Used Extraction System for sale (39,144)

Condition: used, Year of construction: 2023, functionality: fully functional, Complete extraction system for the production line for log cutting LSH 350/4500. Commissioned in 01/2023. The equipment has no manufacturer, it consists of individual components. Configured based on calculations, documentation available. Kodpfoxa Excox Ap Aolw

Year of construction: 2022, operating hours: 427 h, condition: like new (used), functionality: fully functional, The extraction unit is from 2022 and has only 427 operating hours. It is therefore immediately ready for use and in excellent condition—see pictures. The price is gross (3,500 EUR net); you will receive an invoice with VAT shown separately. The mobile LOCTITE extraction system LAS 250 is a key component for health and environmental protection at the workplace. Molecules released by adhesives in their liquid phase are captured directly at the workstation, cleaned by the extraction unit via a special activated carbon filter system, and then the purified air is returned to the workspace. This reliably prevents air pollution in the work area and ensures compliance with workplace air quality regulations. Thanks to its low weight and mobility, the LOCTITE extraction system can be easily transported to different workstations. Features: - Special fan with high pressure reserve - Adjustable flow volume control - Suitable for up to 4 workstations - Filter combination with special activated carbon - Filter cartridges are recycled upon return Kodpfxexy Spzo Ap Aolw - Built-in operating hour counter to monitor filter element life

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, overall weight: 12,000 kg, The Modesta extraction unit is in good condition, still installed and can be seen in operation. There are 2 automatic diverter valves present, allowing the choice to discharge into the bunker/silo or into 2 containers. Additionally, a blow-through filter is available for sale, which has recently been fitted with a new control system. Kodpfxsx Ezlfj Ap Aolw

Condition: new, Year of construction: 2025, Dedusting system with pre-chamber separator specially developed for aggressive sandblasting dusts, complete essentially consisting of: Kedpsrt H Izefx Ap Aelw a) 1 cartridge dry filter, type PF 1.16.B250 15,000m³ (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas compartment with filter cartridges and clean gas compartment with filter cleaning by means of compressed air, each with separate maintenance doors that are easy to open. Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the 16 filter cartridges - cleaning. Technical data, approx. Type PF 1.16.B250 W x D x H 1.6 x 1.9 x 4.2m Air flow rate 15000 cbm/h Filter cartridges 16x 15,6m² Filter area 249.6 m² Filter medium PE fiber fleece Residual dust content 99.9%

Condition: excellent (used), Field of application: • Single and multi-station extraction in industry and trade • Free-flowing and dry dusts, health-hazardous dusts, dry chips Special features: • Filter cleaning method: • Brush cleaning (manual) • Cleanable permanent filter cartridge (dust class M) • Special versions with various filter cartridges, exhaust ports, special voltages, custom paint finishes, pre-separators, and external control via volt-free contact are possible Your advantages at a glance • High suction power due to side channel blower technology • Low operating costs • Quiet operation suitable for multi-shift use • Patented tiltable filter housing for easy disposal of collected material | Price including packaging (wooden crate) | plus shipping costs Kledpfx Apow Avl Ue Aow

Condition: new, The clean air dust extractors of the R160 series are used in trade and industry. They can be connected to individual machines, machining centers or via pipelines to multiple extraction points. The mobile clean air dust extractors impress with their high extraction performance while requiring little space. Advantages and features: - Version with bag filters can also be shaken off during operation. - Long service life thanks to bag filters - even with fine dust such as grinding dust - Direct connection to briquette press possible - Machine meets all common requirements (Category C, Bia certificate, residual dust content H3 < 0.1mg/m³) and can therefore be used in businesses without hesitation - High quality: Made in Germany Technical data: nominal volume flow: 1850 m³/h extruction nozzle: 160 mm Klsdpfx Apovrv Ezj Ajw low pressure V/min: 2550 PA motor rated-power: 2,2 kW chip collection volume: 280 l max. noise level: 73 dB(A) weight: 185 kg filter area: 8,25 m² of surface treated polyester needled felt, category C, BIA certificate, electroconductiv, washable- H3 < 0,1mg/m³,

Condition: new, Year of construction: 2025, Dedusting system with pre-chamber separator specially developed for aggressive sandblasting dusts, complete essentially consisting of: a) 1 cartridge dry filter, type PF 1.16.B250 15,000m³ (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas compartment with filter cartridges and clean gas compartment with filter cleaning by means of compressed air, each with separate maintenance doors that are easy to open. Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the 16 filter cartridges - cleaning. Technical data, approx. Type PF 1.16.B250 W x D x H 1.6 x 1.9 x 4.2m Air flow rate 15000 cbm/h Filter cartridges 16x 15,6m² Kledpfx Apsw Ivrwe Aow Filter area 249.6 m² Filter medium PE fiber fleece Residual dust content 99.9%

Year of construction: 2007, condition: good (used), Chemagen chemagic Magnetic Separation Module I The chemagic Magnetic Separation Module I (chemagic MSM I) automatically isolates nucleic acids within one hour. Viral RNA from 96 nasal swabs can be isolated simultaneously. The Chemagen MSM-1 is an automated system for high-throughput nucleic acid (DNA/RNA) isolation. It utilizes patented Magnetic Bead Technology, in which magnetizable metal rods are immersed in the process solutions to efficiently collect and resuspend the bound particles. Technical Features & Capacity Throughput: The system has a modular design and can process 12, 24, or 96 samples simultaneously, depending on the rod head used. Sample Volume: It offers high flexibility for volumes from 10 µl to 10 ml. Processing Time: 96 samples (small volumes): approx. 15–60 min. 24 samples (medium volumes): approx. 35–60 min. 12 samples (large volumes): approx. 45–60 min. Technology: Particle resuspension is achieved by rotating the metal rods at up to 2,000 rpm, enabling high yield and purity without cross-contamination. System Components & Extensions Automation: The MSM-1 can be integrated into standard liquid handling units and often features a 6-axis industrial robot for fully automated sample tracking. Software: The system is controlled by chemagic QA software, which is LIMS-compatible. Applications The device is primarily used in research and diagnostics, including: Biobanking and human genetics HLA typing Detection of viruses and bacteria Extraction from various materials such as whole blood, saliva, serum, or plasma System Components Actuators: High-precision linear axes for vertical movement and a rotary axis for mixing Electromagnet: Central unit for controlling the magnetic attraction to the metal rods Interfaces: Integrated PC with screen, keyboard, and barcode scanner for sample tracking Software: chemagic QA software (LIMS-compatible, logging, user management) Special Features Cross-contamination protection: The use of disposable protective sleeves (tip combs) for the metal rods prevents contact between samples. Automation: Can be combined with the chemagic dispenser for automated buffer filling or integrated into liquid handling robots (e.g., Hamilton, Tecan). Probe heads: 96 Sample volume: 10 - 400 μL Number of samples: 1 to 96 samples TFT monitor, keyboard, and mouse Year of manufacture: 2007 Dimensions & Setup Basic machine (W/D/H): approx. 600 x 640 x 950 mm. Klsdpfxsyk Uu Nj Ap Aow Carrier axis (W/D/H): 1940 x 170 x 200 mm (with full expansion and rail system). Total space requirement: A fully configured system can require up to 2000 x 740 x 800 mm (L/W/H). Financing through our bank is also available. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 2010, functionality: fully functional, power: 90 kW (122.37 HP), volume flow: 39,150 m³/h, overall weight: 2,720 kg, nominal flow rate: 39,150 m³/h, negative pressure: 6,250 Pa, nominal power: 90 kW (122.37 HP), rotational speed (max.): 1,325 rpm, Various fans from Polytechnik are for sale: 1. A450-45.0-G5 20kW 2. A450-45.0-T1 20kW Kodpfx Apou Udibo Aelw 3. A450-45.0-T2 20kW 4. A450-45.0-G7 22kW 5. A500-45.0-G3 24kW 6. A560-45.0-G2 30kW 7. A710-45.0-G4 60kW 8. A800-45.0-G6 80kW

Condition: good (used), Delta New Poluclean P30 dust extraction system Delta New Poluclean P30 Dust extraction system 400 V 5,5 kW 3500 m³/h 95 liters weight: 361 kg Dimensions: HxWxD = 300 x 100 x 97 cm More extraction units in other sizes - new and used - you will find in our store! International shipping costs on request! Kledpfoihfwpox Ap Ajw

Condition: used, Dust cyclone with rotary valve, dust cyclone 14,400 m³/h,Cyclone system, used machine Year: 2013 Dust Cyclone: HLZ-J 1600 Airflow rate: 14,000 Bm³/h Inlet (suction side): 400 mm Height: 5,853 mm Diameter: 1,695 mm Centrifugal Fan: Ventilatorenfabrik Oelde GmbH Type: HRV 56N-400/M GL360 Kledsx U Amiepfx Ap Asw Airflow rate: 14,400 m³/h Rated power: 22 kW Rotary Valve: Ventilatorenfabrik Oelde GmbH Type: MS 050-390 A Capacity per revolution: 58 liters Rotor with 10 fixed rotor blades (cells)

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, total height: 2,000 mm, total width: 990 mm, total length: 1,800 mm, input voltage: 400 V, overall weight: 450 kg, warranty duration: 12 months, space requirement height: 2,000 mm, space requirement width: 1,000 mm, space requirement length: 2,000 mm, power: 5.5 kW (7.48 HP), filter area: 120 m², intake manifold diameter: 300 mm, noise level: 70 dB, suction capacity: 6,000 m³/h, volume flow: 6,500 m³/h, Equipment: documentation/manual, 1. Product Description The Airtech extraction unit is a horizontally installable, integrated dust separation system (cartridge filter unit) equipped with multiple filter cartridges. It is designed for applications with small to medium airflow volumes and offers high efficiency in particle separation. Key Features: - Multiple filter cartridges in a horizontal configuration for a compact and maintenance-friendly design. - Particularly suitable for industrial applications that require constant and reliable dust extraction. Your Benefits: - High Filtration Efficiency & Air Quality: Thanks to multi-stage filtration, fine dust particles are effectively retained, contributing to clean air and extending the service life of your production equipment. - Compact Design: The horizontal layout saves space and facilitates integration into existing systems. - Low Maintenance: Easy access to the filter cartridges allows for efficient inspection, cleaning, or replacement. Powerful: The 5.5 kW blower ensures strong suction power and stable extraction performance even in challenging applications. Kedpfxoxxvpio Ap Aolw Delivery ex works / from stock Installation and Commissioning (optional): Available upon request by our trained technical team. Spare parts (filter cartridges) as well as maintenance contracts can be offered separately to maximize your system’s uptime.

Condition: new, Year of construction: 2025, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, type of input current: three-phase, volume flow: 6,500 m³/h, intake manifold diameter: 300 mm, filter area: 120 m², noise level: 70 dB, total height: 2,400 mm, total length: 1,900 mm, total width: 990 mm, overall weight: 580 kg, space requirement height: 2,500 mm, space requirement length: 2,000 mm, space requirement width: 1,000 mm, warranty duration: 12 months, Equipment: documentation/manual, 1. Product Description The Airtech extraction unit is a horizontally mountable, integrated dust separation system (cartridge filter unit) equipped with multiple filter cartridges. It is designed for applications with small to medium airflow volumes and delivers high efficiency in particle separation. Main features: - Multiple filter cartridges in a horizontal design for a compact, maintenance-friendly construction. - Particularly suitable for industrial applications where consistent and reliable dust extraction is required. Ksdpfexxvkmox Ap Aolw Your Benefits - High filtration efficiency & air quality: Thanks to multi-stage filtration, fine dust particles are effectively captured, contributing to clean air and prolonging the lifespan of your production equipment. - Compact design: The horizontal configuration saves space and facilitates integration into existing systems. - Low maintenance: Easy access to the filter cartridges allows for efficient inspection, cleaning, or replacement. Powerful: The 7.5 kW blower ensures strong suction and stable extraction performance, even for demanding applications. Delivery ex works / from stock Installation and commissioning (optional): Available on request, performed by our trained technical team. Spare parts (filter cartridges) and maintenance contracts are available separately to maximize your system’s uptime.

Condition: excellent (used), Year of construction: 2013, Mode of operation: continuous operation with intermittent pauses Type of current: three-phase AC Frequency [Hz]: 50 Power consumption [kW]: 4 Supply voltage [V]: 3 × 400 V Number of filter bags / filter cartridges: 18 / Plitex Filter material: polyester felt 973010, dust class M, d = 160 × 1503 mm Filter area [m²]: 73.8 (4.1 m² per filter cartridge) Weight [kg]: approx. 700 Filter cleaning: compressed-air pulse cleaning Compressed air connection: standard NW7 quick coupling  – compressed air must be dry and oil-free  – Maximum pressure: 8 bar, Nominal pressure: 6 bar Compressed air consumption: approx. 360 normal litres per cleaning cycle Kledpjxup Auofx Ap Ajw Ambient temperature [°C]: 5–40 Maximum sound pressure level [dB(A)]: less than 70 Conveyed medium: air with solid particles Minimum operating temperature [°C]: 5 Residual dust content [mg/m³]: < 0.2 Maximum operating temperature [°C]: 45 Type of solids: salt-containing dust up to 2 mm particle size Maximum Kst value [bar·m/s]: 200

Condition: new, table length 2000 mm table width 1200 mm table height 200 mm bore 28 mm weight 843 kg Specifications - High-quality S355J2+N steel + plasma nitriding Kjdpfx Ajznngrop Aelw - Material thickness approx. 24.5–27 mm - Hole diameter 28 mm - Holes in 100×100 mm grid pattern - Rounded corners, edges and holes - Side panel height 200 mm - Hole spacing on side panel: 50 mm - Includes scale markings on the surface - Construction reinforced with ribs - Grid lines enable precise set-ups - Special equipment for welding tables is available on request.

Condition: new, table length 1500 mm table width 1000 mm table height 200 mm Kljdpfx Ajznngfsp Asw bore 28 mm weight 554 kg

Condition: used, Year of construction: 2003, feeder rollers, transfer belts for 6 meters, retractable forks, lift tables with rubber-coated parcel drive chains, outfeed chains Kodpfxjycxtys Ap Aolw

Condition: good (used), axle configuration: 3 axles, first registration: 03/2021, loading space length: 13,600 mm, loading space width: 2,460 mm, loading space height: 2,830 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,050 mm, suspension: air, tire size: 385/55R22,5, color: other, Year of construction: 2021, Equipment: ABS, = Additional Options and Accessories = - EBS = Notes = Number of axles: 3, Tare weight: 8070 kg, Gross vehicle weight: 43000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air suspension, ABS, EBS, Body construction year: 2021, Axle type: SAF, MEGA DOUBLE DECK // HARD WOOD FLOOR // SAF DISC BRAKES / LIFTING AXLE = Further Information = General Information Cab: Day cab License plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Transmission: Manual gearbox Axle Configuration Tire size: 385/55R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lifting axle; Tire tread depth left: 6 mm; Tire tread depth right: 4 mm Axle 2: Tire tread depth left: 12 mm; Tire tread depth right: 11 mm Axle 3: Tire tread depth left: 4 mm; Tire tread depth right: 4 mm Klodpoy Irnvsfx Ap Aew Weights Tare weight: 8,070 kg Payload: 34,930 kg GVW: 43,000 kg Environment Emission class: Euro 0 Condition Technical condition: good Optical condition: good Damage: none Financial Information Leasing price: 335 € per month (default, 60 months); Ask for more information and conditions = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of construction and price ranges. Why buy from Kleyn Trucks? It's simple! • Large and rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: used, axle configuration: 3 axles, first registration: 07/2013, loading space length: 10,250 mm, loading space width: 2,450 mm, total length: 11,700 mm, total height: 1,600 mm, color: other, Year of construction: 2013, = Additional options and accessories = - Steering Axle = More information = Axle configuration Rear axle 1: Lift axle Rear axle 2: Steering Weights Empty weight: 8.000 kg Carrying capacity: 34.000 kg GVW: 42.000 kg Ksdpfx Ajyzt Sisp Ajlw Functional Height of cargo floor: 160 cm Condition General condition: average Technical condition: average Visual appearance: average Identification Registration number: QAQU503 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 06/2018, loading space length: 13,390 mm, loading space width: 2,490 mm, loading space height: 2,590 mm, total length: 14,040 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 8,910 mm, color: white, Year of construction: 2018, Equipment: tail-lift, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: SAF Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 3: Max. axle load: 9000 kg; Steering; Tyre profile left: 70%; Tyre profile right: 70% Weights Empty weight: 10.040 kg Carrying capacity: 31.960 kg GVW: 42.000 kg Functional Tail lift: Dhollandia DHSMT.30, slider lift, 2500 kg Make of bodywork: VeDeCar Thermo King SLXi Spectrum Cooling engine: diesel and electric (4396 operating hours diesel; 5 electric) Wall thickness: 50 mm Klsdjzm Nvrjpfx Ap Aew Maintenance, history and condition Number of owners: 3 Technical condition: good Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: excellent (used), axle configuration: 3 axles, first registration: 08/2026, loading space length: 13,700 mm, loading space width: 2,500 mm, loading space height: 2,780 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55R22,5, wheelbase: 8,790 mm, color: other, Year of construction: 2026, Equipment: ABS, tail-lift, = Additional Options and Accessories = - EBS - Tail lift = Notes = Number of axles: 3, Payload: 30950 kg, Tare weight: 8050 kg, Gross weight: 39000 kg, Type of chassis: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air, ABS, EBS, Body construction year: 2026, Axle type: SAF, Tail lift, Tail lift design: under-folding tail lift, Tail lift load capacity: 2000 kg, Tail lift manufacturer: Dhollandia, Tail lift material: Steel and aluminum, Tail lift size: 240x170, Battery for ramp, TAILLIFT 2,000 KG 3x 9 TON SAF AXLES DISC BRAKES = Additional Information = General Information Cab: Day cab Registration number: OX-74-GS Powertrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle Configuration Tire size: 385/55R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Tire tread depth left: 14 mm; Tire tread depth right: 14 mm Axle 2: Tire tread depth left: 14 mm; Tire tread depth right: 14 mm Axle 3: Lift axle; Tire tread depth left: 14 mm; Tire tread depth right: 14 mm Weights Tare weight: 8,050 kg Payload: 30,950 kg GVW: 39,000 kg Functional Tail lift: Dhollandia, under-run, 2000 kg Environmental Emission class: Euro 0 Condition Technical condition: very good Optical condition: very good Damage: none = Company Information = Kodpfx Aszk Un Uop Ajlw Kleyn Trucks is one of the world's largest independent used vehicle dealerships. Here, you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various production years and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • Good price • Correct business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: repair required (used), Year of construction: 1998, Max. tool size: 1,600 x 1,300 x 1,700 mm Max. table load: 17 tons Clamping force: 1500 kN Opening force: 750 kN Kodpezkigrefx Ap Aelw Drive power: 25 kW Machine weight: approx. 30 tons

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 09/2017, loading space length: 135,000 mm, loading space width: 24,800 mm, loading space height: 27,000 mm, total length: 13,820 mm, total width: 2,550 mm, total height: 4,000 mm, wheelbase: 8,910 mm, color: white, Year of construction: 2017, Equipment: tail-lift, = Additional options and accessories = - Air suspension = Further information = Rear axle 1: Max. axle load: 9,000 kg Rear axle 2: Max. axle load: 9,000 kg; Steerable Unladen weight: 8,420 kg Kledpfx Apjy Ipw Ij Aew Payload: 21,580 kg GVW: 30,000 kg Tail lift: D'HOLLANDIA DHLM.30, rear door, 2,000 kg Technical condition: good Visual condition: good Registration number: OP-65-YR

Condition: used, Year of construction: 2005, functionality: fully functional, total width: 6,300 mm, total height: 2,100 mm, total length: 20,000 mm, working width: 2,600 mm, input voltage: 380 V, type of input current: three-phase, roll width: 2,600 mm, roller length: 7,600 mm, We offer this ready-to-use ICO SYSTEM reactive PUR hot melt press, model ICO SYSTEM, manufactured in 2005. ICO SYSTEM reactive PU hot melt press line – 2,600 × 7,000 mm For sale: complete industrial reactive PU hot melt press line for single-sided bonding of large sheet materials. This robust production line from ICO SYSTEM International Coating GmbH has been successfully used for years by TABB Interior Systems BV for the production of high-quality laminated sheet materials. The installation is in excellent technical condition, is fully operational, and can be put into production immediately. Key features: Reactive PUR hot melt bonding Maximum panel size: 2,600 × 7,000 mm Suitable for single-sided bonding Year of manufacture: approx. 2005 Fully functional and well-maintained PLC control with touchscreen Automatic vacuum portal for precise panel positioning Throughfeed system for controlled curing and constant pressing force Roller conveyors and transport tables included Suitable for: The installation is suitable for bonding a variety of flat sheet materials, including: plywood MDF HDF particleboard HPL composite panels aluminum and steel sheets various other industrial sheet materials. Production process The line is designed for an efficient and reproducible production process: positioning of the bottom sheet application of reactive PUR hot melt automatic placement of the top sheet using a vacuum portal passage through the heated press controlled curing and output of the finished product. Thanks to the automatic handling, large panels are produced quickly, accurately, and with consistent adhesive quality. Scope of supply The complete installation includes, among other things: ICO SYSTEM heated throughfeed system automatic vacuum portal with suction cups conveyor belts and roller conveyors control cabinet with PLC/HMI complete steel structure and handling. Condition The machine is fully operational, is still in use in production, and is available only due to a change in the production process. Inspection while running is possible by appointment. Kodpszlh Ausfx Ap Aslw Interested? Please contact us for additional information, technical specifications, a demonstration, or an inspection. This high-quality industrial press line is ideally suited for companies that want to efficiently bond large sheet materials with a high-quality PUR hot melt bond.

Year of construction: 2002, condition: good (used), functionality: fully functional, Full automatic pack infeed to Moulder Klsdpfozlbibsx Ap Aow Speed up to 120 M/Min Complete with manuals Automatic board turner. single board feeding system Min/Max length 820mm/5400mm