Used Emcomat 7 Technical Data for sale (56,990)

Condition: excellent (used), Year of construction: 2005, FOR SALE - Emcomat 17D Lathe Year 2005 Travel in X/Z 220 / 710 mm Distance between centers - 700 mm Distance above centers - 170 mm Max. speed - 3000 rpm Spindle nose - DIN 55029 Max. drive power - 5.3 kW Quill diameter 50 mm Djdpfx Aoxyzikjc Njcc Inner cone MT3 Quill travel 120 mm Dimensions (LxWxH) 1650 x 1060 x 1635 mm Machine weight 755 kg 3 & 4 Jaw Chuck

Condition: used, Year of construction: 1993, Technical details: height of printing: - height of printing: - connection electric: 100-240 V pneumatically operated: min./max.: 4,8/6,9 bar Dsdpfsu Nu Tpox Ac Nocc The printer is a lower case inkjet printer for contactless mark products. Application: for commercial marking and labeling purposes. The device can print on any surface, any structure, any profile and on any form. (according to the manufacturer) Equipped with two control units. other features: - dimension height: 3.3 - 8.6mm and 1/8 "- 1/3"; Points of reference: 62 digits; - operation is via control unit - equipment with control unit 170i and accessories Control unit 178i dimensions: - machine: L: 600 x W: 650 x H: 1800mm - control units: L: 203 x W: 508 x H: 610mm Sale as is. Without test run! i.D. *

Condition: excellent (used), Please read the technical specifications thoroughly. If you are considering the machine as an investment, we kindly request that, for an offer to be made, you provide full identification along with a correct phone number and email address. EMCO Precision Lathe EMCOMAT 17 D Including 3-axis EMCO digital display Year of manufacture: 2007 with CE marking Centre distance: 700 mm Centre height: 170 mm Dcodsxx S R Ajpfx Ac Njc Swing over bed Ø 340 mm Swing over cross slide Ø 190 mm Bed width: 260 mm Longitudinal slide travel: 600 mm Cross slide travel: 220 mm Top slide travel: 110 mm Cross slide length: 410 mm Cross slide width: 150 mm Carriage guide length: 380 mm Turning tool cross-section: 20 x 20 mm Distance from turning centre to top slide: 34 mm Top slide (compound) swivel range: 60 / 120° Main spindle: Spindle mounting: DIN 55029 (Camlock) Spindle bore: Ø 50 mm Internal taper to DIN 7178 1:22 Front bearing spindle diameter: Ø 70 mm Max. chuck diameter: Ø 200 mm Max. face plate diameter: Ø 200 mm Spindle speeds: 40 - 3000 rpm Stepless speed control Number of mechanical speed ranges: 4 Main drive: Power at 40% duty cycle: 5.3 kW Max. nominal torque at drive spindle: 640 Nm Feed: 20 (28) longitudinal feeds Z: 0.045 - 0.787 mm/rev 20 (28) cross feeds X: 0.023 - 0.406 mm/rev Threads: 20 (28) metric threads (standard) Pitch: 0.4 – 7.0 mm Tailstock: Quill diameter: Ø 50 mm Quill internal taper: MK 3 Quill stroke: 120 mm Offset: ±13 mm Permissible workpiece weights: (between centres) 50 kg, supported by tailstock 150 kg Weight: 755 kg Dimensions: 1650 x 1060 x 1635 mm The EMCOMAT 17 D is a precision lathe suitable for all areas of mechanical engineering and vocational training. Equipment: - EMCO 3-axis digital display with colour screen - Potentiometer, EMERGENCY STOP button, speed digital display on control panel next to digital display - 3-jaw chuck - MULTIFIX tool post head size B - Electrically interlocked chuck guard - Quick-collet clamping device - MICROJET coolant spray system - Chip guard (rear wall) - Machine lamp - Machine feet - Bed stop Condition: Very good, from a training facility "Due to its quality and price, this machine is not suitable for private individuals." Available from March 2026.

Condition: new, Machine according to DIN 8605: lathe with increased accuracy. Tip width: 700 mm Peak height: 170 mm Circulating diameter over bed: 340 mm Circulating diameter over flat slide: 190 mm Bed width: 260 mm Laengs schlitten: 600 mm Shifting path cross slide: 220 mm Shifting path upper slide: 110 mm Flat slide: 410 mm Flat slide width: 150 mm Guide load-length bed slide: 380 mm Rotary chisel cross-section: 20x20 mm Center of rotation distance - Upper slide: 34 mm Djdpodctnbsfx Ac Nscc Swing range upper slide (Support): 60/120° Main spindle: Spindle connection DIN 55029 (Camlock): S 5 Spindle bore: 50 mm Inner cone according to DIN 7178: 1:22 Spindle diameter in the front bearing: dia. 70 mm Max chuck diameter: 200 mm Max. washer diameter: 200 mm Spindle speeds: 40-3000 rpm Speed control: Stepless mechanical speed levels: 4 Main drive: Power at 40% ED: 5.3 kW Max rated torque a. d.Main spindle: 640 Nm Feed: 20 (28) Laengsvorschuebe Z: 0.045-0.787 mm/U 20 (28) Plan vorschuebe X: 0.023-0.406 mm/U Thread: 20 (28) metric thread (basic): 0.4 - 7.0 mm 32 inch thread (with option Raed replacement D3Z200): 56 - 4 Gg/inch 28 Module thread (with option Raed replacement D3Z200): 0.2 - 3.5 32 diam. Pitch thread (with option Raed replacement D3Z200): 112 - 8 Tailstock: Pinole diameter: 50 mm Indoor cone of the pinole: MK 3 Pinole stroke: 120 mm Side adjustment: x 13 mm Zulessige Werkstueckweights

Condition: excellent (used), functionality: fully functional, Emcomat 17D Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C New from Training Workshop Excellent Condition!!! Technical Data: >> Year of manufacture: approx. 2000 >> Machine no.: D3F H1 010 >> Centre height: 170 mm >> Swing over bed: 340 mm >> Swing over cross slide: 190 mm >> Turning length: 700 mm >> Spindle speed: 4 speed ranges, stepless from 35 to 3000 rpm >> Tailstock quill stroke: 120 mm >> Tailstock: MT3 >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 – 0.787 mm/rev >> 20 cross feeds: 0.023 – 0.406 mm/rev >> Required floor space approx. (L x D x H): 1.600 x 0.9 x 1.3 meters >> Weight: approx. 730 kg Dcsdpfxowvuf Te Ac Noc Equipment and Accessories: >> 3-axis digital readout from K&C, new, with 12 months manufacturer’s warranty and operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 piece three-jaw chuck NEW 160 mm, 2 sets of jaws >> Multifix B toolholder with 2 tool pockets >> Chip guard >> Coolant system About the machine: Offered here is an Emcomat 17D lead and feed screw lathe, approx. year 2000, in very good condition. The machine is of course fully functional. The bedways are in excellent condition. The Emco is equipped with a new 3-axis digital readout from K&C and a new three-jaw chuck. Take the opportunity to inspect the machine under power on site and see the condition for yourself.

Condition: used, Year of construction: 1999, Technical details: turning diameter over bed: 340 mm turning diameter over support: 190 mm turning length: 700 mm centre distance: 700 mm revolution per minute: 55 - 2350 / 8 step mechanisch U/min spindle bore of work spindle: 50 mm tailstock quill adjustment:: 120 mm tailstock quill: MK3 mm Dedsu Ixw Aspfx Ac Nscc max. torque on the spindle: 350 Nm max. workpiece weight -without tailstock: 50 kg total power requirement: 3,0 kVA weight of the machine ca.: 0,79 t dimension machine xH: 1,6 x 0,9 x 1,4 m Accessories: comparable in the picture 2x steady rest (1x closed and 1x open) various tips various lathe chucks and jaw pairs *

Condition: used, Year of construction: 2007, Technical details: Dcjdpox Apd Usfx Ac Njc turning diameter over bed: 340 mm turning diameter over slide rest: 190 mm turning length: 700 mm spindle turning speed range: 40 - 3000 U/min spindle bore: 50 mm

Condition: used, This listing is for the Agilent 34970a Data Loger Switch Unit The unit is in full working condition and is ready for immediate use Key Features: 3-slot mainframe: Supports up to 60 2-wire channels using plug-in modules. Built-in 6½-digit DMM (Digital Multimeter): Measures voltage, current, resistance, frequency, and temperature. Plug-in Modules Available: e.g. 34901A (20-channel multiplexer), 34902A (16-channel actuator), 34908A (40-channel single-ended multiplexer), etc. Interfaces: GPIB and RS-232 standard (USB via adapter). Logging Capabilities: Can log data over time for test/monitoring applications. Scan Rates: Up to 250 channels/sec depending on configuration. User Interface: Front-panel controls with LCD display. Remote control via SCPI commands. Typical Applications: Environmental monitoring (temperature, humidity) Functional test systems Data logging in labs Automotive and aerospace test setups Dodpfxjxhfcdj Ac Necc Industrial process monitoring

Condition: like new (used), Year of construction: 2019, operating hours: 720 h, functionality: fully functional, machine/vehicle number: D4D194801, turning diameter over cross slide: 190 mm, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, center height: 170 mm, spindle speed (max.): 3,000 rpm, The machine was used for training purposes and has only approximately 720 spindle hours. TECHNICAL DETAILS Center distance: 700 mm Center height: 170 mm Swing diameter over bed: 340 mm Swing diameter over cross slide: 190 mm Sliding movement of the longitudinal slide: 600 mm Sliding movement of the cross slide: 220 mm Sliding movement of the top slide: 110 mm Turning tool cross-section: 20 x 20 mm Drive motor power: 5.3 kW Main spindle Spindle nose: CAMLOCK DIN 55029 S5 Spindle bore: Ø 50 mm Maximum faceplate diameter: 200 mm Maximum chuck diameter: 200 mm Spindle speeds: 40 - 3,000 rpm Speed control: Continuously variable Speed settings: 4 Speed ranges: 40 - 130, 110 - 360, 310 - 1,070, 870 - 3,000 rpm Feed range Longitudinal feeds: 0.045 - 0.787 mm/rev Cross slide feeds: 0.023 - 0.406 mm/rev Thread cutting range Metric thread: 20 (0.4 - 7.0 mm) Tailstock Quill diameter: 50 mm Quill inner taper: MT 3 Quill stroke: 120 mm Lateral adjustment: ±13 mm Permissible workpiece weights Exposed: 50 kg With tailstock: 150 kg MACHINE DETAILS Spindle hours: approx. 720 h Dimensions (L x W x H): 1,650 x 1,060 x 1,635 mm Turning spindle above floor: 1,103 mm Total weight: 755 kg Power supply: 400 - 440 V Dcsdpfx Ajv Iqm Ssc Nec EQUIPMENT - 3-axis digital display - Continuously variable speed control - Röhm ZS Ø200 three-jaw chuck - 5 x B25/120 quick-change tool holders - Tool set - Fixed center MT 5 - Turning tool set with parting tool (3 x standard, 1 x parting)

Condition: like new (used), Year of construction: 2021, operating hours: 470 h, functionality: fully functional, machine/vehicle number: D4D210301, turning diameter over cross slide: 190 mm, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, center height: 170 mm, spindle speed (max.): 3,000 rpm, The machine was used for training purposes and has only approximately 460 spindle hours. TECHNICAL DETAILS Center distance: 700 mm Center height: 170 mm Swing over bed: 340 mm Swing over cross slide: 190 mm Sliding movement of the longitudinal slide: 600 mm Sliding movement of the cross slide: 220 mm Sliding movement of the top slide: 110 mm Turning tool cross-section: 20 x 20 mm Drive motor power: 5.3 kW Main spindle Spindle nose: CAMLOCK DIN 55029 S5 Spindle bore: Ø 50 mm Max. faceplate diameter: 200 mm Max. chuck diameter: 200 mm Spindle speeds: 40 - 3,000 rpm Speed control: Continuously variable Speed levels: 4 Speed ranges: 40 - 130, 110 - 360, 310 - 1,070, 870 - 3,000 rpm Feed range Longitudinal feeds: 0.045 - 0.787 mm/rev Cross slide feeds: 0.023 - 0.406 mm/rev Dsdpfx Aev Iqlzec Njcc Thread cutting range Metric thread: 20 (0.4 - 7.0 mm) Tailstock Quill diameter: 50 mm Quill inner taper: MT 3 Quill stroke: 120 mm Lateral adjustment: ±13 mm Permissible workpiece weights Exposed: 50 kg With tailstock: 150 kg MACHINE DETAILS Spindle hours: approx. 460 h Dimensions (L x W x H): 1,650 x 1,060 x 1,635 mm Turning spindle above floor: 1,103 mm Total weight: 755 kg Sound pressure level: 79 dB(A) Power supply: 400 - 440 V EQUIPMENT - 3-axis digital display - Continuously variable speed control - Röhm ZS Ø200 three-jaw chuck (soft jaws, internally and externally stepped) - 5 x B25/120 quick-change tool holders - Tool set - Fixed center MT 5 - Turning tool set (3 x standard, 1 x parting-off)

Condition: ready for operation (used), Dataram DR-717 32K x 17 card (Gildemeister) , serial no. according to photo ,used, normal signs of wear, 100% functional Djdpfxji D Un Rj Ac Necc

Condition: new, Technical Data • Manufacturer: Wilo (Made in Germany) • Type: TOP-Z 30/7 RG • Power supply: 3~ 230 V / 400 V, 50 Hz • Maximum medium temperature: 80°C • Operating pressure: PN10 • Connections: G 2” • Installation length: 180 mm • Protection class: IPX4D • Insulation class: H • Weight: approx. 6.0 kg ———— Condition • New, unused • Original packaging • Manufacturer's manual • Condition exactly as shown in the photos ———— Application • Domestic hot water circulation (DHW) • Potable water installations • Residential and industrial buildings Dcodpfx Aceyhhf Ns Njc

Condition: excellent (used), - Digital 3-axis position display. - Accessories included. Working Range Centre distance: 1000 mm Centre height: 200 mm Swing diameter over bed: 400 mm Swing diameter over cross slide: 250 mm Distance from top slide to turning centre: 40 mm Bed width: 260 mm Longitudinal slide travel: 900 mm Cross slide travel: 220 mm Top slide travel: 110 mm Bed carriage guide length: 380 mm Turning tool cross-section: 20 x 20 mm Spindle Spindle nose according to DIN 55 029 (Camlock): 5" Spindle bore: Ø 50 mm Internal taper according to 7178: 1:22 Max. faceplate diameter: Ø 260 mm Max. chuck diameter: Ø 200 mm Spindle speeds: 40 – 3000 rpm Speed control: stepless Mechanical speed ranges: 4 Drive Motor Three-phase AC motor with integrated brake Infinitely variable speed (frequency inverter) Power at 40% duty cycle: 5.3 kW Max. nominal torque at main spindle: 640 Nm Tailstock Quill diameter: Ø 50 mm Quill stroke: 120 mm Quill internal taper: MT 3 Machine Dimensions Overall length: 1950 mm Overall height: 1635 mm Dsdpow U Ac Nefx Ac Nocc Overall width: 1060 mm Spindle height above floor: 1133 mm Total machine weight: 865 kg

Condition: excellent (used), 3-Axis Positioner, 7 Ton Technical Data: - Maximum load capacity: 7,000 kg - Faceplate diameter: 1,100 mm - Speed: 0.03 - 1.0 rpm - Minimum table height in horizontal position: approx. 999 mm, maximum 2,218 mm - Minimum table height in tilted position to center: approx. 818 mm, maximum 1,673 mm - Motorized and tiltable/rotatable faceplate - Infinitely variable rotary motion (electric control) - Forward and reverse rotation - Welding current transmission: approx. 1,400 A - Maximum torque: 9,000 Nm - Tilting angle: 135° - Drive: 400 V Dsdpfxjxxw Rnj Ac Nscc - Power supply: 3 x 400 V - Handheld remote controller for rotation direction and tilting - Dimensions (L x W): approx. 2,620 x 1,490 mm - Weight: approx. 3,500 kg

Condition: ready for operation (used), Used pallet racking from Jungheinrich (Delta System) is a proven solution for efficient and safe warehouse storage. This heavy-duty racking is ideal for warehouses, industrial, and logistics operations seeking stable and durable racking systems for Euro pallets. The Delta system offers high load capacity, flexible configurations, and reliable performance in everyday operation. Buying used means: tested brand quality at an attractive price – immediately available from stock for new builds, conversions, or expansion of your racking system. Individually adaptable: The uprights (frame type 512 / 612) can be adjusted to your desired height – professionally and precisely in our workshop. We provide custom-fitted racking solutions for all storage requirements. PRODUCT DETAILS - Height: approx. 750 cm - Depth: approx. 105 cm - Length: approx. 1410 cm - Shelf load: 2,700 kg - Bay width: 270 cm (3 × EPAL) - Beams: approx. 270 × 13 × 5 cm - Beam colour: Orange - Frame type: 512 / 612, frame blue, galvanised/pre-assembled - Levels: floor + 3 - Pallet spaces: 60 incl. floor spaces - Version: Used Jungheinrich Delta - Availability: Available immediately from stock, multiple sets available SCOPE OF DELIVERY: - 6 × frames approx. 7.50 × 1.05 m, blue, pre-assembled - 30 × beams approx. 270 cm (approx. 270 × 13 × 5 cm) - 60 × safety pins Price: 1,140.00 € net 1,356.60 € gross You will receive an invoice with VAT shown separately. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery in Germany by our partner freight forwarder – shipping costs depending on postal code - Professional installation and dismantling by trained teams optionally available Dsdpoydkm Uofx Ac Nocc - Racking inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTING: Our planning department will be happy to provide a non-binding offer tailored to your requirements. Whether new installation, conversion, or expansion – we provide expert advice for your racking configuration. SHOWROOM: Visit our showroom! You can get a comprehensive overview of our pallet racks, storage racks, and additional solutions on site. Many systems are assembled and ready for hands-on viewing. Our experts are available to answer your questions and provide individual advice – we look forward to your visit! Still haven’t found the right solution? Visit our website for a quick overview of many offers and variations of our products! INTERESTED OR HAVE QUESTIONS? Simply contact us via message or phone call. You will find our phone number on our company page. ☎️ You can reach us by phone from Monday to Friday, 08:00 – 16:00. Alternatively, send us a message with your name and number, and we will get back to you as soon as possible.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Emcomat Emco EM20D Lead and Feed Lathe, built in 1995, in excellent condition, CE compliant! Technical specifications: >> Year of manufacture: 1995 >> Center height 200 mm >> Swing over bed 400 mm >> Swing over cross slide 250 mm >> Turning length: 1000 mm >> Spindle speed: 4 speed levels, continuously variable from 35-3000 rpm >> Quill stroke 120 mm >> Tailstock: MT3 >> Spindle bore: 50 mm >> 20 longitudinal feeds 0.045 / 0.787 mm/rev >> 20 cross feeds 0.023 / 0.406 mm/rev >> Space requirements / installation dimensions approx. length 1.900 x depth 0.9 x height 1.3 meters >> Weight approx. 850 kg Dodpfewag Stex Ac Nocc Accessories and equipment: >> 3-axis position indicator >> 1 piece Three-jaw chuck with 1 set of jaws >> Tool holder with 3 pockets >> Chip return wall >> Coolant system >> Bed stop About the machine: Offered is an Emcomat 20D centerline and feed spindle lathe, built in 1995, in lightly used condition. The machine is fully functional. All slides run very smoothly and evenly. The bed guides are in very good condition. Take advantage of the opportunity to view this machine on-site under power and see for yourself its condition.

Condition: like new (used), Year of construction: 2006, Year 2006 Excellent condition Welcome to view prior to prior X-Axis- 450 mm Y-Axis - 300 mm Z-Axis - 350 mm Table Length - 800 mm Table Width - 400 mm Table load - 400 Spindle speeds - 2500 Rpm Feed rate X-Axis - 0-4000 mm/min. Feed rate Y-Axis - 0-4000 mm/min. Feed rate Z-Axis - 0-4000 mm/min. Dsdpowwk Tvsfx Ac Njcc Feeds all 3 directions Heidenhain digital read out Motorised ram adjustment Milling and drilling pinole Removable housing

Condition: new, mileage: 10 km, power: 133 kW (180.83 HP), fuel type: diesel, overall weight: 3,500 kg, fuel: diesel, color: white, gearing type: mechanical, emission class: euro6, suspension: steel, Equipment: ABS, air conditioning, airbag, all-season tires, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking heater, parking sensors, power assisted steering, seat heater, soot filter, summer tires, traction control, trailer coupling, truck registration, winter tires, Peugeot Boxer Double Cab with Flatbed! New! We always have around 100 Boxers in stock! available immediately! German vehicles! with air conditioning, auxiliary heating, conversion, 3-seater, automatic climate control, 270-degree doors, and much more. We guarantee excellent value for money with the highest possible discount! The price offered refers only to the standard model! Peugeot Boxer Flatbed Double Cab INQUIRE!!!!! Thank you Dcodpfx Acji Tmcro Noc Subject to prior sale and errors! We are happy to offer financing or leasing! Please contact us with any questions!

Condition: excellent (used), CATALOGUE NUMBER 7026 TECHNICAL DATA - Infeed width: 740mm - Infeed height: 300mm - Shaft width: 780mm - Shaft diameter: 1000mm - Knife length: 780mm - Number of knives: 2 pcs - Screen dimensions: 55x55mm - Bottom: 4 toothed feed rollers - Lower shaft motor: 5.5kW - Top: 3 toothed feed rollers - Upper shaft motor: 5.5kW Dcodpfsx R Dxfex Ac Nec - Belt conveyor feeder - Length of belt feeder: 4300mm - Width of belt feeder: 600mm - Feeder belt drive motor: 2.2kW - Main motor: 90kW - Reverse - Autoreverse - Overall machine dimensions (L/W/H): 4600x2350x1700mm - Overall feeder dimensions (L/W/H): 4550x980x970mm - Total weight: approx. 11,000kg – German-made – Autoreverse (adjustable) – Used shredder, in very good condition Net price: 265,900 PLN Net price: 63,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of major currency fluctuations, the price may change)

Condition: good (used), Year of construction: 2003, Plasma cutting machine, plasma cutter for plasma cutting system, plasma/oxygen cutting system, servo motor, gear motor -Manufacturer: CR Electronic SRL / Power Automation, servo drive for plasma/oxygen cutting system -Cutting system: Type OXY 5.1 - 25 -Servo motor: Power Automation type PAT3B-S4-SRM50 -Individual components: see photos -Number: 2x drive unit available -Price: per unit -Dimensions: 475/240/H140 mm -Weight: 12.4 kg/pc. Dodewkqmiepfx Ac Nscc

Condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, control Djdpjcc Hu Defx Ac Necc -Comes from a CNC machining center -Manufacturer: Visual Data -Type: MC31 GHEB1 HOM -Dimensions: 482/365/H265 mm -Weight: 12 kg

Condition: good (used), Year of construction: 2012, 7 pcs Colli flow racks Manufacturer: SSI SCHÄFER Type: KDR Year: 2012 with hooks and screws. Span width: 1280 mm Max load per bay: 1600 KG External dimensions and weight per rack Width: 1400 mm Depth: 1300 mm Height: 2200 mm Weight: 200 KG. Price per piece: €400 Price for all 7 pieces: €2500 Dedpfxowqx N Sj Ac Nscc

Condition: good (used), MASS FLOW TRANSMITTER-PD340 Dsdpfx Acohcpwto Njcc Item: D_1596-Flowmeter-PD340, Digital flow meters Mass Flow Transmitter with or without display (New or used) PD340. Ø 1" - 4". For more informations please contact us!

Condition: excellent (used), functionality: fully functional, Heavy-duty cutting mills Manufacturer: Herbold AMIS Type: SM 60/100 7-2 Inlet opening 700 x 1000 mm Open rotor 600 mm diameter x 980 mm wide Rotor blades: 7 Dedpfxjufi Rxs Ac Necc Stator blades: 2 plus blade set: 2 Blade setting table

Year of construction: 2023, condition: like new (used), functionality: fully functional, Small Parts Counter Caterpillar U-60 (5-25 mm) The Caterpillar U-60 small parts counter is a semi-automatic counting system designed to automatically achieve a target count. The system is ideally suited for stations requiring rapid part changes and for small to medium batch quantities. Input voltage: EU: 230 V AC, 50 Hz Electrical connection: single-phase Power: 120 W Weight: 70 kg Dimensions (H x W x L): 794 x 284 x 770 mm Functional description: One-time setup for a specific part Select recipe (part, number of bags, quantity per bag) Manually insert parts into the belt intake opening The system stops automatically once the target count is reached. Dsdjx Ex D Eepfx Ac Njcc Key Features: 99.9% accuracy Parts size range: 5 mm–25 mm Quick setup: approx. 60 seconds Single initial setup per part Object versatility: one system can count a wide range of item types Quick changeover between items Machine stops counting upon reaching the preset quantity User-friendly interface Count data is stored and can be easily retrieved.