Used Eps for sale (526)

Condition: ready for operation (used), functionality: fully functional, power: 22 kW (29.91 HP), Steam boiler LOOS DF 600kg/h renovation! EPS EXPANDER continuous operation 600kg/h 15g/liter electric power 22KW Dodpfsu U Ad Rox Albjcl EPS bead storage 300 m3

Condition: good (used), For sale: Professional automatic cutting line for EPS (Expanded Polystyrene) blocks. Features & Specification: -Block storage / feeding magazine -Block tilter / inverter -Scrap / waste grinding system (bottom and side) -Horizontal cutting section -Contour / profile cutting section -Cross-cutter section Dodpfezyyfkox Albjcl Control System & Condition: The main electrical and control cabinet has been thoroughly modernized, with most components being -practically new. Controlled by a Siemens Simatic S7-1200 PLC. Maximum Block Dimensions: -Length: 410 cm -Width: 105 cm -Height: 130 cm Line Dimensions: -Cutting line length: 20 m -Block storage length: 6 m -Total straight-line length: 26 m

Condition: excellent (used), Year of construction: 2019, EPS 1050 UV TUNNEL: Maximum sheet size: 1050x780 Maximum stack height: 800 Maximum conveyor speed: 45 m/min. Operating pressure: 6 bar Air consumption: 4 m3/h Maximum power consumption: 20 kW Operating power: 7.5 kW Weight: 950 kg Dimensions: 4250x1700x1100 Dsdpfxozxrdio Albocl

Condition: used, Pressing screw REG-MAC for drying films and fibers, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw Dodszy Hhlspfx Albecl

Year of construction: 2016, operating hours: 20 h, condition: used, functionality: fully functional, machine/vehicle number: MT-108/2016, We are offering a used IPVET EPS/MW Custom Sandwich Panel Production Line, manufactured in 2016. The machine has seen very little use. Manufacturer: IPVET Model: EPS/MW Custom Sandwich Panel Year of Manufacture: 2015 Condition: Used Category ID: 1059 Type: EPS/MW Sandwich Panel Production Line The EPS/MW (Expanded Polystyrene/Mineral Wool) sandwich panel production line is suitable for the manufacture, staging, and packaging of assorted types and sizes of sandwich panels with insulation. The line includes all necessary electrical circuits, hydraulic system, and control units required for operation. The production line is capable of manufacturing the following products: - EPS roof panels with insulating thicknesses: 60mm, 80mm, 100mm, 120mm, 150mm, 200mm - EPS wall panels with insulating thicknesses: 60mm, 80mm, 100mm, 120mm, 150mm, 200mm - MW roof panels with insulating thicknesses: 80mm, 100mm, 120mm - MW wall panels with insulating thicknesses: 80mm, 100mm, 120mm Raw materials used in production: - 0.4-0.7mm x 1250mm pre-painted, galvanized steel sheet - EPS 80 Expanded Polystyrene boards - MW Mineral Wool (Spanrock XL) - Adhesive (polyol) - Adhesive (isocyanate) Machine Units/Equipment included in the Sandwich Panel Production Line: The EPS/MW sandwich panel production line is a comprehensive system consisting of several machines and equipment. The production line comprises the following units: 2.1. Decoiler for external steel sheet with trolley 2.2. Trapezoidal roller conveyor Bobp Ergeyw Tmlocyodf 2.3. Shearing knife for cutting steel sheet 2.4. Micro-corrugation roller conveyor 2.5. Edge-forming roller conveyor for standard joint outer facing 2.6. Edge-forming roller conveyor for concealed joint outer facing 2.7. Decoiler for internal steel sheet with trolley 2.8. Shearing knife for cutting steel sheet 2.9. Micro-corrugation roller conveyor 2.10. Edge-forming roller conveyor for internal facing 2.11. EPS/MW insulation dispenser unit 2.12. Insulation material conveyor belt 2.13. EPS/MW insulation trimming knives 2.14. Adhesive application unit 2.15. Pump 2.16. Adhesive spreading unit Dcsdpfx Asyw Tmlelbjl 2.17. Laminating roller conveyor 2.18. Cutting saw 2.19. Accordion roller conveyor 2.20. Roller discharge table 2.21. Stacking and flipping unit 2.22. Transport trolley for stacking 2.23. Packaging unit 2.24. Chain conveyor unit for material handling If you have any questions or require further information, please send us a message or call us.

Condition: used, mileage: 460,000 km, power: 290 kW (394.29 HP), first registration: 10/2000, overall weight: 26,000 kg, Equipment: ABS, air conditioning, Actros 2640 !!!! GERMAN VEHICLE IN TOP CONDITION !!!!! First registered: 10/2000 460,000 km 6x4 Leaf/air suspension Dcodozyfl Nspfx Albol EPS with clutch - 3 pedals Trailer coupling Meiller tipper body !!!! ONBOARD COMPUTER !!!!! ---- Visit our website: deutsch/english/srpski/hrvatski/bosanski/bugarski..... Goran deutsch/english/p?????/?????..... Roman We will gladly take care of your financing or leasing. EU sale: net price upon presentation of company documents and tax/VAT number. VAT deposit: 2000 €. Our service for you: - Customs license plates - Export documents and EUR1 - Worldwide transport - Overnight accommodation - Transfer from Munich Airport or Passau train station

Condition: used, mileage: 460,000 km, power: 290 kW (394.29 HP), first registration: 10/2000, overall weight: 26,000 kg, Equipment: ABS, air conditioning, Actros 2640 !!!! GERMAN VEHICLE IN TOP CONDITION !!!!! First registered: 10/2000 460,000 km 6x4 Leaf/air suspension EPS with clutch - 3 pedals Djdpfx Aezyfmtslbecl Trailer coupling Meiller tipper body !!!! ONBOARD COMPUTER !!!!! ---- Visit our website: deutsch/english/srpski/hrvatski/bosanski/bugarski..... Goran deutsch/english/p?????/?????..... Roman We will gladly take care of your financing or leasing. EU sale: net price upon presentation of company documents and tax/VAT number. VAT deposit: 2000 €. Our service for you: - Customs license plates - Export documents and EUR1 - Worldwide transport - Overnight accommodation - Transfer from Munich Airport or Passau train station

Condition: used, mileage: 490,000 km, power: 375 kW (509.86 HP), first registration: 08/2013, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, gearing type: semi-automatic, emission class: euro5, Year of construction: 2013, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, * Mercedes-Benz Actros 2651 SZM * First registered: 08-2013 * EPS transmission with clutch * Drive: 6x4 * Retarder * Air conditioning * Adaptive cruise control * Differential lock * Leaf / Air suspension * More pictures and videos available via WhatsApp Dcjdpfezy T Hzex Albol * Specifications are subject to change without notice and prior sale.

Condition: used, Year of construction: 2012, functionality: fully functional, total length: 1,020 mm, total width: 740 mm, ESC ATMACE 710/G: Max print format: 720x1020 Max substrate format: 740x1020 Min. substrate format: 330x480 Max size of the screen printing frame: 1140x1280 Squeegee angle adjustment range: 30 degrees Fit adjustment range: /-10 Manual feed - ¾ auto Max speed - depends on the substrate: 500 sheets/h Power consumption: approx. 3.9 kW Dimensions: length/width/height 2700x2500x1500 year of manufacture 2012 Dcsdpfx Alswnbbxjbol UV TUNNEL EPS SUV 800: Max sheet format: 1050x780 Max stack height: 860 Max conveyor speed: 45m/min. Max power consumption: 14.3 kW Weight: 550 kg Dimensions: length/width/height 4300x1680x1380 year of manufacture 2012 The set additionally: - Station for washing sieves, - grinder for sharpeni...

Condition: used, mileage: 640,000 km, power: 375 kW (509.86 HP), first registration: 03/2012, fuel type: diesel, overall weight: 41,000 kg, axle configuration: > 3 axles, brakes: retarder, gearing type: semi-automatic, emission class: euro5, Year of construction: 2012, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, * Mercedes Benz Actros 4151 V8 Tipper Truck * First registered: 03-2012 * V8 engine * EPS transmission with clutch (3 pedals) * Retarder Dcjdpfjzy T Hnox Albol * Air conditioning * Leaf / Leaf suspension * Trailer hitch * Differential lock * More pictures and videos available via WhatsApp * Information provided without guarantee and subject to prior sale.

Condition: good (used), For sale: - Injection molding machine, EPS pre-expander, automatic line for EPS (expanded polystyrene) box production – thermo boxes, fish boxes – used, in very good condition. The machine is currently still connected to the installation, which facilitates disassembly and labeling of individual connections for the buyer. - Complete machine, ready for connection to steam installation, EPS granulate transport, electricity, compressed air, and cooling system. - Year of manufacture: 2023 - Configurable mold for the production of EPS thermo boxes and fish boxes, 3 sizes, with or without holes, with lids – total of 6 configurations. Complete boxes with lids are produced in a single cycle – no need to change molds. - Set includes intellectual property rights to the box and fish box designs – full documentation provided. IMPORTANT! The machine can also be used to produce EPS construction shapes for walls, ceilings, etc. – see examples in one of the photos. We also have other production line components available. Check our other listings. We also have additional equipment for sale such as: - Injection molding machine, EPS pre-expander, automatic line for EPS foundation boards + mold for boards - EPS batch pre-expander - Steam installation: boiler house – machinery - 3 m³ steam tank - Installation for transporting expanded EPS - EPS silos - EPS crusher - Many spare parts Dsdpjua Dqiofx Albocl Additional photos and information available upon request by email. Option to sell individual components of the set separately.

Condition: like new (used), Year of construction: 2019, operating hours: 20 h, functionality: fully functional, overall weight: 1,069 kg, load capacity: 120 kg, arm reach: 2,701 mm, controller manufacturer: KUKA, controller model: KR C4, teach pendant manufacturer: KUKA, teach pendant model: KUKA SmartPAD, warranty duration: 12 months, Equipment: documentation/manual, KUKA KR 120 R2700-2 with KR C4 – AS NEW / only 19.95 operating hours We offer a KUKA KR 120 R2700-2 industrial robot in as-new condition with KUKA KR C4 controller. Manufactured in 03/2019 with only 19.95 operating hours. Robot specifications - Model: KUKA KR 120 R2700-2 - Payload: 120 kg - Reach: 2701 mm - Year of manufacture: 03/2019 - Operating hours: 19.95 h - Cable set: INT 084ST2700 - Configuration: ES13 133 CTR MB1 PNT EPS AIR - Colour: KUKA Industrial Orange Controller - KUKA KR C4 EU - KSS 8.5 - Servo configuration SC4.1 - 400 V transformerless power supply - Siemens SCALANCE X208 - Parallel Safety interface X11 - Ethernet interface X66 - CSP 2x USB 3.0 - Cabinet base with spacer - Set of 75 mm rollers Installed KUKA software & technology packages - KUKA.PROFINET M/S 4.1 - KUKA.DiagnoseSafety 3.0 The robot is supplied with the complete configuration according to the attached technical specification. 12-month warranty included. CUSTOM CONFIGURATION AVAILABLE The robot can be supplied in its current configuration or customized according to the customer's application and technical requirements. Depending on the application, RSA Systems can provide configuration and installation of suitable KUKA software and technology packages, communication interfaces and fieldbus systems, as well as configuration for external axes and other application-specific requirements. Additional services available on request Installation & commissioning | Programming & optimization | Integration & automation | Custom robot configuration | Technical support | ISO 9283 metrology & calibration | KUKA robot training Djdpozyyynofx Albecl Inspection and functional demonstration of the robot at our facility is possible by appointment. Send us your application and technical requirements and we can prepare the robot configuration according to your project. RSA Systems s.r.o. Experience. Reliability. No Compromise.

Condition: used, Year of construction: 2008, Automatic vertical precision panel saw, - Self-supporting, welded, torsion-resistant frame construction, with hardened guides. - Support rollers with ball bearings, with automatic locking, number: 17 - Automatic movable WOOD workpiece support throughout the cutting area. - Support for small workpieces integrated into the frame. - Closed dust extraction system TRK integrated into the frame. - Divided center support for optimal working height, length: 5.15 m - Saw beam with automatic locking for vertical sawing. - Fine adjustment of the saw motor using a push button. - Automatic locking of the saw motor during horizontal sawing. - Automatic lowering of motor/saw blade. - Automatic pivoting of motor/saw blade. - Back cut: 15 mm - Infinitely adjustable automatic feed rate from: 10 - 25 m/min - SPS control with display, diagnostic system, check control and hour meter. - Powerful, vibration-free motor with motor brake: 7.5 hp - Supersilent system for noise reduction. - Digital measuring system (DMS) for horizontal and vertical sawing. - Switch for support rollers or center support. Quick and easy adjustment of reference dimensions. Switch for strip cutting. - Adjustable measuring accuracy: 1.0/0.5/0.1 mm - Auxiliary fence on profile rail with measuring tape, number: 3 - SPS control with display, diagnostic system, check control and hour meter. - Must be connected to an external dust extraction system and compressed air. Striebig ”CONTROL 6224”, continued… - Incl. mounting kit for wall mounting. - Cutting area: Length: 5300 mm - Height: 2240/2100 mm - Depth: 80 mm Incl. the following optional equipment delivered with the machine: - Scoring unit “VSA” with infinitely adjustable cutting width and automatic on/off function, incl. scoring blade. Dsdpfx Aszy Ik Ujlbocl - Electronic positioning system "EPS", in the horizontal axis. (out of order, needs repair) Available from the beginning of November 2026.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Working area X: 6800 mm Working area Y: 1840 mm 19.2 kW electrospindle with C-axis, 360-degree interpolating torque Number of vertical drilling heads: 30 Number of horizontal drilling heads X: 6 Number of horizontal drilling heads Y: 4 Blade for grooving in the X direction 8-position turret tool changer 22-position chain tool changer Work table with 10 rows, EPS automatic clamping system Numerical control: BH660 Programming software: BiesseWorks advanced 1 vacuum pump with a capacity of 250 m3/h Chip conveyor belt Safety mats Protective screens Approximate weight: 7050 kg Dcodpfezy Hnrox Albjl

Condition: used, functionality: fully functional, mileage: 284,891 km, power: 320 kW (435.08 HP), first registration: 11/1987, fuel type: diesel, empty load weight: 10,960 kg, maximum load weight: 10,750 kg, overall weight: 21,710 kg, tire size: 315/80R22,5, axle configuration: 6x2, wheelbase: 4,500 mm, next inspection (TÜV): 12/2026, fuel: diesel, fuel tank capacity: 300 l, color: red, driver cabin: sleeper cab, gearing type: mechanical, suspension: steel, total length: 8,550 mm, total width: 2,470 mm, total height: 3,400 mm, loading space volume: 16 m³, loading space length: 5,700 mm, Year of construction: 1987, Equipment: ABS, additional headlights, compressor, differential lock, fog lights, power assisted steering, retarder, seat heater, soot filter, trailer coupling, Model: MERCEDES BENZ SK 2244 V8 EPS 6x2/6x4 Robson Pump 2xTank 10 cubic foam tank First registration: 03/11/1987 Mileage: 284,891 km (original) Engine power: 320 kW (435 HP) Water tank capacity: 9.00 m³ Foam tank capacity: 1.00 m³ Water cannon Equipped with ROBSON Drive, switchable to 6x4 drive EPS 3 pedals Auxiliary heater Antennas Radio/Cassette/CD/MP3 Air conditioning Adjustable exterior mirrors Sun visor Work lights Fog lights High beam Djdpfx Aljztfndobecl Hazard warning lights Tow hitch Transmission: Manual gearbox Tank: Diesel (300 liters) Drive configuration: 6x2/6x4 Robson Drive Differential lock Wheelbase between axles 1 and 2: 4,500 mm Wheelbase between axles 2 and 3: 1,350 mm Tire size axle 1 (front): 315/80R22.5 Tire size axle 2 (rear): 315/80R22.5 Tire size axle 3 (rear): 315/80R22.5 Leaf suspension front/rear Wheel arch covers Curb weight: 10,960 kg Payload: 10,750 kg Permissible total weight: 21,710 kg Vehicle overall dimensions (L x H x W): 855 cm x 340 cm x 247 cm Superstructure dimensions (cargo length): 5.70 m With new TÜV and AU upon agreement, extra charge applies! You can also contact us for further information and pictures via WhatsApp, Telegram, Viber, and Signal. We speak German and English, but feel free to send us a message in your language! Trade-in possible! Price is net!!! We can deliver your vehicle directly to the port of Hamburg, Kiel, Bremerhaven/Cuxhaven, Lübeck in Germany or Antwerp/Belgium and Amsterdam. We can ship the vehicle worldwide for you! Export license plates available on request! We support you with export, original data confirmation for country homologation, supplier declaration, preparation of export documents and customs plates production if required. Viewing and test drive possible at any time, including weekends, by prior phone arrangement! Disclaimer: The buyer is responsible for independently verifying the condition, dimensions, and equipment of the goods/vehicles. All information is provided without guarantee. Subject to changes, prior sale, and errors.

Condition: used, mileage: 320,000 km, power: 300 kW (407.89 HP), first registration: 03/2007, overall weight: 18,000 kg, fuel type: diesel, emission class: euro5, Equipment: ABS, air conditioning, all wheel drive, crane, Actros 1841 First registration: km EPS – 3-pedal system Air conditioning Leaf/Leaf – full steel suspension Euro 5 Meiller tipper body Wheelbase: 3900 !!!! 15-ton hydraulic winch !!!!! The winch is mounted on the front plate. Complete municipal hydraulic system with front plate. Crane: Hiab 122 Year of manufacture: 2007 !!! Radio control !!!! 3x hydraulic extension/3x telescopic boom Grab control/oil lines on the front/5+6 control circuits Hook height approx. 13m ---- Visit our website: German/English/Serbian/Croatian/Bosnian/Bulgarian... Goran German/English/…? …? … Roman We will gladly take care of your financing or leasing. EU sales: net price upon presentation of company documents and VAT number. VAT deposit: 2000 € Our services for you: - Customs license plates - Export documents and EUR1 certificate - Worldwide transport Dedpjzwbkpofx Albjcl - Accommodation options - Airport transfer Munich or Passau train station

Year of construction: 1999, condition: used, Technical Data Connection Data Power supply: 380 V Drive: three-phase motor, 0.75 kW, with electronic brake Processable cables Cross-section: up to 6 mm Motor speed: 1420 rpm, fixed Pressing force: 20 kN Stroke length: 40 mm Stroke time: 0.3 s Top dead center (TDC) infinitely adjustable Variable bottom dead center (BDC) Dcsdpfxexcuqaj Albel

Condition: excellent (used), mileage: 7,695 km, power: 331 kW (450.03 HP), first registration: 10/2015, fuel type: diesel, axle configuration: 8x4, wheelbase: 5,200 mm, fuel: diesel, fuel tank capacity: 400 l, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2015, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, fog lights, navigation system, power mirror, soot filter, spoiler, trailer coupling, = Additional Options and Equipment = - Aluminum fuel tank - Power brake booster - Roof spoiler - Low noise - Speed limiter - LED lights - Air suspension - Air horn - Particulate filter - Rear view camera - Sunshade flap - Stability control - Toolbox - Power take-off (PTO) - Towing hitch = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 10,837 cc Unladen weight: 24,830 kg Transmission Transmission: I-SHIFT, automatic Axle configuration Front axle: Steering Rear axle 1: Twin tires Dcodpfxoxn Sr Ss Albjl Rear axle 2: Twin tires Rear axle 3: Lift axle; Steering Condition Technical condition: very good Visual condition: very good VOLVO FM 450 8X4 TRIDEM WITH OVERMAT MSA 22.13 EPS PRO AUTOMATIC MIXING AND PUMPING SYSTEM FOR POLYSTYRENE SCREED EURO 6 L PACKAGE 450 HP 8X4 TRIDEM DRIVELINE, LAST AXLE LIFTED AND STEERABLE AIR SUSPENSION WHEELBASE 520 CM I-SHIFT AUTOMATIC TRANSMISSION WITH ENGINE BRAKE FM CAB WITH AIR CONDITIONING, NAVIGATION, XENON, CAMERA 3 SEATS IN CABIN TRAILER COUPLING MULTIPLE TOOLBOXES ONLY 7,695 KM!!! OVERMAT MSA 22.13 EPS PRO AUTOMATIC MIXING AND PUMPING SYSTEM FOR POLYSTYRENE SCREED Polystyrene volume: 22 m3 Binder volume: 13 m3 Dosing mixer: 400 l Pumping mixer: 800 l Height: 440 cm Water tank: 1,000 l Production of lightweight subfloors with polystyrene: up to 15 m3/h Production of foam concrete: up to 25 m3/h Drive: Vehicle PTO CE Removable BDF system FOLLOW US ON INSTAGRAM, FACEBOOK, AND TIKTOK TO SEE OUR VIDEOS OF OUR TRUCKS/COMMERCIAL VEHICLES AND MACHINERY OFFERED FOR SALE. WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Condition: used, Year of construction: 2013, power: 17.1 kW (23.25 HP), input voltage: 400 V, input current: 29 A, input frequency: 50 Hz, travel distance X-axis: 4,320 mm, travel distance Y-axis: 1,326 mm, travel distance Z-axis: 170 mm, number of axes: 5, number of slots in tool magazine: 33, Equipment: CE marking, Biesse Rover A 1343 CNC machining centre 5-Axis Description Rover A ATS CNC Machining Centers Working ranges X = 4,320 mm; Y = 1. 326 mm;Z = 170 mm Waste conveyor belt Automatic lubrication system Remote console 1 x 250 m3/h vacuum pump for standard system Auxiliary vacuum system for double working area machine Multi-zone 8 bars and 24 cups with automatic positioning (ATS-EPS X-Y) 8 reference stops with 115 mm rear stroke 8 front reference stops with 140 mm stroke positioned at a height of 1190 mm from the rear stops 4 side stops, with 140 mm stroke (2 right + 2 left) with implant 2 additional side stops, with 140 mm stroke (1 right + 1 left) Pneumatic system for panel lift Coolant control unit to replace the heat exchanger supplied with 13kW 5-axis units. Operating unit 5 interpolating axes 13 kW (17.4 Hp), HSK F63 connection, liquid-cooled. BiesseWorks Advanced Machine Chain tool magazine with 33 places - centre distance 120 mm (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). Dodpfey U Naiox Albecl (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, mileage: 560,000 km, power: 440 kW (598.23 HP), first registration: 05/2008, fuel type: diesel, overall weight: 26,000 kg, brakes: retarder, emission class: euro5, Equipment: ABS, air conditioning, crane, Actros 2860 !!!! INTERCHANGEABLE SYSTEM - SEMI-TRAILER and PLATFORM BODY Registration: km V8 engine 6x4 Retarder EPS with clutch Air conditioning Fassi crane F235 Year of manufacture: 2008 4x telescopic extension Remote control Engine completely overhauled 2 years ago Visit our website: ----Visit our website: German/English/Serbian/Croatian/Bosnian/Bulgarian... Goran German/English/?????/?????... Roman We will gladly assist you with financing or leasing. EU sale: net price upon presentation of company documents and VAT number. Dcjdpfx Aljzihahebjl VAT deposit: €2,000 Our services for you: - Customs license plates - Export documents and EUR1 - Worldwide transport - Accommodation options - Transfer to Munich Airport or Passau train station

Condition: good (used), mileage: 541,625 km, first registration: 07/2017, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,900 mm, fuel: diesel, brakes: retarder, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2017, Equipment: ABS, AdBlue, air conditioning, cruise control, electric window regulation, fog lights, fridge, navigation system, parking heater, power mirror, retarder, second fuel tank, soot filter, spoiler, = Additional Options and Equipment = - Aluminum fuel tank - Power brake booster - Roof spoiler - EPS - Low noise - Intarder Dcjdpfxsx Swgre Albol - Air suspension - Air horn - Particulate filter - Radio/CD player - Sleeper cab - Side door - Stability control - Auxiliary heater - Toolbox = Further Information = Suspension: Air suspension Front axle: Steering Unladen weight: 7,425 kg Payload: 11,575 kg Gross vehicle weight: 19,000 kg Technical condition: Good Optical condition: Good Guarantee: No liability for printing or typographical errors, subject to change, prior sale and errors reserved! Please contact Emad Al Shogran for more information. Vehicle number: 30 MAN 18.500 TGX / Retarder / Euro 6 / Full Air Chassis no.: WMA10XZZ6HM753621 Transmission: Automatic Suspension: Air / Air Air conditioning Retarder Engine brake Cruise control Refrigerator Auxiliary heating Navigation system Distance control assistant Lane departure warning Emission standard EURO 6 = Company Information = No liability for printing or typographical errors, subject to change, prior sale and errors reserved! Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email:

Year of construction: 2022, condition: excellent (used), functionality: fully functional, We offer this like-new LIYU IECHO TK4s cutting plotter / CNC milling machine, manufactured in 2022. Manufacturer: LIYU IECHO Model: TK4s Year of Manufacture: 2022 Condition: Like new Machine Type: Cutting Plotter / CNC Milling Machine PLATINUM Q-CUT 3532 flatbed cutter with camera + 1.8 kW milling module Includes software, monitor, and PC. Used very little and in excellent condition. Working area of 3500 x 3200 mm Equipped with an automatic camera positioning system (CCD), regional vacuum system, AKI system for precise knife depth adjustment, and 2 motors on the X-axis for high accuracy and clean cutting results. Material thickness up to 45 mm Max. cutting speed 1500 mm/s Cutting accuracy ± 0.1 mm Formats: PLT, DXF, HPGL, PDF, EPS Vacuum pump: 7.5 kW 6-zone control system Two cutting heads, safety device, automatic tool adjustment Tools / Applications Kiss-cut, UCT, EOT, EOT3, PRT, DRT, V-CUT, CTT, 1.8 kW router, punching tool. Suitable for cardboard, DiBond, Forex, MDF, wood, acrylic, Plexiglas, vinyl, and many other materials. Cutting area: 3500 mm x 3200 mm Tools: Electric oscillating tool, tangent knife, creasing tool, kiss-cut tool, powerful rotary tool Camera System AKI System Dodpfxsy Tk R Hs Albscl Cutting accuracy: 0.1 mm Power supply: 220 V 50 Hz / 380 V 50 Hz Automatic camera positioning system Disassembly, reassembly, and transport costs are additional. A quote for disassembly, reassembly, and training is available from the manufacturer! If the distance is considerable, an inspection can also be carried out via live video. All information is provided without guarantee. Subject to change, errors and omissions. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, functionality: unexamined, Extensive collection of a modular Emerson PACSystems RSTi-EP industrial controller. Standalone CPU with decentralized peripherals via ProfiNet. Offered as a complete package: controller, 2 network adapters, numerous digital and analog I/O modules. Suitable for building a complete control node or for expanding or providing spare parts for existing systems. Components: - 1x EPSCPE100 controller (CPU); 2x STXPNS001 ProfiNet slave adapter - 14x ST-1218 (digital input 8x24 V DC); 6x ST-2328 (digital output 8x24 V DC) - 10x ST-3218 (analog input 8x 4-20 mA); 7x ST-4214 (analog output 4x 4-20 mA) - Total of 40 modules: 112 DI, 48 DO, 80 AI, 28 AO - From an industrial environment, sold as is, no warranty/guarantee of functionality; only sold as a complete set, not individually. More equipment and devices are continuously being offered for sale from a laboratory and pilot plant liquidation – inquiries are welcome. Dsdpfx Alozmaq Hsbscl Sold on behalf of a customer through the Köck auction house. Located in Eastern Austria, exact address available upon request. Pick-up by the buyer.

Condition: excellent (used), Working area X: 5,920 mm Working area Y: 1,287 mm Working area Z: 170 mm C, A axes: available Swivel machining: 2 working areas for swivel machining Work table: ATS-HTS-EPS Automatic console positioning system EPS 10 automatically positionable consoles 2 locating pins per console 5-axis milling spindle: Power: 9 kW / 11 kW at 60 Hz Speed: up to 24,000 rpm Tool holder: HSK-F63 Liquid-cooled Drilling head BH 26 16 vertical drilling spindles 4 horizontal drilling spindles in the X direction 2 grooving units for grooves in the X and Y directions Vertical drilling spindles 16, Horizontal drilling spindle X = Tool changer: Chain tool changer with 21 tool positions Clamping systems: Uniclamp clamping system - 6 pieces Control system: BIESSE XP 600 Chip removal: Motorized conveyor belts for the removal of chips and machining waste Vacuum pump BECKER: Motor power 5.5 kW Conveying capacity: 244/286 m³/h Dcjdpjzxbhwofx Albjl Additional equipment: Numerous vacuum suction cups; 6 UNICLAMP clamping systems; Numerous HSK 63 tool holders; 2 large saw blades in the tool magazine Compressed air: 7-7.5 bar Total power: 25.3 kW Weight: 4200 kg

Condition: used, mileage: 75,469 km, power: 110 kW (149.56 HP), first registration: 06/2012, overall weight: 9,300 kg, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 01/2027, gearing type: semi-automatic, emission class: euro5, Year of construction: 2012, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), soot filter, * Unimog U 20 Tipper + Mowing Attachment Dsdpszwkm Hjfx Albocl * First registration: 06-2012 * 4x4 All-wheel drive * EPS transmission + clutch * Air conditioning * Mulag MFK 400 * Mulag MK 1100 * Front hydraulics * More pictures and videos available via WhatsApp * Information without guarantee and subject to prior sale.