Engel ES 1050/200 HL (1997)

Engel ES 1050/200 HL

Condition: good (used), Year of construction: 1997, _Engel ES 1050/200 HL_ Dcedpfxeztadgo Aiiep Clamping force: 200 t Year of manufacture: 1998 Control system: CC 100 Screw diameter: 45 mm Screw type: GF Min. mold height: 250 mm Max. opening stroke: 700 mm Max. platen distance: 950 mm Ejector stroke: 150 mm Tie-bar spacing (H × V): 820 × 750 mm Platen size: 500 × 570 mm Quick clamp: Yes Extras: Software gate separation

Condition: ready for operation (used), Year of construction: 2013, operating hours: 60,244 h, clamping force: 6,500 kN, screw diameter: 105 mm, total width: 2,300 mm, total height: 2,700 mm, overall weight: 20,000 kg, product length (max.): 8,000 mm, This Engel DUO 7050/650 pico was manufactured in 2013. It features a clamping force of 6500 kN, a maximum injection volume of 4160 cm³, and a screw diameter of 105 mm. The machine includes a robot interface (Euromap 67) and is still in production with excellent condition. If you are looking to get high-quality injection molding capabilities, consider the Engel DUO 7050/650 pico machine we have for sale. Contact us for more information about this machine. • Maximum injection volume: 4160 cm³ • Minimum mold height: 450 mm • Maximum mold height: 950 mm • Platen opening stroke: 1400 mm • Platen dimensions (W × L): 1510 × 1440 mm • Tie-bar distance: 1100 × 960 mm • Motor power: 161 kW • Heater power: 73.9 kW • Number of electrical connection pins: 32 • Injection nozzle radius (at tip): R35 Dcodpfx Aijx Nr R Heiep • Centering ring diameter: 200 mm • Number of cores: 0 • Number of heating zones: 0 • Year of manufacture: 2013 • Operating hours: approx. 60,244 h • Condition: Excellent • Status: In production Additional equipment • Equipped with robot: Yes • Robot interface: Euromap 67

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: X82600, clamping force: 12,000 kN, screw diameter: 150 mm, clearance between the columns: 1,200 mm, displacement volume: 12,193 cm³, injection pressure: 1,500 bar, injection weight: 11,584 g, opening stroke: 1,400 mm, Used Stork IMM 12000-19000 injection molding machine. Dcedpewhkfyjfx Aiijp

Condition: ready for operation (used), Year of construction: 1998, operating hours: 29,598 h, clamping force: 5,500 kN, screw diameter: 80 mm, total height: 2,230 mm, overall weight: 20,000 kg, product length (max.): 8,840 mm, This Engel Duo 3550/550 Tech was manufactured in 1998. It features a clamping force of 5500 kN, a maximum injection volume of 1960 cm³, and a screw diameter of 80 mm. The machine dimensions are 8840 x 2520 x 2230 mm, and it weighs 20,000 kg. If you are looking to get high-quality injection moulding capabilities, consider the Engel Duo 3550/550 Tech machine we have for sale. Contact us for more information. • Maximum injection volume: 1,960 cm³ • Minimum mould height: 310 mm • Maximum mould height: 800 mm • Platen opening stroke: 850 mm • Platen dimensions (W x L): 1,345 x 1,280 mm • Tie-bar distance (H x V): 915 x 860 mm • Motor power: 55 kW • Heater power: 47.5 kW • Injection nozzle radius (at tip): R35 • Centering ring diameter: 200 mm • Number of cores: 0 • Number of heating zones: 0 • Operating hours: 29,598 h • Condition: Excellent Dcsdpfxsx Nr H Io Aiiep Additional equipment • Robot: Not equipped • Robot interface: None • Other accessories: None reported

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: X66924, clamping force: 6,600 kN, screw diameter: 115 mm, clearance between the columns: 1,000 mm, displacement volume: 5,349 cm³, injection pressure: 1,800 bar, injection weight: 5,082 g, opening stroke: 1,200 mm, Used Stork IMM 6600EP-8650 injection molding machine. The machine has been overhauled, tested and repaired. Dcodpfx Aswhk Iujiiep

Condition: ready for operation (used), Year of construction: 2001, operating hours: 54,319 h, clamping force: 16,000 kN, screw diameter: 135 mm, injection weight: 7,450 g, This 3-axis Krauss Maffei 1600-17200MC hydraulic injection moulding machine was manufactured in 2001. It features a clamping force of 16,000 kN and a screw diameter of 125 mm. The machine has a maximum shot weight of 7450 g and a platen size of 2600 x 2110 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 1600-17200MC machine we have for sale. Contact us for further details. • Injection unit: 17200 • Distance between tie bars (h × v): 1600 × 1250 mm • Platen size (h × v): 2600 × 2110 mm Dsdpfx Aisyyyr Teiocp • Clear distance (x × y): 1800 × 1400 mm • Max. mold opening stroke: 2,500 mm • Mold installation height (min–max): 900–1,600 mm • Opening width: 3,400 mm • Mold opening force: 1,108 kN • Moving platen force: Opening 177 kN / Closing 153 kN • Ejector stroke: 300 mm • Ejector force (forward/backward): 415 / 177 kN • Operating voltage: 400 V / 50 Hz • Motor current: 446 A • Heating current: 164 A • Total pump operating hours: 75,125 h Additional equipment • Wittmann Robot System W650 (2001) • Hub Stroke X 1500; Y 2600; Z 3500 • Spare cylinder/screw set (1x) • Internal cooling system • Core pullers (2x)

Condition: ready for operation (used), Year of construction: 2003, clamping force: 8,000 kN, screw diameter: 90 mm, total width: 3,000 mm, total height: 2,500 mm, overall weight: 44,000 kg, product length (max.): 8,900 mm, Hydraulic injection moulding machine manufactured in 2003. This Engel DUO 5550/800 features a clamping force of approximately 800 tons and a screw diameter of about 90 mm. It has a shot volume of around 2700 cm³ and a maximum injection pressure of approximately 1900 bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel DUO 5550/800 machine we have for sale. Contact us for further details. • Shot volume: ~2700 cm³ • Max. injection pressure: ~1900 bar • Plasticizing capacity: ~77 g/s • Clamping unit: Two-platen design (no traditional toggle), larger mold space for easier changes, even clamping force distribution • Injection unit: Hydraulic, high-performance plasticizing; suitable for thick-walled or large-volume parts • Typical applications: Automotive components (e.g., bumpers, dashboard elements), large housings and covers, industrial parts, thick-walled technical components • Advantages: High clamping force for large parts, more compact than traditional tie-bar machines, stable industrial design, easy to automate Dcsdsy Alwmspfx Aiiop Additional equipment • Not specified/included in the provided information

Condition: excellent (used), Year of construction: 1999, Engel ES 7050/1000 K Clamping force: 1000 tons Year: 1999 Screw diameter: 105 mm Injection volume: 4160 cm³ Number of heating zones incl. nozzle: 7 Pump drive power: 130 kW Locking force: 1100 tons Opening stroke: 1100 mm Min-max mould height Dcedpfxoxvc Slj Aiisp Tie bar spacing: 1400x1150 mm Machine weight: 64 tons + 18 tons Plus Engel Robot Type: ERC 83/2 - CL Year: 1999 Separate control cabinet

Condition: ready for operation (used), Year of construction: 2006, operating hours: 30,000 h, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 95 mm, displacement volume: 3,367 cm³, Clamping force 8000 kN Mould opening force, max. 560 kN Travel force movable platen opening 89 kN Travel force movable platen closing 92 kN Size of mould platens (h x v) 1600 x 1550 mm Distance between tie bars (h x v) 1120 x 1000 mm Mould opening stroke 1600 mm Mould height min/max 500/1100 mm Max. daylight 2100 mm Hydraulic ejector - stroke 300 mm Ejector force 200/100 kN Injection unit: Screw diameter 95 mm Ls/D ratio 23 Injection pressure 1795 bar Stroke volume 3367 ccm Shot weight (PS) 3064 gr. Injection rate 690 ccm/s Screw speed 116 1/min Plasticising rate max. 104 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 53 kW Adjustable barrel heating zones 7 Oil Reservoir capacity 1500 ltr. Dimensions and weights: Dimensions of the machine ca. 11,00 x 3,00 x 2,60 m Total machine weight 44500 kg Max. mould weight 12200 kg Accessories: - Anti vibration pads Dedpfoymn Rvjx Aiiscp Additional Options: - 1 x air valve - tiebar pull system - 3 x core pulls on movable plate - 2 x core pulls on fix plate - 20 x hot runner controller - Robot interface according to Euromap 67

Condition: excellent (used), Year of construction: 1999, Engel ES 4450/600HL Clamping force 600 t Year of manufacture 1999 Screw diameter 90 mm PVC cylinder with additional screw For PP, PE, etc. Injection volume 2480 cm³ Dsdexxcyujpfx Aiiocp Clamping plate size (horiz./vert.): 1480x1300 mm Minimum mold installation height 500 mm