Used Eisele Vms 1 for sale (122)

Year of construction: 1969, condition: good (used), machine/vehicle number: 1130, disk of circular saw-Ø: 315 mm cutting area at 90° round: 90 mm Iodpfed Rxw Sox Aa Eoaw cutting area at 90° square: 100 x 60 mm cutting speed: 17/34 m/min engine: 380 V, 1,8/2,6 kW space needed: 1200 x 860 x 1850 mm weight: 720 kg

Year of construction: 1979, condition: good (used), machine/vehicle number: 2001, disk of circular saw-Ø: 400 mm cutting area at 90° round: 95 x 240 mm cutting area in mitre at 45° round: 75 x 180 mm disk rotations: 10,5 u. 21 upm engine: 380 V, 2,6/3,2 kW space needed: 1500 x 1100 x 2150 mm Isdpfx Aasfnrw Sj Ejaw weight: 630 kg

Condition: good (used), Year of construction: 1980, functionality: fully functional, Type VMS III - PV Machine No. 8518 Year of construction 1980 Technical data : 2-stage saw motor 2.0 / 2.6 kW Saw blade 350 mm 4 cutting speeds 8.5 / 17 / 34 / 68 rpm Iajdey Dcmbepfx Aa Eew Clamping range, flat / round 200 / 120 mm Feed length, single stroke 5 - 600 mm Feed length, double stroke 1200 mm

Condition: used, Year of construction: 1998, dimensions of saw-blade 350 x Ø 40 x 3 mm cutting range 120 mm capacity 90 degrees: square 100 x 100 mm capacity 90 degrees: flat 170 x 100 mm capacity 45 degrees: round 120 mm capacity 45 degrees: square 95 x 95 mm capacity 45 degrees: flat 120 x 100 mm capacity 60 degrees: round RE 100 mm capacity 60 degrees: square RE 85 x 85 mm capacity 60 degrees: flat RE 85 x 100 mm work height max. 900 mm saw blade turning speeds 17 / 34 U/min compressed air 6.0 - 8.0 bar total power requirement 1.4 / 1.9 kW weight 340 kg range L-W-H 1010 x 765 x 2175 mm Furnishing : - semi-automatic vertical cold circular saw - pneumatic quick clamping device - Infinitely adjustable saw blade feed - Comfortable miter adjustment - Convenient stroke adjustment of the saw unit via clamping levers - Generously sized gearboxes - with Eisele rotation compensation for a long saw blade service life - Convenient saw blade change - High productivity with the smallest footprint (less than 1 m²) - Machine base Iaodoxabk Ujpfx Aa Ejw - Operation manual (PDF) Machine with factory new spare parts (installed): 1x cylinder Pneu/HydrDoppelw.D80HUB190 for saw blade lowering 1x gas spring Hub100 D23 F=800N for safety hood

Condition: used, Year of construction: 1979, cutting diameter 440 mm weight of the machine ca. 780 kg +++++ Iedpfx Aasf Dwa Ue Eoaw Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: new, Available from stock / available in the short term! Speed: 17/34 rpm. For saw blades up to 350 mm in diameter. With pole-changeable three-phase motor, 1.4/1.9 kW, stationary base frame with integrated coolant system and chip drawer. Cutting range: Flat 90° 170 x 100 mm Flat 45° 120 x 100 mm Flat 30° 85 x 100 mm (only to the right) Square 90° 100 mm Square 45° 95 mm Square 30° 85 mm (only to the right) Round 90° 120 mm Round 45° 120 mm Round 30° 100 mm (only to the right) Technical data: Length 895 mm Width 665 mm Height 1750 mm Weight 300 kg Table height 900 mm Options: Iajdpollvpwefx Aa Eew Roller conveyors and length measuring devices (image = example, available in manual and automated versions, upon request) We recommend our coolant concentrate, which has been tried and tested for "Eisele" saws for decades, our microspray oil (for machines with a microspray system), as well as high-quality circular saw blades and band saw blades for your specific needs. Feel free to contact us for a non-binding quote!

Year of construction: 2001, condition: used, Profile height: max. 150 mm Profile width: max. 300 mm Milling area: 365 x 230 mm Pneumatic workpiece clamping Minimum quantity spray device Iajdpfx Aezmhqzea Eew 2 pneumatic copying pins with copying pin 5/ 8/ 10 mm

Condition: excellent (used), Year of construction: 2011, Behringer Eisele HCS 160 MF including sorting and feed magazine, air filtration system, and much more. The machine will arrive at the end of August and will then be refurbished. Iodpfxszhki As Aa Esaw The photos show the original condition.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, High-performance automatic sawing machine / Brand: PRESSTA-EISELE Type: Profilma 510 / Year of construction: 09/2008 Description: * High-performance automatic sawing machine with fully automatic operation, * Very high cutting accuracy, * Low cycle times, * Burdere-free sawing, * High reliability, * Low maintenance Suitable for aluminum and plastic, for cutting large quantities of small parts, length tolerance 1/10 mm. The automatic sawing machine can be inspected and tested by appointment. Previous use: Used for cutting corner connectors. Condition: Very well maintained, used, ready to use. Technical specifications: - Saw motor: 7,5 kW, S6 - Speed: 2.000 - 3.500 rpm - Cutting speed: up to 92 m/s - Material feed length: up to 1.000 mm / 5-fold reversal possible - Section length: from 8 mm depending on profile - Remaining piece length: from 90 mm depending on section length - Working pressure: 6 - 8 bar - Power supply: Standard: 400 V, 50 Hz - Weight: 1.750 kg - Dimensions Length/Depth/Height: 2.700 x 1.400 x 2.300 mm Equipment: - Control via Siemens S7 panel - Fully automatic bar feed - Roller conveyors - Extraction - Chip bunker Iaodsw D T Uiopfx Aa Eow - Various accessories - CE marking There is no guarantee for correctness and completeness of the technical details and accessories.

Condition: excellent (used), Year of construction: 1995, Like-new pneumatic punch / stamping press from a training workshop, with a base frame. Punching force: 5 t Double strokes/min at max. stroke: 30 Stroke length: 40 mm Installation height: 240 mm Iajdpfx Aajzcpv Se Eow Overhang: 110 mm Table size: 250 x 200 mm Operating pressure: 10 bar Dimensions L x W x H: 250 x 370 x 1450 mm Weight: approx. 100 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Year of construction: 1979, condition: used, saw blade diameter 450/500 mm cutting diameter mm stroke mm total power requirement 3,6 kW weight of the machine ca. 1130 t dimensions of the machine ca. m Iedpsilfp Nefx Aa Eeaw - Circular saw - semiautomatic - hydraulic

Year of construction: 1988, condition: excellent (used), Hydropneumatic intensifier Foot valve operated Iasdofitbwopfx Aa Eew Max. daylight = 280 mm Dimension 60 x 850 x 1500 mm Weight 300kg

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, for processing aluminum and steel profiles with 1 vertical milling motor, 1.1 kW drive, 220/240 V, 50/60 Hz Speed: 7,000 – 11,000 rpm 2 pneumatic indexing pins, with indexing pin 5/8/10 mm Pneumatic workpiece clamping: 2 horizontal clamping cylinders 1 pneumatic spray nozzle Ijdpfjy S Aa Djx Aa Eoaw Milling area, length/depth: 365 x 230 mm Profile height max. 150 mm, profile width up to 300 mm Operation via switch and 2 hand levers

Condition: excellent (used), Length: 2100 mm 7 rollers, width: 200 mm Rollers-Ø 40 mm Iaedeiraqijpfx Aa Eew

Year of construction: 2019, condition: excellent (used), functionality: not functional, Compact hydraulic C-frame punching machine with 160 kN punching force for precise applications on smaller profile cross-sections. The torsion-resistant frame design ensures accurate punching in aluminium, steel or plastic. Ijdsy Agqnjpfx Aa Eoaw

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Fully automatic operation Drive 7.5 kW, S6, 400 V, 50Hz, 2850 rpm For use with saw blades D 550 mm Cutting range 270x140 mm (width x height), D 185mm Max. profile width 270mm Control unit with display Including piece counter Including reversing device for a maximum cut length of 3000mm Automatic shut-off via limit switch when material ends Iajdpfx Aajyvtyvo Eow Hydropneumatic saw blade feed, continuously adjustable, from bottom to top Vertical and horizontal clamping units, on both infeed and outfeed sides of the saw head Pneumatic dosing spray device Cutting gap extension on both sides of the saw blade Electronic material feed unit 3-600mm feed length, with ball screw spindle and servomotor Including pneumatic horizontal and vertical clamping device Remnant piece from 75mm, depending on profile 2 extraction ports D 100 mm Safety guard over the saw head and feed unit A suitable extraction system can also be offered!

Condition: good (used), Year of construction: 1990, machine/vehicle number: 2455, Offer 25293 Technical data: - Max. profile height up to 160 mm - Max. profile width 100 mm - Repetition stroke 100 mm - Punch stroke 20 mm - Punching force at 6 bar: 35 kN - Operating pressure: 6 – 8 bar Iedpoxdh Uzefx Aa Eoaw - Air consumption per cycle approx. 30 l - Equipped with: - Foot switch - 2 vertical pneumatic hold-down devices - Adjustable punching heads - 2 swiveling support arms - Required space approx. W 980 x H 1400 x D 800 mm - Weight approx. 180 kg

Condition: used, Year of construction: 2008, Behringer Eisele HCS 150, year of manufacture 2008, feed magazine, cut-off disposal. The machine is operational and can be purchased in its current condition or fully reconditioned by us including assembly. Type: HCS 150 Machine number: Type no.: 49600H0024 Iodpfjxpd D Nex Aa Esaw Year of manufacture: 2008 Weight: 4,500 kg Required space: 9.3 m x 7.5 m Control: Siemens PLC control Round material (max.): Ø 150 mm Flat material (max.): □ 135 mm Saw blade feed: 0.5 - 40 mm/min Compartments incl. roller conveyor: 11 units Single compartment load: max. 500 kg at 3 m bar length Total load capacity: 4,000 kg Conveyor manufacturer: Geppert Conveyor length: 1,500 mm Conveyor width: 400 mm Conveyor speed: 6.3 m/min Total power requirement: approx. 34 kW Voltage: 400 V Air connection: 6 Bar

Condition: used, Max. punching force: 100 kN Adjustable stroke, max. 50 mm Stroke activation via foot switch Iaodpfxoxrmz Ao Aa Esw Weight: approx. 600 kg

Condition: excellent (used), Year of construction: 2007, Complete saw line consisting of loading unit, fully automatic circular saw, and unloading unit. Suitable for a wide range of applications, especially in the photovoltaic and automotive industries. Loading Unit: - Horizontal loading magazine model HLM - 4-strand timing belt conveyor - 6 compartments, each 285mm wide, for profile feeding - Maximum material height according to the saw cutting area; round material up to max. diameter 130mm - 3 sliding strips between timing belts as additional support - Profile length min. 2,700mm, max. 6,500mm Saw: - Fully automatic circular saw Pressta-Eisele model PROFILMA 510 E-SA - Saw blade diameter max. 500mm - Continuously variable speed adjustment - Hydro-pneumatic saw blade feed, infinitely adjustable, from rear to front - Siemens S7-300 control system with touchscreen - Reversing device with five-fold stroke up to max. 5,000mm - Electric material feed 3 – 1,000mm (single stroke) - Cutting gap extension on both sides - Pneumatic unloading slide - Scrap flap after saw for offcuts / remains - Cut length depending on profile, from 8mm - Menzel minimum quantity lubrication system - Clamping pressure regulation - Two extraction nozzles for chip extraction Unloading: - Table size 1,500mm x 2,500mm Iaedpfx Aoxvbvvja Eew - Pneumatic cross pusher

Year of construction: 2017, condition: excellent (used), functionality: fully functional, machine/vehicle number: 9588, Reconditioned Production Ready！ Ref Code:1027 Iajdpjzlaucofx Aa Ejw Prisma 600 Saw blade diameter vertical: 600 mm Saw blade diameter horizontal: 500 mm Notching width: at 90° processing of profiles up to 300 mm, pointed mitres up to 30° Profile height max. 280 mm Notching depth: at 90° horizontally up to 185 mm / at 90° vertically up to 230 mm Material stop: swivel 30° - 90° - 45° Swivelling material stop with detent points and digital display Latch height motorized adjustable with digital display Motorized adjustment of angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material tensioners Coolant lubrication

Condition: used, Motor: 3.0 kW Cutting height: 80 mm Swiveling function, no vice required Isdpfezkl U Sox Aa Esaw Location: Nattheim

Condition: new, Circular saw automation system Profilma 502, representative of the diverse "Profilma" series ideal for window and facade construction, automotive industry, machine and plant engineering, photovoltaics/solar, etc. Iodpfx Ajzlr Rcea Eoaw • for aluminum and plastic profiles • fully automatic operation • Siemens S7 control with touch display, including piece counter • Error diagnosis including IXON router for VPN connection • Batch multiplier for the use of material bundles • Cycle time indication in seconds • for use with Ø 550 mm saw blades • Drive 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm • motorized saw feed, sawing cut from below • Cutting splitter extension on both sides of the saw blade • Material feed unit with ball screw spindle and servomotor • Feed length: 3 - 800 mm • Feed slide with adjustable support roller • Reversing mechanism up to a section length of max. 4.0 m • Automatic shutdown via limit switches at the end of the material • Remnant piece from 75 mm (depending on the profile) The basic machine is also available as a sawing, drilling, and threading automation system or as a sawing and punching automation system. They complete your orders quickly and efficiently with precision and high production volumes. Further circular saw automation systems are also available for larger profile dimensions or cost-intensive workpiece materials, and are part of the proven Pressta-Eisele standard range. Based on your processing requirements, we will be happy to advise you!

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,809 h, total width: 2,000 mm, total height: 1,800 mm, overall weight: 1,650 kg, controller manufacturer: SIEMENS, controller model: S7 with SIMATIC HMI Touch Panel, product length (max.): 2,400 mm, Circular Metal Saw manufactured in 2023. This PRESSTA EISELE PROFILMA 502 features a powerful 7.5 kW saw drive with a maximum saw blade speed of 2,850 rpm. It offers a cutting capacity of 270 x 150 mm and a maximum profile width of 270 mm. The machine includes a Siemens S7 control system with a touch panel for enhanced operation. If you are looking to get high-quality cutting capabilities, consider the PRESSTA EISELE PROFILMA 502 machine we have for sale. Contact us for further details. Technical Specifications • Saw Drive Power: 7.5 kW (7,500 W) • Duty Cycle: S6 • Saw Blade Speed: Max. 2,850 rpm • Power Supply: 400 V, 3-phase, 50 Hz • Current Consumption: 16 A • Operating Pressure: 6–8 bar Cutting Capacity • Maximum Cutting Width: 270 mm • Maximum Cutting Height: 150 mm • Maximum Cutting Diameter: 270 mm • Maximum Round Material Capacity (90°): 190 mm • Maximum Profile Width: 270 mm Iaedezi S R Ropfx Aa Eew • Section Length Range: 3–4,000 mm • Minimum Remnant Length: From 75 mm (depending on profile) Saw Blade • Saw Blade Diameter: Ø550 mm • Saw Blade Bore: Ø40 mm Control System • PLC: Siemens S7 • HMI: SIMATIC Touch Panel • Controller: CPU 315 • Safety System: Flexisoft • Functions: • Piece counter • Batch multiplier for bundle processing • Cycle time display • Chain dimension management • Fault diagnostics Connectivity • Remote Access: IXON router with VPN connection Material Feed System • Drive Type: Electronic servo drive • Feed Stroke: 800 mm • Drive Mechanism: Ball screw spindle • Maximum Profile Length: 4,000 mm • Feed Support: Lift/lower roller support Saw Feed • Feed Type: Motorized • Feed Adjustment: Stepless • Cutting Direction: Bottom to top Clamping System • Type: Pneumatic horizontal and vertical clamping • Clamping Position: Feed and discharge sides • Pressure Control: 6 individual pressure regulators Lubrication • Lubrication Type: Intermittent spray system • Reservoir Capacity: 1 L • Features: • Level monitoring • Automatic shut-off Safety Features • Complete safety enclosure • Sound-insulated machine frame • Automatic machine shut-off at end of material stock • Cutting gap extension to protect cut surfaces Material Support • Infeed Conveyor: 740 mm roller conveyor with intrusion guard • Outfeed Table: 450 mm Pertinax support table with intrusion guard Extraction • Extraction Ports: 2 × Ø100 mm Chip Extraction Unit • Model: MG 3 (Italyvacuum Vortex 58 FT) • Year of Manufacture: 2022 • Motor Power: 3 kW • Voltage: 400 V / 3~ (±5%) • Current Consumption: 7.2 A • Weight: 130 kg • Features: • Integrated cyclonic separation system • Contactless antistatic system Additional Information • Machine can be inspected under power.

Condition: used, Miter saw for aluminum, EISELE, Type LMS II HVG-225 Machine no. 0107, year of manufacture 1980 Cutting range: 90° = 150 x 100 mm 45° = 120 x 100 mm Saw blade diameter: max. 400 mm Miter cut: +/- 45° Saw blade speed: 1700 / 3400 rpm Motor power: 1.4 / 1.9 kW Power supply: 380 volts, 50 Hz Table size in front of the stop angle: 580 x 350 mm Iedpszinzrsfx Aa Ejaw - Motor type RF 1.5 / 4 / 2-7 - Saw unit for shifting cut, tiltable 45° to the left - Machine equipped with a saw blade for aluminum, Ø 400 mm - Hose connection for chip extraction, Ø 80 mm - Sturdy metal base Space requirement (L x W x H): 1050 x 1020 x 1700 mm Weight: 150 kg In good condition