Used Electromagnetic Plate for sale (12,468)

Condition: used, Year of construction: 1995, Technical details: sheet width: 3000 mm plate thickness: 12 mm distance between columns: 3500 mm control: Cybelec DNC 10 G back gauge: 1200 motorisch mm cutting angle: 1,2 - 2,73 ° cutting gap adjustment: ja mm cutting capacity : 66.000 daN daN Knife length: 3100 mm down holder: 17 Stück interface: RS232 Table dimensions: 3200 x 600 mm total connected load: 22 kW weight of the machine ca.: 11,0 + (1,0 to Anbauteile+Zubehör) t space requirements approx. LxWxH: ca. 4,5 x 2,6 x 2,1 m Csdpfx Acevc Amtj Nepu transport dimensions LxWxH: ca. 5,0 x 2,25 x 2,2 m The guillotine shear was put into operation for the first time in 1998. The DNC 10 G control unit was specially designed for guillotine shears. It has a numerical axis for controlling the backgauge and automatically calculates and regulates the cutting gap, the cutting angle and the cutting depth, taking into account the material to be cut. (Data from the manufacturer) Table with side stopL:930 x W:105 x H:42 mm 2 table extensions L:1600 x W:100 x 83 mm Angle fence (attached to table extension) Operation via control panel with swivel arm and foot control Equipment: Drain with rollers for clippings 2x protective grid *

Condition: used, Technical details: sheet width: 1500 mm plate thickness: 2,25 mm distance between columns: 1600 mm back gauge: nein cutting angle: nicht bekannt ° cutting gap adjustment: nein mm down holder: über Druckleiste Stück height over floor: 850 mm Table dimensions: LXB 1800 x 350 mm weight of the machine ca.: 0,85 t dimensions of machine: 2,0 x 0,8 x 1,3 m simple mechanical guillotine shear with shelf right/left 305 x 100mm operation via ON/OFF Cjdsu Icn Ejpfx Ac Nspu *

Condition: used, Year of construction: 1960, Technical details: sheet width: 2000 mm plate thickness: 4 mm distance between columns: 2070 mm roll dia. top roll: Ø142 (getrieben) mm diameter of lower rolls: 1. Walze Ø 145 (getrieben) mm diameter of lower rolls: 2. Walze Ø 145 (mitlaufend) mm adjustment of lower rolls: manual/mech./hydr.: 1. Walze ca. 20 mm von Hand adjustment of lower rolls: manual/mech./hydr.: 2. Walze ca. 180 mm von Hand Codpeu Icfwsfx Ac Nopu height over floor: 950 mm total power requirement: ca. 4,0 kW dimension machine xH: 3,0 x 1,0 x 1,2 m weight of the machine ca.: ca. 2,5 t Mechanical 3-roll plate bending machine Operation: Hand switch / foot switch forward/backward 2x EMERGENCY button *

Condition: used, Year of construction: 1992, Technical details: sheet width: 3000 mm plate thickness: 2,0 mm distance between columns: 3300 mm back gauge: 580 manuell mm cutting angle: Nein ° cutting gap adjustment: Nein mm down holder: 13 Stück Table dimensions: 3300 x 300 mm weight of the machine ca.: 3,0 t dimensions of machine: 3,7 x 1,5 x 1,8 m Cpedpeu Icnrjfx Ac Nju incl. 2x upper knife and 2x lower knife each 1500mm incl. table supports 1500 x 1500mm with roller elements 2x profile strips L: 1400mm 1x side stop bar 1600mm operation via control panel and/or foot pedal *

Condition: used, Year of construction: 1992, Technical details: sheet width: 4050 mm plate thickness: 16 mm distance between columns: 4900 mm control for program: Robosoft SC5 Controller back gauge: 1000 motorisch cutting angle: 0,5° - 3° ° cutting gap adjustment: ja / jes mm down holder: 23 Stück Codpou Icpcjfx Ac Njpu height over floor: 1030 mm Table dimensions: L x B 4000 x 520 mm weight of the machine ca.: 19,2 t dimensions of machine: 5,2 x 2,2 x 2,78 m characteristics: - knife length 4100mm, 4 turns possible - Number of strokes: 5 - 11 strokes/min. - Table: side stop with linear scale, with stop bar 1000mm removable, feed aid via / with ball bearings - front support: LxWxH: 1600 x 1100 x 1000 mm; movable over roller rail, easy handling - backgauge adjustable, motor driven and foldable Operation via control panel with jib lenmgth arm and foot control Equipment: - light grid at backgauge - cut line ilumination Accessories: - 1 set (2 pieces) shearing blades *

Condition: used, Technical details: Length: 400 mm width: 200 mm weight of the machine approx.: 24 kg dimensions L x W x H: 0,4 x 0,22 x 0,08 m Csdpfxju Nklhj Ac Nspu MAGNETIC CLAMPING PLATE Magnetic core quantity 21 pieces, width 4x60mm and 1x80mm, distance to each other 80 / 90mm. The plate has a T-slot guide on the side. (WidthxDepth: 16 / 5mm) *

Condition: like new (used), functionality: fully functional, Granite Measuring Table with TESA-Hite Height Gauge Condition: Used (like new) The TESA-Hite is a high-precision height gauge designed for workshop and inspection room applications. It allows for fast and accurate measurement of height, depth, and distances on components with digital display and easy operation. Thanks to the stable granite measuring plate and the low-vibration base frame, it is ideal for precise measuring tasks in production and quality assurance environments. Technical details: Cjdpfx Asxwp Icoc Njpu - Manufacturer: TESA (Switzerland) - Model series: TESA-Hite / TEFALite - Measuring range: approx. 400 mm (depending on version) - Measuring accuracy: ± (2 + L/1000) µm - Display unit: Digital with keypad control - Material: Measuring column made of aluminium, plate made of granite Features: - Precise digital height measurement - Robust and durable construction - Ideal for workshop and inspection room use - Includes granite measuring table with stable base - Ready for immediate use

Condition: good (used), total width: 390 mm, total length: 330 mm, total height: 43 mm, An AMF magnetic clamping plate is for sale in good, used condition, as shown in the pictures. Technical data: • Manufacturer: AMF • Eco-Line magnetic clamping plate for milling Cpedjyhmz Aepfx Ac Nsu • Model: 550723 New item no.: 559715 • With control unit: 550738 or 561438 • Dimensions of the plate: approx. 390 x 330 mm • Threaded holes: M8 on top / M10 on the side • Height of the plate: approx. 43 mm • With extra hand control unit: 550744 • Condition: Used, functional International buyers are welcome! You will receive an invoice with VAT shown separately. Viewing/collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free loading. Subject to errors in technical data and prior sale. Storage location: Cabinet 2

Condition: good (used), overall weight: 5,000 kg, total height: 600 mm, total length: 2,000 mm, total width: 2,000 mm, For sale here is a large clamping plate with T-slots in good, used condition, as shown in the pictures. Dimensions: approx. 200 x 200 x 60 cm (LxWxH) T-slot width: approx. 34 mm Weight: approx. 5,000 kg We can load with a forklift or crane. Sale from location 42855 Remscheid, free loading. Viewing/collection is possible by arrangement in 42855 Remscheid. Cjdpfsyhmi Hox Ac Nspu You will receive an invoice with VAT shown separately. Subject to errors in technical data and prior sale.

Condition: excellent (used), Measuring table / spotting plate by Oelze with subframe. Table dimensions: 600 mm x 1000 mm x 120 mm. Granite strips / measuring bars: 880 mm / 800 mm / 500 mm. Measuring arbor: 750 mm. Various spotting strips. Measuring bar: 500 mm. Cjdpeyhl Unjfx Ac Nepu

Condition: used, First registration: 23/05/1980, vehicle identification number: 10628, permitted gross weight: 40,000 kg; NOTE: The low loader’s registration documents are missing. A statutory declaration of loss by the owner, required for the application of new documents at the relevant road traffic authority, is available and will be handed over to the highest bidder or buyer of the low loader! Cedsyf R Easpfx Ac Njpu

Condition: good (used), Year of construction: 2004, overall weight: 6,000 kg, total height: 245 mm, total length: 5,990 mm, total width: 1,250 mm, Floorplate Length: 6000mm Floorplate Width: 1250mm Height: 245mm No. Of T-slots: 5 Distance from T to T-slot / Jump:250mm T -slot size: 28mm Length: 5990mm Width: 1250mm Height: 245mm Weight: 6000kg Cpsdpfexdltusx Ac Nju Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Straightening table, welding table Cpodpfx Aeyhhqlsc Nou Manufacturer: Stoll, made of cast iron Dimensions: 4900 x 1300 mm Lower ribbed structure, approx. 300 mm thick with 4 feet Weight: approx. 4000 kg

Condition: used, Year of construction: 2016, gebraucht 2016 9737 prompt, Zwischenverkauf v 9800 € 1 8330 € Cedpfjwiq Iwox Ac Nepu 2025 mm 3 mm 500 mm 4 kW 2500 mm 1720 mm 1200 mm 1100 kg Manual back gauge 500 mm Foot pedal Side stop 4 table support arms Light barrier protection at the rear of the machine Stroke counter Sheet ejection to the front for small parts Operating manual in English with EC declaration of conformity

Condition: used, functionality: fully functional, Year of construction: 1965, machine/vehicle number: Type: BT10x3000; Fab. Nr. MBO-559, sheet thickness (max.): 10 mm, sheet thickness steel (max.): 10 mm, overall weight: 11,500 kg, cutting length (max.): 3,000 mm, Guillotine shears, guillotine shears, VOEST BT 10 x 3000 Cpsdpfxsv Igipo Ac Neu Year of manufacture 1965 Cutting thickness 10 mm Cutting length 3000 mm Power 25 HP Weight 11.5 tons Functional, on-site inspection and testing possible

Condition: good (used), Year of construction: 1987, travel distance X-axis: 11,500 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 2,000 mm, x-travel 11,500 mm y-travel 4,500 mm w-axis 1,600 mm z-axis 2,000 mm Spindle diameter 200 mm Rotary table 3,000 x 4,000 mm Bed length of rotary table 4,600 mm Tool holder SK50 Workpiece weight on rotary table 80 t Total power requirement 83 kW Additional information Csdpfxjyg Idij Ac Nopu incl. 15 plates

Condition: good (used), Year of construction: 1983, travel distance X-axis: 6,000 mm, Spindle diameter: 200 mm Codpfx Aeyg Htioc Nopu Machining width: 6000 mm Machining height: 3150 mm Max. machining depth: 1985 mm Slide cross section: 530 x 550 mm Table load capacity: 20 t Plate field size: 11200 x 5550 mm Tool holder: SK 60 Machine weight approx.: 173 t Additional information: - Additional equipment: large and small angular heads - Listing No.: 22979 - The table is model S20 MP, size: 2200 x 2500 mm - The machining width on the X-axis of the machine is 6000 mm - Including 6 plates measuring 5600 mm x 1850 mm

Condition: new, functionality: fully functional, 4-roll plate bending machine Operation: hydraulic Sheet thickness: 30 mm (1.2 in) Csdpfjyg Hckex Ac Nspu Sheet width: Max: 1,200 mm (47 in), Min: 500 mm (20 in) 2 side supports for large diameters

Year of construction: 1998, condition: ready for operation (used), Immediately available from location: Hydraulic guillotine shear Hera Model TK 3000 / 10 Year of manufacture: 1998, only very few operating hours (as new) Motorised backgauge Backgauge controlled – 1000 mm Machine control: Siemens Simatic CP 7 Cutting length: 3050 mm Cpsdpfoyg Eivsx Ac Neu Material thickness up to 10 mm Drive: 15 kW Weight: 8 t Price: €9,500 plus VAT, ex-location

Year of construction: 1991, condition: ready for operation (used), Available immediately from location: Technoimpex hydraulic guillotine shear Type HS 5 / 2550 Year of manufacture 1991 Cutting length 2550 mm Material thickness 5 mm Digital backgauge 1000 mm Cedsyg Eicepfx Ac Njpu Drive 5.5 kW Weight 4 tons Price: EUR 4,500 plus VAT, ex location

Year of construction: 2014, condition: used, functionality: fully functional, machine/vehicle number: 2014.6.2, We are offering our CNC machining center STEINHAUER eCAB WorkCenter, year of manufacture 2014, for sale. The machine is currently still in operation and will be replaced by a newer model as part of a new investment. The eCAB WorkCenter is specifically designed for metal and plastic processing in control cabinet construction. It is ideal for automated drilling, milling, and thread cutting of mounting plates, doors, side panels, and other enclosure components made of steel, stainless steel, aluminum, and plastic. The machine operates based on CAD data and is equipped with a powerful CNC controller and automatic tool changer. Location: Andritz AG Graz, Stattegger Strasse 18, 8045 Graz. Availability: from 02/2026. Technical details and pictures are attached. Cjdpfx Acsyg D Rxo Njpu

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 16,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 2,500 rpm, feed length W-axis: 800 mm, spindle diameter: 150 mm, table load: 25,000 kg, table length: 2,000 mm, table width: 2,500 mm, The machine is in good technical condition, connected to power and can be tested. CNC control system Siemens Sinumerik 840D. Tool magazine for 80 tools, HUI 50 angular head, rotary table S 25 measuring 2000 x 2500 mm, travel 1800 mm, clamping plates 4xUD 3220x2195 mm. Codpoyg Dfcjfx Ac Nspu

Condition: good (used), Year of construction: 2010, Marble measuring plate Fabr.Fischer Type : MP 5100 Bj.ca.2010 In good condition. Codpfx Aonccycsc Nopu Dimensions : Length 5100 mm Width 1600 mm Height: 500 mm Weight.ca. 10 t.

Year of construction: 2020, condition: new, Machine plate for VDF lathes HEIDENREICH&HARBECK HAMBURG VDF BOEHRINGER GÖPPINGEN VDF Price per piece: €100 net, negotiable Cjdpfx Acjxxy Dko Njpu

Condition: good (used), Year of construction: 2000, Cast iron measuring and marking table with under-table cabinet, STOLLE MT1000. Cpedpfx Aswffz Dec Nsu Table: 1000 x 1000 mm Height: 1000 mm Weight: approx. 650 kg In good condition.