Used Extruder Screws for sale (5,281)

Condition: new, Year of construction: 2026, CORMAK LUFT 1500 VSD+PM Compact screw compressor with dryer – compact set for demanding applications – ENERGY SAVER SET INCLUDES: LUFT 1500 VSD+PM COMPACT screw compressor with dryer. Horizontal compressed air receiver 500 L. Key features that distinguish these models: 1. Permanent Magnet (PM) Motor Technology Most Energy Saver compressors use Permanent Magnet motors. Unlike standard induction motors: They achieve efficiency levels compliant with IE4 or even IE5 standards. They maintain high efficiency even at very low speeds, where standard motors lose performance. They are smaller, lighter and generate less heat. 2. Advanced Inverter Control (VSD) The core of the Energy Saver line is a frequency converter (inverter). Demand matching: The compressor does not operate on an “all-or-nothing” basis. If your system requires only 30% capacity, it reduces speed accordingly, consuming proportionally less energy. Elimination of idle operation: Conventional compressors often run unloaded for several minutes after filling the tank, consuming around 25–30% of rated power without producing air. Energy Saver models virtually eliminate this loss. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz, eliminating current surges at start-up, which: Protects the plant’s electrical installation. Allows frequent start-stops without overheating the windings. 4. Real Savings In practice, Energy Saver technology reduces electricity bills by 30% to 50% compared with fixed-speed compressors. It also maintains very stable network pressure (within 0.1 bar), essential for precision equipment such as laser cutters. Extended service life: Smooth pressure and temperature changes prolong screw element life. Technical Parameters Motor power 11 kW / 15 HP Voltage 400V / 50Hz Output 0–6 bar 1620 L/min Output at 6 bar 1580 L/min Output at 8 bar 1350 L/min Output at 10 bar 1230 L/min Outlet connection (G) 1" Dimensions 1600 × 740 × 1750 mm Hodpfx Ajychbajmyjr Weight 500 kg

Condition: new, Year of construction: 2026, CORMAK LUFT 700 VSD+PM Compact Screw Compressor with Dryer – Compact Package for Demanding Applications – ENERGY SAVER SET INCLUDES: LUFT 700 VSD+PM COMPACT screw compressor with dryer Horizontal compressed air tank – 270 L Key Features of the Energy Saver Series 1. Permanent Magnet (PM) Motor Technology Most compressors in the Energy Saver series use permanent magnet motors. Compared to standard induction motors, they: Achieve efficiency levels of IE4 or even IE5 Maintain high performance even at very low speeds (standard motors lose efficiency outside their nominal range) Are smaller, lighter, and generate less heat 2. Advanced VSD Inverter Control The heart of the Energy Saver line is the frequency inverter (VSD). Adaptation to demand: The compressor does not operate on an "all-or-nothing" principle (load/unload). If your system requires only 30% capacity, the compressor reduces speed, consuming proportionally less energy. Eliminates idle running: Traditional compressors often run for several minutes after the tank is full, consuming about 25–30% of nominal power without producing air. Energy Saver models nearly eliminate this wasteful process. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz. This means no sudden current surges during startup, which: Hedpfx Ameycg I Ssyjr Saves the electrical installation in the facility Allows frequent start/stop cycles without overheating the windings 4. Real Energy Savings In practice, the Energy Saver series can reduce electricity costs by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains very stable pressure in the network (with accuracy up to 0.1 bar), which is crucial for precision devices such as laser cutters. Longer service life: No sudden pressure and temperature spikes prolong the screw stage life. Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection (G): 1/2" Dimensions: 1495 × 520 × 1340 mm Weight: 250 kg

Condition: new, Year of construction: 2026, Set including the LUFT 700 VSD+PM screw compressor, a vertical 200-liter compressed air tank with fittings, and the IZBERG N10S air dryer. The LUFT series screw compressor from the Polish brand CORMAK represents state-of-the-art pneumatic solutions combined with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high efficiency guarantee effective and trouble-free operation. Compressor Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400 V / 50 Hz Air delivery at 0–6 bar: approx. 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection (G): 1/2" Dimensions: 800 × 520 × 740 mm Weight: 95 kg IZBERG N10S Air Dryer – Technical Specifications Inlet / outlet connection (BSP): 1" Maximum working pressure: 10 bar Maximum inlet air temperature: ≤ 38°C Pressure dew point: 3°C Capacity: 1500 L/min Power: 0.58 kW Supply voltage: 230 V Dimensions (L × W × H): 380 × 600 × 625 mm Weight: 31 kg Refrigerant type and quantity: R134a, 400 g Hjdpfx Aeyguq Aemyjr 200 L Pressure Tank – Technical Specifications Weight: 80 kg Number of connections: 6 Connection sizes: 1/2", 1", 2" Overall dimensions: 166.5 × 45 cm Tank capacity: 200 L Working pressure: 11 bar Wall thickness: 4 mm Diameter: Ø 450 mm Height: 1665 mm Included Accessories 1/2" plug – 2 pcs 1/2" nipple – 1 pc 1/2" tee fitting – 1 pc 1/2" to 1/4" reducer – 1 pc 1/4" pressure gauge – 1 pc 1" to 3/4" reducer – 2 pcs 1/2" ball valve – 1 pc Important Notice! The accessory set does not include a safety valve. A suitable safety valve must be purchased and installed separately by the user.

Condition: new, Year of construction: 2026, Set including the LUFT 700 VSD+PM screw compressor and a vertical 200-liter compressed air tank with fittings. The LUFT series screw compressor from the Polish brand CORMAK represents state-of-the-art pneumatic solutions combined with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and robust design, and high efficiency guarantee reliable and trouble-free operation. Compressor Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400 V / 50 Hz Air delivery at 0–6 bar: approx. 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection (G): 1/2" Hsdpfx Ameyguirsyor Dimensions: 800 × 520 × 740 mm Weight: 100 kg 200 L Pressure Tank – Technical Specifications Weight: 80 kg Number of connections: 6 Connection sizes: 1/2", 1", 2" Overall dimensions: 166.5 × 45 cm Tank capacity: 200 L Working pressure: 11 bar Wall thickness: 4 mm Diameter: Ø 450 mm Height: 1665 mm Important Notice! The accessory set does not include a safety valve. A suitable safety valve must be purchased and installed separately by the user.

Condition: new, Year of construction: 2026, Complete Compressed Air Set: LUFT 1000 INVERTER Screw Compressor + 500L Vertical Air Receiver + IZBERG N10S Air Dryer This professional compressed air set includes: The LUFT 1000 INVERTER screw compressor (7.5 kW, direct drive, with frequency inverter), A 500-liter vertical air receiver with fittings, The IZBERG N10S refrigerated air dryer. This system is designed for industrial facilities, workshops, and all pneumatic applications that require reliable, efficient, and energy-saving compressed air solutions. The LUFT series by the Polish brand CORMAK represents the latest in pneumatic technology, combining innovation with high-quality materials and components. Low operating costs, user-friendly design, robust construction, and high performance ensure efficient and trouble-free operation even in demanding conditions. LUFT 1000 INVERTER Screw Compressor – Technical Specifications: Hsdexa Ah Ujpfx Amyjr Motor Power 7.5 kW Voltage 400V / 50Hz Output at 0–6 bar 990 L/min Output at 6 bar 950 L/min Output at 8 bar 950 L/min Output at 10 bar 930 L/min Outlet Connection (G) 1/2" Dimensions (L x W x H) 810 x 610 x 850 mm Weight 160 kg IZBERG N10S Refrigerated Air Dryer – Technical Specifications: Parameter Value Inlet/Outlet Pipe Diameter (BSP) 1" Max Operating Pressure 10 bar Max Inlet Air Temperature ≤ 38°C Dew Point Temperature 3°C Flow Capacity 1500 L/min Power Consumption 0.58 kW Power Supply Voltage 230V Dimensions (L x W x H) 380 x 600 x 625 mm Weight 31 kg Refrigerant Type & Quantity R134a, 400 g 500L Vertical Air Receiver – Technical Specifications: Parameter Value Tank Capacity 500 liters Operating Pressure 11 bar Wall Thickness 4 mm Diameter Ø 600 mm Height 2098 mm Weight 145 kg Number of Connections 6 Connection Sizes 1¼", 2", ½" Dimensions (H x D) 209.8 x 60 cm

Condition: new, Year of construction: 2026, A compact set including a Theor 20 and an N20S air-dryer. The newest solution applied in pneumatics, along with quality materials and components. Easy handling, solid chassis and high efficiency. Additional double filtration in the air-dryer. Set by default includes: Theor 20 screw compressor N20S air-dryer 500L Container Theor 20 Compact technical data Compressor Motor power 15 kW Air-dryer Motor power 0.69 kW Data Efficiency at 8 bar 2.6 m3/min Efficiency at 10 bar 2.2 m3/min Outlet G3/4" Hsdjmqlm Tjpfx Amysr The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, functionality: fully functional, Set including LUFT 700 screw compressor, N10S refrigeration air dryer. The screw compressor of the Polish brand CORMAK, the LUFT series, is the most modern solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high efficiency of the device guarantee effective and trouble-free operation. Technical parameters LUFT 700 COMPACT Compressor Engine power 5.5kW Dehumidifier Engine power 0.29kW General parameters Capacity at 0-6 bar 680 lpm Capacity at 6 bar 650L/min Capacity at 8 bar 650 lpm Capacity at 10 bar 620 lpm Outlet G3/4" Overall dimensions 1250 x 600 x 895 mm Weight 380 kg Hjdpfxsrh E Die Amyor Manufacturer: Cormak

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, total length: 3,000 mm, total width: 800 mm, total height: 1,000 mm, working height: 800 mm, input voltage: 400 V, overall weight: 800 kg, type of input current: three-phase, Manual Lisec butyl application machine LBH-25V, year 1989, fully functional, Hedpezn Np Ijfx Amyjr capacity of butyl storage cylinder 2 x 7,5 kg cartridge butyl application of spacer width 6-24 mm availabe from our stock in Hofkirchen/Austria

Year of construction: 2019, condition: excellent (used), functionality: fully functional, 120 mm cold feed vacuum rubber extruder (20D) suitable for rubber production (EPDM, SBR, NBR). Siemens motor, 0-50 r/min. Total power 155 kW. Hsdpfoxnpx Nsx Amyor

Condition: excellent (used), Year of construction: 2006, operating hours: 22,796 h, functionality: fully functional, empty load weight: 180 kg, For sale: a complete compressed air station consisting of: ATMOS E120V screw compressor MARK MDX 2400 refrigeration dryer ATMOS ALBERT E100 Vario compressed air tank Compressor technical specifications: Manufacturer: ATMOS Model: E120V Year of manufacture: 2006 Engine power: 13 kW Maximum pressure: 9 bar Capacity: 0.9–2.0 m³/min Power supply: 400 V / 50 Hz Operating hours: 22,796 hours Weight: 180 kg Hodpfxozn Apzo Amyer Dryer: MARK MDX 2400 Year of manufacture: 2006 Included: ATMOS ALBERT E100 Vario compressed air tank Complete set, ready for connection and operation Advantages: Low operating hours for a screw compressor. Complete set: compressor + dryer + tank. Ideal for workshops, production facilities, CNC centers, and service companies. The device can be inspected before purchase. Location: Wadowice, Poland

Year of construction: 2013, operating hours: 7,700 h, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 12090, This is a recycling extruder with side feeding for materials (flakes, pellets, etc.). The system is supplied with a control cabinet and a double vacuum system. The pelletizing system is missing at the end of the screw – it is not included in the scope of supply. The cylinder ends at the flange. The extruder is supplied without a screw. The frequency inverter for the main motor was replaced with a new unit 3 years ago. Installed power approx.: 474 kW Cooling water requirement approx.: 190 l/min Fresh water consumption approx.: 110 l/h Feeding system: • Diameter of the feeding screw: 200 mm • Drive for the feeding screw: 45 kW, frequency-controlled • Hopper capacity net 7 m³/250 ft³, • Gear motor 3 × 3 kW Hjdpfxoznz Ezs Amyjr • 2 sight glasses in the hopper • 2 level indicators Extruder: • Diameter of the extruder screw: 145 mm • L/D ratio: 24 • Heating power: 50 kW • Extruder drive unit 280 kW Vacuum 1: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 11 kW • Vacuum capacity: 225 m³/h • Vacuum pressure: 33 mbar Vacuum 2: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 7.5 kW • Vacuum capacity: 190 m³/h • Vacuum pressure: 33 mbar Cylinder: • Cylinder: Bimetal extruder cylinder, • Reinforcement layer 1.8–2.0 mm thick, • Hardness 63–65 HRC Installation conditions: • Voltage: 3 × 400 Volts • Permissible fluctuation max.: +5 % – 5 % • Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 % • Protective measure: Multiple grounding • Ambient temperature: min. 15 °C, max. 35 °C • Humidity max.: 90 % • Altitude of the installation site: 0 – 1000 m The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is without packaging.

Condition: used, operating hours: 12,100 h, functionality: fully functional, machine/vehicle number: 010460, We are offering a high-performance industrial compressor from Atlas Copco for sale. The unit is used, has been regularly maintained by qualified personnel, and is immediately ready for operation. Technical specifications: Hjdpfx Amjzdqz Dsyor Type: GA37 VSD+ FF (VSD+ technology for maximum energy efficiency) Operating hours: 12,100 hours Condition: Used, very well maintained, and immediately ready for operation. The compressor can be inspected and tested on-site in Kiel after prior arrangement.

Condition: excellent (used), BOGE S15 screw compressor, serviced Hjdpoyfpf Eefx Amyer Technical data: Capacity: 1.45 m3/min (1450 L/min); Engine power: 11 kW; Maximum pressure: 10 bar; Year: 2003 Operating hours: 11320 h; Net price: 6200 PLN Gross price: 7626 PLN

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: ITRO377736, power: 4 kW (5.44 HP), operating pressure: 11 bar, type of cooling: air, Equipment: type plate available, The ABAC B4900 /LN/ 270 FT4 compressor is a robust and high-performance model, ideal for various demanding industrial applications. This oil-lubricated compressor is capable of producing a maximum pressure of 11 bar, making it suitable for many uses requiring sustained power. With a motor power of 4 kW, it guarantees energy efficiency while delivering good compression performance. This model is designed for long-term use and is perfect for workshops or production sites where a constant and reliable supply of compressed air is essential. Thanks to its robust structure, the B4900 can withstand intensive use while maintaining optimal performance. It is a durable and cost-effective solution for those seeking both power and reliability in industrial equipment. The ABAC B4900 compressor is an excellent option for those looking for a quality compressor, both for professional use and for more specific tasks. Its used condition does not affect its capabilities, making it a wise investment for companies looking to optimize their operations without compromising performance. Hodszlxxmjpfx Amyjr

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: VD004489, power: 45 kW (61.18 HP), operating pressure: 10 bar, type of cooling: air, Equipment: compressed air system, compressor, type plate available, The Hertz Frecon Plus 45 compressor is a high-performance industrial unit designed to meet demanding compressed air requirements. This used model offers a power output of 45 kW and operates at a maximum pressure of 10 bar, making it ideal for various industrial environments requiring a reliable compressed air supply. Hodpfx Amozlxq Aoysr This oil-lubricated compressor is known for its robustness and efficiency, ensuring a long service life and minimal maintenance. The Frecon Plus series from Hertz was designed to optimize energy performance while reducing operating costs. This makes it not only economical in the long term but also environmentally friendly thanks to its energy efficiency. Overall, the Hertz Frecon Plus 45 is a reliable choice for those seeking a used compressor capable of delivering consistent power and efficiency. Its robust design and operational capabilities make it a valuable asset for any industrial facility requiring a high-performance compressed air solution.

Condition: new, “Partially unpacked for photography – unused item from warehouse clearance.” Quantity: 15 pieces available Hjdpfxezluame Amyer Ball screw drive Dm50, stroke 400 PITCH 30MM 13:79 675/11 00000 STEINMEYER

Year of construction: 2006, condition: used, No. 10036 Screw conveyor with feed hopper Van Beek KS250 Used, year of construction 2006 According to our customer / the previous owner, the machine is fully functional and can be viewed on site Stationary screw conveyor with feed hopper / dosing hopper / storage hopper for the controlled discharge and onward conveying of lightweight bulk materials and piece goods Hopper volume approx. 2 m3 Conveying capacity approx. 2 m3/h Screw diameter approx. 248 mm Screw pitch approx. 250 mm Screw speed approx. 10 rpm Labyrinth seal Motor power 3 kW Protection rating IP54 Chain drive Transport dimensions approx. 2800 x 1500 x 2125 mm LWH Weight approx. 1500 kg Sale on behalf of customer, ex location near 69123 Heidelberg, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Hsdpfxezltwqs Amyor Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Condition: new, Year of construction: 2025, operating hours: 7 h, Exhibition unit – immediately available: Kaeser SK 22 T - 10 bar rotary screw compressor incl. integrated refrigeration dryer incl. SIGMA CONTROL 2 controller Year of manufacture: 2025 Operating hours: 7 hours Warranty: 12 months Pressure: 10 bar Hjdpfxjznmp Ss Amyer Rated power: 11 kW Free Air Delivery (FAD): 1.68 m³/min Noise level: 66 dB(A) Compressed air outlet: 1" Dimensions (L x W x H): 750 x 1240 x 1260 mm Weight: 387 kg Convenient leasing options via our partner bank are available for new machines. Feel free to visit our retail store. We always stock a wide selection of new and used compressors!

Year of construction: 2024, condition: new, noris- Extruder MINI ESE 20/25 D Technical data Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 20-200 min -1 Screw axial pressure [bar] 300 Continuous load 350 maximum Drive Three-phase drive with frequency converter Hodpfx Ashx Elfomysr Drive power [kW] max. 2.5 Reduction gear with integrated axial bearing Weight [kg] approx. 160 Dimensions [Lx Wx H] [mm] approx. 1050 x 600x 1590 *) Electrical connection values 3 / N / PE Supply voltage [V] 400 at 50 Hz Control voltage [V] 230 Temperature control electrical resistance heating bands in mica design. Max. processing temperature [°C] 300 Switch cabinet and control panel The electrical installation of the extruder is located in the machine base. The base contains all the necessary switching, control and display devices. The feed zone is water-cooled, the water connection is provided by the customer, a cooling unit for cooling the water is not included in the offer. Extruder tools are not part of the offer

Condition: excellent (used), functionality: fully functional, ALUP SCK15-10 screw compressor Technical specifications: capacity: 1510 m3/min; engine: 11 kW; maximum pressure: 10 bar; Hedjzmw A Hepfx Amyjr operating hours: 12437 h; compressor is fully functional; net price: 5200 PLN gross price: 6396 PLN Video available below.

Condition: excellent (used), functionality: fully functional, KAESER SK26 screw compressor, serviced machine Technical data: capacity: 1.62 m3/min (1620/min); engine power: 15 kW; pressure: 13 bar net price: 5500 gross price: 6765 Compressor in perfect working order. We provide service support. Link to video below. Hodjzmwqdopfx Amysr

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, ALUP ALLEGRO 30 10 screw compressor with frequency converter, recently serviced. Technical specifications: capacity: 4.92 m3/min; engine: 30 kW; Hedpezmuwbofx Amysr maximum pressure: 9.7 bar; year: 2010; operating hours: 12896 h; compressor in perfect working order, with warranty. net price: 14700 PLN gross price: 18081 PLN Link to video below.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Airpress GENESIS 15 500 compressor. Machine with air dryer and a 500L tank, recently serviced. Technical data: Capacity: 1.95 m3/min (1950/min) Engine power: 15 kW Pressure: 10 bar Operating hours: 22175 h Year: 2013 Net price: 12,700 Gross price: 15,621 Compressor in fully working condition. We provide service and maintenance. Hjdpezmua Aefx Amyjr Video available below.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, ATLAS COPCO GA18VSDFF screw compressor, machine with frequency inverter and air dryer, after service. Technical data: capacity: 3.24 m3/min; engine power: 18.5 kW; maximum pressure: 12.75 bar; year: 2003; operating hours: 11137 h!!! Hodpfxjzmt Nvj Amyor Price: 16200 net 19926 gross Compressor in fully working order, ready for operation, with warranty. We provide service. Link to video below.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, ATLAS COPCO GA22VSDFF screw compressor, machine with inverter and air dryer, after service. Technical data: capacity: 3840 m3/min; engine power: 22 kW; maximum pressure: 12.80 bar; year: 2007 operating hours: 11469 Price: 19800 net Hodpfezmt Huox Amyjr Price: 24354 gross Compressor in full working order, ready for operation, warranty provided. We also provide service. Link to video below.