Used Eiset Toolroom for sale (44)

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, machine/vehicle number: 310435, Completely overhauled - new painting New workbench - new geometry Manufacturing origin Swiss Voltage 380V 50Hz 3Ph Customs position 8458.1930 TECHNICAL DATA Capacities : - height of centres 102 mm - distance between centre, standard headstock type W 470 mm - distance between centres, headstock type W with reduction unit 375 mm - swing over bed 200 mm - swing over carriage 120 mm Bed : - height-width-length 168-100-1000 mm cast-iron bed with ground inverted-V profile Headstocks : - spindle nose for collets W-25 - maximum bore through collet 19.0 mm - headstock with reduction unit, ratio 1:5 Carriages : - stroke of longitudinal tool slide 90 mm - stroke of transverse tool slide 100 mm - size of tools 12x12 mm Tailstocks : - internal taper of tailstock spindle Morse 2 - spindle stroke, screw- and handwheel-operated 80 mm errors and omission excepted-data given without obligation Inventory Nr.2210049, machine equipped with : - 1 workbench NEW 2000x800 mm with Urphen platte blue 2000x800x50 mm      1 foot, 1 cabinet B750 with 7 drawers 1xD50/2xD75/2xD100/1xD150/1x200 1 bed for overhead drive 1 W-20 headstock without gear reduction and drawbar, revised 1 revised screw-operated carriage 1 revised aligned tailstock 1 motor 380V/50Hz/3ph. 2 speed 1 set of collets W20 1 chuck 2x3 jaws Ø 100 mm on w-20 flange Cjdpfxjdr R Tcs Ac Nsgn 1 new set of Multifix tool holders including - 1 turret Multifix A with AG20 stud - 3 tool holders AD1675 - 1 bar holder AH2085 1 self-tightening drill chuck cap 1-13 mm on MT2 stud 1 male center MT2 OPTION 1 used tensioner with new belt CHF 500 + VAT 1 AS TYPE B-8 GRINDING MACHINE with 360° swivel quill max. speed 28,000 rpm, adjustable height, adjustment, ref. 800053 CHF 1,325 + VAT

Condition: good (used), Working travels 500x350x380mm Table size 790x360mm Spindle taper ISO40 Spindle speeds 63-4000 rpm Cgodpjff R Slofx Ac Nen Active digital read-out Misc accessories MARCELS MASCHINEN CH

Condition: good (used), Working travels 300 x 150 x 355 mm Table size 700 x 250 mm Spindle taper for collets ISO 30 Spindle speeds 58-2'000 rpm Digital read-out Misc.accessories MARCELS MASCHINEN CH Csdpsu Eqixjfx Ac Njgn

Condition: good (used), Year of construction: 2018, Table 1473 x 305mm, Traverses XYZ: 1000 x 410mm x 400mm (knee), quill travel 127mm, Spindle Taper ISO40, Power Drawbar, Spindle Motor 5HP, Spindle Speeds 70 - 3600rpm, Prototrak SMX CNC Control, Cjdpfx Acjxftqdj Nsgn

Condition: ready for operation (used), Working travels 300x150x340mm Universal table 600x260mm Spindle taper 40 Spindle speeds 40-2000 rpm Digital read-out Misc.accessories Cgodpjdr E Apjfx Ac Non MARCELS MASCHINEN CH

Condition: excellent (used), Working travels 400 x 210 x 340 mm Table size 600 x 400 mm Spindle taper ISO40 Cgsdpfjxpubrsx Ac Nsn Spindle speeds 40-2000 rpm digital read-out Misc accessories MARCELS MASCHINEN CH

Condition: good (used), Digital read-out With milling and drilling head Working travels 330 x 400 x 475mm Table size 650 x 245 mm Spindle taper for collets ISO 40 Spindle speeds 63-2'800 rpm Cgedpfxow Nnute Ac Njn Misc.accessories MARCELS MASCHINEN CH

Year of construction: 2002, condition: good (used), Heidenhain TNC 124 X-700 mm Y-500 mm Cgjdjinukmjpfx Ac Nsn Z-500 mm taper SK40 Spindle speeds 63-3150 rpm Table 900 x 500 mm weight of machine 2500 kg machine checked before delivery spare-parts available

Year of construction: 1992, condition: new, New driver ISO40 for milling machines FN 20/32/40 Csdpek Nk I Nofx Ac Njgn

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 2102-2641, Deckel FP1 Actif toolroom milling machine in very good condition. Machine Nr.2102-2641. Year of contruction 1985 Specifications: - Machine speed: 40 - 2000 rpm - Power feed X/Y/Z infinitely variable - Rapid feed X/Y/Z - X / Y / Z: 300/160/340 mm - Spindle brake - Spindle nose vertical and hor. SK40/S20x2 - Weight about 800 Kg Accessories and equipment: Cgedpfof E Ilzsx Ac Nen - 3-axis actif digital readout Heidenhain TNC113 - coolant system - machine books Offered universal milling machine Deckel FP1 aktif, is in very good condition. The machine has very little crank game and all the spindles move easily. Even at maximum speeds, the milling machine runs quietly. All guideways are in very good condition. This machine has also rapid traverse in three axes. Machine is mechanical and electrical complete checked and tested and a oil change was performed. Take the opportunity to visit us to see this machine on site and try to stream.

Year of construction: 1998, condition: new, New trapezoidal spindle+nut X-axis, for FN20, FN32, FN40 Cgedpfxek Nk Iws Ac Njn

Condition: new, The FPK 4.3 is a powerful toolroom milling machine that belongs to the category of Conventional Vertical Milling Machines. This versatile tool-milling machine, renowned in tool and mold making, offers a compact design that combines flexibility with ease of use. The premium cast-iron machine column ensures maximum dynamic rigidity and constant precision, complemented by precision preloaded ball screws on all axes for enhanced performance. Operators will appreciate the ergonomically arranged controls and the swivelling control panel that, alongside the standard digital position indicator, provide maximum comfort. With a large work table measuring 400x800 mm and a travel capacity of 500 mm on the X-axis, the FPK 4.3 is perfect for diverse applications in both training and manufacturing environments. Additionally, it features an automatic feed on all axes with infinitely variable speed settings, and a rigid outer arbor for horizontal milling, making it robust yet precise. Explore the extensive accessory package and take advantage of KNUTH’s reputation for quality – order online today and elevate your workshop with this exceptional milling machine. Csdpfxeuyh Dij Ac Njgn

Condition: new, Year of construction: 2026, operating hours: 100 h, machine/vehicle number: BMWF241003, Professional Rebuild and Retrofit of Heavy CNC Lathes: Niles, Weiler, Gildemeister, TOS, TURMN We specialize in restoring full operational capability and performing digital modernization of heavy machine tools that form the foundation of rigid and efficient production. We combine the legendary durability of heavy cast iron with state-of-the-art Industry 4.0 control systems. Why choose our retrofitted machine? Performance of a New Unit at 50% of the Price: We offer machines with the performance and accuracy of new machining centers at a fraction of the cost of a new investment. Unrivaled Rigidity: We rely on proven machine bases from brands such as Niles DFS 4 (slant bed, 17 t weight) or TOS SUA (load capacity up to 8 tons), which outperform modern, lighter designs in terms of vibration damping. Modern CNC Heart: We install the latest systems (Siemens Sinumerik ONE / 840D sl / 828D), ensuring full availability of spare parts, remote diagnostics, and ease of programming. ​ ​ Warranty and Support: Every machine after complete mechanical overhaul (DIN 8605 accuracy class) and electronic retrofit is covered by a 12‑month warranty. Our specializations: Niles DFS 3/4: Comprehensive rebuilds of multi-axis centers (C, Y, B) for the most demanding applications. Weiler E Series: Restoring legendary precision and intuitive cycle operation for premium toolrooms. Cgodsv R Dlyspfx Ac Non Gildemeister NEF 710: “Smart Retrofit” of the control system, giving a second life to these reliable German designs. TOS SUA 80/100: Complete overhauls for the heaviest shaft and large-part machining. TURMN 630/800/1100: General overhauls and “Smart Retrofit” CNC control upgrades. Our offer goes beyond selling ready-made machines. We provide full flexibility and consulting throughout the investment process: Purchase on Request: At the customer’s request, we search for the optimal machine base on European markets (e.g. Germany, Italy, Poland). We use our experience in evaluating “dead CNC” machines to buy units at a price close to mechanical scrap value, while preserving their full potential for rebuild. Evaluation and Pricing of Market Machines: If the customer finds a machine independently, we offer a professional mechanical inspection (bed geometry, spindle play) and preparation of a detailed cost estimate for overhaul and retrofit. Overhauls of Customer-Owned Machines: We carry out complete modernization of machines already installed in the customer’s machine park.

Condition: ready for operation (used), Year of construction: 1989, Available immediately from location: MAHO Toolroom Milling Machine Type MH 500 M Year of manufacture 1989 Heidenhain Digital Display Cgjdeyg Ek Tspfx Ac Njn Table 800 x 360 mm SK 40 Spindle speeds 63 – 4000 rpm Quill stroke 50 mm Travel X/Y/Z 500/380/350 mm Drive 3 kW Feed rates 10 – 1000 mm/min Coolant system Weight 1600 kg Adapters Hydraulic vise Price: €3,000 plus VAT, ex location

Condition: excellent (used), For sale: professional KOMET KFK 1 M02 02360 boring head with micrometric adjustment – a top-tier tool for high-precision hole machining in industrial production and toolrooms. Very good condition – the tool is fully functional and ready for operation. The precise micrometric scale allows adjustment with an accuracy of 0.01 mm, ensuring the highest surface finish quality. • Manufacturer: KOMET • Model: KFK 1 – M02 02360 • Mount: SK40 / DIN 69871 • Scale: micrometric 0.01 mm • Range: precision boring and finishing of holes • Condition: used – very good technical and visual condition. Cgjdjxk T H Njpfx Ac Nen

Condition: excellent (used), For sale: high-end precision boring head EPB LIBRAFLEX / GRAFLEX with SK40 DIN 69871 taper, made in France. This is a professional tool for precision hole machining—both roughing and finishing—on CNC milling machines and machining centers. This model features micrometric diameter adjustment in the range of Ø2 mm to Ø32 mm (0.079” – 1.260”), allowing for the highest accuracy in machining industrial components, moulds, and technical parts. 📌 Technical Specifications: Cedjxizcvepfx Ac Negn • Manufacturer: EPB LIBRAFLEX / GRAFLEX – Made in France • Taper: SK40 – DIN 69871 • Adjustment range: Ø2 – 32 mm • Adjustment accuracy: 0.01 mm / 0.0004” • Precision micrometric scale with clear graduation • Set includes head + holder + KOMET tool • Condition: used, in very good technical condition – ready for work ✅ Advantages: • High adjustment precision – ideal for hole finishing • Robust industrial construction – long service life • Compatible with CNC machines and conventional milling machines with SK40 taper • Micrometric diameter setting with μm reading • Ideal for industrial applications, toolrooms, and precision manufacturing

Condition: excellent (used), For sale: precision ORION dial micrometer with a measuring range of 0–25 mm and accuracy of 0.001 mm. Mounted on a robust cast iron stand for stationary operation—an ideal set for dimensional control in a factory, toolroom, workshop, or metrology laboratory. Cedow Rdgnepfx Ac Negn Micrometer technical specifications: • Range: 0–25 mm • Accuracy: 0.001 mm • Dial readout – fast and unambiguous readings • Precision engineered – solid head, stable micrometric scale • Brand: ORION (renowned manufacturer of measuring instruments) Measuring stand: • Stable cast iron base • Two-point adjustment • Enables repeatable measurements without handheld operation Set ready for use Very good condition – well-maintained, fully functional, smooth and precise measurements

Condition: excellent (used), Professional Mitutoyo surface roughness tester designed for precise measurements in quality control, measurement laboratories, and in manufacturing environments. This is an industrial metrology-grade device, widely used in the automotive sector, CNC machining, toolrooms, and metalworking facilities. Cgodeyc Rwdopfx Ac Nen The 178-562-11D model enables fast and repeatable measurement of roughness parameters in compliance with current standards. Robust construction, intuitive operation, and high measurement accuracy are features for which the Mitutoyo brand is known. Technical condition: used, fully functional Visual condition: very good (as shown in the photos) Power supply: rechargeable battery Manufacturer: Mitutoyo (Japan) Included: • Mitutoyo 178-562-11D surface roughness tester • Transport case • Full set exactly as shown in the pictures

Condition: new, The FPK 6.3 is a highly versatile Conventional Vertical Milling Machine, ideal for Toolroom Milling Machines, and an essential addition to any mechanical production environment focused on tool and mold making. This compact yet robust machine features a premium cast-iron column for maximum dynamic rigidity and constant precision. Operators will appreciate the ergonomically arranged controls, swivelling control panel, and digital position indicator, which enhance usability. With precise preloaded ball screws on all axes, an automatic feed system with rapid feed, and an infinitely variable main spindle drive, it ensures efficient operation and precision. The large work table and generous travel dimensions further support its versatile applications. Included with the FPK 6.3 is an extensive accessory package alongside standard equipment such as electronic hand-wheels and a central lubrication system. Experience the robust performance of KNUTH's FPK 6.3 and consider ordering online to elevate your milling capabilities today. Cjdpfx Aceqhkm Se Negn

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 54 m/min, rapid traverse Y-axis: 54 m/min, rapid traverse Z-axis: 54 m/min, feed length X-axis: 700 mm, feed length Y-axis: 400 mm, feed length Z-axis: 330 mm, nominal power (apparent): 10 kVA, controller manufacturer: Fanuc, controller model: Series 16i-MB, workpiece weight (max.): 250 kg, table width: 410 mm, table length: 850 mm, table load: 250 kg, overall weight: 2,200 kg, spindle speed (max.): 20,000 rpm, spindle nose: BT30, number of spindles: 1, number of slots in tool magazine: 21, tool length: 200 mm, tool diameter: 80 mm, tool weight: 2,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, Fanuc Robodrill Alpha T21iDL 3-Axis Machining Centre BT30 | 20,000 RPM | 21-Tool ATC | Includes Tool Holders Cgsdpfx Aceyfiave Njn Fanuc Robodrill Alpha T21iDL 3-Axis Machining Centre with Fanuc 16i-MB control. 20,000 RPM BT30 spindle, 850×410 mm table, 21-tool ATC, includes tool holders. High-speed precision CNC available now. Manufacturer: Fanuc Model: Alpha T21iDL Machine Type: 3 Axis Vertical Machining Centre Year: 2004 Control: Fanuc Series 16i-MB Condition: Very Good We are pleased to offer this Fanuc Robodrill Alpha T21iDL 3-Axis Vertical Machining Centre, a high-speed, high-accuracy CNC machine renowned for its exceptional reliability, fast cycle times, and compact footprint. Equipped with a 20,000 RPM BT30 spindle, Fanuc CNC control, and 21-station automatic tool changer, this Robodrill is ideal for precision machining, high-speed milling, aluminium work, and small component production. Key Specifications General Manufacturer: Fanuc Model: Alpha T21iDL Type: 3-Axis Vertical Machining Centre Control: Fanuc Series 16i-MB Axis Travels X Axis: 700 mm Y Axis: 400 mm Z Axis: 330 mm Table Table Size: 850 × 410 mm Maximum Table Load: 250 kg (uniform) Spindle Spindle Speed: Up to 20,000 RPM Spindle Taper: BT30 Spindle Speed Ranges: 150 – 12,000 rpm: Max tool Ø80 mm 12,000 – 15,000 rpm: Max tool Ø60 mm 15,000 – 20,000 rpm: Max tool Ø45 mm Toolchanger Automatic Tool Changer: 21 Tool Stations Maximum Tool Weight: 2 kg per tool Total tool weight: 23 kg Maximum Tool Length: 200 mm Maximum Tool Diameter: 80mm Rapid Traverse X / Y / Z Rapids: Up to 54 m/min Operating Hours Cutting Time: 14,654 hrs (correct at time of advertising) Machine Weight: 2,200kg Features & Equipment Fanuc Series 16i-MB CNC control High-speed 20,000 RPM BT30 spindle 21-station Automatic Tool Changer Includes 21 tool holders Compact, rigid Robodrill design Extremely fast rapids and tool changes Ideal for lights-out and high-speed production Please Note No vices included with the machine Includes 21 x BT30 Tool Holders Ideal Applications High-speed aluminium machining Precision small component manufacturing Electronics, medical & automotive parts Toolroom & production environments The Fanuc Robodrill Alpha T21iDL is widely recognised as one of the most reliable and fastest small-format machining centres on the market, offering outstanding accuracy and productivity with minimal footprint. Notes: *Specifications are given in good faith but not guaranteed*

Condition: reconditioned (used), Year of construction: 1987, Universal toolroom milling machine DECKEL FP 1 Cjdjpxm Anjpfx Ac Negn With 3 axes active digital display Heidenhain TNC 113 Year of manufacture: 1987 Travel: X 300 Y 160 Z 340 Speed range: 40 - 2000 rpm With the following accessories: Universal table 600 mm x 250 mm clamping surface Movable vertical milling head Extendable drilling spindle sleeve Stepless feed via potentiometer 1 pcs. Machine vice 1 pc. Counterholder with counterbearing 1 pc. Milling arbor long 0 22 mm Various tool holders S 22 x 2 Bellows Z axis Machine light Automatic central lubrication pump Chip collecting plate Coolant device Operating instructions THE MACHINE IS IN A VERY GOOD CONDITION !!!

Condition: new, functionality: fully functional, Year of construction: 2026, The high-performance CBN borazon grinding wheel designed for the CORMAK DG20M drill sharpener is a key component ensuring precise sharpening of drills made of HSS high-speed steels and cobalt steels. It offers exceptional durability and accuracy essential in daily operations of toolrooms, mechanical workshops or maintenance departments. Main advantages of the DG20 grinding wheel High hardness and thermal resistance thanks to the CBN (borazon) abrasive material. Compatibility with the CORMAK DG20M sharpener – a wheel designed for this model guarantees perfect fit and maximum efficiency. Vibration-free operation due to precise balancing – reduces the risk of tool damage and improves user comfort. Long service life – significantly reduced replacement frequency and lower operating costs. Stable geometry – no need for frequent shape correction, enabling consistent sharpening quality. Construction and technology The grinding wheel for the CORMAK DG20M drill sharpener is manufactured with CBN technology – borazon is one of the hardest abrasive materials known, ideally suited for machining high-speed steel tools. Thanks to precise workmanship and an optimised profile, the wheel ensures high sharpening efficiency while minimising material loss from the tool. Precision and work efficiency The use of an original CBN wheel in the CORMAK DG20 model provides excellent results even during long operating cycles. The wheel maintains an accurate point angle (within 90–135°), which affects cutting quality, reduces cutting forces and increases the service life of sharpened drills. Its vibration-damping properties minimise the risk of micro-chipping on cutting edges. Choose quality – select the original DG20M grinding wheel Cgedoycq Hrspfx Ac Nen The CBN wheel for the CORMAK DG20M sharpener is an essential component for anyone who expects precision and reliability during drill sharpening. Thanks to its construction, material and perfect fit to the machine, it delivers long-lasting, efficient and repeatable operation. Order the original wheel today and keep your sharpener in full working condition.

Condition: new, Year of construction: 2026, Drill Vice 100mm IW100 is a precision, load-resistant vice for drilling and milling machines, designed for stable clamping of workpieces during drilling, light milling and fitting operations. The cast steel body provides high rigidity, while the ergonomic base with four mounting slots enables quick and repeatable positioning on machine tables. Main advantages of the IW100 drill vice Increased rigidity thanks to a monolithic cast steel body. Precise jaw guidance ensuring stable holding of workpieces during machining. Wide 100mm jaws allow clamping of various workpiece sizes. Maximum opening of 105mm increases versatility of use. Multi-point mounting – base with four elongated grooves for quick and secure positioning on a workbench. Wear resistance even under intensive use. Construction and manufacturing technology The IW100 drill vice series uses a solid cast steel body, providing excellent stability and resistance to vibration generated during drilling or light milling. The jaws are linearly guided, ensuring parallel alignment and consistent positioning. The base features grooved mounting surfaces and four elongated slots, allowing precise setup on bench drills, conventional milling machines and metalworking tables. Precision and performance The IW100 drill and milling vice minimises play and unwanted deformation, ensuring smooth tool movement and high dimensional accuracy. Stable clamping of the workpiece shortens setup time, supports machining repeatability and reduces errors caused by improper positioning. Applications The 100mm drill vice is suitable for use in: mechanical and metalworking workshops, maintenance departments, toolrooms, operations such as drilling, counterboring, tapping and light milling. Codeycqfzjpfx Ac Njgn This versatile vice for drills and milling machines is intended for users seeking stability, precision and long-term durability. Standard equipment Cast steel vice body Set of clamping jaws Base with four elongated mounting slots Lead screw with handle Technical data – Drill Vice IW100 Jaw width 100mm Jaw height 20mm Maximum opening 105mm Mounting hole spacing 133mm Mounting hole width 13mm Body material cast steel Base grooved, 4 elongated mounting slots

Condition: new, Year of construction: 2026, Drill Vice 125mm IW125 is a precise and robust vice for both drilling and milling operations, designed for stable clamping of components in demanding machining processes. The cast steel body guarantees excellent rigidity, while the wide jaws and large opening allow flexible operation with components of various sizes. The grooved base with four elongated mounting slots enables quick installation and reliable positioning on the machine table. Main advantages of the IW125 drill vice Wide 125mm jaws for stable clamping of larger workpieces. Maximum opening 125mm – suitable for a wide range of components. Cjdpfx Aceycqd Ds Nsgn Cast steel body ensuring high resistance to bending, vibration and dynamic loads. Precise jaw guidance minimising the risk of displacement during machining. Grooved base with four elongated mounting slots for quick and repeatable installation on machine tables. Wear resistance even under intensive industrial use. Construction and manufacturing technology The IW125 drill vice is made of high-quality cast steel, characterised by excellent mechanical strength and resistance to deformation under load. The body design ensures optimal rigidity during drilling and light milling operations. The jaws are guided along ground surfaces, maintaining parallelism and repeatable clamping. The durable lead screw ensures smooth clamping action, minimising axial play and allowing precise adjustment of the clamping force. Precision and performance The precision of manufacture directly translates into machining stability. The rigid construction reduces vibration, improving surface quality, dimensional accuracy and tool life. With a large jaw opening and parallel guidance, the IW125 vice enables fast setup, reducing the need for additional clamps. This results in higher productivity and consistent machining results. Applications The IW series drill vices are designed for professional workshop use. The IW125 model is ideal for: metalworking and mechanical workshops, toolrooms and prototype departments, small-batch and series production operations, drilling, tapping, counterboring and light milling operations. This versatile vice for drills and milling machines is designed for users seeking long-lasting precision and reliability. Standard equipment Cast steel vice body Hardened jaws Lead screw with handle Grooved base with four elongated mounting slots Technical data — Drill Vice 125mm IW125 Jaw width 125mm Jaw height 24mm Maximum opening 125mm Mounting hole spacing 155mm Mounting hole width 13mm Body material cast steel Base grooved, 4 elongated mounting slots

Condition: new, Year of construction: 2026, The RD700 VARIO is built on a solid column structure that ensures stability and vibration resistance. The radial arm enables precise head positioning from 300 to 700 mm relative to the column, while a quill stroke of 130 mm allows comfortable drilling in one setup. Key Components Spindle: Morse taper MT3 with drawbar, stepless speed control, maximum drilling capacity 32 mm. Feed system: Automatic spindle feed with three ranges, integrated with tapping mode. Main motor: 1.5 kW, 400 V, designed for continuous operation. Table and base plate: 250×250×250 mm cube table and 900×620 mm work plate with T-slots. Precision and Performance With stepless speed regulation and digital indicators, the RD700 VARIO guarantees high machining accuracy and repeatability. The automatic feed and tapping mode reduce cycle times, while the rigid construction minimises vibrations and extends tool life. Applications The CORMAK RD700 VARIO radial drilling machine is ideal for mechanical workshops, toolrooms, production plants, and maintenance departments. It is perfect for machining steel elements, welded structures, machine parts, and industrial components. Standard Equipment Cube table Base Drill chuck 3–16 mm / B18 Mandrel MT3 / B18 Reducing sleeve MK3 / MK2 Cooling system Tapping mode Digital spindle speed indicator Digital drilling depth indicator Adjustable height guard Basic tool set Safety guards User manual CE certification Technical Data *The price quoted is for the machine itself, excluding optional/additional equipment, installation, transport and training— please contact our consultant for more details. Parameter Value Maximum drilling capacity 32 mm Maximum tapping capacity M22 Spindle taper MK3 Minimum spindle speed 75 rpm Maximum spindle speed 2,500 rpm Speed change Stepless (75–438 / 438–2,500) Automatic feed range (3) 0.08 / 0.14 / 0.22 mm/rev Spindle–column distance 300–700 mm Spindle–table distance 0–430 mm Spindle–base plate distance 175–680 mm Vertical arm travel 505 mm Horizontal head travel 400 mm Quill stroke 130 mm Column diameter 150 mm Cube table size 250 × 250 × 250 mm Csdpfx Ajyccn Usc Nsgn Base plate work area 900 × 620 mm Motor power 1.5 kW Power supply 400 V Width 1,220 mm Depth 640 mm Height 1,750 mm Weight approx. 722 kg