Used Fabric Laminating Machine for sale (68,141)

Condition: used, Year of construction: 2013, • Web width: 1300 mm • Max mechanical speed: 400 m/min (depending on materials and process) • Substrate types: Film, foil, paper, and combinations thereof Main Components and Features Automatic web tension control across all unwinds and rewinds Motorized adjustment for nip pressure and web alignment Touchscreen HMI for process control and recipe management Modular design for easy access and maintenance Web inspection and defect detection (if installed) Corona Treatment Unit Nordmeccanica Solventless Mixing Unit Continuous, inline mixing of two-component adhesive system Equipped with: Precision gear pumps for both A and B components Automatic ratio control and monitoring Pumps for continuous filling to ensure uninterrupted production Easy-access design for cleaning and maintenance Isdpfxsxg Hqaj Ah Notb Drying Tunnel Equipped with 2 thermal oil heating batteries Provide stable and efficient heat transfer Maintain consistent tunnel temperature, essential for proper adhesive drying Integrated with 2 modulating valves Automatically adjust the thermal oil flow Enable fine control of tunnel temperature for different lamination applications LEL (Lower Explosive Limit) Monitoring System Zellweger LEL sensor. Continuously monitors solvent vapor concentration

Condition: good (used), Year of construction: 1998, functionality: fully functional, In Production SWEDEN; year: 1998 Size max: 1400×1100 mm Min size: 200×350 mm Top sheet: 130–450 g/m2 Bottom sheet: from 250 g/m2 Thickness: 0.6-10mm Feeder height: 500 mm (bottom), 300 mm (top) Production depending on the materials: up to 1500 sheets/hour, Ijdpfxov Ta Txe Ah Nstb The machine was technically sound at the time of dismantling. Cleaned. Dismantled.

Year of construction: 2009, condition: ready for operation (used), LAMINATING MACHINE FOR DOORS IPS MOD. PC-2500-SCBP Machine for the application of adhesive protective film on flat surfaces. Equipped with motorized feed with rollers and automatic cutting system. Machine for fixed height table line +/- 900 mm. Year 2009. Top and bottom gluing at the same time. TECHNICAL CHARACTERISTICS OF THE MACHINE - MINIMUM / MAXIMUM WORKING THICKNESS 15 / 50 MM - MAXIMUM WORKING WIDTH 2.400 MM - HEIGHT OF THE ROLLERS ADJUSTABLE TO THE FLOOR 840 / 950 MM - TOTAL POWER CONSUMPTION 3 KW - MINIMUM AIR PRESSURE REQUIRED 6 BAR Itodpfx Aehkr Ansh Nsb - VOLTAGE ELECTRICAL INSTALLATION 220 V - 380 V

Condition: used, Year of construction: 2009, functionality: fully functional, Complete laminating machine with: automatic feeder, automatic pressure roller, pile sheet feeder. Ijdpfsxdm E Esx Ah Nstb

Year of construction: 2012, condition: ready for operation (used), An Autobond laminating system for sheet-shaped and heat-resistant products is available. Laminating speed: 60m/min, min. sheet dimensions X/Y: 285mm/320mm, max. sheet dimensions X/Y: 1060mm/1060mm, paper thickness range: 90g-650g/m², min. laminating film thickness: 24µm, max. roller pressure: 6t, max. temperature pressure water unit/control: 140°C/135°C. Machine dimensions X/Y: approx. 4000mm/1600mm, weight: approx. 2000kg, operating hours: 28785h. Documentation available. An on-site inspection is possible. Iedpsxbrw Ujfx Ah Nstb

Condition: excellent (used), Matrix 530DP Double-Sided Pneumatic Laminator with Omni-Flow Feeder Price: Contact for pricing Location: Glendale, UK Availability: In stock – ready to ship Condition: Refurbished by trained engineers – Excellent condition, perfect working order Overview Boost your print finishing with the Matrix 530DP double-sided laminator, fully refurbished and tested by our trained engineers. Designed for professional print rooms, this automated laminating system includes the Omni-Flow Automatic Sheet Feeder, digital foiling/sleeking unit, and silent air compressor. It’s the perfect solution for short, medium, and long-run lamination and foiling. Key Features Professional double-sided lamination up to B2 size (510mm width) in a single pass – saves 50% production time over single-sided models. Omni-Flow Automatic Feeder with deep pile (180mm capacity), handles sheets up to 460mm x 9000mm and stock up to 400gsm. Automatic sheet separation with lamination speeds up to 10 metres per minute. Digital foiling and sleeking unit for premium finishes: foil, holographic, glitter, and Spot UV-style effects. Silent pneumatic compressor for consistent roller pressure without noise disruption. Refurbished and serviced for excellent condition and reliable performance. Included in Package Matrix 530DP Double-Sided Laminator Omni-Flow Automatic Sheet Feeder Foiling/Sleeking Rewinder Silent Air Compressor Itedsw Tlk Tepfx Ah Njb Why Buy from Glendale? Professionally refurbished and fully tested – every system is serviced by our trained engineers. Expert operator training and ongoing support – we help you get the best results from your equipment. Competitive pricing on consumables – keep running costs low with our affordable supplies. Established, trusted supplier – years of experience serving the print and finishing industry. Specifications Manufacturer Vivid Model Matrix 530DP Double Sided Laminator with Omni-Flow Sheet Feeder Condition Refurbished Stock Number 114957 Sheet Feeder Yes Pneumatic Pressure Yes Air Compressor Yes Max Speed 10 metres per minute Max Sheet Size 460mm x 740mm (550mm width in hand feed) Feeder capacity 180mm Paper Thickness 100-400gsm Warm Up Time 10 minutes Temperature Range 0-140°C Power Supply 32amp 220/240V. Dimensions (L)1800mm excluding exit tray x (W)860mm x (H)1600mm Machine Weight 380kg (Matrix & OmniFlow)

Condition: used, Kaschiermaschine / Lamination machine Billhöfer FK 102 S Baujahr / Year 1997 - Serial-No. 6878 Format min. 300 x 450mm - max. 1040 x 1420mm Grammatur 60 up to 500 gr/m2 card board Bogenanleger / automatic Feeder Billhöfer A-20-P Glättekalander GK-4-1080 Kaschierwerk / Lamination Unit FK 102 S Bogentrenner Achilles BT 4.1 Bogenabstapler Gremser S102A1 >Inline Prägekalander gehört nicht dazu, Inline Embossing kalander not included< Specifications: Pneumatische Seitenmarke / pneumatic Sheet mark Fa. TPM Elektronische Überlappungssteuerung / Electronic overlap Control Fa. PME Automatische Folienrollenspannung Fa. Achilles Folirnschneidvorrichtung mit pneumatisch geregelter Aufwicklung Fa. TPM Perforationsvorrichtung am Trenner Trenner Achilles BT 4.1, elektronische Trennpunkteinstellung Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Itedpswtygkofx Ah Nob On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Brand new / Showroom machine Automatic roll-fed encapsulation laminator with auto-feed, lamination, and cutting in one process Itedpswrpd Nsfx Ah Neb Technical Specifications: Max. Laminating Width: 11" (279 mm) Laminating Speed: 39 inches per minute (approx. 99 cm/min) Maximum Output: Up to 240 sheets per hour Film Thickness Range: 1.5 to 5 mil Feeder Capacity: Up to 200 sheets Power Requirements: 110 V Controller: Digital panel Dimensions (W × L × H): 24" × 19" × 18" (approx. 610 × 483 × 457 mm) Cooling System: Included Stand: Optional Sleep Mode: Activates after 10 minutes Key Features: Compact design fits office or school environments One-button start; stops automatically when job is complete Up to 3x faster than pouch laminators Easy top access for quick cassette changes Integrated internal rotary cutter for safety Digital panel for setting margins and sheet count Film cassette lifts out for easy replacement Ideal for schools, offices, and print shops

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, Lamina System Fully automatic laminator FA 1416. Machine with no mileage, in very good technical condition, after total renovation. Machine in motion. It laminates both closed and open cardboard. Max. sheet size: width: 1400 mm length: 1600 mm Ppsbqkzsrit H Roa I Ssu Min. sheet size: width: 200 mm length: 350 mm Top sheet: 130 - 450 gm / m2; Bottom sheet: from 250 g / m2, thickness: 0.6 - 10 mm Automatic substrate feeder with continuous sheet feeding Automatic top sheet feeder The machine is built on a rigid frame structure made of anodized aluminum profiles. Iedporit H Rofx Ah Nstb Width (with platforms) - 3.7 m, length - 10.5 m, height 2.9 m Fitting accuracy

Condition: reconditioned (used), functionality: fully functional, Lamina System Semi automatic laminator SA 1416. In very good technical condition, after total renovation. Machine on power, can be tested. Max. sheet size: width: 1400 mm length: 1600 mm Min. sheet size: width: 200 mm length: 350 mm Top Sheet: 130 to 450 g/m2 1 pts = 28,25 g/m2 Bottom Sheet: Iedpfx Aswz Ev Toh Nstb From 250 g/m2 to 10 mm (0,39”) 1 pts = 28,25 g/m2 corrugated from 0,6 - 10 mm (0,016” - 0,39”) Automatic substrate feeder with continuous sheet feeding The machine is built on a rigid frame structure made of anodized aluminum profiles. Width (with platforms) - 2350 mm, length - 4600 mm.

Condition: reconditioned (used), functionality: fully functional, The Lamina FA Blackline 1620BL is a highly accurate, high speed sheet-to-sheet fully automatic laminating/mounting machine. The machine can handle most of the existing materials in the market. The modular construction allows easy upgrading and maintainance resulting in a machine that lasts for many years. Max. sheet size: width: 1600 mm length: 2000 mm Min. sheet size: width: 350 mm length: 350 mm Feeder Capacity: Top feeder: 500 mm (20”) Bottom feeder: 800 mm (32”) Top Sheet: 130 to 450 g/m2 1 pts = 28,25 g/m2 Bottom Sheet: From 250 g/m2 to 10 mm (0,39”) 1 pts = 28,25 g/m2 corrugated from 0,6 - 10 mm (0,016” - 0,39”) Air Requirements: 6 bar; 80 psi; 34 CFM, Approximately 500 L/min Can be additionally equipped with Optional Laminating Machine PB 1600 Pressure Belt Ijdpew Hrrrsfx Ah Notb

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, LAMINA 1116 FAS+ Machine in production, can be inspected in Bucharest, Romania. Model/ Width/ Length/ Width/ Length/ Weight 1116 FL+/ 1100 mm (43”)/ 1600 mm (63”)/ 2150 mm (85”)/ 6800 mm (267”)/ 2500 kg (5510 lbs). Ijdpowc Trfsfx Ah Notb

Year of construction: 2017, condition: excellent (used), Laminating machine with the possibility of wet and dry foiling Year of manufacture 2017 Max format 1080x1000mm Min format: 300x350 Iodpfolq Dpisx Ah Njtb Speed 20-100m/min Paper weight 100-500g Dust remover Servo motor control gauge automatic alignment Heated sheeting knife

Condition: ready for operation (used), Year of construction: 2012, input voltage: 380 V, Description about the machine: 2-sided, sheet fed, thin film, thermal laminator for short runs Itjdpswrxqlsfx Ah Neb Max sheet size: 53 x 75 cm Min sheet size: 32 x 22.5 cm Max speed: 25 m/min 135 gsm to 450 gsm Quick make-ready Easy operation Small footprint Heavy-duty build quality Feeder Heidelberg-Stahl suction drum Bottom separation, continuous run, top loading Air inflates the sheets from the sides, allowing them to float on a bed of air Operator replenishes sheets on the run, thus providing continuous feed Laminator Electrically heated laminating roller Digital temperature controls up to 120°C (248°F) Rubber counter-pressure roller Choice of manually adjustable hand-cams or pneumatics for nip pressure Film mounted on a quick-change bar Film roll perforating mechanism Sheeter Integral steer & pull separator runs in-line Features include in-feed hold rollers, adjustable anti-curl bar, and variable speed belts Delivery into vibrating jogger table with under-sheet adjustable air control Perfector Sheets are laminated top and bottom in one pass Rubber counter-pressure roller becomes electrically heated Additional heated roller, quick-change bar, and perforating mechanism for 2nd roll of film

Year of construction: 1992, condition: ready for operation (used), Max. working width: 1800mm, heating capacity: 111kW, controls: Siemens SIMATIC 5, length: 22,000mm, height: 4500mm, with bobbin carriage, unwinding station, fabric storage, rotating frame, platform, support frame, vibrating conveyor chute, spreading roller, feed rollers, scattering machine, powder conveyor, IR emitter, pyrometer, calender unit, ascending batch winder, cross-cutting device, other elements and accessories, including extensive documentation, suitable for all web-shaped materials such as foams, non-wovens, textiles, paper, etc., open coatings can also be made, i.e. coatings with powder/adhesive that can be reactivated later, e.g. preparation for thermoformed parts, stiffening nonwovens can also be produced, such as those used to reinforce shirt and jacket collars, on-site inspection is possible, the machine was completely overhauled around ten years ago and has not been used much since. Itjdpfxsq Ixgls Ah Neb

Condition: excellent (used), type of input current: AC, input voltage: 230 V, Equipment: compressor, MATRIX MX 530 DP, double-sided thermal laminator, with foiling attachment. Complete with continuous feeder, touch screen controls, miss feed detector, air operated laminating pressure, Ijder Ddu Ijpfx Ah Njtb auto sheet separation drop sheet delivery. It is a pneumatic model with a built-in compressor for high-quality lamination of digital print. Complete with the gilding attachment and second feed roller for double-side laminating. This machine is in good condition, just serviced and ready for work. We can arrange export packing and transportation. (quotation on request) Our price includes packing on a pallet and loading onto your transport. Payment in GBP in full before loading. Preferred payment method, bank transfer. Please do not hesitate to ask if you need further information. Specifications: Max sheet size 510 x 640mm Min sheet size 200 x 300mm, Max speed 10m/min Film unwind shaft 75mm dia Temperature range 80-140 deg C Electrically heated laminating roller Electrical supply 220-240V, 50 Hz, 1 ph, 10A Machine weight 260kgs Machine size 1868L v 910W x1 285mmH

Condition: new, Year of construction: 2024, The LF-100 label finishing system. is a professional, compact all-in-one desktop finishing system that enables the die-cutting and laminating of labels in a single pass. labels in a single pass. The system features a high-precision, digital die-cutting digital die-cutter that can produce professional labels in virtually all shapes and sizes. Optionally, a laminate can be applied to give the labels a labels with a high-gloss and durable surface. durable surface. The LF-100 is designed for a width of 127 mm (5"). designed. The optical camera is designed that it reads only one black mark for each cut layout, which optimizes cutting speed and Iodeuvigcspfx Ah Notb synchronization. - Media path with ultrasonic sensor to ensure precise media guidance and media guidance and speed for precise precise punching. - Cost-effective, multi-edged blades extend the cutting time and need to be need to be replaced less frequently.

Condition: excellent (used), Now in stock at Glendale we have this GMP QTopic 380 Laminator with Foiling/Sleeking rewinder. Having been within a small digital implant, this laminator has had little use. The laminator is in perfect working order and includes the air compressor and foiling unit. Raising ordinary print work to 'extra-ordinary'.GMP QTopic 380 has been developed to meet specific print finishing requirements and built to exacting technical standards – with fully controllable pressure and heat processes, devised to deliver optimum results with today's digital print output. The GMP QTopic 380 offers pneumatic pressure which is required to get a great finishing when laminating and/or foiling is required. The pneumatic pressure is supplied by the integrated silent air compressor housed in the Qtopic 380 stand. This semi-automatic system is hand feed with automatic sheet separation. Capable of working at speeds up to 10 metres per minute the QTopic 380 can laminator over 1300 SRA3 per hour. Turnaround times and waste are further minimised with the unique 'burst separation' system. The laminating film is micro-perforated on the edge by the robust marking device and then separated by the pneumatic burst roller. This easily separates the laminated sheets prior to the actual edge of the media, leaving clean and square datum edges from which to measure, cut, fold or guillotine. Faultless lamination. Class-leading lamination for the commercial and digital printer. Using state-of-the-art technology, combined with integrated pneumatic pressure, the QTopic 380 delivers superior bonding and faster production times – compared to standard systems. In addition, the fully adjustable heat and pressure combinations enable a wider range of laminates to be used with litho or digital printed media. Stunning foiling. For today's printers who demand stunning results with that extra ‘wow’ factor – the GMP QTopic 380 delivers more than just class-leading lamination. Metallic, coloured, patterned or holographic style foils can be added to digitally printed materials in either spot or flood treatments. This decorative effect traditionally would involve costly custom die production to create these effects. However, the QTopic can deliver instant and affordable results - and with upgraded pneumatic pressure, an even wider choice of media is now suitable for great results! Specifications Manufacturer GMP Model QTopic 380 Itsdpfx Aswi T Tvjh Nob Year 2021 Condition Refurbished Stock Number 114941 Laminating speed 1.5m to 10m/min Paper weight 110-400gsm Warm up time 5 minutes Laminating temperature up to 150° Temperature control Touch screen Speed control Touch screen Roller pressure Pneumatic Film core (mm / inches) 77mm 3" Electrical requirements 220/240v 50/60Hz Machine weight 187kg Dimensions L2010mm x W710mm x H1475 - all when in use

Condition: good (used), Kraus and Reichert Kuris KVS700 Straight Knife Fabric Cutter Condition: Used and tested for functionality. _RD 6 kg Itodspitkgjpfx Ah Neb Find more textile machines - new and used - in our shop! International shipping costs on request!

Condition: new, Year of construction: 2024, Eastman BLUE STREAK 629X 6" inch NEW IN BOX MADE IN THE USA Precise cutting quality, even for multi-layered fabrics Fully automatic Easy operation thanks to optimum weight ratio Solid finish, designed for the highest demands Itodpfxewi Nvge Ah Njb Made of superior quality materials to ensure durability and a long service life. The straight blade cutting machine is suitable for cutting in one or more layers With a cutting height of 114 mm you can easily cut fabrics, knitted fabrics, non-wovens, technical textiles, foils, synthetic leather, leather or foam. Technical data: Type:BLUE STREAK II 629XStyle:Export Blade size:152 mm / 6" Cutting capacity:114 mm Connection:AC: 1 ~ 380V, Weight:15.4 kg PRICE 2500 EURO EX VAT EX SHIPPING COSTS NOTE 380 VOLT Call or email for more information The advertisement was automatically translated. Translation errors are possible.

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, S2G, a company specializing in the marketing of finishing equipment for printing, reprography, and integrated printing services for 27 years, offers a refurbished and thoroughly tested GMP QTOPIC 380 laminator. Laminating function with GLOSS, MATTE, SOFT TOUCH, and ANTI-SCRATCH MATTE films in digital or offset quality. Itodpfx Ajvgqg Njh Nob Features: Semi-automatic feed with a cell for overlapping sheets. Heated steel cylinder. Display settings: speed, temperature, and tear-off. Output die-cutting system with perforating wheel. Tension and decurling adjustment wheel. Speed: from 1.5 m to 10 m/minute. Paper dimensions: 180/210 mm to 380/500 mm (1200 mm option).

Condition: ready for operation (used), Four fabric inspection machines are available (1) Menzel WOB 1.600mm fabric inspection machine, working width: 1600mm (2) Menzel WOB 3.200mm fabric inspection machine from Hoftex, working width: 3200mm (3) Bauch Maschinenbau CB-WU 380 fabric inspection machine (4) Maag CT 5206-Ah fabric inspection machine. On-site viewing is possible. Isdpfew R Uzvsx Ah Nstb

Condition: excellent (used), Year of construction: 2009, operating hours: 110 h, functionality: fully functional, type of input current: three-phase, overall weight: 3,500 kg, Coating and laminating system. For paper and film. Rewinding and unwinding with automatic web edge and web tension control. Laminating unit is cooled. Max. 30 m/min. Working width 650 mm. The machine was only used in the laboratory for tests. Only 110 operating hours since new Hotmelt or dispersion can be used. Hotmelt is melted in a separate extruder and fed to the application unit via a heated hose. Roll or reverse roll is possible. Powerful IR dryer . Exhaust air system and cooling unit can be included. Ma. Roll diameter 800 mm. Core 3 1/2 ". Pneumatic winding shafts. Itedjrt Iqbspfx Ah Neb

Condition: good (used), Build in 2006 Komfi Aspira Laminating machine Max laminating speed 15 m/min Max sheet width 52 cm Sheet size max. 52x74 cm; min. 20x20 cm Ijdpfxogyzzuj Ah Netb Paper weight . 115-350g/sqm.

Condition: new, Year of construction: 2025, operating hours: 20 h, machine/vehicle number: Parmel_042025PA, Single Ply Cutter – Fabric & Textile Cutting Machine Iedpfxew N Rz Ao Ah Notb Our single ply cutters are the ideal solution for the precise cutting of textiles, leather, technical fabrics, and composite materials. With state-of-the-art CNC technology, they guarantee: • Maximum cutting precision for samples, prototypes, and series production • Flexibility for different materials and formats • Efficiency thanks to short setup times and automated processes Whether in the fashion, furniture, or automotive industry – our fabric & textile cutting machines deliver perfect results with maximum productivity. Model SC 1625 • Single-ply cutting up to 25 mm height • Working area (W × L): 1600 mm × 2500 mm • 2 cutting heads, double toolhead, needle punch kit, and plotting pen holder • Tool package: ERT, EOT, VPT (electric rotary knife, oscillating knife, punching module) • KIS (Knife Initialization System) • JWCS CAD/CAM Control Software • Vacuum pump • Air compressor • Passive roll feeder for non-elastic fabric • Parmel Cutting Software • 12-month warranty We provide installation, training, spare parts, consumables, and guarantee smooth operation both during and after the warranty period.