Used Engel for sale (226)

Year of construction: 2010, condition: good (used), Screw: 120 mm Hjdpfx Asnvtx Ejfijfn I= 3587 mm RSP = 3787 mm Engel screw

Year of construction: 2003, condition: ready for operation (used), Clamping force: 275t, injection weight: 455g, cylinder diameter: 55mm, max. opening distance: 850mm, weight: 20t, operational hours counter: ca. 63,000h, including documentation, a set of new pumps and Handling GEIGER LR 16 EC, the handling needs overhauling. Hedjiiv Aqopfx Afiefn

Condition: good (used), Year of construction: 2002, Engel ES200/45VTHL-PRO-ELAST (2002) Clamping force: 45 t Hfsdpsvy Anxefx Afijn Type: Vertical Drive: Hydraulic

Year of construction: 2017, condition: ready for operation (used), Clamping force: 7000kN, screw diameter: 40mm, screw speed: 300/min, metering stroke: 200mm, controls: Engel CC300, weight: 22t, operating hours: 3871h, with electric 6-station turntable, electric quick adjustment machine clamping platen moving side, two injection units, 2x 3-zone screw D45mm, 32 hot runner control zones, electric plasticising units and documentation. Hjdpfjk N Dndex Afiefn

Condition: good (used), Year of construction: 2004, Engel INSERT 200H/40 Control: CC100 Condition: fully funtional Clamping force: 400 kN Opening stroke: 300 mm Ejector force: 20 kN Ejector travel: 100 mm Opening max. : 570 Opening min. : 270 Platen size: 590x340 mm Screw: 25 mm Screw length: 140 mm Injection volume: 69 cm3 Hfedpfetrhv Sjx Afisn Injection pressure: 2090 bar Weight: 5400 kg Pump drive power: 15 kW

Year of construction: 2014, condition: ready for operation (used), Clamping force: 1600kN, weight: 9t, operational hours counter: 3638h, with Handling Robot ENGEL viper 20. Hodpfxjh Nypfj Afiofn

Condition: excellent (used), Year of construction: 2010, Clamping force: 3200 t Tie bar distance: 2240x1800 mm Mould height min/max: 600-2000mm Platen size HxV: 3020x2680mm Max mould weight: 81000kg Screw dia: 215mm Injection volume: 38120 cm3 Hfsdju N Tg Uspfx Afijn For more information contact us.

Year of construction: 1998, condition: ready for operation (used), Two injection molding machines are available. 1) Battenfeld BA 2700/1200 BK, year of manufacture: 1998, clamping force: 2700kN, platen dimensions X/Y: 900mm/1020mm, tie bar distance X/Y: 630mm/630mm, opening stroke: 550mm, mold height min./max.: 250mm/620mm, max. platen distance: 1170mm, ejector stroke: 160mm. Screw diameter: 55mm, L/D ratio: 22, injection pressure: 1305bar, stroke volume: 913cm³, injection weight: 830g. Machine dimensions X/Y/Z: approx. 6800mm/1900mm/3400mm, weight: approx. 12000kg, control: Unilog 4000, operating hours: approx. 40759h. The machine exhibits faults when switching over. 2) Engel ES 200/45 HLS, year of construction: 1998, clamping force: 45t, platen dimensions X/Y: 550mm/430mm, min. installation height: 180mm, platen distance: 530mm, opening stroke: 350mm, ejector stroke: 100mm. Screw diameter: 25mm, stroke volume: 99cm³, injection pressure: 1400bar, L/D ratio: 20, screw stroke: 140mm. Machine dimensions X/Y/Z: approx. 3300mm/1200mm/1800mm, weight: approx. 3300kg, operating hours: 74165h. The machine has slight leaks in the hydraulics. Documentation available. On-site inspection is possible. Individual sale possible. Hodpfx Asv Sufasfijfn

Condition: like new (used), Year of construction: 2021, Engel VC320/80 fast track (2021) Tie bar less machine CC300 controll Clamping force: 80 t Screw diameter: 35 mm Shot volume: 144 cm3 Type: Horizontal Drive: Hydraulic Hfodpfjwzzw Tox Afien Machine has only 2000 hours!

Year of construction: 2005, condition: ready for operation (used), A total of four Engel injection molding machines are available. 1) Engel ES 80/25 HL-V, year of manufacture: 1999, the machine is a defective spare parts carrier. 2) Engel ES 80/25 HL-V, year of manufacture: 2001. 3) Engel VC 200/45 Tech, year of manufacture: 2004. 4) Engel e-Motion 200/55, year of manufacture: 2005. Documentation available. On-site inspection is possible. Individual sale possible. Hodpfx Afev Extzeiofn

Condition: good (used), Year of construction: 2014, Engel VIPER 20 linear robot \+ console Hedpowrzg Asfx Afisfn

Year of construction: 2009, condition: ready for operation (used), There are 5 identical Engel injection molding machines available. Screw diameter: 2x 30mm/3x 35mm, clamping force: 80t, weight: approx. 4400kg. All machines including attachment crane. One Engel (Fig. 5) serves as a spare parts dispenser for the remaining 4 machines. Documentation available. On-site inspection is possible. Hodou Afz Depfx Afijfn

Condition: used, Year of construction: 2007, clamping force: 600 kN, Engel VICTORY 330/60 Tech (2007) Closure system: Hydraulic Closure force: 600 kN Tiebarless Mold height: 600 mm Opening stroke: 900 mm Hfjdpfx Afowurcyoisn Ejector stroke: 115 mm Ejector force: 125 kN Injection system Screw diameter: 35 mm Injection volume: 154 cm³ Injection pressure: 2,400 bar

Year of construction: 2019, condition: ready for operation (used), Screw diameter: 30mm, clamping force: 50t, heating output: 11kW, weight: 2.9t, with documentation, an inspection is possible. Hfsdpfork Rxqsx Afijn

Condition: good (used), Year of construction: 2010, clamping force: 500 kN, Engel victory 200/50 spex (2010) CC200 Clamping force: 50 t Hfedpfx Aswv Ukiefijn Screw diameter: 35 mm Type: Horizontal Drive: Hydraulic Hours: 56000

Year of construction: 1993, condition: ready for operation (used), A total of six old injection molding machines with various accessories from Arburg and Engel are available. 1) Engel ES80/35, year of manufacture: 1992, clamping force: 350kN, injection pressure: 1500bar, injection weight: 35g/hp, screw diameter: 22mm, centering bore: 110mm, mold opening stroke: 330mm, control: defective. 2) Arburg 305 ECO 700-230, year of manufacture: 1989, clamping force: 700kN, screw diameter: 40mm, centering bore: 125mm, mold height min./max.: 190mm/420mm, tie bar distance X/Y: 305mm/135mm, mold opening stroke: 250mm, control: defective. 3) Arburg 305-210-700, year of manufacture: 1982, clamping force: 700kN, injection pressure: 1500bar, injection weight: 117g/hp, screw diameter: 35mm, centering bore: 125mm, mould height min./max.: 200mm/400mm, tie bar distance: 305mm. 4) Arburg 221-75-350, year of construction: 1992, clamping force: 350kN, injection pressure: 1500bar, screw diameter: 22mm, centering bore: 110mm, mould height min./max.: 150mm/300mm, tie bar distance: 221mm. 5) Arburg 221-55-250, year of construction: 1991, clamping force: 250kN, injection weight: 32g/hp, screw diameter: 20mm, mold height min./max.: 150mm/300mm, tie bar distance: 320mm. 6) 2K injection molding machine Arburg 221-75-350, year of construction: 1993, clamping force: 350kN, injection pressure: 1500bar, injection weight: 38g/hp, screw diameter: 22mm, mold height min./max.: 150mm/300mm, tie bar distance: 221mm. Including 7-8 Arburg dryers, various injection units, compressor AirComp, mixing unit liquid-silicone with Arburg control and Scheugen plow. Documentation available. An on-site inspection is possible. Hsdpfx Aovb Hbfjfiofn

Condition: good (used), Year of construction: 2009, CC200 control Clamping force: 180 t Between bars: 520x520 Min/Max mold height: 250-600mm Screw diameter: 45mm Maximum injection: 210g Hfsdpfev D D N Ejx Afijn

Condition: excellent (used), Year of construction: 2019, ENGEL Victory 120 Injection Moulding Machine – Tie-Bar Less Machine parameters Model: ENGEL VC 500/120 Clamping Force: 120 tons Control System: ENGEL CC300 Technology: Tie-bar-less design (VC – Victory series) Screw Type: S8 Screw Diameter: 40 mm L/D Ratio: 20 Drive System: Hydraulic with ECODRIVE SHV1 Hfjdpfewq Splox Afion Additional Equipment: Plate Platen size HxV: 740x680mm Min Mould height: 300 mm Maximum distance between platens: 800mm Working hour: 12187 Key Features: 1. Modern tie-bar-less concept for flexible mould area access 2. High energy efficiency due to ECODRIVE technology 3. Precise control with ENGEL CC300 system 4. Robust hydraulic unit designed for demanding cycles Applications: 1. Plastic injection moulding for small to medium-size parts 2. Suitable for various materials depending on configuration

Condition: good (used), Year of construction: 2001, ENGEL ES 80/25 HL-V Clamping force: 25 ton Hedpfx Aou Ed Stjfisfn Plate dimensions: 470x280mm Controll : CC100 Year : 2001 Serial nr. 45277 Screw: 22 mm Injection volume: 38cm3 Shot weight: 34.6g/PS +Picker Engel included Weight: 1800kg

Condition: excellent (used), Year of construction: 2013, Clamping force: 380 t Screw diameter: 90 mm Hfjdpfx Afowv U A Eoien Shot volume: 1781 cm3 Type: Horizontal Drive: Hydraulic

Condition: good (used), Year of construction: 2015, Technical Datasheet – ENGEL DUO 7050/1500 WP 🔩 Clamping Unit: 1. Clamping force: 15,000 kN 2. Opening force (with pressure cushion): 1,000 kN 3. Opening force (without cushion): 476 kN 4. Opening stroke: 2,550 mm 5. Mold height (min – max): 700 – 1,360 mm 6. Max. daylight (platens open): 3,250 mm 7. Platen dimensions (H × V): 2,420 × 2,170 mm 8. Tie bar spacing (H × V): 1,865 × 1,430 mm 9. Tie bar diameter: 250 mm 10. Max. mold weight: 45,000 kg (2/3 on moving platen) 11. Ejector stroke: 300 mm 12. Ejector force: 230 kN 13. Dry cycle time (Euromap 6): 4.8 s 14. Dry cycle stroke: 1,300 mm 🧩 Injection Unit: 1. Screw diameter: 105 mm 2. Screw stroke: 480 mm 3. Injection volume: 4,160 cm³ 4. Screw speed (max): 130 rpm (up to 150 rpm with performance adjustment) 5. L/D ratio (3-zone screw): 22 6. Plasticizing rate (3-zone screw): 113 g/s (max. 130 g/s) 7. Plasticizing rate (barrier screw): 148 g/s (max. 171 g/s) 8. Injection speed: 800 cm³/s (630 cm³/s at higher pressure) 9. Injection pressure (standard/boost): 1,650 / 2,090 bar 10. Nozzle stroke: 950 mm 11. Nozzle contact force: 150 kN ⚙️ Drive & Energy: 1. Installed power (injection unit): 74 kW 2. Heating zones (incl. nozzle): 7 Hedjwfgi Ajpfx Afijfn 3. Pump drive power: 161 kW 4. Oil tank volume: 1,800 liters ⚖️ Machine Weight: 1. Clamping + Injection Unit: 66 tons 2. Approx. additional components: 17 tons

Condition: excellent (used), Year of construction: 2010, Weight 52 kg Picker from IMM Engel Victory 80/50 Spex Hfodpfxju A Ticj Afijn

Condition: good (used), Year of construction: 2003, Clamping force: 500 t Screw diameter: 90 mm Type: Horizontal Drive: Hydraulic Makes: Engel. Model: CL4550/500 . Age: 2003 Registered hours: 72000 Clamping system : Knee Lever system. Clamp Force : 500 tonnes. Hfsdpfsuxdmkjx Afisn Screw diameter : 90 mm. Maximum injection volume : 2280 cubic centimeters. Plastification rate: 50 grams PS/Sec. Injection pressure : 1916 Bar. Mould height : minimum 250-850 mm. Opening stroke: 700 mm Daylight : maximum 1550 mm. Mounting Platen size 1210x1210 mm (Hor x Ver). Distance between coloms 840x840 mm Ejector stroke : 250 mm. Extras: Core pulling 3. -Robot : Engel ERC, thermounits, outfeed conveyor.

Condition: good (used), Year of construction: 2004, ENGEL DUO 4550/700 – Technical Specification General Information: Machine designation: DUO 4550/700 Controll : CC100 Clamping Unit: Clamping force: 7000 kN Hodpfxjv U Dn Ns Afijfn Opening force (with pressure pads): 510 kN Opening stroke: 1350 mm Minimum mould height: 450 mm Maximum mould height: 1350 mm Daylight (platens open): 2700 mm Platen dimensions (H × V): 1460 × 1360 mm Tie bar distance (H × V): 1030 × 930 mm Max. mould weight: 9000 kg Ejector stroke: 300 mm Ejector force: 90 kN Ejector strokes (Euromap 6): 8 Dry cycle time (Euromap 6): 7.0 seconds Injection Unit: Screw diameter: 90 mm L/D ratio (barrier): 24 Plasticizing rate: 2488 cm³/s Shot volume: 2860 cm³ Shot weight (theoretical): 2600 g Injection flow rate: 533 cm³/s Injection pressure: 1910 bar Specific injection pressure: 2100 bar Nozzle length: 185 mm Nozzle contact force: 65 kN Heater capacity (zone 7): 62 kW Pump drive power: 75 kW Oil capacity: 1000 liters Weight: Net weight of clamping unit: 22 tons Net weight of injection unit: 10 tons Cores: 2+2 Linear Robot Engel ERC

Condition: used, Year of construction: 2013, 1. Clamping Force: 60 tons (600 kN) 2. Injection Unit Orientation: Vertical Hfodpfx Aswp E Hzefisn 3. Rotary Table: Included 4. Screw Diameter: 25 mm 5. Shot Size: Around 4.4 oz (125 g) 6. Injection Pressure: Up to 210 bar 7. Injection Speed: Approximately 139 mm/s 8. Mould Opening Stroke: 305 mm 9. Ejector Stroke: 106 mm