Used Elevators for sale (709)

Condition: used, Year of construction: 2000, Overview  This complete PET bottling line was manufactured between 2000 and 2012 by a group of reputable European manufacturers, including SIG Corpoplast, KHS, Sacmi, Kisters, Paxona, and others. The line is suitable for still and carbonated soft drinks and includes a blow moulder, filler, labeller, packer, and various conveyor and inspection systems. The line reaches up to 36,000 bph at 1.5L and is available promptly. All machines are well maintained and include original components and relevant peripheral equipment. Technical data  - Capacity: - 36,000 bph at 1.5L water - 35,000 bph at 1.5L soft drinks (sweet) - 32,000 bph at 1.5L soft drinks (light) - Formats: - 0.5L and 1.5L bottles - PCO 28-1881 closure - Filling product: - Water and carbonated soft drinks (7.5g CO₂) - Closure system: - Screw caps, fed via chute and tipper (Zalkin + NSM) - Packing: Cjdpfx Aowh U Avoatohd - Shrink pack: 3x2 bottles (double lane) - Pallet type: - Euro (1,200 x 800 mm) - Düsseldorfer (600 x 800 mm) - Electrical specs: - 400 V / 50 Hz - Control systems: ABB, Siemens - Operating direction: Standard Scope of Delivery  - Blow moulder: SIG Corpoplast Blomax 24, year 2008 - 24 stations, heating oven with 20 boxes, ABB control - Incl. Preform tipper MD3, preform hopper SBT, elevator HFT, conveyor RGTD, chute ASTK - Air conveyor: NTS Mistral, year 2000 - Pneumatic adjustable rails, basket cable tray - Filler: KHS Innofill EV-VF, year 2000 - 176 electronic filling valves, valve manifold (APV), air conveyor, infeed worm, clamping star wheel - Screw capper (Zalkin, 22 heads), cap feeding (NSM), foam cleaning (ECOLAB, 2001), dosing units (2011) - Mixer / Deaeration: KHS Innopro DX65 Contimix 65/5-T20, year 2000 -  65,000 l/h, 5 components, Brix meter (Anton Paar), Hilge pumps - Labeller: Sacmi Opera 300 RF 26T/R S1E1, year 2012 - 26 plates, hotmelt, wrap-around, reel-fed, parallel infeed, safety lift version - Inspection & Coding: - Fill level and closure check: KHS Innocheck CUB Vision Circle, year 2013 - Bottle laser coding: Videojet with housing - Pack inspection: KHS Innocheck CUB, year 2015 - Packing machine: Kisters SP060V, year 2000 - Shrink-packer 3x2 (double lane), 60 cycles/min, manual lane width, foil only - Conveyors & Pack labelling: - Bottle conveyor: KHS Innoline BTR, year 2000, plastic chain, dry lubrication - Pack conveyor: Paxona + Schaefer, year 2009 - Pack labelling: Contact 100, self-adhesive label from reel

Condition: used, mileage: 163,430 km, power: 110 kW (149.56 HP), first registration: 06/2001, fuel type: diesel, empty load weight: 7,250 kg, maximum load weight: 240 kg, overall weight: 7,490 kg, axle configuration: 4x2, wheelbase: 3,600 mm, next inspection (TÜV): 11/2022, brakes: other, color: white, driver cabin: day cab, gearing type: mechanical, emission class: none, suspension: steel, number of seats: 2, Equipment: ABS, cabin, parking heater, power assisted steering, * German vehicle * Condition see photos * Original only 163.430 km * Wumag Elevant WT170 * Working height 17 meters * Lateral outreach 11.30 meters * 480° slewing range * Workman basket for 2 persons max. 250 kg with control panel * 230 volt sockets on the workman basket * Basket insulated against 1,000 volts * 4 hydraulic outriggers * Various storage boxes and shelves * Rear cab wall with window * 5-speed manual gearbox * Auxiliary heating * Electric mirrors * Comfort driver's seat, air suspension * Roof hatch * Rotating beacons * Leaf suspension * Next inspection of the platform in accordance with DGUV 11-2022 * Complete documentation available * Wheelbase: 3,600 mm * GVW: 7,490 kg * Self-propelled work machine Lifting platform If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Chjdpfx Ajxlqm Nsatsd Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: new, power: 88 kW (119.65 HP), overall weight: 3,500 kg, fuel type: diesel, color: white, gearing type: mechanical, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, The ISUZU commercial vehicle center in Germany offers expertise, service, and advice: As an alternative to the FUSO Canter 3S15: ISUZU M21 TT E MT Net / Export price: 45,940,- € 2-year warranty on the base vehicle from the date of initial registration Standard equipment: Cjdpsxmnmisfx Aatjhd - 1.9 L diesel engine, VGS turbo with intercooler, common rail direct injection, 88 kW / 120 hp, EURO VI OBD-E (torque 320 Nm at 1,600 - 2,000 rpm) - Diesel particulate filter system with DPD and AdBlue (the self-cleaning system enables cleaning of the filter without a workshop visit, thanks to the new DPD regeneration technology, which indicates when the function is needed. Simply press the DPD button and the system cleans itself in 20 minutes) - 6-speed manual transmission - Tires 205 / 75 R16 C, dual tires on the rear axle - Independent suspension at the front, solid axle with leaf spring suspension at the rear - Max. axle load at the front 2,100 kg / at the rear 2,435 kg - Disc brakes at the front and rear - Tire repair kit - Diesel tank 70 L / AdBlue tank 14 L - New and modern cab with excellent use of space, generous headroom, and ample knee room, excellent ergonomics and visibility, low step-in height - The front BI-LED lighting ensures optimal visibility in the dark. - Double door seals also reduce noise transmission to the interior, thus supporting the pleasant acoustic comfort. - Cigarette lighter, cup holders, storage compartments in the door panels and on the headliner, armrests in the door panels - Cab paint: Arc White 729 - Cab width 1,815 mm, rear axle width 1,860 mm, height 2,155 mm (top of cab) - Suspended driver's seat, passenger double seat bench, 3-seater, headrests, seat belt warning - Driver and passenger airbags, seat belt pretensioners for driver and passenger - Height and tilt adjustable multi-function steering wheel, interior mirror - Electrically adjustable and heated exterior mirrors - electronic immobilizer - Electronic immobilizer - Electric parking brake with Auto Hold-HSA system acting on the driveshaft - Double-DIN DAB+ radio 6.8" with Bluetooth - hands-free system, compatible with Apple CarPlay / Android Auto, USB charging port, connection for reversing camera - Interior mirror with integrated display for GSR reversing camera - Driver information display 7" - Fog lights, daytime running lights, automatic headlight control - Central locking with remote control, tire repair kit - Smart key - Air conditioning Equipment Safety Pack 1: - ABS: Anti-lock braking system with BAS - ASR: Anti-slip regulation on the rear axle - EBD: Electronic brake force distribution - EVSC: Electronic stability control - LDWS: Lane departure warning system - MOIS: Moving object detection - DWS: Distance warning system - MAM: Emergency braking in front of an obstacle - FVSN: Front field recognition - TSR: Traffic sign recognition - TPMS: Tire pressure monitoring system - AEBS: Autonomous emergency braking system - RM: Reversing camera with monitor - AEBS: Autonomous emergency braking system for pedestrians and cyclists Vehicle body: Aluminum - Three-sided tipper in reinforced design (Dimensions approx. 3,100 x 1,950 x 400 mm i.L.) - Side walls folding, rear wall pivoting and folding - Elevated front wall with ladder support and support at cab height, protective grille - Dust box on the side of the vehicle frame - Lashing eyes in the B

Condition: good (used), Conveyor belt, belt conveyor, conveyor belt rubber, for bucket elevator, rubber conveyor belt, rubber mat, rubber plate, stop rubber, stop plate, rubber cover, rubber pad, rubber mat, rubber strip, rubber strip with fabric insert, scraper bar, rubber lip -Conveyor belt: rubber strip with fabric insert -Width: 250 mm -Length: 23.5 m -Thickness: 8 mm -Shipping/Price: complete -Transport dimensions: Ø 580 x 250 mm -Weight: 59 kg Cjdpfx Aajxc Ip Ajtohd

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 11,989 h, load capacity: 8,000 kg, lifting height: 3,750 mm, load center: 900 mm, fuel type: diesel, mast type: duplex, power: 87 kW (118.29 HP), total height: 3,180 mm, Equipment: air conditioning, cabin, hydraulically sliding cabin, lighting, pallet forks, sideshift, trailer coupling, Diesel forklift LINDE H80D-01/900 Year of manufacture: 2011 According to the hour meter: 11,989 hours 8 tons lifting capacity at 900mm load center 3.37 meters lifting height 3.18 meters mast height 3.37 meters overhead guard height 2.20 meters fork carriage width 2.60 meters fork length 87 kW Deutz 6-cylinder engine - FULLY EQUIPPED!! - Fork adjustment - Side shifter - Dual tires - Elevated special cabin - Cabin with hydraulic tilt - Reversing device Cjdpfx Aezrnf Nsatjhd - Rearview camera - Air conditioning - Radio - and much more... Immediately ready for use! Original paint! Selling price: 19,900,-- net Delivery also possible!

Condition: used, Year of construction: 2022, Langhi Butter Churn – 2000 Litres Experience the ultimate in dairy processing with the Langhi Butter Churn, designed for large-scale operations. With a robust capacity of 2000 litres, this high-efficiency churn is perfect for dairy manufacturers looking to produce large quantities of high-quality butter. Features: - High Capacity: Efficiently process up to 2000 litres of cream, meeting the demands of commercial dairy production. - Quality Construction: Built with durable, high-grade materials to ensure longevity and withstand rigorous daily use. - User-Friendly Design:Equipped with an intuitive control panel for easy operation and precise monitoring of the churning process. - Energy Efficient: Designed to optimize energy consumption without compromising on performance, helping you save on operational costs. - Easy to Clean: Features a hygienic design with smooth surfaces, making cleaning and maintenance a breeze. Benefits: - Consistent Quality: Produce uniform butter with superior texture and taste thanks to precise control over the churning process. - Time-Saving: Reduce processing time while maximizing output, allowing you to meet production targets efficiently. - Versatile Use: Ideal for both small and large dairy farms, as well as processing plants. Elevate your dairy production with the Langhi Butter Churn - the reliable choice for efficient and high-quality butter manufacturing. Chjdpfozxxrysx Aatsd Capacity: 2000 Litres Jacketed: Yes Interanal Kneaders: Yes Electrics: 3 phase - 400v - 50hz Butter OutPut: 500 kg Glass View: Yes Sealing Door: Yes Gear Drive: Yes Clutch: Electric Available: Immediate

Condition: excellent (used), Industrial Linear Cooker – Stainless Steel Industrial linear cooker made of stainless steel, designed for the continuous cooking and heat treatment of food products within industrial processing lines. The equipment allows for continuous and controlled heat treatment while the product moves through the processing zone, facilitating uniform production and integration with the different stages of an automated line. Its stainless steel construction, continuous transport system, and industrial design make it particularly suitable for processing plants for vegetables, fruits, and other food products. Chodpfx Aozxcazeatod MAIN FEATURES -Type: Industrial linear cooker -Application: continuous cooking/heat treatment -Continuous processing system -Automatic product transport -Stainless steel construction -Product feeding zone -Heat treatment section -Continuous discharge -Motorized transport system -Integrated control panel -Hygienic design for the food industry -Robust construction for industrial use -Integrable into existing processing lines -Designed for continuous operation PROCESS The linear cooker is designed to perform continuous heat treatment of the product, eliminating the need to work in batch processes. The product is introduced into the equipment and advances in a controlled manner through the cooking zone, remaining for the established time to receive the required heat treatment. Subsequently, it is continuously discharged to the next stage of the process. It can be integrated with: Feeding systems Washers Peelers and cutters Conveyors and elevators Scalders Cooling systems Inspection belts Freezing equipment Fillers and packers Complete processing lines APPLICATIONS Particularly suitable for the fruit and vegetable processing industry, canning companies, frozen food manufacturers, and prepared food plants that require a continuous cooking or heat treatment system. Depending on its configuration and process conditions, it can be used for vegetables, legumes, fruits, and other food products that require a cooking or heat treatment stage before subsequent cooling, freezing, preservation, or packaging. Its continuous linear processing and stainless steel construction provide a robust solution for automated industrial lines for heat treatment. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Year of construction: 2017, condition: excellent (used), Karl Schnell Processed Cheese Blending Line Capacity: 5,000 kg per hour. Chsdpozxcgbofx Aatsd Complete Karl Schnell preparation/blending line, ideally suited for the preparation and blending of ingredients prior to the processed cheese melting process. Designed for efficient processing of cheese blocks, butter, powders, and other dry ingredients. The Karl Schnell grinder offers capacities of up to 5,000 kg/h, depending on the product. The line can feed a processed cheese UHT system and/or multiple cookers, making it highly suitable for continuous industrial production. Two heavy-duty ribbon blenders provide efficient and homogeneous mixing of all ingredients. Large buffer tanks ensure controlled product flow. Equipped with heavy-duty Waukesha pumps, load cells, recipe-controlled operation, CIP capability, and an integrated pigging system. Designed for large-scale industrial use, offering high capacity, flexibility, and reliable ingredient preparation. Machinery: - Processed Cheese Blending Line 1. Trolley Elevator 2. Grinder 3. Conveyor 4. Blender 1 – 1,500 kg with buffer 5. Blender 2 – 1,000 kg with buffer 6. Pigging system

Year of construction: 2000, condition: good (used), BOBST SP 142-CER MATIC combines die-cutting, waste stripping, and automatic blank separation in a single production process. The machine includes useful tooling and preparation equipment and underwent various technical upgrades in 2014. Machine Summary Manufacturer: BOBST Model: SP 142-CER MATIC Machine type: Automatic flatbed die cutter with stripping and blanking Year of manufacture: 2000 Modernization: Various technical upgrades carried out in 2014 Delivery terms: FCA/Germany FGT visual condition rating: 7/10 The rating is based on the currently available photographs. Final technical evaluation remains subject to inspection and production testing. Why This Machine Is Interesting The BOBST SP 142-CER MATIC is a robust industrial die-cutting solution for large-format folding carton and packaging production. Its main advantage is the integration of three production processes within one machine: · Flatbed die-cutting · Automatic waste stripping · Automatic blank separation This configuration reduces manual handling and additional production steps. Finished blanks can be separated directly during the die-cutting process, resulting in higher productivity and more efficient downstream processing. The elevated machine design provides good accessibility to the individual production sections. The included preparation table and tooling racks support organized tool storage and faster job preparation. Technical Data Maximum sheet size: 1,020 × 1,420 mm Minimum sheet size: 500 × 700 mm Maximum production speed: 6,500 sheets/cycles per hour Machine Configuration · Automatic sheet feeder · Large-format flatbed die-cutting section · Automatic waste stripping station · Upper quick-lock stripping frame · Lower quick-lock stripping frame Csdpszmhgcofx Aatshd · Upper blanking and separation station · Automatic delivery section · Pneumatic delivery rake · Elevated machine configuration · Operator platforms and access stairs · Central machine control panel · Operator monitor · Individual operating panels at the production sections · Safety guards and safety systems · CE-marked machine · Various technical upgrades carried out in 2014 Included Accessories The following equipment is included: · Preparation table for lower tools · Two storage racks for die-cutting tools · Pneumatic delivery rake · Upper and lower quick-lock frames for the stripping station · Upper blanking and separation equipment · Additional equipment according to the available retrofit documentation Existing job-specific cutting, stripping, and blanking tools are included only where expressly confirmed in the final scope.

Condition: used, mileage: 227,651 km, power: 265 kW (360.30 HP), first registration: 05/2014, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 11/2026, color: white, gearing type: automatic, emission class: euro5, total length: 9,800 mm, total width: 2,550 mm, total height: 3,720 mm, loading space length: 6,404 mm, loading space width: 2,528 mm, loading space height: 897 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, * Radio * On-board computer with multi-function steering wheel * Bluetooth hands-free system * Cool box ----* Cruise control * Engine brake * Leaf/air suspension * Hill start assist * Steerable and liftable trailing axle * Differential lock, rear axle ----* Sun visor * Storage compartments (aluminum) * Fifth wheel coupling with DouMatik ----Stuerenberg construction materials tipper body * High side walls (foldable) ATLAS 210.2V-13,8/3/V103 loading crane * Elevated operator seat at the rear * 2 additional hydraulic outriggers * Radio system with remote control * Max. outreach 13.80m with a lifting capacity of 980 kg * Max. lifting capacity 330 kg at 5.90m * KINSHOFFER K100 stone clamp -----* Tire dimension, front axle: 385/65R22.5 * Tire dimension, rear axle: 315/80R22.5 * Fuel tank: 380 kg Cedpfxezm E Ido Aatehd * AdBlue tank: 50 liters * Technical total weight: 27000 kg * Unladen weight: 14425 kg * Permissible trailer load: 26000 kg * Overall length: 9800 mm * Next inspection due: 05.2026 ----Vehicle number: 12261----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.----We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of everything. Among other things, we can offer you the following services for an additional fee:----Trade-in of your old vehicle, TÜV/technical inspection, complete export processing, arrangement of financing, application for export license plates, vehicle transport, vehicle registration, recovery and vehicle transport.----YOUR VTS TEAM

Condition: good (used), Year of construction: 2013, functionality: fully functional, total height: 4,000 mm, load capacity: 600 kg, construction height: 4,000 mm, total width: 1,200 mm, total length: 800 mm, input voltage: 400 V, Meyma HK 602 VL bowl lift / tipper, built in 2013, with a total height of approx. 400 cm, currently configured for Diosna bowls 120a and 160a with "fork- / eye mount", dumping height currently set to approx. 200 to 250 cm, including monitoring of the safety zone without protective grilles, manual operation, including documentation (manual / inspection log), was still in operation until the end of March. Ready for loading in D-59192 Bergkamen. (A matching forklift truck is available for tipping and loading.) Technical specifications: approx. 120 cm wide, approx. 80 cm deep and approx. 400 cm high, weight: approx. 1,250 kg Electrical connection: 380 / 400 V, 16 A CEE plug Cjdpoy Sb Sfefx Aatjhd Price in "bakery condition" ex warehouse: € 12,500 net

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PSP-26001, pressure: 0.4 bar, total width: 500 mm, total length: 500 mm, total height: 1,950 mm, overall weight: 75 kg, warranty duration: 3 months, manhole location: bottom, empty load weight: 50 kg, input voltage: 230 V, machine base height: 250 mm, type of input current: AC, volume flow: 0.15 m³/h, Equipment: documentation/manual, type plate available, Continuous-flow pasteurizer (throughput volumes depend on operating time, hygiene, and precision): Csdszg Dlbspfx Aatshd • Performance and investment suitable for small on-farm dairies as well as local processing workshops: 700 liters in 6 hours. • Base of 50x50cm, 200cm high. Removable side guards. • Gravity-fed milk flow: provides stable flow and smooth regulation. The milk or juice is fed or pumped into an intermediate container at a height of 4 meters and flows from there to the bottling station. • A pump supplies this container at the elevated height. It also ensures effective cleaning through intense detergent circulation. • Manual control by the operator at the bottling station with alarms for "too fast" filling (incomplete pasteurization) or "too slow" filling (product overheated): the operator can then slow down or speed up the bottling process. • No contact with air: Hygienic and precise processing! • Only 2.2 kW of electricity to pasteurize more than 120 liters per hour (700 liters per day). Automatic control of the water bath temperature with a setpoint between 70 and 92°C (from thermization at 65°C to "cooking" for yogurt at 85°C). • The basic pasteurizer consists of: 1. a heat exchanger between the incoming (cold) milk (or juice) and the pasteurized milk (or juice) (72°C), 2. a heating tank (2.2kW, temperature adjustable to 5°C above the pasteurization setpoint) in which a coil is immersed, through which the liquid exiting the heat exchanger circulates, 3. a well-insulated holding tube where the milk/juice is kept for 15 seconds at the pasteurization temperature, 4. a temperature controller to illuminate a light if the liquid is too cold and another if the liquid is too hot, 5. a tube leading to the elevated inlet container, tubes connecting all components, one or two tubes with a Mohr clamp for manual filling of bottles (optional bottling unit) or jars (one at a time), 6. a drain valve at the lowest point (after pasteurization and holding, and before returning to the heat exchanger): allows the circuit to be emptied down to the last drop of pasteurized product. 2. Transfer pump with controls: • Prevents the need to transport milk or juice by pumping it from where it is located (tank on a trailer, refrigerated tank, receiving tank, container, etc.) to the inlet tank of the pasteurizer on the upper floor. • Automatic pause when the inlet tank of the pasteurizer is full (conductivity probes). Automatic restart when the level drops. • Performance between 8 and 25 liters per minute (depending on the height difference). • Also ensures powerful cleaning of the entire pasteurization circuit. • Food-grade design and materials. • Electrical consumption of 400 W. • Option: 200µm basket filter for wort, juices, and herbal extracts with moderate alcohol content. 3. Option: "Manual gravity-fed bottling unit with automatic stop, 180 liters per hour": twice the throughput with less work!

Condition: ready for operation (used), functionality: fully functional, suction capacity: 20,000 m³/h, production capacity: 1,300 unit/h, No minimum price – guaranteed sale to the highest bidder! The hammer mill (year of manufacture 2021) has only approximately 2 operating hours! The system is suitable for straw, hay, alfalfa, compost, wood, and other agricultural raw materials! TECHNICAL DETAILS Capacity (material-dependent) max.: 1,300 kg/h MACHINE DETAILS Hammer mill power: 75 kW Pellet press: 75 kW, without control unit Bale shredder: 35 kW, including control unit Dust filter capacity: 20,000 m³/h, including control unit Operating hours Entire line: approx. 1,500 h Hammer mill: approx. 2 h EQUIPMENT Pellet press Conveyor belt Elevator Pellet cooler with screen Buffer tank with discharge 2 cyclones with rotary valve airlock Fan for cooler extraction New die Cjdpfxszgf A Uo Aatjhd Various used spare parts 10 m feed table for the bale shredder Bale shredder, including control unit Hammer mill, including control unit Centrifugal separator Big bag station for dust filter Dust separation technology: EU-ATEX Directive 2014/34 Positive dust explosion assessment from 2023 Note: The line has already been dismantled and is ready for loading.

Condition: used, High Speed Elevating Rail Vertical Boring Machine with Power Indexing Turret & Copying Attachment. Four Jaw Chuck Size 48" Diameter. Table Swing 60" Diameter. Max Height Under Cross Slide 60" Turret Rise & Fall 36" Speeds 10.5 - 234 rpm Chodpozy Ik Iefx Aatjd With 4 Sets of Chuck Jaws, Equipment, Chuck Guards & Newall Digital Readout System.

Condition: excellent (used), Double Vibratory Feeder / Positioner – Length 3.40 m – Stainless Steel Csdpezxmf Uofx Aatjhd Industrial double vibratory feeder/positioner, designed for feeding, distributing, orienting, and controlled transferring of products to the next stage of an automatic processing or packaging line. The unit incorporates two independent vibratory channels, each driven by its own vibration system, allowing the product to be distributed in a progressive and regular manner. This principle is particularly useful for preventing accumulation and achieving a more uniform feed to downstream equipment. With an approximate length of 3.40 m, the equipment features a robust industrial construction, primarily in stainless steel, suitable for professional lines in the food industry. MAIN FEATURES -Type: Double vibratory feeder / positioner -Approximate length: 3.40 m -Configuration: Double vibratory channel -Two independent feeding systems -Driven by electric vibrators -Controlled product distribution -Advancement by vibration -Continuous and uniform feeding -Positioning / orientation function depending on the product -Construction primarily in stainless steel -Open channels for easy access -Robust support structure -Design for continuous industrial operation -Suitable for integration into automatic lines -Can be used as a buffer between different stages PROCESS The product is received in the feed channels and, through the action of the vibratory motors, advances progressively along the equipment. The vibration allows the product to be distributed and spaced, providing a more regular feed to the machine located downstream. The double configuration allows the flow to be divided into two independent paths, which is particularly interesting when it is necessary to feed two inlets simultaneously, distribute a production, or improve the distribution of the product before a subsequent operation. It can be integrated with: Elevators Receiving hoppers Selection and sorting systems Slicers Weighers Dosers Fillers Packagers Conveyors Complete processing lines APPLICATIONS Especially suitable for food industries, fruit and vegetable processors, frozen food products, and packaging lines that need to regulate, distribute, or position the product before another machine. Depending on the configuration and characteristics of the product, it can be used with different solid or particulate products compatible with vibratory feeding. The combination of a double channel, 3.40 m in length, and independent vibratory drive provides a practical solution for achieving a continuous and organized feed within industrial lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), 477 USED Diosna HK 224 bowl tipper. Chjdpfx Aajzxnxpetsd EXTERNAL DIMENSIONS (in cm): - W: 180 - L: 210 - H: 320 TECHNICAL DATA: - power: 1,1 kW - power supply: 400V 50Hz The price is a net price. Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: excellent (used), BILWINCO 14-Head Multi-Head Weighing Machine – Stainless Steel BILWINCO 14-head multi-head weighing machine, designed for the automatic, precise, and continuous weighing of food products before dosing and packaging. The equipment uses a multi-head combination weighing system that automatically selects the most suitable combination of hoppers to achieve the target weight of each dose. Its 14-head configuration allows for efficient operation in industrial lines that require precision, repeatability, and continuous feeding. Primarily made of stainless steel, this BILWINCO weighing machine is designed for integration with packaging machines, filling machines, and other automatic dosing systems. MAIN FEATURES -Manufacturer: BILWINCO -Type: Multi-head weigher / combination weigher -Number of heads: 14 -Automatic combination weighing system -Dosing controlled by weight -Multiple weighing hoppers -Automatic product distribution -Continuous industrial operation -Construction primarily in stainless steel Chjdszw D Htjpfx Aated -Hygienic design for the food industry -Compact configuration for in-line integration -Designed for automatic feeding of packaging machines -Integrable into existing weighing and packaging lines APPLICATION The BILWINCO 14-head multi-head weighing machine is designed to divide the product among different weighing hoppers and automatically calculate the combination that best approximates the programmed weight. Once the combination is selected, the corresponding hoppers discharge the product to form the required dose, which can be transferred directly to a packaging machine, filling machine, or other downstream equipment. This system allows for an automatic, fast, and repetitive weighing and dosing process, reducing manual intervention. It can be integrated with: Elevators and feeding systems Product conveyors Vertical packaging machines Pouch packaging machines Tray and container filling machines Dosing systems Weight controllers Metal detectors Packaging and end-of-line equipment APPLICATIONS Especially suitable for food industries, frozen food manufacturers, snack producers, vegetable processors, prepared food companies, and packaging companies that require automatic weight-based dosing. Depending on its configuration, it can be used for a wide variety of solid, granular, diced, or portionable products. The combination of BILWINCO technology and 14 weighing heads provides a particularly interesting solution for automatic lines that require precision and continuity in dosing. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: new, Year of construction: 2026, This is a state-of-the-art CNC machine dedicated to the industrial sector, used for cutting sheets and profiles, using a plasma torch. The machine is characterised, among other things, by a robust structure made of the highest quality steel and aluminium, a large cutting range, the possibility of cutting workpieces of any shape and low process costs. The high-end solutions used in production ensure reliable and safe operation. The cutting of the material is carried out in a short time, while maintaining the precision of the workpiece. In order to obtain the desired shape, it is only necessary to import the file into the software, so operation of this cutting machine is easy and intuitive. Our plasma cutting machines are primarily designed to process materials such as: - Black steel, - Stainless steel, Chjdeiqn Uujpfx Aated CONSTRUCTION The frame of the plasma cutting machine is designed and manufactured from scratch in our factory. The high quality steel used for the machines is cut, then welded and machined. The entire frame, gantry and gantry arms have additional ribbing to achieve high rigidity and eliminate vibration and deformation. DRIVES Servo AC motors with high resolution and power have been used to drive our cutters, ensuring adequate acceleration and speed in each direction. These are highly dynamic and precise motors with feedback, guaranteeing zero defect by continuously controlling the operating parameters. The X and Y axes use classic and well-proven helical bars, which ensure long life and precision. FUEL Our plasma machines use components from the leading manufacturer PGCNC. The technologies used in the torch significantly increase productivity and cutting speed. HD technology provides better hole quality, increased piercing capacity and bevelling capabilities. This ensures high quality, repeatable cuts and maximises productivity with minimal running costs and reliability. KNIFE TABLE The knife table is made with technology that is resistant to working at elevated temperatures. This allows us to work continuously without worrying about the occurrence of burn-outs that prevent the material from being evenly positioned on the work table. The positioning of the scissors can be easily changed according to the size of the workpieces to be burnt. The knife table is an excellent solution for cutting thicker materials. SOFTWARE The machine is equipped with Starfire 2D CAD/CAM software. Various functions are available to the user, including the ability to import finished designs in vector formats: .dxf, .plt, .ai, .eps. The programme ensures fast and precise development of cutting paths. PLASMA SOURCE The basic plasma equipment includes the 120A cutting system, which is characterized by high productivity and cutting quality and speed. AUTOMATIC LUBRICATION SYSTEM Plasma cutting machine equipment also includes an automatic lubrication system that minimizes machine maintenance. The central lubrication system is a simple and functional device used to supply grease to the places where machine and equipment components come into contact. - POWER 400V 50Hz - MAX SPEED 45 m/min - DOOR SHAPE 200-600 mm - TYPE OF WORKING TABLE Knife table - WORKING TABLE WEIGHT 500 kg/m2

Condition: used, machine/vehicle number: LC521, Used bottling line PROCOMAC for still and sparkling water up to 12000 bph We offer a complete bottling line for natural and carbonated mineral water, specifically designed to meet the complex needs of technicians and industry experts. This solution not only handles bottle formats from 0.5 to 2 liters but also produces up to 12,000 bottles per hour, ensuring high reliability and excellent performance.. SIPA Blow Molder and Preform Management The SIPA SFR 12 blow molder, manufactured in 2000, initiates the production process. It efficiently manages preforms using a dumper and elevator-orienter. Furthermore, the integrated cooling chiller and four sets of molds allow the machine to produce bottles of various sizes with both precision and flexibility. As a result, it ensures smooth operations throughout the initial production phase. PROCOMAC Monoblock: The Core of the System The PROCOMAC monoblock unifies three critical bottling functions into a single system. First, the PROCOMAC GRIPSTAR 2R rinser cleans bottles thoroughly, preparing them for the filling process. Then, the PROCOMAC FILLSTAR PET filler quickly and accurately fills bottles with natural or carbonated mineral water. Finally, the PROCOMAC 10-head PICK & PLACE capper applies caps securely and efficiently. Moreover, the saturator and CIP (Clean-In-Place) system maintain hygiene standards and streamline maintenance operations. These additional components not only enhance the monoblock’s efficiency but also ensure reliable performance during production. Transport and Packaging Systems The PELACCI P.13.8.5 cap elevator consistently supplies caps to the system without interruptions. In addition, the PE ROLLMATIC CI 540 12T labeler applies labels accurately to bottles of different formats. Subsequently, the ZAMBELLI LFT 50 shrink wrapper quickly packages bottles into bundles, while the COMAG H 55/1 handle applicator attaches handles to bundles for easier transport. Furthermore, the LEVATI ARTIS palletizer organizes bundles onto pallets with precision. Similarly, the ROBOPAC HELIX HS 30 pallet wrapper wraps the load securely to protect it during transportation. Lastly, the EIDOS labeling system prints and applies labels directly on the production line, allowing for full customization, which ensures adaptability to various production requirements. Conveyor Belts for Optimal Flow The conveyor belt system facilitates efficient material flow across the production phases. Specifically, air conveyors move bottles swiftly, while dedicated belts transport bundles and pallets seamlessly between sections of the line. Consequently, these systems maintain a continuous and smooth workflow, which significantly reduces production downtime. Csdpfx Aaovgu Tyotohd Current Status and Availability This Used bottling line PROCOMAC for still and sparkling water up to 12000 bph operates efficiently and will remain in use until April 2025, when it will be dismantled and replaced. Therefore, we encourage interested buyers to view the line in operation before dismantling to evaluate its performance and condition. Ultimately, this complete and integrated solution delivers reliable and high-performing bottling capabilities for industrial water production.

Condition: used, machine/vehicle number: LC426, Used Bottling Line KRONES for Glass Bottles up to 20000 bph Introduction to the Bottling Line KRONES Initially, the used KRONES bottling line for glass bottles is highly sought after in industrial settings due to its reliability and efficiency. Comprising a range of top-tier components, the Complete Bottling Line KRONES ensures seamless performance, effectively meeting the stringent demands of high-volume production. Main Components Chedpfxovgvwmo Aatjd Firstly, the KRONES K-131-669 filling monoblock, manufactured in 2016, stands as the centerpiece of the Complete Bottling Line KRONES. Capable of handling a remarkable 20,000 bottles per hour, it is complemented by the 1998 KRONES 472-072 depalletizer and the 2000 Gronemeyer RINSER 8983-400-4. Consequently, this collective setup facilitates a smooth and uninterrupted workflow from bottle unloading to the filling process in the Complete Bottling Line KRONES. Quality Control of the Used Bottling Line KRONES Maintaining product quality is paramount in any bottling operation. Therefore, the 1999 KRONES CHECKMAT inspector plays a pivotal role in this regard in the Complete Bottling Line KRONES. With advanced functionalities encompassing not only level control but also meticulous label inspection, it ensures that every product meets the desired standards. Furthermore, the 2000 ACI TA20 2 AE bottle dryer guarantees that bottles are impeccably prepared for subsequent labeling and packaging stages, effectively eliminating any potential issues that may arise from moisture. Labeling and Packaging Efficient labeling and packaging are essential components of the KRONES bottling line. Consequently, the 1999 KRONES STARTMATIC K-080-669 excels in these areas. With precise label application capabilities, coupled with the ability to print directly onto glass bottles, it not only streamlines operations but also elevates brand presentation in the Used bottling line KRONES for glass bottles up to 20000 bph. Complementing this is the 1999 SMI SMI/7507 case packer and the 1997 FRANPACK Typ 121971214 pallet wrapper, ensuring that products are securely packaged and ready for distribution. Operational Status and Specifications The KRONES bottling line is in flawless working condition, and meets the demands of modern production environments. With a remarkable throughput of 20,000 bottles per hour, the line promises to enhance operational efficiency while maintaining product quality. Specifically designed for glass containers and primarily catering to beer production, it guarantees precise and consistent fills, ultimately resulting in superior product quality and customer satisfaction. In summary, the KRONES bottling line represents a sound investment for businesses seeking to optimize their bottling operations. With its robust construction, cutting-edge features, and proven track record, it is poised to deliver exceptional performance and elevate production standards to new heights.

Condition: new, height of stroke ca. 700 - 1000 mm 0 500 kg Chsdpfx Aezuggkjatod

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, overall weight: 630 kg, Mobile elevating work platform €3750 excluding VAT Working height: 6 meters, can be operated while elevated Cjdpfjz Imbxsx Aatehd Batteries are 1 to 2 years old Dimensions: 1.30 x 0.78 meters Weight: 630 kg Comes with CE certificate and New safety inspection Includes Dutch manual Multiple units in stock

Condition: used, Board repacking line Cjdpfx Aajykauzstjhd Manufacturer: PlanSel/Nordautomation Pack chain conveyor Tilt hoist Board elevator Edge cutting system Measurement system Stacker with spacers Outfeed chain conveyor Boards till 6 m

Year of construction: 2004, condition: ready for operation (used), A high-temperature rolling machine for glass fiber reinforced compounds is available. 1) Large roller Comerio Ercole, year of construction: 1970, working width: 1500mm, roller diameter: 600mm, roller gap: electrically adjustable, lubrication: circulating oil lubrication. 2) Small roller Meccaniche Moderne, year of construction: 1966, working width: 800mm, roller diameter: 400mm, lubrication: circulating oil lubrication. 3) Horizontal mixer, volume: 2.5m³. 4) Big bag frame with crane. 5) 2x gravimetric dosing scales with control. 6) Conveyor belts and spiral balancing conveyor. 7) Condux HM 45/60 LA hammer mill (lined) with a 1000 mm vibrating screen. 8) 2x Lauda heaters. Including cement mixer, bucket elevator, silo, bagging scales, glass feed rack and a control cabinet for overall plant control. Documentation available. On-site inspection is possible. Chedpowk Nldsfx Aated

Year of construction: 1979, condition: ready for operation (used), A compound feed line is available. 1) Bühler hammer mill. 2) Bühler DPAB pellet press, year of manufacture: 1979. 3) Loos rapid steam generator, year of manufacture: 2000, capacity: 300kg/h, max. operating overpressure: 13bar. 4) Gebrüder Jensen weighing and mixing unit, year of manufacture: 1979. Production capacity range: approx. 5-10t/h. Including the associated drag conveyors and bucket elevators. Documentation available. An on-site inspection is possible. Individual sale by arrangement is possible. Chjdpey Aad Iefx Aatjd