Used Emcomat 7 Technical Data for sale (41,608)

Condition: new, With 2 eccentric clamps and motor protection. Adjustable end stops for transversal and longitudinal operations. Drilling unit tiltable on both sides Westcott-drill chuck mm with protective cover Smooth running height adjustment of drilling unit by hand wheel Easy and comfortable one hand operation. Stop bar for series usable on both sides. With pin drilling device and mitre fence Technical data: Pin point distances 16, 22, 25 und 32 mm Table dimensions 600 x 320 mm Drilling depth 205 mm Drilling length 250 mm Vertical table stroke 165 mm Tilting of drilling unit on both sides 45° Motor speed 2840 rpm Engine power 3 kW S6 (2,2 Kw S1) Weight 180 kg Knjdpfxjx H Ucme Affsf

Condition: good (used), Hand lever shears, lever shears, long-blade sheet metal and round steel shears, sheet metal shears, profile steel shears -Manufacturer: Hoko, Lever scissors type HB 7 -Flat/strip iron: up to 7 mm -Sheet metal sheets: up to 4 mm -Cutting capacity: see photo of the nameplate -Lift-down device: infinitely adjustable Knjdpfx Afsiaqmqsfjf -Overall dimensions: 420/180/H1140 mm -Transport dimensions: 920/180/H325 mm -Weight: 34 kg

Condition: used, machine/vehicle number: 007930, Max. panel width: 4500 mm Max. panel length: 2200 mm Main saw blade projection: 125 mm Knodpfowgkuljx Affef No of Grippers: 9 Thin sheet loading: yes

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Equipment: documentation/manual, Sepro SR SUCCESS 7 S3 Knedpjx Eighofx Affjf Number of axis: 3 Reach: 1000 mm Payload: 3 kg

Year of construction: 2011, condition: good (used), warehouse no.: 503260 type / device: dehumidifying dryer manufacturer: Amboss+Langbein type: Sektionaltrockner H150 year of construction: 2011 The sectional dryers from Amboss+Langbein can be used for energy-saving, stationary and mobile drying. Thanks to the modular system from Amboss+Langbein, the drying system adapts individually to operational requirements and can be implemented in the smallest of spaces. Knjdpfx Ajx Eifksffjf Also available with material station and vacuum system if required. The dryers work with dew point control and energy-saving heat exchangers. Depending on the production requirements, the air throughput is regulated between 140 and 400 m³/h by process control. Each drying boiler has an individual temperature control. A separate scanning of the material to be dried prevents over-drying and insufficient drying Drying due to excessive material removal. Properties: Fully insulated drying container made of V2A stainless steel Sectional multi-boiler system Each dryer boiler individual temperature control Continuous drying Automatic air volume measurement Patented throughput recording and adapted drying Protection against overload and overdrying Dew point controlled (-60 °C tested) Process air control Batch drying Energy-saving heat exchanger Extreme drying of compressed air for electronic component manufacturing

Condition: like new (used), working width: 1100 mm unit with steel roller 2nd unit rubber with pad motor power: 11 kW oscillation via photocells 2 conveyor feed speeds pad automatically triggered with adjustment Knodpfx Aox H Rq Hjffof units switched on from the control panel material thickness sensor year of manufacture: 2002

Condition: like new (used), Year of construction: 2019, operating hours: 40 h, functionality: fully functional, machine/vehicle number: F9B192402, feed length X-axis: 450 mm, feed length Y-axis: 350 mm, feed length Z-axis: 400 mm, spindle speed (max.): 5,000 rpm, quill travel distance: 80 mm, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 5 m/min, total height: 1,990 mm, total width: 2,030 mm, total length: 1,980 mm, table width: 270 mm, table length: 400 mm, type of input current: three-phase, rotational speed (max.): 5,000 rpm, rotational speed (min.): 10 rpm, table load: 450 kg, overall weight: 2,270 kg, input voltage: 400 V, workpiece weight (max.): 450 kg, input current: 16 A, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, Immediately available stock machine from our showroom in Trencin (SK). EMCOMAT FB 450 equipped with Siemens Sinumerik 828D control. DEMO machine in "AS NEW" condition, ready for immediate delivery. We are happy to prepare an individual quotation for you. Visit us to inspect and test the machine under power. Working range X450/Y350/Z400 mm Table size 800 x 400 mm Drive power 7/10 kW Stepless speed range 10–5000 rpm SIEMENS Sinumerik 828D Kedpjxapdcofx Affonf Universal toolroom milling and drilling machine featuring the advanced Sinumerik 828D system and hydraulic tool clamping. Working range X450/Y350/Z400 mm Drive power 7/10 kW Spindle speed 10–5000 rpm Feed rate 10–2000 mm/min Rapid traverse up to 5000 mm/min Machining accuracy as per DIN 8615 Tool clamping: DIN 69871 SK40 Features: - Linear guides - Ball screws - Vertical milling head swivels +/-90° with 80 mm quill travel - Swivel device for vertical head - Hydraulic tool clamping - Coolant system - LED machine lighting - Rigid angle table 800x400 mm - Chip tray - Automatic central lubrication - Operating tools supplied - Documentation in Czech and English - Sinumerik 828D available in Czech, German, and English - 15" multi-touch display - Includes control package for 3 axes with ball screws and servo motors - Machining cycles with graphical support: - Drilling, deep drilling, reaming - Thread cutting (with length compensation) on pitch circles and in line of holes - Rectangular and circular pocketing - Slotting cycle - Dwell cycle - USB interface, etc.

Condition: used, Hand lever shears, long blade sheet and round steel shears, lever shears, sheet metal shears, profile steel shears -Handover: in current condition as viewed -Hand lever: missing -Manufacturer: VEB Pels, lever shears, profile steel shears type HS 7 -Cutting insert length: 250 mm Ksdpfxsv Eakbe Affjnf -Angle profile: see photos -Dimensions: 580/170/H600 mm -Weight: 76 kg

Condition: as good as new (ex-display), With strip knife, demonstration machine Surface planer: Table dimensions 1800 x 410 mm Kedpfxevrvnvj Affsnf Max. chip removal 5 mm Planer shaft diameter 100 mm Number of planer knives 4 pieces Thickness planer: Table dimensions 700 x 406 mm Max. clearance height 230 mm Max. chip removal 4 mm Feed speed 8 m/min Motor output 3.8 kW -S6 (3 kW S1) Weight 450 kg Symbolic photo

Year of construction: 2015, condition: excellent (used), SEPRO SR SUCCESS 7 S3 TRANS Visual 2 (2014) Linear cartesian robot Euromap 67 VISUAL 2 Number of axis: 3 Reach: 1000 mm Knedsx Edrfopfx Affof Payload: 3 kg X= 1000 mm Y= 400mm Z= 800 mm R1 = 0-90

Condition: ready for operation (used), Year of construction: 2019, General Data Measurements width 1481 mm Measurements depth 1975 mm Knsdpfx Aex D Ngfoffof Measurements height 2797 mm Machine weight 1570kg Movement X-Axis Movement 700 Y-Axis Movement 1000 Z-Axis Movement 600 This 3-axis ZEISS Contura 7/10/6 RDS was manufactured in 2019 and features a robust motorized CNC drive system with a maximum vector speed of 465 mm/s. It includes the ZEISS RDS-C articulating head and VAST XXT TL3 sensor, capable of scanning speeds up to 150 points/second. Ideal for precise measurements with a maximum workpiece weight of 730 kg. Consider the opportunity to buy this ZEISS Contura 7/10/6 RDS CMM machine. Contact us for more information about this machine. Application Types Measuring

Condition: new, functionality: fully functional, Year of construction: 2025, container length: 5.6 ft, color: grey, overall weight: 10,000 kg, maximum load weight: 9,216 kg, empty load weight: 784 kg, loading space volume: 7 m³, loading space width: 1,720 mm, loading space length: 3,740 mm, loading space height: 1,500 mm, Price on request. The price is valid ex-warehouse 33106 Paderborn! Quantity discounts available when purchasing multiple containers. Leasing/hire purchase possible. 7 units available directly from stock, RAL 7043 5 units available at short notice, RAL colours of your choice Other designs and sizes available from stock in Paderborn. You are welcome to check our current inventory on our homepage. Skip containers according to DIN 30720 Technical Description: • Internal dimensions: 3485 x 1720 x 1500 mm • Usable volume: 7 cbm • Tare weight: 773 kg • Floor: 6 mm S 235 Knodpfsw D A Hhjx Affjf • Sides: 4 mm S 235 • All plates and profiles are continuously welded • Container tested and approved according to DGUV 114-010 • Corner reinforcements • Double-sided triple tipping bearing (bolt Ø45) • Stacking angle L-profile • Safety bar • Frame edge profile U 80x50x4 • Zinc phosphate primer inside and outside, exterior • painted with synthetic resin paint (80-100 μ) • Permissible total weight 10,000 kg Errors and prior sale excepted. Photos are for reference only! If you have any questions, feel free to send us a message or call us.

Condition: good (used), Year of construction: 2007, functionality: fully functional, Technical details cutting diameter 730 mm saw band length 9195 x 67 x 1,6 mm cutting width 830 mm Control Kasto EasyControl saw band speed 12 - 120 m/min total power requirement 30 kW weight of the machine ca. 11,6 t dimensions of the machine ca. 4800 x 2600 x 2870 mm Additional information Machine is in good condition. On 7th. October 2025 the bearings of the roller wheel (belt tensioning side) have been replaced by KASTO and the switch for the belt tension was replaced. The machine can be demonstrated under power in our warehouse. Heavy-duty, high-performance band saws with a horizontally and parallel-traversing saw blade for cutting solid material, profiles, and pipes of all qualities, including difficult-to-cut materials such as titanium, Hastelloy, Inconel, etc. The optimal use of carbide or bi-metal saw blades was consistently considered during the development of these machines. Cutting range Cutting diameter: 730 mm Cutting width: 830 mm Saw blade size: 9195 x 67 x 1.6 mm Total power requirement: 30 kW Machine weight: 11600 kg Machine dimensions (L x W x H): 4800 x 2600 x 2870 mm Equipment: Carbide package With driven heavy-duty roller conveyors for the infeed and outfeed sides. Roller conveyor on the inlet side, dimensions (LxWxH) 4000x1000x500 mm Roller conveyor on the outlet side, dimensions (LxWxH) 3000x1000x500 mm Weight 2000 kg Chip conveyor Kjdpex D Td Iefx Affsnf

Year of construction: 1997, condition: good (used), Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers -Industrial trailer with: 1-axle turntable steering -3 roller conveyors, rollers: Ø 900 x 560 mm -Load capacity: max. 7000 kg Knedefk Smmopfx Affof -Tires: solid rubber -External dimensions: 4520/3375/H580 mm -Own weight: 1130 kg

Condition: as good as new (ex-display), machine/vehicle number: G-V7-LBM2200-2S-RL-400-Schweiz, Exhibition machine Hans Schreiner long hole drilling machine with one-hand operation. Optimum work thanks to fixed table and movable drill head. Standard with left/right rotation, dowel drilling device and 2-speed motor including tool compartment, eccentric clamp, miter stop Technical data: Motor output 3.8 kW Voltage 400 V Table size 570 x 300 mm Max. drilling depth 150 mm Side travel 290 mm Height adjustment 140 mm Dowel drilling device 16, 20, 22, 25 mm hole spacing Max. drill holder 20 mm Speeds 1400/2800 rpm Weight 140 kg Suction connection 100 mm Kodpfxevw Edqo Affsnf Packaging dimensions 855 x 600 x 1160 mm Prices subject to change, errors, printing and typesetting errors reserved

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Equipment: documentation/manual, SEPRO SUCCESS 7 (2013) linear robot 1000mm, 3kg Number of axis: 3 Kodpfxsx Edm Ns Affenf Reach: 1000 mm Payload: 3 kg

Condition: ready for operation (used), Year of construction: 2019, operating hours: 40 h, Control Unit Brand SIEMENS Model Sinumerik 828D Main Drive Spindle speed range 10–5000 Number of axis 3 Knedpjx D Havofx Affjf Movement X-Axis Movement 450 mm Y-Axis Movement 350 mm Z-Axis Movement 400 mm Tools Type of tool holder SK40 This 3-axis EMCO Emcomat FB-450 MC was manufactured in 2019. It features a travel range of X450/Y350/Z400 mm, a fixed angle table of 800x400 mm, and a table load capacity of 450 kg. The spindle speed reaches up to 5000 rpm, complemented by a rapid traverse of 5000 mm/min. Includes a Sinumerik 828D interface with multi-touch display and a comprehensive 3-axis control package. If you are looking to get high-quality milling capabilities consider the EMCO Emcomat FB-450 MC machine we have for sale. Contact us for more information. Application Types Milling

Year of construction: 2024, condition: used, New demonstration machine! List price: €13,585. #4152018486 Description: Durable, directly driven compressor blocks. Maximum user convenience thanks to the AIR ENERGIE CONTROL 3+ electronic control system with direction of rotation monitoring, display of operating hours, maintenance schedule, service notifications, load hours, etc. Equipped with integrated refrigeration dryer: DK 1200 SMART refrigeration dryer mounted on tank. Turnkey installation thanks to integrated dryer. Optimally adapted to actual air consumption via speed regulation. Simple operation and maximum user comfort via the user-friendly electronic control system. Requires minimal space thanks to compact dimensions. Significant time and cost savings in maintenance due to easy access to all service parts and direct drive. Extremely quiet operation due to sound-insulated housing. Easy installation of exhaust duct thanks to top-mounted exhaust outlet. Prevention of costly damage at start-up due to integrated direction of rotation monitoring. TIP: Screw compressors with integrated refrigeration dryer mounted on tank are extremely space-saving and guarantee high air quality. Technical data: Final compression pressure: 12.5 bar Working pressure: 5-12.5 bar Free air delivery at working pressure (ISO 1217): 270-1,224 l/min Compressor speed at 7 bar: 5,023 rpm Rated drive motor output (V/Hz): 7.5 kW (400V/50Hz) Drive motor protection class: IP 55 Sound pressure level (LPA1 DIN 45635 T13): 64 dB(A) Air outlet connection: 3/4" i Tank volume: 500 l Dimensions (W x D x H): 1935 mm x 655 mm x 1680 mm Weight: 427 kg Knjdpfx Asutux Ssffjf Technical data – Refrigeration dryer DK 1200 SMART: Flow rate at pressure dew point +3°C: 1200 l/min Pressure: 7 bar Pressure loss: 0.25 bar Voltage: 230V/50Hz Power consumption: 0.23 kW Air connection: 3/4" a Refrigerant filling: R134a Location:

Condition: excellent (used), Year of construction: 2019, operating hours: 500 h, ABB IRB1200-7/0.7 Demo Robot 2019 Full of options +-500 hours DEVELOPMENT OF GSG ROBOTICS Knsdoxq Ttiepfx Affef GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: good (used), Plasma hose assembly, welding torch, MIG/MAG torch -Manufacturer: Kjellberg, Plasma machine torch hose assembly, water-cooled Ksdpox Eipvefx Affenf -Type: PerCut 100-1/O2 -Item No.: 11.835.421/56615/009 -Length: 7.0 m -Transport dimensions: Ø 570 x 170 mm -Weight: 10 kg

Condition: new, INA MHA260-0-0-1-1-4-1088-01,0M-7-1 angle measuring system, serial number as per photo, unused in opened original packaging, 100% functional, scope of delivery as per photos Knodpji Ea Uyofx Affsf

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Equipment: documentation/manual, Sepro Success 7 Number of axis: 3 Reach: 1000 mm Payload: 3 kg X=1000 mm Y=400 mm Z=800 mm Knedpfx Afex Ec E Rsfef C= R1 pneu Euromap 67 yes Pressure circuit : 1 Robot is immediately available Available list of Robots: SUCCESS 7| R001321-03| 2016 ---|---|--- SUCCESS 7| P22212| 2014 SUCCESS 7| P24358| 2015 SUCCESS 7| P19869| 2013 SUCCESS 7| R001321-04| 2016 SUCCESS 7| R004687-01| 2017 SUCCESS 7| P22213| 2014 SUCCESS 7| R001321-02| 2016 SUCCESS 7| P24357| 2015 SUCCESS 7| P22214| 2014

Year of construction: 2016, condition: ready for operation (used), Control Unit Brand SIEMENS Model 828D Main Drive Spindle speed range 53 / 50 mm Spindle motor power 7.5 / 10 kW Spindle bore 53 / 50 mm Number of axis 2 Knjdpfx Afsx D Hzasfof Movement X-Axis Rapid Traverse 10 m/min Z-Axis Rapid Traverse 10 m/min Workpiece Workpiece drm over bed 400 mm This EMCO Emcomat E-200 was manufactured in 2016. A robust horizontal turning machine featuring a swing over bed of Ø 400 mm and a distance between centers of 1000 mm. It offers a spindle speed range of 50–4000 rpm with stepless speed control and a spindle bore diameter of Ø 80 mm. If you are looking to get high-quality turning capabilities, consider the EMCO Emcomat E-200 machine we have for sale. Contact us for more information. Application Types Turning

Condition: good (used), Plasma hose assembly, welding torch, MIG/MAG torch -Manufacturer: Kjellberg, Plasma machine torch hose assembly, water-cooled -Type: PerCut 100-1/O2 -Item No.: 11.835.421/56615/020 -Length: 7.0 m -Transport dimensions: Ø 560 x 170 mm -Weight: 10 kg Knsdpox Einpsfx Affsf

Condition: new, INA MHA260-0-0-1-1-4-1088-01,0M-7-1 angle measuring system, serial number as per photo, unused in opened original packaging, 100% functional, scope of delivery as per photos Ksdsi Ea Uvjpfx Affjnf