Clean air extraction system

Holzkraft RLA 125

Condition: good (used), Year of construction: 2022, functionality: fully functional, type of input current: three-phase, filter area: 5.31 m², volume flow: 1,400 m³/h, negative pressure: 2,210 Pa, nominal flow rate: 884 m³/h, overall weight: 205 kg, total width: 830 mm, total length: 1,100 mm, total height: 1,600 mm, input voltage: 400 V, noise level: 71 dB, extraction nozzle diameter: 125 mm, tank capacity: 165 l, Return device with slight signs of wear. Serial number: 125PM2246040001 Year of manufacture: 2022 Gsdpfxjwgz T Sj Agbjbg Dust-tested according to H3, residual dust content less than 0.1 mg/m³ Suitable for vacuuming and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum performance in this class Very quiet All models with collision protection Area of application Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Large, mobile chip containers with clamps and chip collection bag Dust extractor delivered fully assembled, allowing for quick installation All models are mobile For model RLA 210: Optimal chip distribution into the Chip container due to large filter surface Filter description Ultra-compact with maximum filter surface Filter material made of aluminum-coated polyester fleece, resulting in a long service life Filter comes standard with an antistatic design, tested and approved according to category M-BIA The fan is installed downstream of the filter If a warranty is stated in the item description and/or in the description of the scope of delivery, this does not affect your statutory rights against your seller. Please refer to the warranty conditions for the scope, duration, contents, and the guarantor. We assume no liability for printing errors, mistakes, or incorrect representations. Technical and visual changes are reserved. Some images show optional accessories. Delivery is subject exclusively to our terms of delivery and payment. Sales are made through specialist retailers.

Condition: new, Year of construction: 2024, pressure: 8 bar, Miter setting horizontally 15°- 90°15° infinitely variable saw motor 5.50 KW (400 volts) saw blade 600 mm traversing range rear stop 180 mm working height 940 to 1000 mm adjustable via feet 2 x suction nozzles (above in the hood and below) net weight 600 kg WxDxH 135x140x150 cm RAL 9007 gray aluminum rotary plate polished nickel steel Saw head with recirculating ball guides designed with high accuracy and long service life and high rigidity. Sawing material can be preloaded with low pressure when the hood is open. Hydropneumatic sheet feed Chip flow towards the extraction hood. Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously Gbedpfjgwt S Tsx Agbjg • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system Othgf • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 230 mm Hxdcvds7y • Saw blade 600mm • Saw blade not included! Our NC pusher system ensures that your machining parts are positioned at the desired machining position on our UK 600 HA 90°. A gripper clamps the material, the NC control positions the material automatically. The tension and the sawing process are then triggered. The positions are previously programmed into the program control. Once the machine tool has completed your machining, it automatically moves to the next sawing position. Depending on the processing part, several parts can also be clamped on top of each other/next to each other and positioned at the same time. It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. High extraction capacity with low space requirement Maximum performance in this class Very quiet Range of application Clean air extraction systems for wood chips and wood dust Designed for commercial use For all woodworking machines with corresponding extraction nozzle diameter Can also be used for several dust sources High-quality, sophisticated construction Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, thus flexible in use Large inspection openings Large-dimensioned, mobile spill container with clamp and spill collection bag unit already completely assembled at delivery, therefore quickly usable mobile Description of the filter Ultra compact with maximum filter area Filter material made of polyester fleece, aluminized, washable and therefore with long service life Filter standard in antistatic design tested and approved according to category M-BIA Godpfx Ajcnw U Degbebg Filter resistance monitoring via differential pressure box, adjustable with warning lamp on the control box The fan is connected downstream of the filter Equipment details: With innovative locking device for safe container positioning All units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. Scope of delivery: Metal fan wheel Inspection opening

Condition: good (used), Year of construction: 2001, Parts shown by hand not come. Technical data shown on pictures. Gbsdpfeuxrv Hjx Agbeg

Condition: excellent (used), Year of construction: 1999, operating hours: 6,000 h, functionality: fully functional, travel distance X-axis: 505 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 610 mm, feed rate X-axis: 20,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, controller manufacturer: Heidenhain, controller model: TNC 426, workpiece weight (max.): 300 kg, table width: 380 mm, table height: 1,004 mm, table length: 920 mm, overall weight: 250 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 18,000 rpm, spindle motor power: 10 W, Equipment: documentation/manual, rotational speed infinitely variable, The machine is equipped as follows: -Tool holder: SK 30 -Tool changer with 24 places (automatic tool change) -Coolant system -Spindle cooling -Mist extraction -Chip drawer -RENiSHAW measuring probe Gbedpsv A Tyqofx Agbog

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, overall weight: 1,154 kg, load capacity: 210 kg, arm reach: 3,095 mm, We offer industrial robots from the manufacturer KUKA. The scope of delivery includes the robot arm, control cabinet and the associated cables. Gbedpfxorlmqko Agbjg The robots come from a functioning system and have been professionally dismantled. We carry out a functional test and check the robots. If you are interested, we offer the opportunity to demonstrate the functions to ensure that they meet your requirements. We grant a 14-day right of return. Further warranty services are excluded. - Supplement at additional cost - We are pleased to be able to offer you a new function for our robots: The Siemens S7-1200 Profisafe safety controller. With this controller, you can easily integrate an emergency stop function, a safety gate and a start-stop connection via the Profisafebus. The controller is fully configured and programmed so that you can implement a simple stand-alone solution with a robot and a safety fence. If required, we can also offer you additional support during commissioning. We have an extensive stock of these robots and the prices quoted are package prices. Discounts are negotiable for larger order quantities. We invite you to contact us again to discuss further details. Sale exclusively to traders.

Year of construction: 1997, condition: good (used), - Working width (mm): 1300 - CSD system Gbedpoidi Ivofx Agbsg - Cross sanding unit - Longitudinal sanding unit - Shoe - Brush unit - Ionization

Year of construction: 2001, condition: like new (used), Roller coater Gbjdsfw Nc Uopfx Agbeg Brand:Sorbini Type:T/20-MF No:MR1RFF21488 Year:2001 The T20 roller coater has been designed as an addition to SORBINI´S extended line of products. The machine is used for finishing flat boards in general with various types of coating products (e.g.polyurethane, polyester, acrylic and water-based finishes) The modular design makes it possible to obtain a wide range of applications which cater for all specific user requirements. Techn info: Working width max 1300mm Thickness of workpiece 0-80mm Feeding speed 3-20 m/min Feeding motor0,737kw Doctor roller motor 0,75kw Applicator roller motor 0,75kw Doctor roller diameter 174mm Applicator roller diameter 248mm Working hight 80 till 950mm Compressed air requirements 6 bar 9l/min Air pump pressure 2-10bar Air pump capacity at max pressure 30l/min of 10 bar Dimension 950x2550x1450mm (lengthxwidthxhight) Total weight 1220Kg Stock no:104326BXA

Condition: used, Year of construction: 2018, 5.5 kW main motor, frequency converter (2000-6000 rpm), motorized 2-axis scoring unit with its own drive. Motorized height adjustment in 0.1 mm increments. Motorized angle adjustment in 0.1° increments with digital display. 1090 x 630 mm miter gauge. Narrow and wide extraction hoods with quick-change function. Clamping shoe, sliding block, and manual quick-release clamp. Sliding carriage length 2150 mm (cutting length 2170 mm) - Quick-Scoring equipment packages - Scoring unit adjustable without tools from 2.8 to 3.6 mm - Miter gauge +45° - 45° - On/off switch on the sliding carriage. Storage location: Nattheim Godpfx Agevvkm Uobobg

Condition: used, Year of construction: 2018, operating hours: 3,178 h, functionality: fully functional, machine/vehicle number: 667171, overall weight: 1,154 kg, load capacity: 210 kg, arm reach: 3,096 mm, The machine in question is a KUKA KR 210 R3100 ultra Year of manufacture 2018 We are also happy to offer you the robot overhauled! The robot includes the following options: BoardPackage EthernetKRL Gbedjrnrprjpfx Agbjg LoadDataDetermination Profinet KRC-Nexxt RemoteService SafeOperation UserTech