Used Fabric Laminating Machine for sale (67,099)

Condition: good (used), Laminating Machine Komfi Delta 76 Stacker Manufactured in 2016/2017. The machine is 100% operational and ready for operation. Nsdpfeyur Nlsx Afaocr This is an advanced, high-performance machine, ideal for commercial laminating. The machine is in very good condition and ready for production. Technical specifications: Max sheet size: 760mm x 1120mm Min sheet size: 300mm x 220mm Min grammage: 115 gsm Max grammage: 600 gsm Operating temperature: 80-145°C Max operating speed: 35m/min Built-in Becker compressor Weight: 2800kg 380V power supply Additional air supply: 6 bar Power consumption: 18kW Pneumatic clamping, separation, and automatic feeding from a high stack, automatic stacker. Touch panel for easy operation. Sheet straightening module. Tool kit and foil included.

Condition: used, Year of construction: 2008, GENERAL TECHNICAL DATA: Performance Mechanical speed: up to 450 m/min Production speed: depending on substrates and adhesive system Web & Dimensions Maximum web width: 1330 mm Maximum laminating width: 1315 mm Minimum web width: 600 mm Roll Specifications Maximum roll diameter: • Unwinder: 1000 mm • Rewinder: 1000 mm Core diameters: • Unwinder: 3” / 6” (76 / 152 mm) • Rewinder: 6” (152 mm) Web Tension Unwinding: 500 N Rewinding (with taper tension): 550 N Electrical Data Voltage: 3 × 400 V ±10%, 50 Hz (without neutral) Total installed power: 85 kW Maximum input current: 120 A Main switch: 150 A Pneumatic Requirements Pressure: 6 – 9 bar Consumption: 70 l/min Feed connection: 1/2” Hydraulic System Pressure: 3 bar Cooling consumption: up to 2700 l/h Feed connection: 1/2” Cooling System Water pressure: max. 5 bar Water temperature: 15–20°C Temperature difference: 4°C Pressure difference: 2.5 bar Flow rate: 2000 l/h Machine Configuration • Shaftless unwinder (primary & secondary) • Shaftless rewinder Ncodey Er A Uspfx Afasr • Automatic web guiding system • Adhesive metering system (5-roll application unit) • Laminating unit with pressure rollers • Cooling calender • PLC-controlled drive system • Touch screen control interface Materials (Supported) • Aluminium (ALU) • BOPP • LDPE / LLDPE • Nylon (Cast) • OPA • PET / PETP • PP (Cast) • Paper Material Thickness Range Films: approx. 7 – 200 µm (depending on material) Paper: 40 – 200 gsm Working Conditions Temperature: 10 – 40°C Humidity: 30 – 90% (non-condensing) Additional Equipment • Optional water chiller: approx. 21 kW cooling capacity • Closed-loop cooling system possible Control & Automation • PLC control system • Inverter-driven motors • Recipe storage (up to 500 jobs) • Production monitoring (speed, meters, tension) • Emergency stop system

Condition: excellent (used), Year of construction: 2012, Ref:11057 . 2012 Autobond Mini 105 TPHS-FL B1, double sided, fully automatic thermal laminator. Equipped with; Heidelberg deep pile suction feeder with back separation 250mm (10) diameter highly polished chrome laminating rollers Laminating nip pressure up to 6 metric tonnes 2 x Twin Tool Temperature Controllers Sheets are laminated top and bottom in one pass Rubber counter-pressure roller becomes water heated Ncedpfsx U A D Uox Afaor Additional heated roller, quick-change inflatable air-shaft, and perforating mechanism for 2nd roll of film Film is mounted on a quick-change air shaft Trim slitter and perforating mechanism Pneumatic clutch ensures precise film tension Swiss made temperature control unit Sheeter - Integral bump roller separator with anti-curl bar Pallet delivery table Specification: Max sheet size: 106 x 106 cm (41.73” x 41.73”) Min sheet size: 28.5 cm x 32 cm (11.5” x 12.5”) 115 gsm (80 lb text) to 650 gsm (24 pt) Max speed: 60 m/min (200 ft/min) B1 sheets up to 5,000 SPH.

Condition: excellent (used), Year of construction: 2015, working width: 3,000 mm, total height: 1,000 mm, cutting height (max.): 10 mm, The ATOM FlashCut EASY 888 L30 plotter is an advanced digital knife cutting machine designed for precise and rapid cutting of a wide range of materials, including leather, textiles, foams, and plastics. It is especially valued in the footwear, leather goods, and technical gasket/component manufacturing industries. ⸻ 📐 Technical Specifications • Working area: 3000 × 1000 mm • Power consumption: 13.5 kW • External dimensions: 3765 × 1955 × 2805 mm (height) • Weight: 1320 kg ⸻ ⚙️ Key Features • Versatility: The plotter enables cutting of various materials, from soft leathers to rigid plastics. • Ergonomics: Its compact and ergonomic design ensures ease of operation and space savings in the production facility. • Vacuum system: The dual-zone vacuum system ensures stable material hold during the cutting process. • Cutting head: Supports various tools, including oscillating knives and crease tools, enhancing production flexibility. ⸻ 🏭 Industrial Applications Njdpfx Afey D Sa Deascr The ATOM FlashCut EASY 888 L30 plotter is used in: • Footwear and leather goods manufacturing • Gasket and technical component production • Textile and furniture industries • Packaging and advertising materials production ⸻ 🛠️ Additional Information The L30 model is particularly recommended for companies seeking a solution that combines high cutting precision with production efficiency. With the ability to process large material formats and support multiple cutting tools, this plotter is suitable for both serial manufacturing and individual project tasks.

Condition: excellent (used), Year of construction: 2008, The ATOM FlashCut 3010 plotter is an advanced digital knife cutting machine designed for precise and fast cutting of a wide range of materials, such as leather, textiles, foams, and plastics. It is particularly valued in the footwear, leather goods, and gasket/component manufacturing industries. ⸻ 📐 Technical specifications • Working area: 3000 × 1000 mm • Power consumption: 13.5 kW • External dimensions: 3765 × 1955 × 2805 mm (height) • Weight: 1320 kg ⸻ ⚙️ Main features • Versatility: The plotter enables cutting of various materials, from soft leathers to hard plastics. • Ergonomics: Compact and ergonomic design ensures easy operation and space-saving installation in production facilities. • Vacuum system: Dual-zone vacuum system ensures stable material hold-down during cutting. • Cutting head: Supports multiple tools, including oscillating knives and creasing tools, providing greater production flexibility. Ncsdpfx Aoy D E R Nefaor ⸻ 🏭 Industrial applications The ATOM FlashCut EASY 3010 plotter is used for: • Footwear and leather goods manufacturing • Gasket and technical component production • Textile and furniture industries • Packaging and advertising material production ⸻ 🛠️ Additional information The 3010 model is especially recommended for companies seeking a solution that combines high cutting precision with production efficiency. Thanks to its ability to process large-format materials and support for various cutting tools, this plotter is suitable for both serial production and custom projects.

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 636, type of input current: three-phase, total width: 1,800 mm, input voltage: 400 V, input current: 10 A, lifting height: 2,000 mm, load capacity: 250 kg, 31 C – Gerber LS-250-LU Automatic Fabric Loading System – Industrial Spreading Line Unit Description For sale is a Gerber automatic fabric loading system (Model 250 LU), designed for seamless integration into industrial fabric spreading and cutting lines. This unit enables efficient, safe, and controlled handling of heavy fabric rolls, significantly improving workflow and reducing manual labor in high-volume production environments. The system has been operated as part of a complete and synchronized production line together with a GERBER SY 101 spreading system (unit 21 C) and a Lectra Vector VT-FA-MH-71 CNC cutting system (unit 29 C). This setup allows a continuous workflow from roll loading to spreading and cutting, minimizing downtime and maximizing throughput. The machine has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video in working condition taken 5.3.2026. Includes • Gerber automatic fabric loading unit • Motorized lifting and roller feed system • Adjustable frame structure • Integrated control panel and switches • Heavy-duty steel frame with wheels Technical Details • Manufacturer: Gerber Technology • Model: LS-250-LU (Loading Unit) • Year: 2004 • Serial number: 636 • Type: Automatic fabric roll loading system • Lifting capacity: up to 250 kg • Machine weight: approx. 300 kg • Voltage: 3 × 380 V • Frequency: 50 Hz • Current: approx. 10 A System Functionality • Automated lifting and positioning of fabric rolls • Precise alignment with spreading machines Njdey Av H Sspfx Afajcr • Smooth and controlled feeding into spreading systems • Mobile design allows flexible positioning between lines Production Advantages • Eliminates manual lifting of heavy fabric rolls • Improves operator safety and ergonomics • Reduces downtime during roll changes • Enables continuous, high-efficiency production flow • Ensures consistent material alignment for spreading Integration • Designed for use with Gerber spreading systems (e.g. SY 101) • Fully compatible with automated cutting lines (e.g. Lectra Vector systems) • Suitable for synchronized production environments Condition Used industrial condition Recently serviced on 27.02.2026 Operational prior to factory shutdown Typical signs of industrial use Inspection recommended prior to purchase Sold as-is, where-is, without warranty Typical Applications • Fabric spreading lines • Textile production workflows • Cutting room automation • High-volume garment manufacturing Location Valga, Estonia Removal & Transport Buyer responsible for dismantling, loading, and transport Professional handling recommended due to size and weight

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 9A5822, type of input current: three-phase, input voltage: 400 V, input current: 60 A, total height: 1,800 mm, cutting width (max.): 1,720 mm, cutting height (max.): 50 mm, compressed air connection: 6 bar, For sale is a Lectra Vectorfashion VT-FA-MH-71 automated CNC textile cutting system, offered as a complete industrial production line. This system is designed for high-volume, high-precision fabric cutting in garment manufacturing. It enables automated multi-layer cutting with consistent accuracy and significantly improves production efficiency compared to manual cutting processes. The machine has been operated as part of a dedicated and independent cutting line together with a GERBER SY 101 spreading system (unit 21 C) and a Gerber automatic fabric loader (unit 31 C). This configuration enables a fully synchronized workflow from roll loading to spreading and cutting, maximizing throughput and minimizing manual intervention. The system includes a long-format vacuum cutting table, gantry-mounted cutting head, and integrated extraction system. A computer-controlled interface ensures precise execution of cutting patterns and production workflows. The unit has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video recorded in operation on 05.03.2026. Includes • Lectra Vector CNC cutting system • Gantry-mounted cutting head • Conveyorized cutting surface • Industrial vacuum system (approx. 30 kW class) • Dust extraction system • Computer workstation and control interface Technical Details • Manufacturer: Lectra, France • Model: VT-FA-MH-71 • Serial number: 9A5822 • Year: 2009 • Type: Automated CNC textile cutting system • Control: Computer-controlled (Lectra software environment) • Cutting method: Oscillating knife, multi-layer capable • System: Vacuum hold-down with extraction Electrical & Utility Requirements • Control cabinet: approx. 230 V, single phase • Vacuum system: approx. 400 V, 3-phase, up to 30 kW • Peak current (startup): up to approx. 60 A • Compressed air: 5–7 bar, dry and filtered • Air consumption: required for tool operation and cooling Cutting Performance • Multi-layer cutting capability (approx. 25–70 mm compressed lay height depending on material) • High acceleration and cutting speed for reduced cycle time • Repeatable precision across full table width • Continuous feeding capability for long production runs System Architecture • Gantry-driven X/Y cutting head for high-speed positioning • Vacuum table with bristle block surface for material stabilization • Conveyorized system enabling continuous material feed • Integrated extraction system for dust and fiber removal Production Advantages • Significant material savings through optimized nesting and precise cutting • Reduced labor costs compared to manual cutting processes Ncedpfxjy Avg Ee Afaor • High throughput suitable for industrial-scale production Service & Condition Notes • Recently serviced on 27.02.2026 • Video available from operation (05.03.2026) • Machine was operational prior to factory shutdown • Typical wear consistent with industrial use • Software compatibility should be verified if upgrading control workstation Condition Used industrial condition Operational prior to shutdown Sold as-is, where-is, without warranty Typical Applications • Garment production cutting rooms • Workwear and denim production • Technical textile cutting • Upholstery and automotive textiles Location Valga, Estonia Removal & Transport Buyer responsible for dismantling, loading, and transport Professional dismantling required due to system size and complexity

Condition: used, functionality: fully functional, machine/vehicle number: 82415, type of input current: three-phase, total width: 1,500 mm, total length: 2,500 mm, input voltage: 400 V, input current: 16 A, cutting height (max.): 100 mm, 114 A – BERGMAN & JOHANSSON 420 Bandknife Fabric Cutting Machine – Industrial Precision Cutting Unit Description For sale is a Bergman & Johansson industrial bandknife fabric cutting machine, model Type 420, manufactured in Sweden. This machine is designed for high-precision cutting of stacked textile materials using a continuous vertical bandknife system. It is a core component in professional garment cutting rooms, especially suited for detailed shaping of components such as collars, sleeves, and smaller pattern pieces. The system has been used as part of a dedicated cutting workflow together with Finn-Convey spreading tables (unit 22 C), enabling efficient transition from fabric spreading to precision cutting. The long-arm C-frame construction allows handling of large fabric stacks, while maintaining excellent control and cutting accuracy. The machine was in production use prior to factory shutdown and has been serviced on 27.02.2026. Technical Details • Manufacturer: Bergman & Johansson i Borås AB, Sweden • Model: Type 420 • Band length: approx. 4200 mm • Serial number: 82415 • Machine type: Industrial bandknife fabric cutting machine Motor Specifications • Manufacturer: Leroy-Somer • Type: LS 80 P • Power: 0.75 kW • Speed: approx. 1410 rpm • Voltage: 380–400 V (3-phase, star connection) • Current: approx. 2.0 A (Y) / 3.45 A (Δ) • Frequency: 50 Hz • Protection class: IP54 Machine Features Njdpfx Asy Au Hqefascr • Continuous vertical bandknife for precision cutting • Long-arm (C-frame) design for large cutting areas • Integrated cutting table with smooth surface • Adjustable blade guard for safety and accuracy • Built-in sharpening system for continuous blade maintenance • Heavy-duty industrial construction • Mobile base with wheels for flexible positioning Cutting Capabilities • High-precision cutting of multi-layer fabric stacks • Suitable for both straight and complex contour cutting • Ideal for detailed garment components and templates • Clean and accurate cuts across various textile types System Characteristics • Table-based cutting process, material is guided manually • Optional air table functionality (depending on configuration) to reduce friction • Stable blade tracking and tension system for consistent performance • Designed for continuous industrial operation Condition Used industrial condition Serviced on 27.02.2026 Machine was operational prior to factory shutdown Typical wear consistent with industrial use Inspection possible prior to dismantling Sold as-is, where-is, without warranty Applications • Precision cutting of fabric stacks • Garment component cutting • Denim and workwear production • Textile cutting rooms • Small to mid-scale production setups Location Valga, Estonia Dismantling & Transport Buyer responsible for dismantling and transport Professional dismantling recommended

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: Custom made, type of input current: three-phase, total width: 1,800 mm, total length: 14,650 mm, input voltage: 400 V, input current: 16 A, cutting width (max.): 1,800 mm, 22 C – Finn-Convey Industrial Spreading Line (14.65 m x 1.8 m) – Complete with Air-Flotation Description For sale is a professional-grade Finn-Convey industrial fabric spreading and cutting table line, offered as a complete production-ready system. This system is designed for efficient fabric spreading and preparation in high-volume cutting room operations. It enables controlled handling of heavy fabric rolls, precise layer alignment, and smooth material flow prior to cutting. The line has been operated as part of a dedicated production setup together with a Bergman cross cutting saw (unit 114 A). This combination allows efficient pre-cutting of fabric rolls into required lengths before spreading, significantly improving workflow efficiency and reducing manual handling. The equipment has been used in a professional garment factory and was operational prior to factory shutdown. Key Technical Specifications • Total length: 14.65 meters (modular structure, adjustable configuration) • Table width: 1.80 meters (suitable for wide fabrics) • Technology: Air-flotation table system for low-friction material handling • Drive system: Motorized side drive units ensuring controlled spreading tension System Components • Finn-Convey motorized side drive units • Industrial air-flotation table structure with perforated surface • Integrated blower system with centrifugal fans under tables • Electrical control cabinet for system operation • Fabric roll handling stands and support assemblies • Integrated end cutting unit with circular blade system Cutting Unit Technical Details • AC speed-controlled motor (Taili Motor Co., Ltd., approx. 90–200W range)14650 • Gear reduction unit (e.g. 5GN-series) for high torque output • Circular cutting blade with integrated sharpening mechanism • Adjustable vertical guide rails for cutting height positioning Nedpfey Au Aljx Afascr • Designed for efficient cutting of multi-layer fabric stacks Auxiliary Drive Components • Auxiliary induction motor (e.g. 40W class, speed-controlled) for fine positioning and movement control • Gear-driven transmission for stable and continuous operation • External capacitor-based start system (typical for single-phase auxiliary motors) System Architecture • Modular table construction allowing flexible layout adjustments • Air-assisted material movement reducing friction and operator effort • Cradle-type roll handling enabling tension-free fabric feeding • Encoder-based or mechanical length control depending on configuration • Compatible with upstream roll cutting equipment and manual or semi-automatic workflows Production Advantages • High efficiency with long cutting layouts and reduced material waste • Excellent ergonomics, heavy fabric stacks can be moved with minimal force • Accurate layer alignment supported by controlled drive system • Integrated cutting capability improves workflow continuity • Suitable for a wide range of materials including denim, upholstery, and technical textiles Condition Used industrial condition Removed directly from production after factory shutdown Typical signs of use from industrial environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Location Valga, Estonia Removal & Transport Buyer responsible for dismantling, loading, and transport Professional dismantling strongly recommended due to system size and electrical installation

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: FC24DE9128, type of input current: three-phase, total width: 2,800 mm, total length: 1,800 mm, input voltage: 400 V, input current: 32 A, working width: 1,800 mm, total height: 1,800 mm, repeat accuracy: 0.1 mm, feed rate Z-axis: 100 m/min, cutting width (max.): 1,800 mm, cutting height (max.): 25 mm, compressed air connection: 6 bar, For sale is a high-end Lectra Vectorfashion automatic CNC fabric cutting system, model VT-FA-Q2-72. This system represents modern industrial cutting technology and has been taken into use at the beginning of 2025. The system has been used in professional garment production and is designed for high-volume, precision cutting with full CAD/CAM integration. It is a complete large-format cutting solution including vacuum table, automated cutting head and computerized control system. The machine is fully operational and has been recorded in production use on 05.03.2026. Originally purchased new for approximately 125,000 EUR. Technical Details • Manufacturer: Lectra • Model: Vectorfashion VT-FA-Q2-72 • Type: Automatic CNC fabric cutting system Nedpfx Ajy Akbqsfaecr • Year: 2024/12 • Control: Computerized CNC system (VectorControl environment) • Cutting type: High-speed knife cutter • Vacuum cutting table with hold-down system • Multi-layer cutting capability • Industrial servo motors • Full CAD/CAM compatibility Electrical & Connections • Type of input current: 3-phase (3-Phase + Neutral + Earth) • Input voltage: 400 V (EU standard) • Input current: approx. 32 A (depending on vacuum turbine configuration) • Compressed air connection: 6 bar (dry, oil-free air required) Dimensions & Working Area • Working width: 1800 mm (72”) • Max cutting width: 1800 mm • Max cutting height: approx. 25 mm (compressed with vacuum) • Total width: approx. 2800 mm (incl. electrical cabinet and access space) • Total length: approx. 4500 – 5500 mm (depending on unloading table configuration) • Total height: approx. 1800 mm Performance & Accuracy • Feed rate (X/Y axis): up to 100 m/min • Repeat accuracy: ±0.1 mm (industrial IX-series standard) Key Features • High-speed automated CNC cutting • Precision multi-layer processing • Advanced vacuum hold-down system • Modular cutting bed design • Fully computer-controlled operation • Integrated safety and emergency stop systems • Industrial-grade construction for continuous production Condition Used production condition Operational and tested in real production Inspection possible prior to dismantling Sold as-is, where-is, without warranty Line Integration The system has been operated as part of a complete cutting line together with • 30 C – Finn-Convoy Spreading / loading system • 32 C – Gerber Conveyor / table system All units are available separately or as a complete production line Applications • Garment factories • Denim production • Workwear and uniform manufacturing • Technical textiles • High-volume automated cutting environments Location Valga, Estonia Dismantling and transport Buyer responsible Professional dismantling recommended due to system size

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Barberan laminating machine for door frames Njdpfey Aibcjx Afaocr

Condition: new, Year of construction: 2024, Eastman BLUE STREAK 629X – 6" Up-and-Down Cutter – New in Box – Made in the USA – Direct from Stock – €2,500 excl. VAT (excl. shipping) For sale: brand new Eastman BLUE STREAK 629X, available immediately from stock. ✔ New / unused – in original box ✔ Up-and-down cutting machine – ideal for cutting textiles, fabrics, and medium to heavy materials ✔ 6-inch blade – precise and powerful cutting Njdpfowi Nvgex Afascr ✔ Made in the USA – reliable and durable construction ✔ Heavy-duty 380 Volt – industrial power specification ✔ Robust and long-lasting – suitable for professional workshops and industrial use ✔ Ready for immediate use in workshops or production Special price for quick sale: €2,500 excl. VAT (shipping not included) First come, first served – available immediately For more information or to arrange a viewing, feel free to send a message. Keywords: industrial cutter for sale textile cutting machine up-and-down cutter professional cutting machine cutting machine for workshops industrial cutting equipment heavy-duty cutter

Condition: ready for operation (used), Year of construction: 2004, ➢ Speed 10-80 m/min. Nodpfxeyzciks Afajcr ➢ Minimum Sheet Size: 22 x 30 cm ➢ Maximum Sheet Size: 72 x 102 cm ➢ Sheet Production: >10.000/h ➢ Sheet Weight SF: 100-600 g/m2 ➢ Adhevise Application SF: 1.5 – 4.0 g/m2 ➢ Working Width 72 cm ➢ Film Thickness 10-50 µM ➢ Film Roll Diameter 350 mm ➢ Energy Consumption 24/66 kW ➢ It is Very Good Condition ➢ Available Immediately.

Condition: excellent (used), functionality: fully functional, Thermal laminating machine complete with: Automatic Feeder, Pneumatic Pressure Roller, Pile Delivery, Jogger Nsdpfxjyyyrae Afascr

Condition: good (used), Year of construction: 2020, functionality: fully functional, type of input current: three-phase, total width: 4,500 mm, total length: 4,500 mm, input voltage: 400 V, working width: 2,000 mm, cutting width (max.): 2,000 mm, We offer a camera-assisted CNC cutter for single-layer cutting of textiles and leather. With the integrated image processing system, shapes and designs can optionally be recognized and cut with precision. The machine has low operating hours and is in perfect working condition! Njdpfsyx I Duox Afaecr

Condition: excellent (used), Year of construction: 2009, operating hours: 110 h, functionality: fully functional, type of input current: three-phase, overall weight: 3,500 kg, Coating and laminating system. For paper and film. Rewinding and unwinding with automatic web edge and web tension control. Laminating unit is cooled. Max. 30 m/min. Working width 650 mm. The machine was only used in the laboratory for tests. Only 110 operating hours since new Hotmelt or dispersion can be used. Hotmelt is melted in a separate extruder and fed to the application unit via a heated hose. Roll or reverse roll is possible. Powerful IR dryer . Exhaust air system and cooling unit can be included. Ma. Roll diameter 800 mm. Core 3 1/2 ". Pneumatic winding shafts. Nsdpfx Afert Iqbjaocr

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, type of input current: AC, Equipment: compressor, Foliant VEGA 400a Fully Automatic Laminating Machine Nodpfsyxyzrsx Afaecr

Condition: excellent (used), Overview Now in stock at Glendale we have this Refurbished Foliant Vega 400A Automated Laminator with Digital Foiling. This B3+ laminator has been fully refurbished to excellent working condition and is designed for heavy duty digital output and B3 litho lamination. The Vega 400A is a compact industrial laminating machine capable of speeds of up to 18 metres per minute, producing over 2,000 SRA3 sheets per hour. It features a deep pile vacuum feeder, high speed bump separator, and non-stick pressure roller, ensuring reliable feeding and consistent lamination quality across both digital and offset printed sheets. The system includes an adjustable twin decurl unit for offset and digital prints, a digital foiling module for foil, holographic, glitter, and spot-UV style finishes, and the optional jogger reception unit for neat sheet delivery. The integrated pneumatic compressor allows the machine to operate without any external air supply, making it a versatile and compact finishing solution. The system has seen light use within a small digital printing operation and has processed under 75,000 laminated sheets since new. Key Features Rising pile vacuum feeder with belt head Built-in Becker vacuum pump Quick change film shaft with tension control Film capacity up to 3000 metres (22–42 micron) Inline trim slitter and perforating wheel Twin adjustable decurl system Heated chrome laminating roller Pneumatically adjustable pressure High speed bump separator Touchscreen control system Optional jogger reception included Why Buy the Refurbished Foliant Vega 400A? The Refurbished Foliant Vega 400A provides a highly productive and versatile laminating solution for print businesses producing both digital and offset work. Key benefits include: Production speeds of up to 18 metres per minute Output of over 2000 SRA3 sheets per hour Integrated digital foiling capability for premium finishes Twin decurl system for digital and litho prints Integrated compressor – no external air supply required Compact industrial footprint Fast warm-up time of under 10 minutes Optional jogger delivery included This system allows printers to produce high quality laminated products while also adding premium finishing effects such as digital foil and decorative lamination. Specifications Manufacturer Foliant Model Vega 400A Max sheet size 380mm x 660mm Min sheet size 200mm x 200mm Paper weight 115gsm - 500gsm Ncjdpfx Aeyxp Nxofajr Max speed 18 metres per minute Laminating roller pressure Pneumatic Feeder Automatic Suction Vacuum Belt Seperator Automatic bump rollers Decurl bar Standard - in run adjustable Air compressor Integrated as standard Warm up time 8 minutes Temperature range 80 - 140°C Jogger reception Included Power requirement 230/240v 50/60Hz Machine weight 370kg Machine dimensions with jogger (L)1980mm x (W)820mm x (H)1230mm

Condition: good (used), Foliant Mercury 760 NG Laminating Machine The most equipped laminating machine in Foliant’s offer. Fully automatic machine, ideal for digital printing houses. Very good condition, ready to work. Year of production 2019. Description: – feeding from a high stack, head on a servo motor (elevator) – automatic separator – pneumatic roller pressure – sheet straightening module – built-in Becker compressor – jogger on sheet collection – gilding module, rewinder Feeding system: servo motor head Max sheet size: 76×110 cm Min sheet size: 25×32 cm Max. capacity 1300 sheets B1 / h Max lamination speed: 20 m / min Temperature: 80 – 140°C Heating time 8 min Installed power: 6000 W -Power supply 380V Weight 810 kg Ncodpfx Ajyun Tajfasr

Condition: used, Year of construction: 2005, Year – 2005 Max sheet size – 1650 x 1650 mm Min sheet size – 500 x 500 mm Max output – 8,000 sheets/hour Ncodpfxjyw Hv Hs Afajr Automatic upper sheet feeder – suction feeder Automatic lower sheet feeder – belt feeder Press section for laminated sheets Pallet delivery

Year of construction: 2009, condition: excellent (used), functionality: fully functional, Foliant Gemini 400G Automatic Laminator Fully Automatic Digital Print Laminating Machine. Deep Pile Auto Feeder - 300mm Paper stack capacity Max sheet size B3 (380mm wide) Max production speed 15 m/min ( 1,800 x SRA3 sheets per hour) Built-in compressor for high-pressure laminating rollers. Auto-control for miss-sheet detection and quality control. Ncodpfovrd E Ajx Afajr Large roll film capacity. (up to 3,000 m) In-line sheet separation. Delivery into a paper jogger 220/240 volt - 50Hz

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, total width: 1,800 mm, total length: 5,000 mm, 1x CNC CUTTER CT-163MB V2 Nsdpfx Afjywzkxjaecr Effective working width 1650 mm Cutting window length 4500 mm Dsbig Eqasywzkxeaekk Total length about 6000 mm Design: stationary cutting machine, with linear guidance in the X and Y direction for high mass acceleration Brushless torque servo motors OMRON. Operating system Windows 7 Ultimate 1 Laying machine Manual feeding of the laying wagon Inc. Edge control and automation. Cutting machine Supply via servo motor control assembly is carried out on the CNC cutter

Condition: good (used), Build in 2006 Ncjdpfsgyzzuox Afasr Komfi Aspira Laminating machine Max laminating speed 15 m/min Max sheet width 52 cm Sheet size max. 52x74 cm; min. 20x20 cm Paper weight . 115-350g/sqm.

Condition: good (used), Foliant Vega 400A Laminating Machine The most equipped laminating machine in Foliant’s offer. Fully automatic machine, ideal for digital printing. Very good condition. Year of manufacture: 2015. Description: – High stack feeding (elevator) – Automatic separator – Pneumatic roller pressure – Sheet straightening module – Built-in compressor for blowing and vacuum (Becker) – Jogger on the sheet outlet Feeding system: Pneumatic belt Feeding stack height: 30 cm Max. Capacity: 2100 B3 sheets/h Maximum lamination speed: 18 m/min Nsdpsyrz Rtsfx Afaocr Temperature: 20 – 140°C Heating time: 8 min Installed power: 3000 W Power supply: 230V Weight: 320 kg Made in the Czech Republic.

Condition: excellent (used), Year of construction: 2018, total width: 2,200 mm, total length: 1,800 mm, cutting width (max.): 1,600 mm, cutting machine and spreading table are in good condition and in active status. mainly used for customized sportswear, low volumes. carriage of spreading table in brand new condition (with beltsystem) extra sample movies can be sent over mobile Nedpfeyvlmusx Afascr