Used Evo for sale (1,820)

Condition: used, functionality: fully functional, machine/vehicle number: H2X392H01125, Year of construction: 2017, operating hours: 9,883 h, load capacity: 2,500 kg, lifting height: 4,050 mm, free lift: 150 mm, fuel type: gas, mast type: standard, construction height: 2,675 mm, fork length: 1,200 mm, drive type: Treibgas, LPG forklift Chassis number: H2X392H01125 Load center: 500 ISO class: ISO class 2 = 1,000 – 2,500 kg Mast type: Standard Transmission: Hydrostatic Condition: Refurbished with warranty Technical condition: Very good Front tires type: Superelastic Front tires condition: New Rear tires type: Superelastic Rear tires condition: 80 – 100% Lajdpfxjtzg Ine Afijh Description: Workshop inspected, new UVV & service inspection, new paintwork Double pallet clamp, 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, CE certificate, safety light, joystick, wiper, single pedal, LED, seat,

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Equipment: chip conveyor, documentation/manual, Deckel Maho DMU 50 evo Linear with TNC 530 control from Heidenhain, TOP condition Technical data: >> Year of manufacture 2006 >> Manufacturer Heidenhain, type iTNC 530 >> Travel paths X500/Y450/Z400 >> C-axis 360 degrees >> B-axis 0 degrees to 161.955 degrees >> Tool holder HSK A63 >> Max. spindle speed up to 18000 rpm >> Feed continuously programmable up to X, Y, Z 20000 mm/min C-B axis continuously programmable up to rapid traverse speed Lsdpfx Aevyr Tdsfieah >> Rapid traverse Y- Z axis 50 m/min X-axis 80 m/min (linear drive) B-axis 40 rpm C-axis 50 rpm >> Tool magazine: Double gripper 60 magazine spaces >> Table clamping area Ø 500 x 380 mm T-slot spacing 63/14H7 >> Table load 200 KG >> Dimensions and weight: approx. Machine without control and attachments Depth 3.0 meters Width 2.4 meters Height 2.6 meters Weight approx. 7000 kg >> Operating voltage 400 V >> electr. Handwheel Heidenhain HR 410 >> Power connection 17 KVA >> Chip conveyor >> Active spindle cooling >> Mist extraction >> IKZ 40 bar >> Coolant lubricant cleaning system (fleece filter system) >> Spray gun >> Visiport >> Sealing air on the measuring system >> Preparation for robot loading >> 3D probe Heidenhain TS640 >> 3D Quick Set >> Kinematics >> Blum laser for tool measurement and breakage control Cpvnunmsoi >> Complete documentation Dn2F2R The following work was carried out: >> Generally overhauled main work spindle >> Complete maintenance: All cooling hoses and pneumatic hoses replaced, new filters, fluids and belts replaced. Scrapers, etc. Complete cleaning. >> Geometrically measured (acceptance protocol) About the machine: A Deckel Maho DMU 50 evo Linear machining center with a TNC 530 3D path control from Heidenhain is offered. The machine is in very good condition. The main spindle on the DMU was overhauled (replacement spindle), completely serviced and an acceptance protocol was created. Take advantage of the opportunity to view and try out the machine on site with power on.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 6,833 h, load capacity: 2,000 kg, lifting height: 5,475 mm, free lift: 1,869 mm, fuel type: gas, mast type: triplex, construction height: 2,471 mm, fork carriage width: 980 mm, fork length: 1,100 mm, drive type: Treibgas, LPG forklift Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Double pedal Condition: Refurbished, no warranty Technical condition: Good Front tires type: Superelastic Front tires size: 200/50-10 Lodpfsw Ep Twsx Afisah Front tires condition: 60 - 80% Rear tires type: Superelastic Rear tires size: 18x7-8 Rear tires condition: 60 - 80% Description: Delivery with new FEM 4.004 inspection including test book. If you have any further questions, feel free to call us. In addition to this model, we have around 150 other industrial trucks in stock. Visit our homepage fleischmann-foerdertechnik. We are happy to offer leasing & financing as well as delivery on favorable terms. Trade-in of Linde equipment is also possible – even if you do not purchase a device from us. Listed operating hours were read as of the date of entry. Subject to prior sale, changes, and errors. Side shifter, fork positioner, Durwen fork positioner with separate side shifter, 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, full free lift, safety light, non-marking tires, outside mirrors,

Condition: new, Year of construction: 2022, X-BAG EVO Easy to handle. Easy to maintain, easy to set up. X-BAG evo is the ideal solution for those who need to quickly pack small quantities of material (fresh goods, small parts, spare parts, instruction manuals, small industrial components, etc.) in hermetic packaging with different formats and different types of film. Technical features Power supply V 220/240 Installed MAX power kW 0.5 Pneumatic supply bar 40lt/m up to 6 bar Production per hour p/h (pph) 0-1000 MAX Coil dimensions (diameter) mm 250 MAX Film spool dimensions (width) mm 360/410/520 - Film thickness micron 15/50 - Envelope length mm 50/330 (mm 580 with tape) - Envelope width mm 170/185/235 (depending on collar) Lsdpfxeuakmwe Afieah - Processable film: PE, polyolefins, macroperforated, laminated, biodegradable film, Cartene) Horizontal sealing type with double sealing wire and cutting wire Machine dimensions mm 800x850x1500 Machine weight (net/gross) kg 130/165(MF99MB75) 135/170 (MF99MB76)

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, load capacity: 1,600 kg, fuel type: electric, mast type: duplex, LINDE E16-P02 Evo electric forklift truck Equipped with: Willenbrock 03/17 48V 625Ah battery with very good good performance, measured at 50.4V. last service Service 03/2024 with 72 hours desulphation; Duplex mast with full free lift; 3rd valve, sideshift; Load protection grille (can be easily removed); Full cab with heating and windshield wiper; LED work lights at the front; LED work lights at the rear; rear safety light; Comfort seat with lumbar support and seat heating; Double pedal control; Trailer coupling Lifting height 3,840 mm This Linde E16 electric forklift truck was built in 2017, has 13,747 original operating hours according to the meter and is in a well-kept overall condition with the usual signs of use and wear of this equipment class, ready for immediate use! Sold as a used machine excluding return, guarantee and warranty. Ledpfxet Suqxe Afisah Net price 10.900,-€ // Gross price 12.971,-€ - Inspection / test ride possible - Shipping can be organized nationwide, the costs depend on the distance - Our leasing partner will be happy to provide you with an attractive leasing / financing offer!

Condition: ready for operation (used), Year of construction: 2007, The TAE evo 602/P3 chiller is a compact machine designed for use in industry (but not only), equipped with hermetic scroll compressors, a built-in ~3Bar pump and an innovative finned evaporator mounted inside a hydraulic buffer tank. Refrigerant is R407C. Designed to work in pressure (closed) systems but can works in open type circuits. Capacity ~110kW for +12/7°C and +35°C. We provide 3-month guarantee (concerns the area of Poland). The transport service is not included. Lsdpfxspuh Aqe Afioah

Condition: new, Year of construction: 2023, rebar bending machine evo 36 400 Volt 50 Hz 3 ph. capacity up to 36 mm at R=65kg/mm2 Lasdpfshiyadsx Afijh weight 320 kg with 6 round tooling 50-60-70-80-95-120 mm 1 pc. square bolt foot pedal CE declaration

Condition: excellent (used), Zeiss Lsdpfjvxubhex Afisah Type: EVO 50 The instruments in the EVO product family combine powerful scanning electron microscopy with an intuitive operating concept that is equally well suited to experienced users and newcomers. Thanks to its extensive options, EVO can be precisely tailored to your requirements, regardless of whether you work in the field of life sciences or materials science or in routine industrial quality control and error analysis. Scanning electron microscope EVO 50, EDS from Oxford Ultim Max 100 SDD detector 09 / 2019 Dimensions: DxLxH 930 x 1930 x 1600 mm 100 mm² sensor size / 130,000cps Weight: approx. 750 kg Condition: used (Changes and errors in the technical data, information is reserved!) Please inquire about transport options before purchasing. We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), axle configuration: 3 axles, first registration: 01/2024, suspension: air, color: grey, tire size: 385/65 R22,5, Year of construction: 2024, Equipment: ABS, = Further options and accessories = - Lift axle - Disc brakes = Remarks = Inner length: 8,022 mm Inner width: 2,390/1,944 mm Inner height: 1,600 mm Lajdsv D Hiuspfx Afish Capacity: 29.9 m3 Hyva Alfa 191-5-5830 K1532 lifting cylinder = Further information = General information Model year: 2025 Registration number: OV-20-FS Axle configuration Tyre size: 385/65 R22.5 Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Dimensions Dimensions (L x W x H): 1404 x 260 x 400 cm Weights Empty weight: 5,260 kg Payload: 36,740 kg GVW: 42,000 kg History Number of owners: 1

Condition: new, Year of construction: 2024, functionality: fully functional, The REPLAY evo range offers basic products without sacrificing excellent quality. Equipped with advanced new and exclusive systems, it represents the most competitive solution of the new machines with bell from minipack®-torre. REPLAY 55 evo combines technological performance with essential and compact shapes, without sacrificing the excellent quality that characterizes minipack®-torre machines. - Power supply V 200/230 - Phase ph 1 - Installed MAX power kW 3.15 - Production per hour p/h (pph): 0-300 - Sealing bar useful dimensions: 540x390 mm - MAX product dimensions: 500x380x200 mm - MAX coil dimensions (diameter): 250 mm - MAX film reel dimensions (width): 600 mm - Work table height: 940 mm Lsdpfx Afouakl Heijah - Machine dimensions with protective cover open: 1260x810x1400mm - Machine dimensions with closed protective cover: 1260x810x1190mm - Machine weight (net/gross): 105/126 kg

Year of construction: 2021, operating hours: 1,074 h, condition: ready for operation (used), General Data Laedpfxswt Uvto Afieh Measurements width 2190 mm Measurements depth 5510 mm Measurements height 2226 mm Machine weight 5900 kg Main Drive Spindle speed range 1500 Spindle motor power 18 kW Spindle bore Ø130 mm Number of axis 2 Workpiece Workpiece drm over bed 600 mm Workpiece drm over support 360 mm This COMEV PicoDue 300 EVO was manufactured in 2021. It features a powerful 18 kW motor, a spindle speed of 1,500 rpm, and a RAPID Original quick-change tool holder with 4 positions. The CNC lathe has a spindle bore of Ø130 mm and can handle workpieces up to Ø600 mm over the bed. Ideal for single-piece and small to medium series production, mainly in aluminum and structural steels. Contact us for more information about this machine. Application Types Turning

Condition: excellent (used), Year of construction: 2000, Jung Supromatic HF 50 EVO Jung Supromatic HF 50 EVO Surface Grinding Machine, year of manufacture 2000, in excellent, fully overhauled original condition. The machine comes from the technical center of a renowned German mechanical engineering company. Technical Data: Year of manufacture: 2000 Technical specifications Clamping surface (L x W in mm): 600 x 200 Maximum grinding area (L x W in mm): 600 x 250 Maximum magnet size (mm): 500 x 200 Maximum grinding wheel dimensions (mm): 225 (250) x 25 x 51 Table to spindle center distance (mm): Max. 400 Table longitudinal feed (reciprocating, m/min): 1 – 20 Creep feed (mm/min): 0 – 500 Grinding spindle drive speed (rpm): 800 – 4200 Power output kW (with creep feed): 1.6 – 2.2 Approximate machine weight: 2.0 t Accessories and Equipment: • Magnetic chuck • Coolant system • Machine feet • Grinding wheel About the machine: We offer a Jung HF 50 EVO surface grinding machine, year 2000, in excellent condition. The machine is, of course, fully functional and has only approx. 50 operating hours since its overhaul. All slides run very smoothly and evenly. Even at high speeds, the Jung operates very quietly. This newer generation of surface grinders is highly user-friendly and enables the production of surfaces with a low Rz value. Take the opportunity to inspect this machine under power on site and see its condition for yourself. Scope of overhaul: Ledpfx Afowzmgysioah Mechanical service: • Complete mechanical overhaul • Hydraulics • Infeed mechanism • Lubrication • Cross and vertical adjustment • Grinding spindle • Wheel dresser • Repainting in new machine quality Geometric service: • Guideway grinding by the manufacturer (optional) • Scraping of guideways • Column realignment, measurement, possible scraping/grinding, refitting with pressure plates, inspection and preparation of guideways • Adjusting crosshatch at spindle head • Alignment of wheel dresser • Regrinding of table and magnet • Machine acceptance according to manufacturer’s test sheet Electrical service: • Replacement of complete wiring, all limit switches and pushbuttons • Conversion of X-axis from cam switch to contactless limit switches (HF 50) • New control cabinet • RSF position display (2- or 3-axis readout) • Magnet holding force control for 24V or EP magnetic chuck Control modernization: • New auxiliary control cabinet (operator panel top right) • Thyristor control for grinding spindle drive • Manual cylindrical wheel dressing with top dresser or side dresser (for Diaform operation)

Condition: excellent (used), -M4 Soleo Lsdpfewx I Utox Afijah -Overall dimensions (LxWxH): 1730x1526x2480 mm -Usable baking width: 1370 mm -Usable baking depth: 965 mm -Baking surface per deck: 1.32 m² -Number of trays per deck: - 4 of 400 x 600 - 4 of 460 x 660 - 3 of 460 x 760 - 2 of GN 530 x 650 -Heating power: 30 kW -Connected load: 19 kW -Voltage: 400 V / 3 PH+N / 50-60 Hz -Weight: 759 kg -Year of manufacture: 11/2017

Condition: used, Year of construction: 2023, Year: 2023 Condition: excellent Technical parameters: * max. diameter and width of the foil - 300 x 800 mm * max. height of the product - 200 mm * number of packages - 0 - 300 pcs/h * working height of the machine - 940 mm * power consumption - 6.6 kW * connection - 400 V - 50 Hz * machine dimensions - 1950 x 1000 x 1480 mm * sealing strips - useful - 840 x 590 mm Lodpfxoww Hkds Afisah

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, operating hours: 20 h, The EVO is the latest innovation in sheet metal processing. It is equipped with numerous innovative and patented features that increase your production capacity and productivity, while offering the lowest total cost of ownership. The high-quality components used in this machine and the latest version of the BENDtronic® control system, which is installed as standard on all EVO machines, are particular highlights. Available from stock: HAEUSLER EVO 31031 4-roll round bending machine / roll bending machine Manufacturer: Haeusler Type: EVO 31031 4-roll round bending machine / roll bending machine Origin: Germany / Switzerland Year of manufacture: 2024 Condition: NEW, exhibition machine Availability: immediately Performance: Working width 3100 mm Round bending capacity 14 mm Bending capacity 12 mm Not the right machine? As a representative of Haeusler, we can put together and offer you your desired machine according to your requirements. Laodpfx Afjwp Hlreish Please do not hesitate to contact us.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 4,624 h, load capacity: 1,800 kg, lifting height: 5,475 mm, free lift: 1,869 mm, fuel type: electric, mast type: triplex, construction height: 2,471 mm, fork carriage width: 1,040 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-Wheel Forklift Load center: 500 mm ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Double pedal Condition: Refurbished without warranty Technical condition: Good Front tire type: Superelastic Front tire size: 200/50-10 Front tire condition: New Rear tire type: Superelastic Rear tire size: 140/55-9 Rear tire condition: New Battery voltage: 48V Ledpowwdcqjfx Afijah Battery capacity: 625Ah Battery manufacturer: Hawker Battery type: PzS Battery year: 2019 Battery condition: 60 - 80% Description: Handover with new FEM 4004 inspection including inspection book. If you have further questions, feel free to call us. In addition to this model, we have around 150 other industrial trucks in stock. Visit our website fleischmann-foerdertechnik. We are happy to offer you leasing & financing as well as delivery at attractive rates. Trade-in of Linde equipment is also possible – even if you do not purchase a machine from us. The specified operating hours were read at the time of listing. Subject to prior sale, changes, and errors. Sideshift, fork positioner, Integrated Kaup fork positioner with sideshift 3rd valve, 4th valve, rear work light, front work light, half cab, full free lift, safety light, seat heating, Red/white LED light bar front and rear, beacon, Bluespot front and rear.

Year of construction: 2022, condition: ready for operation (used), General Data Machine weight 3700 kg Main Drive Spindle speed range 24000 Lasdpfx Aewri R Nefijh Spindle motor power 8.5 kW Number of axis 3 Movement X-Axis Rapid Traverse 80 m/min Y-Axis Rapid Traverse 80 m/min Z-Axis Movement 250 mm Z-Axis Rapid Traverse 12 m/min Tools Type of tool holder HSK 63F Additional Equipment Remote Control Pendant Z-axis Tool Length Sensor 4 Vacuum Suction Cups // 4 Additional Positioning Pins (long) Automatic Dust Shoe Height Adjustment // Automatic Part Pushing System Receiving Table for Finished Parts (2800 x 2070 mm) Loading Table (2800 x 2100 mm, 2000 kg Capacity, 500 mm Stack) CNC Control System TPA – WSCM Straight-line Nesting Software (Included) Pneumatic and Electrical Preparation for Drill Head Upgrades ECO Mode for Energy Saving This 3-axis INFOTEC 3121 PRO EVO was manufactured in 2022. It features a working area of 2200 x 3100 mm, Z-axis travel up to 350 mm, and a high-speed main spindle with a power of 8.5 kW and speed range up to 24,000 RPM. Equipped with a 14-position tool magazine and a robust vacuum table with 6 zones. Ideal for advanced CNC wood machining. Contact us for more information about this machine. Application Types CNC Wood Machining

Condition: excellent (used), Year of construction: 2018, Table size 600 x 500mm diameter, table load 400 kgs, Traverses XYZ 600 x 500 x 500mm, B axis -5/+110 degrees, Lsdswnpzaopfx Afisah C axis 0.001 degrees Rapid feedrates 80m/min, 120 station toolchanger, spindle taper HSK 63 spindle speed 20,000rpm, Siemens 840D eRGOline control Swarf conveyor. Through Spindle Coolant

Condition: used, functionality: fully functional, machine/vehicle number: H2X392F01684, Year of construction: 2015, operating hours: 5,995 h, load capacity: 2,500 kg, lifting height: 3,700 mm, free lift: 200 mm, fuel type: diesel, mast type: standard, construction height: 2,450 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift Fahrgestellnummer: H2X392F01684 Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Standard Transmission: Hydrostat Technical condition: Very good Front tires Type: Superelastic Front tires Condition: 80 - 100% Rear tires Type: Superelastic Rear tires Condition: 80 - 100% Description: Workshop checked, new UVV & inspection, new paintwork Sideshift, 3rd valve, rear working lights, front working lights, roof cover, windshield, CE certificate, Lajdotfmgdjpfx Afijh

Condition: used, mileage: 380,106 km, power: 368 kW (500.34 HP), first registration: 08/2019, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 09/2024, gearing type: automatic, emission class: euro6, overall weight: 18,000 kg, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, BrakeMatic, ESS, EBA2, LGS, xenon lights, automatic lights, air-conditioned driver's seat, leather interior trim, fully retractable cool box under the sleeping berth, storage compartment on the rear cab wall with gooseneck light, control module, alarm clock and charging station, 7' radio with DAB+ and MAN sound system, retractable TV, built-in cupboard, removable TV berth, roof light set and side bars as well as steps, stainless steel fifth wheel coupling Jost JSK 42, height 150 mm, fifth wheel lead 585 mm, fifth wheel plate Jost 40 mm Ledpev Ndq Tefx Afisah

Condition: used, Year of construction: 2016, operating hours: 2,256 h, load capacity: 3,500 kg, lifting height: 4,900 mm, fuel type: diesel, construction height: 3,150 mm, gearing type: automatic, Equipment: cabin, head guard, Linde forklift H35D EVO FIN: G04614 * 2,256 operating hours * Tires front and rear solid rubber * Duplex mast * Hydraulic connections for shovel/reversible fork * Fork tines 1200mm * Heating * Radio Lasdpfx Aot Aqvlsfieh * Load capacity 3.5 t * Overall height 3.15m Other: * 1 previous owner * UVV New general inspections/safety tests or weight reductions/increases are available on request. We are happy to help you obtain export/transfer license plates, and we can also transfer your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English and Russian!---- No liability for printing and spelling errors, changes, prior sale and errors reserved!----Who are we? Leible Commercial Vehicles is a family business based in Kehl am Rhein. Thanks to our many years of experience in the areas of reconditioning and sales of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Commercial Vehicles lies in the sales of new and used commercial vehicles. A wide range of vehicles can be found on 11,000 square meters. Our corporate philosophy is characterized by fairness and seriousness. Since customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who supports them when buying or selling vehicles. See for yourself! Our service for you: Loading vehicles We are happy to help you load the vehicles you have purchased. Organizing special transports We are happy to help you organize special transports. Day numbers / export license plates We are happy to help you obtain export license plates / short-term license plates. Completing customs formalities We are happy to help you with customs matters.

Condition: used, Year of construction: 2017, fuel type: diesel, Equipment: cabin, * Anfragen gerne per WhatsApp * LInde H 80-3/900 * Diesel Laedpfen E Sxgjx Afieh * EVO * 8000 kg NL * 14055 kg GG * 3+4 Steuerkreis * Klima * Straßenbeleuchtung * Arbeitsbeleuchtung * Rundumlicht * Rückfahrcamera * Reifen 8.25-R15 * 315/70R25 * deutsches Fahrzeug * 1. Hand * gegen Aufpreis mit Mehrpalettengabel * · Netto-Verkauf innerhalb der EU wird nur noch mit MWST Kaution und dem Nachweis der Zulassung im Bestimmungsland (Gelangensbestätigung) durchgeführt, · Verkauf nur an Gewerbe, Transport zum Hafen möglich, Dieses Angebot ist unverbindlich und freibleibend. Irrtum und Zwischenverkauf vorbehalten. · Keine Gewähr auf Eingabefehler. Besichtigungen nur nach Vereinbarung, WhatsApp

Condition: excellent (used), Year of construction: 2007, operating hours: 1,380 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 350 mm, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 30, swivel angle B-axis (max.): 108 °, swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 450 mm Travel Z-axis: 400 mm B-axis: 108° C-axis: 360° Speed range: 18,000 rpm Tool holder: HSK-63-A Tool positions: 30 Table size: 500 x 380 mm Rapid traverse X-axis: 80 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 50 m/min Feed rate X-axis: 20 m/min Feed rate Y-axis: 20 m/min Ljdpowu Evtofx Afijah Feed rate Z-axis: 20 m/min MACHINE DETAILS Control: Heidenhain iTNC 530 Machine weight: 6,500 kg Operating hours: 1,380 h Power-on hours: 19,803 h EQUIPMENT - 5-axis simultaneous machining - Tool changer - NC rotary tilting table - Internal cooling (IKZ) prepared for 40 bar - Paper band filter - Chip conveyor - 3D probe: Renishaw preparation (probe not included) - Blum laser tool measurement

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, AMADA HFE M2-EVO CNC DOWNSTROKING PRESSBRAKE 100 TONNES X 3 METRES Lasdpjwl Ncxefx Afieh 8 AXIS CNC CONTROL YEAR 2017. AMDA BENDING PAD CONTROL Fitted with Eco drive system providing benefits such as 20% less energy usage, reduced maintenance, less oil consumption, lower noise levels and increased reliability.

Condition: good (used), Year of construction: 1998, Number of axes: 5 Feed speeds in the X/Y/Z axis: 500/420/380 mm Laedpfxetdgizs Afish Feed speeds in the C/B axes: 180°/360° Work table dimensions (L x W): 500 x 380 mm Maximum workpiece weight: 350 kg Spindle power: 15 kW Maximum spindle speed: 18000 rpm Capacity of the tool magazine: 30 pcs. Overall dimensions (L x W x H): 3360 x 2550 x 2600 mm Total weight of the DMU 50 eVolution machine: 6000 kg