Used Edge Contouring for sale (4,397)

Year of construction: 2013, operating hours: 5,200 h, condition: excellent (used), functionality: fully functional, We offer this very good Comandulli SPEEDY SYSTEM D8 automatic stone edge polishing machine, year of construction 2013. Manufacturer: Comandulli Model: SPEEDY SYSTEM D8 Year of construction: 2013 Condition: very good Nkjdpfoycxyaox Ad Njt If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, OTT Tornado Top Edge Banding Machine in Excellent Condition PU glue pot with release agent, also suitable for EVA adhesives. We had the entire machine recalibrated in September 2024. The glue unit was replaced. The results are perfect with transparent adhesive and incredible with white panels using white adhesive. The machine runs perfectly and without any problems. Technical specifications: Edge thickness: 0.4 - 8 mm Panel thickness: 8 - 40 mm Minimum panel length: 150 mm Minimum panel width: 70 mm Feed speed: 14 m/min Pre-milling unit: with 2 HF motors, 2.3 kW, 12,000 rpm Cross-cutting unit: with 2 HF motors, 0.3 kW, 12,000 rpm Flush trimming unit: with 2 HF motors, 0.7 kW, 12,000 rpm Nkedpfxev Sm Hco Ad Net Fine trimming unit: with 2 HF motors, 0.3 kW, 12,000 rpm Corner rounding unit Scraper blade Buffing unit Triple spraying Total power: 17.5 kW Dimensions: Length: 6180 mm Width: 1770 mm mm Weight: 3100 kg - Available immediately -

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 1000025340, travel distance X-axis: 6,735 mm, travel distance Y-axis: 1,650 mm, travel distance Z-axis: 245,290 mm, rapid traverse X-axis: 85 m/min, rapid traverse Y-axis: 85 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Biesse BH 660, bSolid, bEdge, workpiece height (max.): 60 mm, Short Description • X axis working area: 6735 mm • Y axis working area: 1650 mm • Working Table: Pod and Rail • Main Electrospindle Power: 13.2 kW • Number of Controlled Axes: 4 axes • Max Edge Height: 60 mm • Total Number of Drilling Spindles: 20 • Total Number of Tool Changer Positions: 16 Long Description • Subfamily: CNC Machining Centers for Routing, Drilling, and Edgebanding • Type of Work: Edgebanding, Drilling, Routing • Maximum Panel Passage: 60 mm • Number of Working Fields: 2 Njdpfsycvcxjx Ad Njkt • Working Table: Pod and Rail • Number of Rails: 10 • Pod Position Indicators • Vacuum Cups for Securing Workpieces • Number of Vacuum Cups: 40 • Clamps for Securing Workpieces • Vacuum Pump • Number of Pumps: 1 • Single Pump Capacity: 250 m³/h • Boring Units: 1 (Top) • Vertical Boring Spindles: 20 • Horizontal Boring Spindles in X: 4 • Horizontal Boring Spindles in Y: 4 • Router Spindles: 1 (Top) • Number of Controlled Axes: 4 • Automatic Tool Changer • Motor Power: 13.2 kW • Edgebanding Operating Units: 1 • Gluing Unit: Mounted on Main Beam • Glue Pot for Hot-Melt Adhesive • Edge Coil Magazine • Number of Magazine Positions: 4 • Grooving Unit: 2 Top Units, Fixed for Grooving in X and Y • Tool Magazine: 1, with 16 Positions • Tools Positioned on the Machining Head • Combination Head for Edge Scraping and Glue Scraping • Air Jet Panel Edge Cleaning Unit • Control System: PC Control • Machine Programming Software: Bsolid • Protective Structure for Operating Units with Safety Sensors • Waste Chip Conveyor

Condition: new, functionality: fully functional, saw band length: 2,280 mm, saw band width: 150 mm, Description: - Small, flexible all-rounder Nkodpfx Adju Ac Tqe Njt - Small table on the deflection roller for sanding radii and shapes - Motorized belt oscillation - Height-adjustable work table - Incl. 10 sanding belts 150 x 2280 mm K120 Technical data: Motor power: 2.2 kW 90-180 ° tiltable Belt speed: 22 m/s Table size: 750 x 350 mm Sanding belt dimensions: 150 x 2280 mm Weight: from 180 kg

Condition: used, Year of construction: 2004, machine/vehicle number: 59274, type of input current: AC, input voltage: 230 V, disc diameter: 150 mm, FRANK Surface Grinder GECKO S Technical data: • Motor voltage: 230 V • Motor power: 1,500 W • Grinding disc diameter: 150 mm • Weight approx. 6 kg Nsdpfxoycuy No Ad Nekt The machine has been overhauled in our workshop and is fully operational. The machine is supplied including power cable and dust bag. Shipping available at extra cost. We ship exclusively within the EU. No shipping outside the EU.

Condition: excellent (used), Year of construction: 2018, Smart Touch Numerical Control with Sintra HD Software Panel height mm 10 – 60 Solid mm 22 Pvc/Abs mm 3 Feed speed up to mt/min 25 Nodewlbxljpfx Ad Nskt Working height electronically adjustable by N.C. Motorized and electronically adjustable panel support guide by N.C. Anti-adhesive group Rectifying group with 2 motors electronically adjustable by N.C. Reel holder plate with n° 1 position Gluing group for EVA hot melt glue with glue pot End trimming group with 2 motors with dynamic suction system that follows the blades in each of its movements. Staggered trimming/cornering unit with 2 motors electronically adjustable by C.N Anti-stick unit Rounding unit with 2 multifunction motors (cornering unit + rounding unit) Electronic edge scraping unit electronically adjustable by C.N Glue scraping unit Brush unit “SP-501” Automatic piece return system with Winner 4A bridge unloading

Condition: refurbished (used), functionality: fully functional, Automatic profile edge sander DE STEFANI 1 sanding unit with adjustable sanding belt (interchangeable profiled or straight pads) Nkedpfx Adevxt Hie Njt unit tiltable 0° to 90° timed approach and retraction of the sanding pad variable feed speed via feed belt variator sanding belt oscillation pneumatic blow-off of sanding belt robust rubber link feed belt telescopic pull-out support for large workpieces

Condition: used, Year of construction: 1978, sheet width . mm plate thickness . mm serial number 20719 Nkodpfx Asucgvasd Nst total power requirement . kW weight of the machine ca. 1,4 t

Condition: ready for operation (used), T&S ConturoMatic T2 Contour Measuring Device Optical-incremental measuring system Measuring speed 0.1...3.0 mm/s Positioning speed up to 25 mm/s Measuring point spacing 0.5...25 µm Accuracy ±(0.9+L(mm)/100) µm Radius accuracy ±0.005% of the nominal value at R 12.5 mm Distance accuracy ±(1.2+L(mm)/100) µm Angle accuracy ≤ 30'' Technical data has been adopted. You are welcome to visit us for a viewing. We would be happy to arrange a cost-effective shipping service for you. You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Njdswak Nvopfx Ad Nskt Visit our shop and check out our other offers. Company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description purposes. Deviations from technical specifications and errors in the description of the item may occur and are reserved.

Condition: used, Year of construction: 1996, Plate feed direction: from operator to the left Max. edge thickness: 8.0 mm Min. workpiece width: 70 mm Feed speed: 11 m/min Heating time: 4.5 min Automatic roll magazine: Yes End trimming shears up to: 0.2 - 3.0 mm Individual edge feeding: Yes Automatic gluing: glue pot with granulate, positioned on top Cut-off saw: fixed at 90° Flush milling unit: Yes Combination milling unit: Yes Nksdpsxwdp Uefx Ad Net Aggregate display: Display available Control type: manual Operation: selector switch/push buttons Mobility device: No Protective hood: Yes Working height / table height: 870 mm Weight approx.: 670 kg Dimensions: 3600 x 1400 x 1200 mm Motor power: 11 kW Extraction port diameter: 120 mm Location: Supplier

Condition: excellent (used), CNC Machining Centre for Routing, Drilling, and Edgebanding of Straight and Curved Panels Nsdpfjlpf E Uex Ad Njkt 4-Axis Electrospindle – HSK F63 Automatic Tool Changer with 12 Positions Boring Unit Edgebanding Unit Edge Storage with 3 Positions Vacuum Pump

Condition: used, Compact edgebanding machine Hebrock EURO 3001 for precise edging of panel material with edge bands. The machine enables clean edge processing through automatic glue application, pressing rollers and post-processing aggregates. Ideal for furniture and interior construction. Technical data subject to change. Nkjdpfx Ajxdc D Rod Nst Unit 1: Glue application Unit 2: caps Unit 3: Flush milling workpiece height: approx. 10 – 40 mm edge thickness: max. approx. 12 mm feed rate: approx. 10 m/min

Condition: excellent (used), functionality: fully functional, Equipment: double-sided, Additional equipment: Njdpfexwui Eox Ad Nekt Seperating agent spray device on top/bottom / Double Hogger Longitudinal/Cross: 6.6 kW with electropneumatic control / Gluing Unit A3 - 2 rolls / Profile Trimming Unit FF12 on top/bottom with motors at 12000 rpm / Finish Unit FA11 on top/bottom / Stepless stop cams with maximum cam projection of 25 mm / Standard Trimming Unit SF20 6.6 kW / Rough Trimming Unit 0.55 kW PUR OTT 2kg Melting Station / Machine Benefits Technical Machine Benefits Workpiece thickness: 12 - 40 mm / minimum workpiece size (lxw): 250 x 240 mm / maximum workpiece size (lxw): 2500 x 1200 mm / maximum workpiece weight: 50 kg Roller material edge thickness: 0. 4 - 3 mm / maximum edge cross section (plastic): 135 mm² / maximum edge cross section (veneer): 100 mm² / maximum roller diameter: 830 mm Longitudinal processing speed: up to 35 m/min for thin edge up to 0. 6 mm /up to 30 m/min for thick edge up to 3 mm Cross processing speed: up to 30 m/min for panel sizing/ up to 20 m/min for edge processing Minimum workpiece gap: 500 mm

Condition: good (used), Year of construction: 2016, operating hours: 16,977 h, functionality: fully functional, feed length X-axis: 140 mm, feed length Y-axis: 50 mm, feed rate X-axis: 18 m/min, edge thickness (max.): 3 mm, total length: 6,000 mm, workpiece height (max.): 60 mm, overall weight: 3,000 kg, SCM OLIMPIC K 800 - T-ERL EDGEBANDER EDGEBANDER (W/PRE-MILL & CORNER ROUNDING): Specifications: -- Edge Capacity, 0.4 to 8 mm (0.016 to 5/16") for strip feeding. -- Panel Capacity, min. width 50 mm and 140 mm min. length, (2-3/8" and 5-1/2"). Panel thickness min./max. 8 - 60 mm (3/8" - 2-3/8"). Equipped With: -- Adjustable In-feed Fence: Manually pre-set with digital indicator and pneumatic panel spacing device. -- Pre-Milling Station, RT-E: Spindles 2 x 3.0 HP, 12,000 RPM, (1) with PLC controlled jump action and manual digital indicators positioning. -- Automatic Strip & Coil Feed Magazine: For straight edges and 3 mm guillotine for coils. -- Gluing Station: For EVA (Hot Melt) with Teflon coated glue tank and quick disconnect to change glue tanks fast if needed. Heat-up time approx. 10 Min. -- Pressure Section: Servo motor positioning, (4) pressure rollers, first larger, Teflon coated and powered. Workstations: -- End Trimming Station K-SEL: Front & rear 2 x 0.5 HP, 12,000 RPM motors mounted on THK guides, swivels 0 - 15, rapid set up between straight and angled cutting with the automatic swivel cylinder. -- Flush Trimming Unit: Top/Bottom, 2 x 1.0 HP, 12,000 RPM with 2 pre-set pneumatic positions, flush and overhang, remote pneumatic in/out positioning. -- Bevel/Radius Trimming Unit: Programmable, servo motor positioning, 2 x 1.0 HP - 12.000 RPM motors for change-over on the fly. -- Corner Rounding / Trimming Unit: For additional top & bottom trimming of linear an/or vertical leading & trailing corner when edgebanding all (4) sides, 2 x 0.8 HP - 12,000 RPM motor. -- Profile Scraping Unit "RAS/1000": Top/Bottom with (2) indexed manual pre-sets. Large dia. copy wheels for max. accuracy and pneumatic in/out positioning. -- Glue Scraping Unit, "RC-V": Top/bottom flat glue scraper with pneumatic positioning through controller and air-blow off nozzle to keep the knifes clean. -- Buffing Unit "SPN": Top/bottom, oscillating 2 x 0.25 HP - 3,000 RPM motors, tilting up to 12. -- Hot Air Unit: Single blower with adjustable heat range and directional heat shield for top/bottom coverage. Restores color luster on thick pvc edging materials that my be lost during the edge scraping process.Operator Interface: -- Startouch Controller, 12" color touch screen, swivels 270 at in-feed of machine. Capable to store (100) programs, (6) at the touch of a single key. Graphical display of all working units. Tracks production data, diagnostic information and monitors maintenance schedules. Complete With & Features: -- Feed-speed, 36/52 FPM, 1 x 2.5 HP feed drive motor, 200 Hz frequency inverter for all trimming units. -- Electronic, programmable hold-down pressure beam positioning, lighted safety/sound enclosure cover and outboard panel support. -- Actual Model: OLIMPIC K 800 T-FR2 2 glue tanks + 1 glue tank for spare parts Njdpfoxxy Rkjx Ad Nekt

Condition: used, Optacom VC-10 Universal Measuring System Surface Roughness Tester / Contour Measuring Device Device is sold without PC and software (hardware only). Resolution in X and Z axes: 0.002 µm Resolution at the probe tip: 0.003 µm VC-10 measuring range horizontal/vertical (X-axis/Z-axis): 225 mm Measuring system: optical, incremental, and non-contact in all axes (X, Z, T) Accuracy: +/- (0.5 + L/100) µm Maximum measuring force: 10 - 150 mN Measuring speed: 0.1 – 2 mm/sec (automatically optimized) Probe tip radius: 0.002 – 1 mm Measurable slopes: 78° upwards; 87° downwards VC-10 dimensions (W x D x H): 950 x 380 x 725 mm VC-10 weight (approx.): 150 kg Description has been adopted as provided. You are welcome to arrange an on-site inspection. Upon request, we can organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued provided a valid VAT ID number is supplied. Subject to prior sale. Njdpfx Asybbd Sjd Nokt Visit our shop and check out our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Year of construction: 2000, condition: good (used), EWD Combimes edging line. Year of manufacture: 2000, type DK90-TL. Timber feed from the left. Maximum edging width 500 mm, maximum edging thickness 120 mm. 90 kW drive motor. Cycle rate with 4.0 m wood length approx. 18 pieces/min. Complete with original EWD control system. Delivery from the accumulation conveyor before singling through to the sliver separator included. The line is complete and in good condition. Nkodpfxoxcwvxo Ad Njt

Year of construction: 1995, condition: refurbished (used), Trimming saw – edging saw MEM Cobra Year of manufacture: approx. 1995 Nksdpfjxcp A Dsx Ad Not Max. cutting height: 120 mm, max. pass-through width: 1,070 mm. 4 variable axes. 2 x 55 kW saw drive power. Completely overhauled machine! System immediately available for takeover!

Condition: used, Year of construction: 2017, Used machine Year of manufacture: 2017 Equipment and Technical Data: - Base machine: Streamer 1057XL 200-400 V / 50 Hz, with manual pressure bridge adjustment Nkjdpox Twh Eofx Ad Net - Extendable XL workpiece support: spacing 600 mm - Jointing milling unit: FG201 with 2 cutterheads for trimming panel edges - Diamond cutters: Diameter 70 x 64 x 30 mm, Z2 + 2, left-hand rotation, Air Stream System - Diamond cutters: Diameter 70 x 64 x 30 mm, Z2 + 2, right-hand rotation, Air Stream System - Edge feeding unit: 1903, automatic transport for roll and strip material - Glue application system: Glu Jet GJ301 2.3 kW / 50 Hz, automatic glue height adjustment (contact nozzle) - Automatic reloading function - Pressure unit: 1912-3, pneumatic, first roller driven, with pneumatic plunge control - End trimming unit: 1918, 60 mm, pneumatic, angular trimming 0-10 degrees, pneumatic adjustment - Extraction hoods: for end trimming unit 1918 - Multifunctional milling unit: FR 201, for flush, radius, and profile milling, including DIA cutters - Corner copying unit: 1832, 1 x 0.35 kW / 200 Hz / 12,000 rpm, corner copying for edge thickness up to 3 mm - Diamond cutter: Diameter 53 x 10 x 16 mm, Z = 3, R = 2 mm, CM technology (Leuco system), integrated chip extraction, for profile milling unit 1832 - Scraper unit: 1929 - Complete chip box: Diameter 120 mm, for 1929 + 1964 + FK70 - HW reversible knives: for scraper holder R = 2.0 mm, 2 pcs required - Surface scraper: FK 701 for removing excess glue for a clean glue joint - Spray device: TR 201 for infeed and outfeed areas - Buffing unit: 1940, 2 x 0.09 kW / 50-60 Hz / 1,400 rpm, for finishing and polishing edges, with 2 textile discs, tiltable 0-5 degrees - Minimum workpiece length: 160 mm - Workpiece thickness: 6-45 / 60 mm - Edge thickness: 0.4-3 / 6 mm - Feed speed: 10 m/min Length: 4,630 mm Weight: approx. 1,440 kg Availability: short notice Location: 65439 Flörsheim

Condition: excellent (used), CATALOG NUMBER 7730 TECHNICAL DATA Milling Machine: - Minimum width of workpieces: 50mm - Workpiece thickness: 16-40mm - Edge thickness: 0.5-3mm - Motor power: 1.1kW Nkodpfx Adexa Egms Not - Air requirement: 6 bar - Extraction nozzle: 60mm - Dimensions (L/W/H): 1900x850x1450mm - Weight: 290kg Trimming Unit: - Blade diameter: 150mm - Table size: 750x820mm - Motor power: 0.12kW / 2800rpm ADVANTAGES – Polish-made – Trimming unit – Profiled cutters included – Unpainted – DTR documentation – Used milling machine, in very good condition Net price: 4500 PLN Net price: 1070 EUR depending on a rate of 4.2 EUR (Prices may vary with significant rate fluctuations)

Condition: as good as new (ex-display), Year of construction: 2020, functionality: fully functional, LBK.150 LBK-150 LBK004 Worktable extension Nodpfoya H Nqjx Ad Nokt LBK005 Motor with 2 speeds 700/1400 rpm LBK008 Base for mounting feed unit

Condition: used, Year of construction: 2018, total length: 5,370 mm, total height: 1,600 mm, total width: 1,020 mm, - Year: 2018 - Documentation available: No - CE marking present: Yes - CE certificate present: No Nksdpfjxyy Ryox Ad Not - Serial number: 18421 - Transport dimensions: 5370mm x 1020mm x 1600mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Edge banding machine with HolzHer 3 roller feed Nkjdpfevkgdrox Ad Net

Condition: excellent (used), Catalogue number 7843 TECHNICAL DATA - Table dimensions: 2050x350mm - Table dimensions with support: 2050x940mm - Min. workpiece length: 120mm - Min. workpiece width: 90mm - Workpiece thickness range: 10-45mm - Edge width range: 12-48mm - Edge thickness range: 0.4-3mm - Feed speed: 6.4m/min - Power consumption: 2.3kW - Required air pressure: 0.7 Mpa - Spindle speed: 10,000 rpm - Extraction connector: 2x100mm - Heating power: 1250W - Dimensions (L/W/H): 2400x1300x1130mm - Weight: 360kg Nedpfox A Dt Djx Ad Njkt ADVANTAGES – Unpainted – With polisher – Used machine, in very good condition Net price: 12,000 PLN Net price: 2,860 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER: 7404 TECHNICAL DATA - Minimum workpiece thickness: 16mm - Maximum workpiece thickness: 60mm - Height to table surface: 920mm Nkjdpfx Aox Tgv Ssd Njt - Motor power: 1.2kW - Voltage: 400V - Disc – guillotine – feed rollers for tape – glue tank – 3 guide rollers (first one is the drive roller) - Worktable: 1600x670mm - Dimensions (L/W/H): 1600x1400x1100mm - Weight: 170kg ADVANTAGES – Polish manufacture – Suitable for edging both straight and curved edges – Used machine, in very good condition Net price: 5,900 PLN Net price: 1,400 EUR (based on 4.2 PLN/EUR exchange rate) (Prices may change with significant fluctuations)

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, total length: 3,350 mm, workpiece height (max.): 45 mm, total width: 1,510 mm, edge thickness (max.): 45 mm, total height: 1,640 mm, overall weight: 770 kg, extraction nozzle diameter: 60 mm, We offer for sale a professional edge banding machine with pre-milling unit of the company FELDER model G480. Below you will find some useful information about the machine: * Year of production - 2017 * Equipped with the Schugoma hot-air system for zero joints * Connected load - 7 kW * Edge thickness - 0.4-350 mm * Thickness of the sheets - 8-45 mm * Minimum width/length of the sheet - 70/210 mm * feed speed - 9 m/min * has a pre-milling and corner rounding unit * Automatic feeding of edges from a roll Nsdpfx Adetp T Dto Nskt * Impact shears for PVC and ABS edges up to a thickness of 3 mm. * Teflon glue tank with a capacity of 1.2 kg. * Saw blade cutting unit with 12,000 rpm. * Rotating control panel with LCD display. * Suction nozzle - 7 x 60 mm * Weight approx. 770 kg * Overall dimensions 335 x 151 x 164 cm (Wx Lx H) * Perfect technical and visual condition