Used Fabric Cutter for sale (6,197)

Condition: used, Year of construction: 1977, max. grinding diameter 400 mm grinding width 0 mm max. module min. module total power requirement 3 kW weight of the machine ca. 4,2 t dimensions of the machine ca. m Shaver cutter Ø, min./max. 64 - 320 mm Module range 1 - 12 Shaver cutter width, max. 40 mm No. of teeth 13 - 240 Pitch block Ø 73 - 320 mm Speeds of workpiece slide 5 / 20 / 30 / 40 teeth per min. Grinding slide speed 690 rpm Grinding slide Ø 762 mm Grinding wheel swivelling (pressure angle) 5 - 21 ° Grinding slide swivelling (helical angle) 2 x 35 ° Grinding slide adjustment, vertical 240 mm Cutting speed 1 / 0.5 / 0.25 m/min Spindle drive 1.1 kW Total electrical load, approx. 3 kW - 500 V - 50 Hz Weight, approx. 4,200 kg Accessories / Special Features Pgedpfxot Hwnvs Amyop * Machine is suitable for grinding internal and external shaver cutters. It is also suitable for master gears as well as cutters for gear shapers. Unfortunately the machine does not have many accessories. It would therefore be a good investment as a second machine if you already have suitable accessories available.

Condition: used, Year of construction: 1994, workpiece diameter 110 mm Psdpjt Hw Nmefx Amyjgp grinding length 410 mm clamping length 20 mm total power requirement 0,25 kW weight of the machine ca. 500 kg dimensions of the machine ca. m Profile Tool Grinder for Chamfer Angles, accessories

Condition: good (used), Offer includes: Polar 92X, year of manufacture 2005, approximately 700,000 cuts, including spare blades, side cast-iron tables, inspection and demonstration possible, immediately available. Podezkwtmopfx Amyjgp

Condition: excellent (used), functionality: fully functional, Format 880/640, pneumatic clutch Pgodpfxeygl Ule Amyep

Condition: excellent (used), Tool and cutter grinder AUTOOL model VS300 Pgsdpfxsxfk T Ae Amysp

Condition: like new (used), Tool and cutter grinder GRIFO model U10 Pgedpfx Amjinbileyep

Condition: good (used), Uchida Aero Cut One Creaser, Slitter, and Cutter The machine is fully operational and ready for production. Description: The AeroCut One cuts, perforates, and creases sheets in a single pass. Only one person is needed to operate the device, significantly improving work efficiency and, consequently, reducing costs. The device is programmed using an intuitive touchscreen control panel. Cutting, creasing, perforating Maximum paper size – 370 x 520 mm Min. paper capacity – 55 x 45 mm Maximum grammage – 400 g/m² Speed ​​– 11,130 business cards/h Paper types – offset, coated paper, varnished Feed – belt with adjustable vacuum Creasing – strip-type Memory – 263 programs + 150 user-defined Touchscreen programming PC connectivity Double-feed detection Weight: 240 kg Power supply: 230 V Pgjdeziyrpopfx Amyep Made in Japan.

Condition: like new (used), Year of construction: 2020, Shaper Origin Weight: 6.75 kg Description: Shaper Origin is the world's first handheld CNC milling machine, allowing you to easily integrate digital precision into your familiar workflows. Additional description: Thanks to its intuitive operation, automatic milling correction, and on-tool CAD, it simplifies many processes in your workshop, making them more precise and efficient. Create and edit projects directly via the touchscreen on the tool or import designs from your software. Use Origin flexibly wherever you need it, whether in the workshop or on the construction site. Whether for recessing fittings, creating inlays, or making perfectly fitting joints, Origin offers versatile, professional, and creative application possibilities. Features: Designed for woodworking, with a familiar form factor. Work on site with virtually any size workpiece. Pgjdpfezlwduex Amyjp Design and mill perfect contours, joints, and engravings. No CAD knowledge required. On-tool design. Automatic milling correction. Intuitive operation. 8mm collet allows for the use of many milling cutters. Scope of delivery: Shaper Origin with Shaper SM-1 spindle Shaper Systainer³ T-Loc Two rolls of ShaperTape (45 m each) Tool for changing milling cutters Reusable transport locks USB A/C stick Various milling cutters Technical data: Height: 306 mm Depth: 227 mm Width: 339 mm Weight: 6.75 kg Year of manufacture: 2020 Absolutely new, from a training workshop Workstation available at an additional cost of 350.

Condition: good (used), Height 2300 Width 2700 mm Length 2200 mm Weight 5000 kg Pedjrn S Azepfx Amysgp Voltage Electrical: 400V 50Hz 3N Installed Power 102 kw Main material Stainlees Steel Cutter Type Vacuum Bowl Cutter Bowl made of Stainless steel Bowl capacity 200 l Knives amount 6 pc. Knife shaft revolutions 680-5050 rpm Bowl revolutions 4-16 rpm

Condition: good (used), D and D Stainless cutter Stainless guillotine, mounted on conveyor, previously used for cutting cakes and honeycomb, conveyor dimensions 2200mm x 640mm, adjustable dwell and cutting time, variable speed, 3Ph Pgsdpfxerwz I Ae Amyjp

Condition: excellent (used), NNP Cheese block cutter Podpfx Amjwtilpsyegp Stainless, pneumatic cheese block cutter with stainless outfeed conveyor, max block 350mm w x 200mm h,

Condition: used, Year of construction: 2020, functionality: fully functional, AL-2400 mm SS PP Spun-Bond Machine Line ( Filament 1.5D-1.8D ） -Raw Material： Polypropylene granule，master batches，additive Pjdezlg Iiepfx Amyogp -Production Process: With high temperature filament drawn, certain proportion of polypropylene, master batches and additive are drawn into net by negative pressure, which are boned together being into fabric by calender. -Annual Output: 4800 Tons/Year（30gsm） -Fabric GSM: 9-60 g/m2 -Installed power: Around 1500KW

Condition: used, Year of construction: 2005, functionality: fully functional, collet bore: 18 mm, spindle speed (min.): 2,800 rpm, grinding wheel diameter: 100 mm, type of input current: three-phase, overall weight: 45 kg, total height: 350 mm, total length: 400 mm, total width: 450 mm, Equipment: lighting, Stichelschleifmaschine Pregraph U2 Year of manufacture: 2005/11 Type: Tool grinding machine U2 For grinding scribing tools, milling cutters and all round parts. The machine is a Taiwanese replica of the well-known German model, but with an improvement: the grinding wheel can be adjusted axially to the dressing tool, thus maintaining the setting. There are many replicas, but most are not suitable for professional use. We use this machine ourselves in our workshop and it is equal to the German original. Motor power: 0.25 kW Speed: 2800 rpm Grinding wheels: Ø 100 mm Dimensions: 450 x 400 x 350 mm Weight: 45 kg Included: 1 pc. cup grinding wheel for steel/HSS, used 1 pc. cup grinding wheel for carbide, used 1 pc. diamond cup grinding wheel for carbide, used Psdpfx Amszldwneyegp 1 pc. cut-off wheel Ø 100 x 1 for steel/HSS, used 1 pc. holder for cut-off wheel 35 pcs. collets Ø 0.5 to 17.5 in 0.5 increments 16 pcs. collets (e.g. 1/8" and special sizes, some duplicated) Machine light Operating manual Optional: NEW, unused stock items: Collets type 355E; from Ø 0.5 to 18 mm, in 0.5 mm steps and fixed collets Ø 18 / 20 / 25 mm Cup grinding wheel Ø 100 x 50 mm for steel/HSS, grit 80 (medium) Cup grinding wheel Ø 100 x 50 mm for steel/HSS, grit 120 (fine) Diamond cup grinding wheel Ø 100 mm for carbide, grit D126 (medium) Diamond cup grinding wheel Ø 100 mm for carbide, grit D64 (fine) Cut-off wheels Ø 100 x 1 mm Flanges for grinding wheels, also with balancing option Balancing stand with mandrel for balancing grinding wheels Tool bit grinding attachment Drill bit grinding device Base cabinet Dimensions: 445x345x840 mm Weight: 26 kg

Condition: excellent (used), Urschel GRL strip cutter for French fries. The machine has been serviced and is ready to work. SPECIFICATIONS Length: . . . . . . . . . . . . . . . . . . . . . . 59.25" (1505 mm) Width: . . . . . . . . . . . . . . . . . . . . . . . 63.38" (1610 mm) Height: . . . . . . . . . . . . . . . . . . . . . . 53.24" (1352 mm) Net Weight: . . . . . . . . . . . . . . . . . . . . . 906 lb (411 kg) Motor: . . . . . . . . . . . . . . . . . . . . . . . . . . 2 HP (1.5 kW) The Urschel® Model GRL is designed specifically for strip cutting plain and crinkle cut potato strips. Transverse fracturing and feathered edges of french fry pieces are minimized and longer cuts are produced with greatly reduced scrap. The machine features continuous operation for uninterrupted production, and simplified design for easy cleanup and maintenance. Pgjdpsv Srfqofx Amyjp Maximum product infeed is 9" (229 mm) in length.

Condition: reconditioned (used), Number of milling spindles 2 St. fence ja ja /nein workpiece ja STEGHERR Cross-bar Milling Machine, Type KSF-mini ----- Specialized milling machine for the efficient production of intersecting muntin bar joints. The KSF-mini muntin bar milling machine embodies STEGHERR's extensive experience in manufacturing specialized milling equipment for intersecting muntin joints. Pgedpfx Amozip Nwoyep The KSF-mini enables the rapid and precise production of all standard intersecting muntin joints encountered in practice. Muntin bars that have already been profiled can also be processed on the KSF-mini. Precise milling is achieved because the workpiece is machined on three sides in a single clamping operation. The tools are driven by two three-phase motors; workpiece clamping is pneumatic. The profile cutter is designed to match the web width. The saw blades that perform the lap-joint cut can be adjusted to the profile cutter's dimensions using spacer rings. The machine is designed for a maximum workpiece cross-section of 56 x 46 mm. - Motor: 2.2 kW, 380 V, 50 Hz - Pneumatic pressure: 6 bar Includes: ----- - Machine stand - Foot pedal control - NEW ORIGINAL stop rail with scale and sliding stop featuring an optical setting aid, as shown in the photos. Tools as shown in the photos: 1 Profile cutter 3 Saw blades (corresponding to a web width of 10 mm) Footprint approx. L x W x H: 1,330 x 570 x 1,430 mm Weight: approx. 150 kg ----- (All technical specifications provided by the manufacturer; no liability assumed!)

Condition: good (used), Year of construction: 1995, Macmon M 100 E tool milling machine with 3-axis Elesta-Heidenhain digital display from the training department, rigid table, SK 40 spindle mount. Good working condition, can be demonstrated under power by arrangement. Pgodpfx Asv Azb Nomyop

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden (at tel. number). Greentec HS 212 Branch Cutter / incl. MS08 adapter plate / NEW unit / in stock & immediately available Price: €6,290.00 net / €7,485.10 gross Pgsdpfozk S Tbox Amysp - Working width: 2,100 mm - Cuts per minute: 250 - 450 - Max. branch diameter: 60 mm - Oil flow: 50 l/min - Pressure: 190 bar - Working speed: 5 km/h - Weight: 132 kg Optional: Flow divider with pressure relief valve - freely adjustable (50-90 l/min at 190 bar) = €660.00 net Description: - Clean and smooth cut of small branches and larger limbs up to max. 60 mm diameter - Sturdy frame beam made of high-strength steel - Lightweight construction - Low weight and flat housing for optimal visibility - HIGH-POWER blade drive via planetary gearbox with constant torque during direction changes - 100% linear blade movement thanks to a cast iron constant power motor - Max. 450 cuts per minute - PRO CUT blade (Made in Germany) - Fine-toothed double-cut blades (ground on both sides) increase both the surface quality and the working capacity - Special blade guide made of wear-resistant plastic ensures smooth operation and long service life - Blade fingers with branch-saving function = remaining branches are not damaged - Long service life thanks to hardened and galvanized material - Easy and quick blade change - Sliding skid prevents damage from ground contact - Minimal wear and low maintenance - High working speed up to 5 km/h - Variable mounting position of the blade bar - Required hydraulic connections: 1x DW (1x supply + 1x return) Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. In our warehouse, we have a very large selection of various Greentec products that are immediately available! Mr. Herden (tel. number) will be happy to assist you. On request, we will also be happy to provide you with a financing offer. We are an official Westtech sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Gierking GMT sales and service partner. We are an official Weber MT sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We will supply you with the complete Seppi M. range! Errors and prior sale excepted! = Further information = New: Yes Part suitable for: Application forestry Please contact Marius Herden for more information.

Condition: new, Technical Data: Fixed angle table: Clamping surface of the fixed angle table: 800 x 400 mm Max. table load: 200 kg Working spindle: Tool holder, horizontal and vertical: ISO 40 Power of the main drive motor / 100% duty cycle: 2.2 kW Vertical milling head: Speed range, stepped: (12) 50 - 2000 rpm Drill quill, stroke: 100 mm Swivel range: +/- 90° Travel distances: X-axis, automatic/manual: 385/400 mm Y-axis, automatic/manual: 185/200 mm Z-axis, automatic/manual: 365/380 mm Feeds: Feed range: 0-650 mm/min Number of feeds: continuously adjustable Rapid traverse: 1000 mm/min Features: - Machine accuracy according to DIN 8615 - 3-axis digital displays FAGOR® Innova (option) - Spindle runout max. 0.005 mm, incl. test report according to DIN 8615 (roller bearings SKF®/NSK®) - Vertical milling head can be swiveled for horizontal milling (without disassembly) - All critical parts of the machine, e.g. machine frame, table, milling head, housing, etc., are made of stress-relieved MEEHANITE® quality cast iron (FC 30) and are extensively ribbed to provide the machine with maximum stability and working accuracy. All guide rails are coated with TURCITE®-B - All machined surfaces in the working area, such as guide rails, table surfaces, T-slots, etc., are hardened and precision-ground. - The powerful drive transmits the power of the main motor to the gearbox via belts. - All axes have their own DC servo motors. These enable sensitive, stepless adjustment of the feed speed. Standard equipment: Pjdpfxed R S Nds Amyogp - DC servo motors for all axes X/Y/Z, incl. electromagnetic brake - Fixed box table - Original Ganter Norm® safety handwheels - Chip collection tray - Backlash-free HIWIN® precision ball screws in all axes X/Y/Z - Gearbox for main spindle - Safety device according to CE or better: - Spindle guard with several micro-switches, adjustable in several steps (enclosure available as an option) - Two emergency stop pushbuttons (1 x machine frame, 1 x control panel) - Mechanical Ganter Norm® safety handwheels in all axes - Electromagnetic spindle brake (for immediate spindle stop) - Electrical overload protection for all axes - Electrical equipment SIEMENS®, BALLUFF® - Braking system prevents the table from dropping - Three reducing sleeves SK 40 to MK 1, 2, 3 - Collet chuck with holder according to DIN 2080 incl. collet set (Ø 6, 8, 10, 12, 16, 20, 25 mm) - Draw-in thread spindle - Horizontal milling arbor (Ø27 mm) - Automatic central lubrication - Lamellar stainless steel cover for the Z-axis guide rail in the working area - Machine light - Coolant system integrated in the machine base - Test report according to DIN 8615 - Operating tool - Machine according to CE - Operating manual, parts list, incl. electrical wiring diagrams, etc.

Condition: used, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, Milling machine, second-hand Make: Fadal Model: 904-1 VMC 3016 Year of manufacture: Serial No. 9401487 Technical data: X-travel 762 mm Y-travel 406 mm Z-travel 508 mm Podpfotud Utjx Amyogp Spindle holder: SK 40 Spindle speed 8000 rpm Machine weight: 3800 kg

Year of construction: 1966, condition: used, machine/vehicle number: 12558, Saw motor, 2.2 kW 40 mm spindle Sliding carriage with short Festo Superfix Milling stop with fine adjustment, without dust extraction port Pjdpsigab Rsfx Amyjgp Dust extraction with slotted hood, 140 mm Cable + plug, 16 A

Condition: good (used), Year of construction: 2008, functionality: unexamined, - including tools Pgodpey S Tn Esfx Amyep

Condition: used, Year of construction: 2022, Manufacturer: NOMA-Nowicki Model: Typhoon KN-60 Year: 2022 Condition: Used Serial Number: 52022220 Stock Number: 3374 Bowl: 60 litres Bowl speed: variable speed, 2 - 15 RPM Knives: variable speed, 200 - 6000 RPM Podpoy Th Uiefx Amyogp Mixing: 2 reverse mixing speeds Power: 3 x 400V, 50Hz, 21kW Dimensions: 1100 x 1600 x 1200 mm Weight: 1325 kg

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: S2501CV, cutting width (max.): 1,600 mm, cutting height (max.): 25 mm, Bullmer CNC Cutter Turbocut S2501CV – reliable and ready for immediate use For sale is a Bullmer CNC cutter, model Turbocut S2501CV, manufactured in 2004, in good and fully functional condition. The machine operates reliably and is ready for immediate use. The following have already been replaced: Knife motor – new Controller – new In addition, two original Baldor replacement controllers are included in the scope of delivery – ideal as a spare and for long-term security. The cutter is ideally suited for professional use and impresses with its proven Bullmer quality. Inspection and test run can be arranged at any time. Pedpfx Amey Tl Nwsysgp

Condition: like new (used), Year of construction: 2022, functionality: fully functional, total length: 3,150 mm, total width: 1,315 mm, total height: 1,665 mm, overall weight: 800 kg, input voltage: 380 V, type of input current: three-phase, power: 8 kW (10.88 HP), Equipment: documentation/manual, Marel I-Cut 130 PortionCutter – Like New, Minimal Usage For sale: Marel I-Cut 130 PortionCutter, a high-end intelligent portion cutting machine designed for fresh boneless meat products. One of the most advanced and accurate portioning systems available on the market. The machine was purchased brand new directly from Marel in 2022 for a dedicated production line. Due to changes in our production setup, the machine has seen very limited use and remains in outstanding condition, close to new. Ideal for: * fresh boneless meat processing * pork loin, pork chop, neck, breast, fillet, etc. Podpfey Uaa Tsx Amyjgp * fixed-weight and fixed-length portioning * industrial meat processing and retail production Main Features: * high-speed intelligent portion cutting system * advanced laser and 200 Hz camera scanning technology * precise fixed-weight and/or fixed-length cutting * multiple cutting angles: 45°, 55°, 65° and 90° * user-friendly touchscreen interface * fully stainless steel hygienic construction * automatic belt speed adjustment * servo motor technology for extremely accurate cuts * remote access support via Secomea * engineered for easy cleaning and sanitation Technical Specifications: * Model: Marel I-Cut 130 * Year: 2022 * Weight: approx. 750–850 kg * Dimensions: approx. 3150 x 1315 x 1665 mm * Power supply: 380–480V * Power consumption: approx. 8 kW * Food-grade stainless steel construction Additional Information: * Excellent condition / minimal operating hours * Purchased new directly from Marel * Available for inspection and testing * Perfect for meat processing facilities looking for premium precision cutting equipment

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Inline Cutter/Emulsifier Brand: Inotec GmbH Model: I175CDI-75 Machine number: 103-00605 Year of manufacture: 2007 Voltage: 230/400 V, 50 Hz, 152 A Pgodpfx Amswxza Njysp Power: 91 kW, 106 kVA Dimensions: 2000 mm x 900 mm x 850 mm With distribution cabinet Dimensions: 1200 mm x 600 mm x 2100 mm