Used Extracted Wall for sale (9,829)

Condition: used, Year of construction: 2001, Baffle width: 4000 mm. Baffle height: 1000 mm. External dimensions: 4600 x 1500 mm. 2 x 1.5 kW motors. Total nominal flow rate: 7000 m³/h. Right and left exhaust nozzles with 300 mm diameter. Cpodpfsvvizkex Aa Eew Storage location: Garbsen

Condition: used, Welding fume extraction unit for wall mounting, KEMPER extraction device Type 85400 Serial number: 279092 Year of manufacture: 1997 Volume flow: 1700 m3/h Static pressure: 2000 Pa Extraction connection: Ø 250 mm Motor power: 1.5 kW Power supply: 400 Volts, 50 Hz - Radial fan - Designed for a mechanical air filter with approx. 99% separation efficiency - Main filter defective (surcharge for new main filter: EUR 195 net) - Articulated extraction arm Ø 150 mm, approx. 2 meters long - Extraction pipe with 3 joints and extraction hood (adapter connection to filter housing missing) - No external control unit, without filter monitoring, without start switch Cpodpfsu S Tfgox Aa Eow - Air outlet: 250 x 140 mm Required space (L x W x H): 680 x 660 x 1100 mm Weight: approx. 120 kg Good condition Surcharge for new main filter: EUR 195 net

Condition: ready for operation (used), Year of construction: 1997, A misted Rippert wet separator system in stainless steel design is available for the painting process. Working width: 5000mm, exhaust air capacity: 18000m³/h, water capacity: 700l. Stainless steel chimney included. On-site inspection is possible. Csdpfx Aaswydgzo Eepw

Condition: used, Axial high-performance fan, Axial fan AEG Wall-mounted fan for extraction or ventilation Type AG 80 NY6 No. 4268465 Airflow approx. 11,000 m³/h 6-blade fan Ø 600 mm Internal mounting frame Ø 645 mm External mounting frame Ø 900 mm Installation depth 190 mm Motor power 0.55 kW Power supply 400 Volt, 50 Hz - 6-bladed profiled impeller with bionic blade geometry - Fan blades made of aluminium - Fan housing made of metal with wall mounting ring (galvanized sheet metal) - Metal stand with protective guard, custom-built Cpjdpfxsxciw Io Aa Eew - Mobile Dimensions L x W / H: 1200 x 870 x 1520 mm Weight approx. 90 kg The high-performance fan is in very good condition.

Condition: new, Year of construction: 2025, total height: 982 mm, total length: 4,000 mm, total width: 1,100 mm, volume flow: 18,000 m³/h, warranty duration: 12 months, Extraction wall with 18,000 m3/h Max. power consumption 5 kW/h Electric motor 4 kW Air unit 18,000 m3/h Nicotra ADH 400 Csdpfewz Ic Nox Aa Eopw The full description can be found in the attachment to this listing.

Condition: good (used), Year of construction: 1997, machine/vehicle number: 0001, Offer 24587 Technical data: - Electrostatic filter with control light - Exhausted and cleaned air is recirculated to the work area - Wall-mounted version with two jointed extraction arms - Jointed arm length approx. 9000 mm - Air volume flow approx. 4700 m³/h - Active filter surface 9.2 m² - Drive - Fan 400 V / 0.75 kW - Space requirement approx. W 700 x H 1600 x D 550 mm - Weight approx. 120 kg Cjdown Egrspfx Aa Ejpw

Condition: excellent (used), Beck wall 1000/2000 suction wall Suction wall Type: Beck Wall 1000/2000 Exhaust wall made of steel plate, with 5 suction slots made of perforated plate evenly distributed. For connection to a central suction system via a suction connection piece at the top center of the suction wall. Cleaning opening unscrewable at the bottom front of the wall. Possible applications: Cedpfxok Shuho Aa Ejpw Exhaustion of process air during grinding and milling operations Extraction of gases and light dust Extraction of powder mix or other stationary dust-forming processes width: 1000 mm height: 2000 mm + 100 mm spigot Depth: 300 mm Suction nozzle: NW 250 top center Recommended suction capacity: 3000 m3/h Painting: RAL 5018, RAL 7032 Weight: approx. 75 kg Manufacturer price: 2970,-€ Further articles - new and used - you will find in our store! International shipping costs on request!

Condition: excellent (used), functionality: fully functional, Max. air flow rate: 800 m³/h Max. negative pressure: 1,800 Pa Suction connection: 150 mm Suction connection height: 300 mm Drive power: 1.10 kW Cpedpfx Aoyrrvysa Eew Connection voltage: 220 / 380 volts (4.33 / 2.5 amps) Dimensions (L/W/H): 610 x 740 x 1,150 mm Total depth: 670 V Sound pressure level: 72 dB(A) Weight: 70 kg • Includes flexible suction arm • Suitable for almost all types of dust • Cleanable, durable bag filter

Condition: like new (used), The KEMPER grinding table offers an effective solution to air dust extraction and workstation contamination during grinding operations. The unit is supplied as a complete set including a 1.5 kW fan with capacity up to 3000 m³/h, wall mount, switch, and noise silencer. The whole set has never been used (it is practically new). Air is extracted from below, either through the grate or through the rear wall. The rear louvered wall prevents most of the swarf from bouncing back. The table is made from heavy-duty steel sheet construction, making it very robust and ideal for industrial applications. The side panels contain noise dampening material and are tiltable, allowing for grinding of larger workpieces. A special dust drawer enables easy table cleaning. Cpodpfx Ajyrpapsa Eew Working area dimensions: depth: 750 mm, width: 900 mm. The cost of such a new system from KEMPER is approximately €7,000 net. Stock number: 1112

Condition: used, Year of construction: 2021, Empty weight: 3.043 kg Price: On request Csdpfx Aoyrpmioa Eepw - Year: 2021 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 6015400 - Number of filter bags [pcs]: 200 - Filter length [mm]: 2600 - Filter diameter [mm]: 200 - Filter surface area [m²]: 339 - Connection diameter [mm]: 750 - Number of connections [pcs]: 1 - Main fan [pcs]: 1 - Main fan power [kW]: 45.0 - Control cabinet present: Yes - Transport weight [kg]: 3043kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Camfil Filter Unit CS 610 for Industrial Extraction Systems Manufacturer: Camfil KG Model: CS 610 painted Cedpfoyrnfwjx Aa Eepw Type: Filter unit for industrial extraction systems Article number: 518110 Serial number: 000442739182 Quantity: 2

Condition: good (used), Sawdust extractor,dust extraction,self-cleaning filter,vacuum ALKO FU RG Filter cleaned pneumatically with compressed air pulses during operation, thus high efficiency of the device. 5,5 Kw fan Cpedpfxsip Nqks Aa Esw Capacity 5940 m3/h Filtration area 30m2 Vacuum 3000 Pa Air return with ventilation ducts and summer/winter flap Noise attenuator Manifold with pneumatic gates for connection with machines Control cabinet with technical documentation. Customs sluice Additional 3 kw transport fan for transporting sawdust from the customs sluice Inlet 4 x 250 mm Dimensions: height - 4.35m Width - 1.45m x 1.45m

Year of construction: 2014, condition: excellent (used), Professional pneumatic cleaning cabin with dust extraction. It is used in power plants, cement and gypsum factories, mills and mixing companies, also in the chemical industry As in the metallurgical industry, dust can have a very negative impact on the health of personnel. By using cleaning cabins we prevent dust and hazardous substances from being carried into toilets, changing rooms etc. The cabin provides personnel with a simple option to to clean themselves during working hours, e.g. before The cabin provides staff with a simple option to clean themselves during working hours, e.g. before and during breaks in the morning and at midday and at the end of the shift. Exhaustion made in EX version Year of manufacture : 2014 Filtration surface: 16 m2 Capacity: 2500m3/h Vacuum: 2400 Pa The device is in very good condition Cpodpfjhm E S Ajx Aa Eew

Condition: used, Used item Features and technical data: - with manual changeover lever, painted, stable - Connection diameter: 350 mm Dimensions: approx. 1240 x 900 x 450 mm Cjdpfx Aajyq T Izo Eepw Availability: short-term Storage location: 63934 Röllbach

Condition: new, Year of construction: 2024, new dust extractor Year of manufacture: 2024 For wood dust and chips, designed for commercial use Dust tested according to H3, residual dust content less than 0.1 mg/m³ Suitable for extraction and separation of dry wood and plastic chips High extraction performance with minimal space requirements Maximum performance in this class Cpsdpfx Aeyq T Hksa Ejw Very quiet All models equipped with collision guard Dimensions (LxWxH): 1755 x 830 x 1800 mm Chip collection volume: 2 x 165 l Extraction inlet diameter: 200 mm Weight: approx. 259 kg Filter area: 22 m² Manual filter cleaning Sound pressure level: 72 dB(A) Nominal air volume: 2262 m³/h Maximum air volume: 3700 m³/h Motor: 400 V, 3 kW Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2016, operating hours: 16,859 h, type of input current: three-phase, suction capacity: 5,000 m³/h, filter area: 80 m², NOVUS AirTower Filter Ventilation Tower, 5,000 m³/h. Industrial filter ventilation for welding halls — designed for a variety of technological processes in production plants, primarily for metalworking. Top-mounted air intake and draft-free air discharge at floor level — directly to workstations. Layered filter ventilation principle; the unit does not require ductwork installation. Cartridge filter elements — self-cleaning via compressed air pulses during operation. Filter cleaning by differential pressure — no compressed air loss. Layered ventilation principle: contaminated air is drawn in from above, filtered, and then released at floor level as clean, breathable air without causing drafts, at a velocity below 1.2 m/s, precisely where workers breathe. Covers a broad 270-degree area. The tower operates on the layered ventilation principle, recommended by trade associations and considered the most effective form of air circulation. Year of manufacture: 2016 Operating hours: 16,859 h Specifications: - 3.9 kW EC fan - Capacity: 5,000 m³/h - Filter surface area: 80 m² - Filter cartridges: 4 pcs - Additional high-efficiency final filter (F9 filtration class) provides increased air cleaning performance and additional protection for the fan in case of main filter failure. - 100 l dust collection drawer - Very quiet operation: 75 dB(A) - Filtration efficiency: > 99.6% Codpfx Asyq Nl Nja Espw - Stock No.: 1109

Condition: good (used), Year of construction: 2009, Dust extraction,filtration,welding fume extraction,self-cleaning cartridge filter,pneumatic,vacuum TEKA AIRTECH P24 The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Cpodpfel Dw U Dsx Aa Esw Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 24 000 m3/h Motor power - 15 Kw Fan in sound-absorbing housing Control cabinet with electrical documentation Year of production - 2009 Dimensions: Height - 6.80 m Base width - 1.95 m x 1.90 m Total width - 3.60 m x 2.00 m We have several pieces on offer. The price given in the ad for 1 piece.

Condition: good (used), Year of construction: 2010, Dust extraction,filtering,welding fume extraction,self-cleaning patron filter,pneumatic,vacuum TEKA AIRTECH P18. The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved Cpjdpfsib Dadex Aa Esw for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 18 000 m3/h motor power - 11Kw vacuum - 2250 Pa Filtration area - 324 m2 ( 9 filter cartridges 36m2 each) Fan in sound-absorbing housing Control cabinet with electrical documentation Noise level - 72 dB Year of production - 2010 Dimensions: Height - 5.00m Base width - 1.44m x 1.44m Width with outlet channels - 8.5m Total weight about 2400 kg

Condition: used, Year of construction: 2002, Price: On request - Year: 2002 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Capacity [m³/h]: 35800 - Filter length [mm]: 2000 - Main fan power [kW]: 37.0 - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Csdpsypv Sajfx Aa Eepw Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 1994, radial fan, dust extraction blower, fan, extraction, dust blower -Engine power: 37 kW -Speed: 2940 rpm -Inlet connection: Ø 420 mm -Output connection: 450 x 300 mm -Fan wheel: Ø 700 mm (drawing in the pictures) -Dimensions: 1700/1300/H1080 mm Cedpfxob I Dp To Aa Ejpw -Weight: 430 kg

Condition: good (used), Year of construction: 1998, filter area: 84 m², suction capacity: 2,000 m³/h, Dust extraction, welding fume extraction, cartridge filter self-cleaning, pneumatic, vacuum for plasma, laser, sandblasting, soda blasting, shot blasting and all kinds of dry dust. The filter is cleaned pneumatically by impulses of compressed air during operation, which makes the device highly efficient. Fan on the clean side, which reduces the risk of explosion to a minimum. Cjdpfx Aajttkgxs Eepw Built-in 4 Kw fan Capacity of 2000 m3/h Filtration area 84 m2 Cartridge filter cartridges - 4 pieces. Inlet diameter 200 mm Length - 1.80 m width - 1.10 m height - 1.80 m

Condition: excellent (used), Mobile extraction unit HA26 - 1000 m3/h airflow Csdpfxeypm Dtj Aa Ejpw - 220 volts - Year of manufacture: 1985 - Margin taxation (differential taxation)

Condition: good (used), Year of construction: 2012, Complete extraction system for DMG DMU 125 P for sale Csdpfxsyplx As Aa Ejpw

Condition: not inspected (used), Year of construction: 2020, machine/vehicle number: 0110-36643, functionality: unexamined, total height: 1,500 mm, total length: 750 mm, total width: 600 mm, overall weight: 30 kg, rotational speed (max.): 2,850 rpm, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates timely collection either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Speed: 2,850 rpm MACHINE DETAILS Cpsdpfx Aoyn H Naja Esw Operating voltage: 230 – 240 V Frequency: 50 Hz Rated current: 2.4 A Connected load: 550 W Dimensions & Weight Dimensions (L x W x H): 750 x 600 x 1,500 mm Weight: 30 kg External reference: Pieper – Lot 12

Condition: new, CATALOGUE NUMBER HZ0001 PRODUCT FEATURES As standard, they have mobile containers for sawdust, equipped with a pressure system that allows for tight connection of the container with the machine structure. Thanks to this, it is possible to achieve high negative pressures, without losses at individual connection points. Contaminants from the filter fall directly into hermetic containers with the possibility of quick unloading, which have a special suspension system and mobile wheels allowing for easy and quick transport and maneuvering. The 5.5 kW / 6500 m3/h negative pressure fan, at 2 800 Pa, operates on the principle of a turbine, and the soundproofed design of the fan allows for a significant reduction in the noise emitted during operation. Csdpfx Aaex Ux E Uj Espw The certified control cabinet allows for constant monitoring of the correctness of operation, thanks to the possibility of any location far from the machine. Standard with integrated fan control system and filter cloth cleaning system ADVANTAGES - new machine - CE certificate - high efficiency - professional Scope of delivery: Polyester filter, 5 microns 2 Containers Drive system Filter cleaning using a vibration system with control TECHNICAL DATA - extraction capacity approx. 6500m3/h - engine power 5.5kW - rotational speed 3000 rpm - voltage 400V, 50Hz - extraction nozzle 280 mm - filter surface 16.3 m2 - extraction speed 28 m/sec - number of filters 35 - negative pressure 2800 Pa - filter category G - filter material polyester - dimensions length/width/height 921x1982x2271mm - weight 350kg Net price: PLN 16,000 Net price: EUR 3,810 Net price calculated according to the exchange rate of PLN 4.2/EUR (in case of larger exchange rate fluctuations the price may change)