Used Evo for sale (1,819)

Condition: used, functionality: fully functional, machine/vehicle number: H2X386X01165, Year of construction: 2020, operating hours: 13,652 h, load capacity: 2,000 kg, lifting height: 3,140 mm, free lift: 1,500 mm, fuel type: electric, mast type: duplex, construction height: 2,120 mm, fork length: 1,800 mm, empty load weight: 3,909 kg, drive type: Elektro, Electric 4-wheel forklift Chassis number: H2X386X01165 Load centre: 500 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Duplex Technical condition: Good Front tyres type: Solid rubber Lodpfjw Irznex Ab Ueah Front tyres condition: 60 - 80% Rear tyres type: Solid rubber Rear tyres condition: 80 - 100% Battery voltage: 48V Battery capacity: 750Ah Battery type: PzS Battery year: 2020 Battery condition: 60 - 80% Description: Workshop inspected with UVV approval Clamp fork, sideshift, fork positioner Attachment with shorter/longer forks can be configured as needed 3rd valve, 4th valve, rear work light, front work light, roof cover, CE certificate Front & rear work lights, BlueSpot rear, side safety bars

Condition: excellent (used), Year of construction: 2022, operating hours: 1,530 h, functionality: fully functional, power: 129 kW (175.39 HP), For sale: Arjes Impaktor 250 EVO Year of manufacture: 10/2022 Operating hours: 1530 Equipped with paddle shaft for wood, plastic, commercial waste, etc. A concrete shaft is also included. Lasdpfx Absw Nyt Is Ueh The machine is fully operational and can be inspected during operation.

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 8,747 h, load capacity: 1,600 kg, lifting height: 4,625 mm, free lift: 1,519 mm, fuel type: electric, mast type: triplex, construction height: 2,121 mm, fork carriage width: 980 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift Load centre: 500 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Double-pedal Condition: Refurbished without warranty Technical condition: Good Front tyre type: Non-marking Front tyre size: 18x7-8 Front tyre condition: 60 - 80% Lajdpfxexllt Do Ab Uoh Rear tyre type: Non-marking Rear tyre size: 140/55-9 Rear tyre condition: 60 - 80% Battery voltage: 48V Battery capacity: 500Ah Battery manufacturer: GNB Battery type: PzS Battery year of manufacture: 2014 Battery condition: 60 - 80% Description: Handed over with new FEM 4.004 inspection incl. inspection booklet Sideshift, Sideshift pre-installed, 4th valve to carriage, 3rd valve, 4th valve, rear work lights, front work lights, front windshield, full free lift, safety light, single-pedal control,

Condition: used, Year of construction: 2011, X-Y working area: 4,422 x 1,753 mm X-Y travel: 4,955 x 1,918 mm Z-axis travel: Z = 400 mm 5-axis MORBIDELLI milling spindle C-axis rotation: 650° B-axis tilt: 290° (-10°) Power: 11 kW at 20,000 rpm, adjustable via inverter Liquid cooling HSK 63F interface Chip conveyor Automatic CNC central lubrication RAPID 24 tool changer (24 tool positions) Drill head extension with 30 + 6 spindles 8 positioning aids 2 cross lasers Vacuum pump 250 m³/h PC control with Windows Office Weight approx. 5,000 kg Laedpfew Sy R Esx Ab Ush Storage location: Customer

Condition: excellent (used), Year of construction: 2002, 5-Axis Machining Center - Universal DECKEL MAHO DMU 70 EVO Year of manufacture: 2002 Control: MillPlus iT Heidenhain Machine hours: 33,289.6 h Spindle hours: 10,533.5 h Technical Data: X-axis travel: 750 mm Y-axis travel: 600 mm Z-axis travel: 520 mm Main Spindle: Speed range - main spindle: 20 - 18,000 rpm Drive power - main spindle: 35 / 25 kW Max. torque: 130 / 87 Nm NC Rotary Swivel Table: Clamping surface: 700 x 500 mm Swivel range, B-axis: 180° Rotatable, C-axis: 360° Max. table load: 350 kg Centering bore: 30 H6 mm T-slots: 7x 14H7 x 63 mm Table speed range: 21.5 rpm Tool Magazine: Number of tool positions: 32 Laedpfxjxf Hlho Ab Ueh Max. tool length: 315 mm Max. tool diameter: 105 mm Max. tool diameter with adjacent pockets empty: 130 mm Max. tool weight: 6 kg

Condition: excellent (used), Year of construction: 2013, operating hours: 26,000 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, rapid traverse Z-axis: 80 m/min, controller manufacturer: Heidenhain, controller model: ITNC 530 HSCI, rotational speed (min.): 20 rpm, rotational speed (max.): 18,000 rpm, spindle speed (max.): 18,000 rpm, coolant supply: 40 bar, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Universal machining center DMG MORI DMU 60 Evo Linear Year of manufacture: 2013 Control: Heidenhain ITNC 530 HSCI Program run hours: 26,000h Technical data: Spindle speed: 20 – 18,000 min-1 Tool holder: SK 40 Tool magazine with 30 stations Through-spindle coolant (IKZ) with 40 bar Travel distances: X/Y/Z 600 mm x 500 mm x 500 mm NC rotary-swivel table 600 mm x 500 mm Swivel range B-axis: -5° to +110° C-axis: 360° Accessories: Infrared probe TS 649 Blum laser tool measurement Coolant system IKZ with 40 bar Chip conveyor Electronic handwheel Ledpfx Asvv Nn Rjb Ujah Operation mode 4

Condition: used, functionality: fully functional, machine/vehicle number: H2X386X01177, Year of construction: 2020, operating hours: 13,856 h, load capacity: 2,000 kg, lifting height: 3,140 mm, free lift: 1,500 mm, fuel type: electric, mast type: duplex, construction height: 2,120 mm, fork length: 1,800 mm, empty load weight: 3,909 kg, drive type: Elektro, Electric 4-wheel forklift Chassis number: H2X386X01177 Load center: 500 mm ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Duplex Technical condition: Good Front tires type: Superelastic Front tires condition: 80 - 100% Rear tires type: Superelastic Rear tires condition: 80 - 100% Battery voltage: 48V Battery capacity: 750Ah Battery type: PzS Year of battery manufacture: 2020 Battery condition: 60 - 80% Description: Workshop inspected with UVV certification Clamp fork, side shifter, fork positioner Attachment with shorter/longer forks can be changed as required Lodpfx Aoxl H Ngob Usah 3rd valve, 4th valve, rear work light, front work light, roof cover, CE certificate, BlueSpot rear, side safety guards right

Year of construction: 2017, condition: used, New: No Empty weight: 5 kg Part suitable for: trucks Type number: 7484544810 Ljdpfx Absxhu E Us Uoah T Occ standverwarming Air Top Evo 2000 Renault OEM : 7484544810 Article nr.: B523008008-veiling Used parking heater Air Top Evo 2000 Renault

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 6,431 h, load capacity: 5,000 kg, lifting height: 3,750 mm, free lift: 150 mm, fuel type: diesel, mast type: standard, construction height: 2,770 mm, fork carriage width: 1,350 mm, fork length: 1,700 mm, drive type: Diesel, construction width: 1,350 mm, Diesel Forklift Load Centre: 600 ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast Type: Standard Transmission: Double Pedal Speed Class: 20 Condition: Refurbished without warranty Technical Condition: Good Front Tyres Type: Superelastic Front Tyres Size: 300-15 NEW Front Tyres Condition: 80 - 100% Rear Tyres Type: Superelastic Rear Tyres Size: 250-15 NEW Rear Tyres Condition: 80 - 100% Description: Handover with new FEM 4.004 inspection including inspection certificate / new maintenance. For further questions, please feel free to call us. In addition to this model, we have around 150 other industrial trucks in stock. Visit our homepage fleischmann-foerdertechnik. We are happy to provide leasing & financing offers as well as delivery at attractive rates upon request. We also accept trade-ins of Linde equipment – even if you do not purchase a machine from us. Lajdpfjxlltwsx Ab Uoh The operating hours displayed have been read at the time of listing. Subject to prior sale, modifications, and errors. Sideshifter, Fork Positioner, Durwen Fork Positioner with Sideshift 3rd Valve, 4th Valve, Rear Working Lights, Front Working Lights, Heater, Soot Filter, Road-legal (StVZO), Full Cabin, Air Conditioning, Safety Light, Rotating Beacon, Monopedal, Seat Heating, LED, Comfort seat with fabric upholstery, air suspension, and seat heating, Flashing Beacon, Split Door, Pre-dust Separator

Condition: good (used), Year of construction: 2006, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 50,000 m/min, rapid traverse Y-axis: 50,000 m/min, rapid traverse Z-axis: 50,000 m/min, table width: 380 mm, table length: 500 mm, table load: 200 kg, mount diameter: 30 mm, Measuring probe TS640 Tank 600 L with 40 Bar IKZ Extended chip conveyor for 30/60 Tools ATC Direct measuring scales also in B & C Axis Air true spindle over M-Function Laedpfow Rl Igsx Ab Ush X - Travel: 500mm Y - Travel: 450mm Z - Travel: 400mm A - Axis: 360° B - Axis: 0 - 108° Table Length: 500mm Table Width: 380mm Table load: 200 Feed rate X-Axis: 50000mm/min. Feed rate Y-Axis: 50000mm/min. Feed rate Z-Axis: 50000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 35kW Speeds / ranges: 18000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 3+2 Chip conveyor: yes Coolantsystem: yes Length: 3800mm Width: 3200mm Height: 2800mm Weight: 6500kg

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, SEMI-AUTOMATIC CIRCULAR SAW MEP TIGER 352 SX EVO - Blade rotation at 4 speeds (15/30/45/90 rpm) - Rotating table mounted on central spindle and axial bearing Lsdpfx Aexdr Rtsb Usah - Cutting head feed on double linear guideway - Mechanical stops at -45°, 0°, +45°, and +60° with locking device at any angle - User interface with display

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 2,500 kg, mast type: standard, fork carriage width: 525 mm, fork length: 1,150 mm, drive type: Handbetrieb, Hand pallet truck Lsdpfxoxdqqle Ab Uoah Mast type: Standard Technical condition: New Steering wheel: Rubber; Load rollers: Polyurethane; Tandem; Colour: Green; Version: EVO, manual drive and lifting, entry/exit rollers, 3D steel tiller, proportional lowering valve

Condition: good (used), Rehsler TAE EVO 602 Air-Cooled Chiller The Rehsler TAE EVO 602 is an air-cooled compact chiller from M.T.A. S.p.A., designed for outdoor use and equipped with an integrated buffer tank and pump. These units are intended as "fully equipped" solutions, allowing for quick installation and commissioning, as they combine all the necessary cooling components in a single housing. Key Features: Air-cooled: Suitable for outdoor installation. Compact solution: Includes an integrated buffer tank and circulation pump, enabling plug-and-play installation. Versatile Application: Designed for various cooling processes in a wide variety of applications. Fast Installation: Due to the integration of internal components and the possibility of quick assembly. Manufacturer: Rehsler Cooling Systems Model: TAE EVO 602 Voltage: 400 V Rated power: 61 kW Current consumption: 104 A Protection class: IP54 Max. Operating pressure: 6 bar Tank capacity: 500 liters Lodpfoxgqzpox Ab Uoah Refrigerant: R407C / 2 x 14.5 kg Condenser: Air-cooled Rated compressor power: 4 kW P3 pump Water flow: 22.3/48 m³/h Power: 4 kW Centrifugal fan Total air flow: 420 Pa Total air flow: 40,000 m³/h Screw fan Total air flow: 42,000 m³/h Dimensions: Length (mm) 3,294, Width (mm) 1,255, Height (mm) 2,140 Weight: 1,345 kg Find more items - new and used - in our shop! International shipping costs upon request!

Condition: new, cutting diameter 280 mm capacity 90 degrees: flat 380 x 260 mm capacity 90 degrees: square 260 x 260 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3440 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Electro-hydraulic, semi-automatic band saw with additional manual and semi-automatic-dynamic function, for cuts from 45° right to 60° left. Some features: Lodpfx Ajfg E Iaob Uoah Pivoting control panel on vertical post. 420 mm large rotary table on roller bearings with preloaded thrust bearing and replaceable steel inserts. Double belt speed (40/80 m/min.)

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 4,830 h, load capacity: 1,800 kg, lifting height: 4,625 mm, free lift: 1,524 mm, fuel type: electric, mast type: triplex, construction height: 2,121 mm, fork carriage width: 1,040 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift Load center: 500 mm ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Double pedal Condition: Refurbished, without warranty Technical condition: Good Front tire type: Non-marking Front tire size: 200/50-10 Front tire condition: 60 - 80% Rear tire type: Non-marking Rear tire size: 140/55-9 Rear tire condition: 60 - 80% Battery voltage: 48V Battery capacity: 625Ah Battery manufacturer: Midac Battery type: PzS Ledpfx Aoxlltqsb Ujah Battery year of manufacture: 2016 Battery condition: 60 - 80% Description: Handover with new FEM 4004 inspection including inspection book. For further questions, feel free to call us. In addition to this model, we have approx. 150 other industrial trucks in stock. Visit our website, fleischmann-foerdertechnik. We are happy to arrange leasing & financing as well as delivery at attractive conditions. Trade-in of Linde equipment is also possible—even if you do not purchase a machine from us. Operating hours stated were recorded at the time of listing. Subject to prior sale, changes, and errors. Sideshift, Hydraulic sideshift pre-installed, 4th valve to carriage 3rd valve, 4th valve, rear working light, front working light, half cab, full free lift, safety light, seat heating,

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 2,500 kg, mast type: standard, fork carriage width: 525 mm, fork length: 1,150 mm, drive type: Handbetrieb, Hand pallet truck Mast type: Standard Technical condition: New Ljdpfx Aexdqqfeb Ujah Steering wheel: Rubber; Load rollers: Polyurethane; Tandem; Colour: Green; Version: EVO, manual drive and lifting, entry/exit rollers, 3D steel tiller, proportional lowering valve

Condition: new, cutting diameter 330 mm Lsdefg E Ibjpfx Ab Uoah capacity 90 degrees: flat 510 x 320 mm capacity 90 degrees: square 320 x 320 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3440 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Semi-automatic, electro-hydraulic band saw machine for cutting 60° left to 60° right. Versatile machine with a tape of 4640 x 34 x 1.1 mm for the Cutting pipes, profiles and beams up to a maximum cutting range from 510x320 mm to 0°. The control console on a swiveling arm allows for comfortable and safe operation from any position. Electronic inverter for continuous belt speed regulation from 15 to 100 m/min. Large turntable with a diameter of 280 mm and engraved exact fine scaling, easily adjustable and stored.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 4,233 h, load capacity: 1,600 kg, lifting height: 4,625 mm, free lift: 1,519 mm, fuel type: electric, mast type: triplex, construction height: 2,121 mm, fork carriage width: 980 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift Load center: 500 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Double pedal Condition: Refurbished without warranty Technical condition: Good Front tire type: Non-marking Front tire size: 18x7-8 Front tire condition: New Rear tire type: Non-marking Rear tire size: 140/55-9 Rear tire condition: New Battery voltage: 48V Battery capacity: 625Ah Battery manufacturer: GBD Lodsxlltkjpfx Ab Ueah Battery type: PzS Battery year: 2019 Battery condition: 60 - 80% Description: Delivery with new FEM 4.004 inspection including inspection booklet Side shifter, Integrated side shifter, 4th valve to fork carriage 3rd valve, 4th valve, rear work light, front work light, half cab, full free lift, safety light, non-marking tires, seat heating, LED, Linde Safety Pilot active, front & rear camera, comfort PVC seat with seat heating,

Condition: new, saw blade diameter 370 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 110 mm 180 x 100 mm Working height 925 mm saw blade turning speeds 15 - 150 U/min total power requirement 5,5 kW weight of the machine ca. 0,615 t dimensions of the machine ca. 1,4 x 1,4 x 2,0 m Electro-pneumatic - semi-automatic vertical circular saw with micro Lodpsfg Rldofx Ab Usah Processor control for miter cuts from 60° left to 45° right. Basic equipment: •Saw head slides on recirculating ball linear double guides •Three-stage gearbox •continuously variable speeds 15-150 rpm •Vice opening 190 mm • Stroke of the saw head can be programmed directly from the control panel for adjustment to the cutting material •Pneumatic vertical vice •Saw blade HSS DMO 5 Æ 370x32x3 for solid and profile material •Vise with counter-clamping device for double workpiece clamping •Base with removable coolant tray •Chip clearing brush •Length stop for cuts of the same length •Material support arm, at the same time connection option for roller conveyor/ loading side

Condition: used, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180 x 70 mm Ljdpjfc T Ugefx Ab Ueah capacity 45 degrees: round 120 mm capacity 45 degrees: square 100 mm capacity 45 degrees: square 135 x 60 mm saw blade turning speeds 1700 / 3400 U/min total power requirement 1,5/2,2 kW weight of the machine ca. 0,285 t dimensions 1,2 x 1,4 x 1,4 m Semi-automatic circular saw for sawing solid and aluminum Hollow iron materials and light metal alloys with electro-welded Carbide toothed washer. Machine for miter cuts from 45° right to 45° left. Through the Alignment along the vertical is possible Sawing operations with the head inclined between 0° and 45° to the left.

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm turning speed range: 36 / 72 m/min Laodpofg E H Rofx Ab Ueh dimensions of saw-band 2950 x 25,4 x 0,9 mm weight of the machine ca. 0,4 t Dimensions (LxWxH) 1,5 x 0,9 x 1,5 Semi-automatic function: Vice closes and motor starts, saw head lowers for the cut, motor switches off, saw head rises, Vise opens. Some features: New centralized switch console on an articulated arm. Latest generation hydraulic control unit, highly powerful and with low energy consumption. Base frame with pull-out coolant container. The machine complies in all areas CE regulations!

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15+30+45+90 U/min total power requirement 1,8/2,5 kW weight of the machine ca. 0,41 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Electro-pneumatic - semi-automatic vertical circular saw with micro Processor control for miter cuts from 60° left to 45° right. With Linear guide of the saw head. •new system with head sliding vertically on linear guides Upstream slide rails with recirculating balls. •Double gear set for high transmission performance •4 speeds 15/30/45/90 rpm •Vice opening 190 mm • Stroke of the saw head can be programmed directly from the control panel for adjustment to the cutting material •Pneumatic vertical vice •Saw blade HSS DMO 5 Æ 350x32x2.5 for solid and profile material •Vise with counter-clamping device for double workpiece clamping •Base with removable coolant tray •Chip clearing brush Laodpfx Aofg Rlbsb Uoh •Length stop for cuts of the same length •Material support arm, at the same time connection option for roller conveyor/ loading side •Turntable with additional central axis

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm vice 285 mm turning speed range: 36/72 m/min dimensions of saw-band 2950x27x0,9 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 485 kg dimensions of the machine ca. 1700 x 1000 x 1800 mm Electro-hydraulic semi-automatic band saw SHARK 282 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts – Saw head lowers for the cut – Motor switches off – Saw head rises – Vise opens. Semi-automatic dynamic system (manual lowering of the saw band bow up to to the desired position and cycle start via the manual button.) Some features: New centralized control console on an articulated arm to allow the operator can be easily switched from any working position. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Large work surface with turntable on roller bearings, measuring 265 mm preloaded thrust bearing, mounted. Double belt speed (36/72 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base frame with pull-out coolant tray. Electric coolant pump for cooling and lubricating the saw band. Preparation for installing the minimum blade lubrication kit (Optional), in addition to the conventional standard lubrication Emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language. Lajdpfx Asfg E H Sjb Ush

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180x70 mm capacity 45 degrees: round 120/110 mm capacity 45 degrees: square 10/95 mm capacity 45 degrees: flat 135x60 mm engine 2,5 0 1700 / 3400 U/min weight of the machine ca. 600 kg dimensions 2,0 x 1,5 x 1,7 m COBRA 352 NC 5.0, automatic circular saw with semi-automatic function, for Laedpfxjfg Rlgs Ab Ush sawing of aluminum and light metal alloys for the use of HM circular saw blades. Machine for miter cuts from 45° right to 45° left. Through the Alignment along the vertical is possible Sawing operations with the head inclined between 0° and 45° to the left. Numerically controlled circular saw machines with the new one specially designed by MEP for Automatic machines developed, Windows “CE” based control

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3320 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Electro-hydraulic semi-automatic band saw SHARK 332 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Some features: New centralized switch console on an articulated arm. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Turntable (on roller bearings of 420 mm with preloaded thrust bearings assembled). Double belt speed (40/80 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Ledpfxsfg E H Uo Ab Usah Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base designed to completely contain the coolant, even with maximum angle cuts. The coolant pan (provided with an electric pump for lubrication and Cooling of the saw band) and the chip drawer (can be replaced by a Chip conveyor to be replaced - see special accessories) are in the base frame built-in. Preparation for installing the minimum blade lubrication kit (Optional, in addition to the conventional standard lubrication with emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Adjustable length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.