Used Edge Trimmer for sale (4,112)

Condition: used, Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container -With the premelting device, you always have enough hot melt adhesive available -Manufacturer: ENA -Type: 4-060-15-0600 -electrically heated -Dimensions: 470/175/H385 mm Lodpfod Dt Rzox Ad Norg -Weight: 20.3 kg

Condition: used, Double end profiler, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -on dovetail guide, cross table -With guide for cutting veneer edges Lsdpfob A Sy Hsx Ad Nerg -Power: 0.15 kW 11160 rpm at 200 Hz -Power: 0.22 kW 17250 rpm at 300 Hz -Voltage: 133/200 volts -Admission: -Tool: Ø 150 mm -Dimensions: 560/220/H240 mm -Weight: 16 kg

Condition: used, Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 1.05 kW 18000 rpm at 300 Hz -Voltage: 165 volts -Take shaft: Ø 16 mm -Tool: Ø 70 x 25 mm -Dimensions: 285/60/H140 mm Lrodpfxob A Tbme Ad Nog -Weight: 3.6 kg

Condition: used, Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor Ljdpsb A Tb Ssfx Ad Njrg -Power: 0.15 kW 11160 rpm at 200 Hz -Power: 0.22 kW 17250 rpm at 300 Hz -Voltage: 133/200 volts -Take shaft: Ø 15 mm -Tool: Ø 150 x 3.0 mm -Dimensions: 200/85/H70 mm -Weight: 2.5 kg

Condition: used, Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.15 kW 11160 rpm at 200 Hz -Voltage: 133 volts -Take shaft: Ø 15 mm -Tool: mm Lrjdsb A Tcaepfx Ad Njg -Dimensions: 190/70/H85 mm -Weight: 1.8 kg

Year of construction: 2002, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 226 / 2002 - 08, 10 face grinding supports 2 upper chamfer units 2 lower chamfer units Lredpfx Ajx Tvtmod Neg 1 drip edge support 1 table extension console 1 infeed roller conveyor 1500 mm 1 outfeed roller conveyor 1500 mm Total length of the machine incl. roller conveyors approx. 9600 mm Feed direction from right to left

Year of construction: 1994, condition: good (used), Double-end tenoner, edge processing machine, flush cutter, edge cutter, spindle motor, milling motor -Manufacturer: Paul OTT, milling unit from edge banding machine U 206 -Milling motors: Stephan type ZBXD90L20-2 gearbox BMB 46 Lredsu Scpqjpfx Ad Njg -Power: 2.2 kW -Speed: 12155 rpm -Cutter width: 30 mm -Adjustment range: 0 - 70 mm -Dimensions: 460/370/H570 mm -Weight: 89 kg

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Power: 3.7 kW 2885 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz Lrjdjb A Hn Sjpfx Ad Nog -Gear ratio: 1:2.5 -Voltage: 220/380 volts -Receiving shaft: Ø 30 mm -Tool: Ø 153 x 117 mm -Dimensions: 630/400/H200 mm -Weight: 56 kg

Condition: good (used), Double end profiler, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 3.7 kW 5820 rpm at 100 Hz -Power: 3.7 kW 17350 rpm at 300 Hz -Voltage: 220/220 volts -Shaft holder: Ø 24 mm -Dimensions: 355/125/H210 mm Lredpfx Adecfihfs Neg -Weight: 20 kg

Condition: used, Year of construction: 2010, The machine operates perfectly; the front glue unit requires cleaning. Lredpfx Aex Hqdmsd Nsg Fully operational Year of manufacture: 2010 Radius scraper Surface scraper Cleaning unit Jointing cutter up to 3 mm Nesting milling unit Pneumatic feed stop Polishing Machine no.: 200.07.011.10

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, workpiece weight (max.): 50 kg, workpiece height (max.): 40 mm, edge thickness (max.): 3 mm, workpiece length (max.): 2,500 mm, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Workpiece thickness: 12 - 40 mm Minimum workpiece size (L x W): 250 x 240 mm Maximum workpiece size (L x W): 2,500 x 1,200 mm Maximum workpiece weight: 50 kg Edging material (roll stock) - Material thickness: 0.4 - 3 mm Lrsdpfxsx Ezz Hs Ad Nog Maximum edge cross-sectional area (plastic): 135 mm Maximum edge cross-sectional area (veneer): 100 mm Maximum roll diameter: 830 mm Longitudinal processing speed: up to 35 m/min for thin edging up to 0.6 mm Longitudinal processing speed: up to 30 m/min for thick edging up to 3 mm Cross processing speed: up to 30 m/min for panel sizing Cross processing speed: up to 20 m/min for edge processing Minimum distance between workpieces: 500 mm MACHINE DETAILS Connected load: 6.6 kW (double planer longitudinal/cross) Standard milling unit: 6.6 kW EQUIPMENT Top/bottom separating agent spray unit Glue application unit A3 with 2 rollers Profile milling unit FF12 top/bottom with motors 12,000 rpm Finishing unit FA11 top/bottom Steplessly adjustable positioning cams with a maximum cam stroke of 25 mm Pre-milling unit: 0.55 kW PUR OTT 2-kg melting station

Condition: excellent (used), Year of construction: 2010, operating hours: 2,560 h, functionality: fully functional, total length: 5,760 mm, workpiece height (max.): 60 mm, edge thickness (max.): 12 mm, height adjustment type: electric, plate height: 60 mm, Brandt 1650 Highflex with Return Conveyor and PU Glue Box, Excellent Condition Year of manufacture: 2010 Operating hours: 2,587 h Lredevnwf Uspfx Ad Neg Total edge length processed: 216,000 m Maximum edging thickness: 12 mm Maximum panel thickness: 60 mm Maximum thickness of roll material: 3 mm Minimum workpiece width: 70 mm Maximum feed speed: 18 m/min Feed speed: infinitely variable Height adjustment: motorized Glue system: granulate Pre-melter BRANDT glue system QUICKMELT KD 2 x PU glue pots Strip magazine Jointing milling unit End trimming unit with 2 motors Flush/radius/bevel stations: 1 Corner rounding unit with 2 motors Scraper unit Profile scraper, flat scraper Buffing unit Aggregates sequenced NC axis/axes Version: right-handed machine Machine length: 5,760 mm Conformity mark: CE Return conveyor: Ligmatech Boomerang PU glue box Still in operation, inspection recommended, available by arrangement No warranty Pick-up only, forklift available Net price edgebander: €26,000 plus VAT Net price panel return conveyor: €7,000 plus VAT Machines can also be purchased separately Price negotiable

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Single-side edge sanding machine Manual conversion from solid wood to veneer sanding Patented device with foldable stops With sanding belt oscillation Manual tilting of the sanding unit 0-45° by scale Motor: 2.2 kW Oscillation stroke: 5 mm Work table: 400 x 1100 mm Sanding belt width: 150 mm Lredpfox Rv Dyox Ad Nsg Extraction connection: 100 mm Footprint: 600 x 1080 mm Weight: approx. 400 kg Availability: short-term Location: Flörsheim

Year of construction: 1993, condition: ready for operation (used), Edging line DK 90 TL Lrsdpox Tp Tmefx Ad Njg In operation until 18.12.2025 Consisting of: Infeed roller conveyor DK90 (incl. various saw sleeves) Slab separator ASV Machine professionally dismantled and ready for loading

Condition: excellent (used), Year of construction: 2014, operating hours: 216 h, functionality: fully functional, machine/vehicle number: 25.12.004.14, - Very good edge banding machine for sale due to new acquisition. - New jointing cutters were installed only 2 months ago. - Low total running meters! - The machine is still in operation and can be tested. - The edge finish is still very good. Equipment: - Jointing cutters up to 2mm - End trimming unit Lsdpex A S N Hjfx Ad Norg - Multi-radius flush trimmer - Profile scraper R2 - Surface scraper - Buffing unit Price includes VAT. Sale without any warranty!! Available from end of January 2026.

Condition: used, Hebrock AKV 3005 edge bander, well-equipped, can be tested before purchase, Liquids before milling units, Lrjdpfsw I Sp Sex Ad Njg Pre-milling cutters, Glue application with roller, equipped with glue drain, Second glue pot included, pneumatic pre-cut guillotine, pressure rollers, final trim saw, milling unit top/bottom, R1 – R2 pneumatically adjustable, profile scraper, corner rounding unit, liquids before scraper, flat scraper, polisher, max edge tape thickness in roll: 3mm, max edge thickness for lipping: 12mm, machine in very good condition.

Condition: excellent (used), Edge bander Holzher Streamer 1057 Pre-milling units Glue application, GLUE JET cartridge glue system Suitable for PUR glue Equipped with glue discharge Pneumatic pre-cut guillotine Pressure rollers Final trimming saws, angle adjustable Lodsxf H Rdjpfx Ad Norg Top and bottom milling units R1, R2 Corner rounding unit Profile scraper Flat scraper Max edge banding height: 45 mm Max edge thickness in roll: 3 mm Machine length: 460 cm Feed speed: 10 m/min

Condition: used, BRANDT highflex 1440 edge bander well equipped, Initial milling cutters glue application pneumatic preliminary guillotine pressure rollers finished cutting saws top-bottom milling unit 2 x finishing unit profile scraper Lrjdpfsv H D S Ssx Ad Njg flat scraper polisher the machine has nc milling cutter control and a pneumatic package max. element height 60mm max. veneer thickness in a roll 3mm max. feed 14m/min the machine is functional, can be tested before purchase

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Unfortunately, no type plate, therefore data approx. -Power: 3.7 kW 2885 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz Ledpfxeb A Hhts Ad Norg -Voltage: 380 volts -Receiving shaft: Ø 40 mm -Tool: Ø 200 x 20 mm -Dimensions: 520/250/H160 mm -Weight: 42 kg

Condition: used, Technical details: height over floor: 930 mm machine weight approx.: 75 +( 27kg Untergestell) kg dimensions L x W x H: 0,6 x 0,48 x 0,43 m EDGE CHAMFERING MILLING MACHINE Application: For chamfering Machine table: WxD: 600 x 240mm with limit stop bar LxH: 400 x 25mm built-in tool: cutter approx. 50mm with 45° milling form Chamfering width approx. 6mm voltage: 380 V Ledpfx Adsu Ngdts Nerg with ON/OFF switch *

Condition: used, Technical details: voltage: 380 V total power requirement: 4,0 kW machine weight approx.: 1270 kg dimensions L x W x H: 1,4 x 1,0 x 1,9 m EDGE CHAMFERING MILLING MACHINE Application: Beveling of circular blanks and flat material -smallest straight edge = 3mm -max. breaking strength of the material = 70 kp/mm (690 N/mm²) -max. feed rate: at 10mm bevel width = 3,1 m/min. at 15mm bevel width = 2,9 m/min. at 20mm bevel width = 2,7 m/min. at 25mm bevel width = 1,5 m/min. with degree adjustment (bevel angle) 25° - 55°. scale for setting the straight edge downholder manual with handwheel cutting wheel size Ø 200mm; teeth fine / medium / rough Lsdpfx Adou Ngfdj Nerg Support block size: D:220 x W:620 x H:350mm; driving wheel approx. Ø 350 x 100mm; display via linear scale *

Condition: used, Technical details: Lrjdou Nggnjpfx Ad Nsg electrics - voltage/frequency: 380 V/Hz total power requirement: 1,1 kW machine weight approx.: 18 kg dimensions L x W x H: 0,32 x 0,50 x 0,25 m EDGE BURRING MACHINE, table-top unit Application: chamfering, deburring Equipped with milling head Ø 65mm with carbide inserts Motor speed 2780 rpm. Workpiece holder via prism 45°, with 2 supports lxw: 500 x 40mm, rotatable 15° - 45° Milling bevel width max. 5.0mm, angle 15° - 45° *

Condition: new, Year of construction: 2025, Professional EBM 360B table edge banding machine. The machine is designed for edge banding of both straight and curved elements. Ideal edge banding machine for medium and large workshops and carpentry shops. Pneumatic shears for cutting the edge (adhesive tape). Solid, strong construction. This machine feeds, cuts and glues the edge. The tape feeding and cutting sensor automatically takes the cut tapes from the container. Easy to use and conveniently placed control panel. Work comfort and failure-free operation of the machine are ensured. The indisputable advantage is the simple construction and intuitive operation. TECHNICAL PARAMETERS Lrsdowl Eaaepfx Ad Njg EDGE WIDTH 10-60 (68) mm EDGE THICKNESS 0.3-3 mm MINIMUM WORKING RADIUS 20mm MAX. PERMITTED CUTTING WIDTH 50 mm HEATING POWER 2 kW POWER SOURCE 400V MOTOR 0.18 kW, 0.37 kW, 0.4 kW FEED SPEED 0-14 m/min. AIR PRESSURE 6 BAR DIMENSIONS 1550 x 800 x 1000 WEIGHT 185 kg

Condition: new, Year of construction: 2025, Edge Sander Description: Sanding of curved materials using a side table. Oscillation allowing optimal use of the entire surface of the belt. Simple and quick sanding belt replacement using a lever. Movable aggregate ensures both horizontal and vertical operation. Additional table with adjustable height included as standard. Tensioning device ensures even sanding belt tension. Compact size of the device with a wide range of applications. Technical Data: Belt size [mm]: 2515 x 152 Worktable size [mm]: 840 x 300 Lrjdpfjvugq Hsx Ad Nog Edge and face sanding at an angle [°]: 0 - 45 Additional table size [mm]: 300 x 250 Table height adjustment [mm]: 80 Side bumper size [mm]: 700 x 60 Maximum sanding length [mm]: 790 Dust extraction port diameter [mm]: 100 Belt speed [m/min]: 980 Motor power [kW]: 2.2 Power supply [V]: 230 Weight [kg]: 138 Note: The price quoted is the net price. It does not include transportation costs.

Condition: new, Year of construction: 2025, Edge Sander Description: Sanding of curved materials using a side table. Simple and quick sanding belt replacement using a lever. Movable aggregate ensures horizontal and vertical operation. Additional table with adjustable height included as standard. Tensioning device ensures even sanding belt tension. Compact size of the device with a wide range of applications. Technical Data: Belt size: 2010 x 152 mm Worktable size: 790 x 221 mm Table height: 810 mm Stand height: 600 mm Additional rounding table size: 514 x 221 mm Maximum sanding length: 790 mm Dust extraction port diameter: 100 mm Edge and face sanding at an angle: 0 - 45° Belt speed: 840 m/min Motor power: 1.1 kW Power supply: 400 V Weight: 75 kg The price quoted is the net price. It does not include transportation costs Lrodpfjvuggzsx Ad Njg