Stationary extraction system

Hurrican HR RF 300

Condition: new, Year of construction: 2026, For professional and precise glue supply in dowel holes and back side grooves. Short introduction: • Always the same and right glue amount • No afterwards cleaning of the workpieces of too much glue is necessary • Easiest and minimal cleaning (1x week) of the gluing system (through cleaning program) • Glue cost savings Tededxz Tpopfx Acnjb • Ergonomic and light glue gun compared to squeezy glue bottles • Faster and more precise working compared to squeezy glue bottles

Condition: used, Year of construction: 2003, Central extraction system Adlolph & Co. (JKF) with screw conveyor and rotary valve. Manufacturer: Adolph & Co. (JKF) Type: AC 2 LK Year of manufacture: 2003 Suitable for dust and chips Volume flow: approx. 16,000 m³/h With air recirculation 1 piece Sluice filter, galvanized - Year of manufacture 2003 - AC 2 LK - Filter area: approx. 150m² - Cleaning of the filters via a vibration motor - Filter housing made of galvanized sheet steel - 3 inspection doors - Pressure relief surfaces - Exhaust air connection according to local requirements - Filter base frame in welded steel construction, galvanized. - Including dry extinguishing line, C connection 3 pieces Extraction fans: 1 piece Manufacturer: JKF Type: JK - 40K L Motor power: 11.0 kW Speed: 2,400 rpm Air flow: ~ 10,800 m³/h 1 piece Manufacturer: JKF Type: JK - 30K L Motor power: 7.5 kW Speed: 2,900 rpm Air flow: ~ 7,500 m³/h 1 piece Manufacturer: JKF Type: JK - 30K L Motor power: 7.5 kW Tsdpjywd I Tofx Acnjb Speed: 2,900 rpm Air flow: ~ 7,500 m³/h1 piece Pipe components Air return - incl. galvanized ducts - Must be supplemented for a new location 1 piece Control cabinet With PLC Siemens control, in dustproof sheet steel standard housing, designed as a wall cabinet.Designed for: Installation dimensions: - Length: 5,250 mm - Width: 1,300 mm - Height: 4,650 mm (may vary depending on equipment) Electrical connection value: - Approx. varies depending on number of fans - 400 V/50 Hz - Control voltage 230 V AC/24 V DC - Location, not in stock

Condition: new, Year of construction: 2026, functionality: fully functional, Gannomat Selekta Dowel Insertion Machine Year of manufacture: 2026 Dowel insertion machine with a pistol grip for simultaneous gluing and dowel insertion. Designed for professional and efficient dowel processing in furniture and frame construction. Tedpfx Acjvxgm Neneb • Consistent dowel insertion depth • Always consistent and correct amount of glue • Due to the correct amount of glue, no subsequent cleaning of the workpieces is necessary • Easiest cleaning of the gluing system via EasyClean, the automatic cleaning program • Automatic ejection of dowels with incorrect diameter and length by the Auto-DL selector • Dowels are not driven in based on force; the dowel insertion depth is set independently of the bore hole depth • Recoil-free, extremely lightweight, and comfortable glue-dowel insertion pistol • Significant time savings compared to using a glue bottle and hammer

Condition: new, functionality: fully functional, machine/vehicle number: SBT 2057, Year of construction: 2018, 2-deck screening machine 6000 x 1600 x 2000 mm. This machine was purchased by us in 2018 but has never been used. Current screen deck configuration: upper deck equipped with PU screen with 60 mm aperture, lower deck is a flip-flop screen for separation down to 4 mm. Delivery is complete with drive line, spring supports, and springs. Tedpfxjulf Dps Acneb

Condition: used, Type: V1400x4250 D Screen area: 1,400 x 4,250 mm heavy-duty design PUR screens in the upper deck: 40x40 mm Tsdpfx Acjtpgu Honjb

Condition: excellent (used), Roller conveyors for the furniture industry, WTT Fördertechnik GmbH, Type 121 750 units of complete roller conveyors, each 3 m long. Price per unit: 1 unit = 75 EUR (total length 3 m) Prices on request for larger quantities. Detailed description: Roller conveyor length L = 3000 mm Installation length IL = 500 mm Load roller spacing T = 200 mm Roller conveyor height H = 280 mm +/- 25 mm adjustable Number of feet FA = 1 unit per running meter Consisting of: - 2 units of side frames (side rails), each 3000 mm long, made of profile 20/80/40/3 mm, with a grid dimension of 25 mm, holes suitable for a 12 mm diameter axle, powder-coated in RAL 6011 green. Weight per side rail: 8.15 kg - 15 units of insertable load rollers Series 4.5.80.1.12.1.5.00 Steel tube - 80 x 2.0 mm wall thickness, Axle - 12 mm spring axle, Bearing – steel insert with reinforced, pressed special ball bearings. Surface of the load rollers is steel, unpolished. Installation length IL = 500 mm Weight per roller: 2.4 kg - 3 units of screw-on bridge support feet in a sturdy welded construction made of special profile with a cross brace, height adjustable by +/- 25 mm via a threaded spindle M16 with a screw slot. With floor mounting plates and dowel hole. Powder-coated in RAL 3000 red. Weight per foot: 2.5 kg. Todpewwmitefx Acnjb (Subject to changes and errors in the technical data as well as prior sale)

Condition: good (used), Year of construction: 2004, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, intake manifold diameter: 350 mm, year of last overhaul: 2020, Equipment: CE marking, documentation/manual, Schuko Intermediate Filter System “Eco Var 04” Professional dust extraction system Schuko Eco-Var 04 (year of manufacture 2004) – complete system including piping, control system, and emission permit. For sale is a powerful and fully functional industrial dust extraction system from the premium manufacturer Schuko, type Eco Var 04 (year of manufacture 2004). The system is ideally suited for woodworking companies for efficient extraction of chips and dust and is offered including an extensive pipe and control system infrastructure. Technical data & equipment • Manufacturer: Schuko • Model series: Eco Var 04 (intermediate filter system) • Year of manufacture: 2004 • Drive power: approx. 11 kW (powerful, efficient fan) Tjdpfxezddwge Acneb • Discharge: Rotary valve airlock with 5 sealing lips (ensures safe, pressure-loss-free material discharge into containers, silos, or briquetting presses) Extensive accessories & infrastructure (included) • Pneumatic valves: approx. 20 units for automatic shut-off of individual machine connections. • Pipe & hose system: approx. 80 meters of robust extraction pipe including the corresponding flexible hoses. • Pneumatic infrastructure: compressed air connections including all associated pneumatic hoses for valve control. Product advantages & condition • Complete package: No tedious searching for individual parts – from the filter system to the piping and the complete control and pneumatic system, everything is available for workshop installation. • Robust industrial quality: The Eco-Var series from Schuko is known for its durability, high filter area, and reliability in daily workshop use. • Energy-efficient: Thanks to the approx. 20 pneumatic valves, the extraction performance is only provided where work is currently being carried out, which saves a lot of energy. Note for buyers: The system is in a well-maintained and fully functional condition, appropriate for its age. Inspection can be arranged.

Condition: excellent (used), Extraction installation Termoaspira 70M Tedpfeyh T Sxox Acneb Power 7.5 kW Pneumatic filter bag cleaning system Air return to the hall Auger for chip removal Rotary airlock valve

Condition: excellent (used), Fan motor 15 kW Inlet 35 cm, outlet 35 cm Fan motor 3 kW, inlet 20 cm, outlet 20 cm Tjdpfjx N Scvex Acnsb Height 520 cm Width 200 cm Length 240 cm Hot air return pipe Length 570 cm, width 55 cm, outlet 80 cm 3 pipes with magnets

Condition: ready for operation (used), * Brand: Hein Lehmann * Surface: 6300 x 1500mm - 1 Decks * Driving: 18,5 kW E-Motor Tedpoywm Trjfx Acnob