tvex Anuonc The GMP QTopic 380 offers pneumatic pressure which is required to get a great finishing when laminating and/or foiling is required. The pneumatic pressure is supplied by the integrated silent air compressor housed in the Qtopic 380 stand. This semi-automatic system is hand feed with automatic sheet separation. Capable of working at speeds up to 10 metres per minute the QTopic 380 can laminator over 1300 SRA3 per hour. Turnaround times and waste are further minimised with the unique 'burst separation' system. The laminating film is micro-perforated on the edge by the robust marking device and then separated by the pneumatic burst roller. This easily separates the laminated sheets prior to the actual edge of the media, leaving clean and square datum edges from which to measure, cut, fold or guillotine. Faultless lamination. Class-leading lamination for the commercial and digital printer. Using state-of-the-art technology, combined with integrated pneumatic pressure, the QTopic 380 delivers superior bonding and faster production times – compared to standard systems. In addition, the fully adjustable heat and pressure combinations enable a wider range of laminates to be used with litho or digital printed media. Stunning foiling. For today's printers who demand stunning results with that extra ‘wow’ factor – the GMP QTopic 380 delivers more than just class-leading lamination. Metallic, coloured, patterned or holographic style foils can be added to digitally printed materials in either spot or flood treatments. This decorative effect traditionally would involve costly custom die production to create these effects. However, the QTopic can deliver instant and affordable results - and with upgraded pneumatic pressure, an even wider choice of media is now suitable for great results! Specifications Manufacturer GMP Model QTopic 380 Year 2021 Condition Refurbished Stock Number 114941 Laminating speed 1.5m to 10m/min Paper weight 110-400gsm Warm up time 5 minutes Laminating temperature up to 150° Temperature control Touch screen Speed control Touch screen Roller pressure Pneumatic Film core (mm / inches) 77mm 3" Electrical requirements 220/240v 50/60Hz Machine weight 187kg Dimensions L2010mm x W710mm x H1475 - all when in use

Condition: like new (used), functionality: fully functional, Very nice semi-automatic laminating machine for sale. Brand: Matrix, type 370. Knodpfx Ajz Samxsnuec Maximum lamination speed: 10 meters per minute. Maximum roll width: 340 mm. Maximum sheet width: 420 mm. Quick warm-up time. Semi-automatic feeder with overlap function. Preset anti-curl settings. This machine is in very good condition and is fully functional, complete with a manual. You are welcome to test this machine at our location. We can arrange transport and packaging for you and load it into a truck or container. Please request a price including transport (location within the Netherlands). Best regards, Henk Hoos.

Condition: excellent (used), Year of construction: 2013, machine/vehicle number: 169083, 2013 Single Sided B2 D&K Europa Laminator Installed used April 2024 refurbished with new rubber rollers and temperature sensor Kedpfx Anjz E Nfujuonc Reason for sale - upgrading to double sided

Year of construction: 2017, condition: ready for operation (used), Six identical Demsan fabric doubling and winding machines are offered. Max. fabric width: 2000mm, fabric infeed: from roll and in open width, fabric delivery book/roll: 1000mm, double folded, max. operating speed: 60m/min, operating direction: forward, control: Hitech touch panel. Machine dimensions X/Y/Z: 4000mm/3100mm/2600mm, weight: approx. 2390kg. Equipped with fabric tension control, electronic length measuring system with encoder, calibration function, RS-232 interface, end-of-fabric photocell, photocell-controlled fabric catcher and centering system, dancer roller mechanism, Argox thermal printer, photocell-controlled edge guiding system, motorized fabric guide adjustment, AC geared motors, frequency converters and pneumatic opening unit. Four machines were manufactured in 2017, and two machines were manufactured in 2016. Documentation available. Inspection possible by arrangement. Knjdozta Eqspfx Anujc

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, single-sided lamination Knjdpfx Anszyk A Heuoc heated upper steel roller

Condition: new, Year of construction: 2010, functionality: fully functional, PMF 465 CE We offer for sale a high-quality, professional band pressing machine (thermal laminator) from the German manufacturer PMF GmbH Maschinenfabrikation. The unit is brand new, never used (so-called NOS – New Old Stock), and is in perfect technical and visual condition, still placed on its original transport pallet. PMF machines are highly regarded in Western Europe for their uncompromising precision, durability, and highest quality, in accordance with the Made in Germany standards. Model 465 is widely used in the footwear industry (reinforcing and joining upper parts), in the leather goods industry, in the garment industry, and in the automotive industry. An automatic conveyor belt ensures smooth and consistent material feed in the working area. A digital microprocessor temperature controller (accurate thermal stabilization) is coupled with two independent timer programmers for precise setting of the pressing time and transport time. A pneumatic clamping system is activated by means of an ergonomic, two-button foot pedal. The machine is equipped with a side air preparation unit (regulator with pressure gauge). A spacious work table with four independent, contoured auxiliary shelves for the operator, facilitating the handling of large or complex parts (e.g., uppers, patterns). Complete protection of the hazardous area: front and rear covers made of plexiglass, a metal perforated cover for the heating unit, and an easily accessible emergency stop button. The unit has a full CE certificate. Price for the machine is negotiable. Transportation to the customer is possible. Kodpfez Sxbmsx Anusnc If you have any questions, please do not hesitate to contact us.

Condition: used, Year of construction: 1998, functionality: fully functional, Laminating machine LAMINA 1114 FA. Manufactured in SWEDEN; year: 1998 Max format: 1400×1100 mm Min format: 200×350 mm Top sheet: 130–450 g/m2 Bottom sheet: from 250 g/m2 Material thickness: 0.6–10 mm Feeder height: 500 mm (bottom), 300 mm (top) Production depending on material: up to 1,500 sheets/hour Ksdpfxjy Ryhvs Anuonc The machine has been dismantled. At the time of disassembly, it was operational.

Condition: like new (used), Year of construction: 2018, operating hours: 600 h, Lectra Q25 cutting machine, year 2018, max cutting thickness 2.5 cm, working width 170 cm, operating hours: 600. The machine is in excellent condition. Kedpfx Aeycp Sysnuonc

Condition: like new (used), Year of construction: 2010, functionality: fully functional, UV-Coating line, including drying unit for coating primer and protection lacquers as well as processing full sized finishings of digital printable media, running through with solvent-free UV-lacquers and direct lacquer curing with UV-radiation. A maximal plate height of 80 mm can be coated steplessly. Blobtra Devcmd Asi Njd Suitable for almost all surfaces within digital- and screen printing. High quality surfaces are guaranteed. Key Benefits - adjustable UV-power for individual setting up to the different coating requirements - EVG power supply unit for a building main fuse of 63 A. - central access for compressed air and electricity for the entire machine Knedpfx Ansvcmd Asuec Application - varnishing of all firm materials up to height of 80 mm - applying of primer e.g. for glass or furniture surfaces - varnishing of all UV-printed plates - foil inscription for vehicles - lacquer and priming of many flexible materials - displays - digital pictures, luminous exposure - inkjet prints - colored coatings and many more

Condition: excellent (used), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, Sheffield HC-810 Automatic Hot/Cold Strip Cutting Machine with PF-33 Automatic Prefeeder For sale: Sheffield HC-810 industrial automatic hot/cold cutting machine, supplied together with the Sheffield PF-33 automatic prefeeder. The machine is designed for precise and efficient cutting of webbing, straps, tapes, ribbons, and other textile materials. The hot cutting function allows synthetic materials to be cut and heat-sealed simultaneously, preventing fraying and ensuring clean, durable edges. The equipment is suitable for industrial textile production, including the manufacture of tactical equipment, belts, straps, bags, backpacks, and other products requiring accurate, repeatable cutting. Main features: * Automatic hot and cold cutting * Maximum cutting width: 6¼ inches (approx. 159 mm) * Electronic control panel * Programmable cutting length * Adjustable feeding speed * Automatic piece counter * Adjustable blade dwell time for thicker materials * Automatic material feeding * Precise and repeatable cutting operations * Suitable for nylon, polyester webbing, straps, ribbons, and similar materials * 220 V version Included equipment: * Sheffield HC-810CE-220V automatic hot/cold cutting machine * Sheffield PF-33-220V automatic prefeeder * Original operating manual * Additional accessories and parts shown in the photographs Automatic feeding system: The Sheffield PF-33 prefeeder facilitates the feeding of material from rolls, ensuring a consistent material supply during automatic cutting operations. The combination of the HC-810 cutting machine and PF-33 prefeeder provides an efficient solution for repetitive industrial cutting tasks, reducing manual handling and improving production consistency. Technical condition: The machine is 100% fully functional, in excellent working condition, and ready for immediate use. All functions operate correctly. The equipment requires no repairs and is ready to be integrated into a production process. Kedpfez Nyv Tox Anuonc The machine is used but remains in very good overall condition, with normal signs of industrial use. Additional information: * Manufacturer: Sheffield Cutting Equipment * Model: HC-810CE-220V + PF-33-220V * Year of manufacture: 2024 * Purchase date: February 2025 * Condition: Used, fully functional * Availability: Immediately available * Location: Gdańsk, Poland The machine can be inspected and tested by prior appointment. The equipment is offered as a complete cutting and feeding system, including the accessories shown in the photographs.