Used Edge Contouring for sale (5,267)

Condition: used, Year of construction: 2004, Used machine Year of manufacture: 2004 with gluing unit for hot-melt adhesive granules Glue reservoir located below the glue roller Glue application to the workpiece via glue roller in both co-rotating and counter-rotating modes automatic edge magazine for coil material and fixed lengths Pressure zone with pneumatically-driven main pressure roller and special post-pressure rollers to compact the upper and lower glue joint Centrally adjustable upper pressure Central manual chain conveyor lubrication Control panel at machine infeed End trimming unit (saw aggregates) for front and rear edge overhang with high-precision linear guides 2 motors, each 0.18 kW Swivel range for straight and bevel cutting 0–15 degrees Flush-milling unit, top and bottom, with vertical and horizontal tracing Swivel range 0–15 degrees with 2 milling motors, each with replaceable insert cutter combinations (straight/radius) Digital counters enable rapid and precise, i.e., repeatable, settings Two-point pneumatic adjustment for upper and lower milling motors Scraper unit for finishing processing with horizontal/vertical tracing Support table extendable up to 350 mm Integrated section control for contactless operation of processing functions. Codexya Rtepfx Ab Tjrk Settings via keyboard and LED display Workpiece thickness: 8–50 mm Edge thickness: 0.4–3 mm Feed speed: approx. 9 m/min Connected load: 4.1 kW Compressed air connection: 6 bar Weight: approx. 750 kg Machine length: 3,150 mm Availability: short term Location: Flörsheim

Condition: used, Storage location: Sonnefeld Cedpjway Dcsfx Ab Tork

Condition: used, Year of construction: 2016, functionality: fully functional, overall weight: 450 kg, type of input current: three-phase, height adjustment type: mechanical, input voltage: 400 V, – Italian production – year of production 2016 – pre-milling – DTR, CE TECHNICAL PARAMETERS: – edge thickness: 0.5 - 3 mm – wooden edgeband: 0.5 - 5 mm – element height: 8 - 50 mm – minimum edgebanding length: 160 mm Credpowb Ha Tsfx Ab Tek – minimum board width: 110 mm – feed speed: 7 m/min – pre-milling – radial cutters – edge cutting – radial scraper – straight scraper – blower for each unit – working pressure: 8 bar – working machine length: 2030 mm – transport dimensions (length/width/height): 330/80/125 cm – weight: 450 kg

Condition: excellent (used), OMAB/Comec curved part grinder Working width 200mm Cjdpfxetvfmho Ab Tsrk Sanding belt oscillation Pneumatic material clamping Main motor 5.5kw Feed motor 0.25kw Extraction stubs 2x100mm Dimensions of the machine 210x80x150cmH Weight 450kg

Condition: used, Year of construction: 2012, 1 edge banding machine, manufacturer Format 4, model PERFECT 710, year 2012, serial no. 200.12.004.12, touchscreen control, internal no. I440048 Crsdpfx Aexzny Ejb Tsk

Condition: ready for operation (used), Year of construction: 2010, I sell edge sanding machine with milling head STEMAS. 1 pc. Milling head manual adjustable 3 pc. Edge sanding heads tiltable Automatic feeding Codpfoxznq Dex Ab Tork Return band conveyor for elements Spare sanding bands included. Available immediately.

Condition: used, Year of construction: 2013, Used machine Crjdpfx Abjwka Iie Tjk Year of manufacture: 2013 Features and technical data: The machine has been completely overhauled: - New Glue Jet 301 gluing system (top part 1 mm) - All units inspected - All cutters sharpened - All knives replaced Electrics for infinitely variable feed: 400 V / 50 Hz, 2.2 kW Motorized pressure bridge adjustment Automatic chain lubrication PPC 315 control with 15" touchscreen ECO MODE energy saving mode Infeed fence 1350 mm, motorized adjustment Jointing unit 1802: - 2 x 2.0 kW, 200 Hz, 12,000 rpm with 2 milling units for jointing the panel edge - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, left-hand rotation for jointing unit - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, right-hand rotation for jointing unit Fully automatic edge feed 1901 Automatic glue application station Glu Jet GJ301: - 2.3 kW; 50 Hz - Hopper for granulate Pressure unit 1913 MOT End trimming unit 1918 (60 mm) pneumatic Multifunctional milling unit 1826 MOT4 (2 x 0.65 kW): - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm left-hand rotation - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm right-hand rotation Profile milling unit 1833 MOT4: - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, left-hand rotation with CM technology - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, right-hand rotation with CM technology Scraper unit 1929 MOT2: - Carbide reversible knives for scraper holder R = 2.5 mm (2 pieces required) Flat scraper 1964 Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Availability: short notice Location: 63934 Röllbach

Condition: used, Year of construction: 1994, Edge thickness 0.3 - 20 mm, edgeband height: max. 66 mm, edgeband length: min. 200 mm, workpiece width min. 60 mm, workpiece length min. 140 mm, workpiece thickness: min. 6 mm, max. 60 mm, feed speed 8 or 16 m/min - Edgebanding with Ultra - Granupress - End trimming with 2 saws, 0 - 15° tiltable - Milling, radius / flush - Corner copying - Scraper - Pneumatic buffing Location: Nattheim Crjdevvkdtspfx Ab Tsk

Condition: excellent (used), Catalog number 7814 TECHNICAL DATA Equipment: - disc - pre-milling - tape feeder - glue container (cartridges) - guillotine – pre-trimming of the edging - 3 pressure rollers - 2 finishing trimming units with saw blades - 2 milling units for edge shaping (radius cutters) - corner processing unit - scraping units – for removing excess glue - polishing units - workpiece thickness: 6-45mm - minimum workpiece length: 180mm - minimum workpiece width: 60mm - edge band thickness from roll: 0.4-3mm - air requirement: 6-8 bar Crjdexxla Rjpfx Ab Tok - extraction connection diameter: 1x60mm, 4x80mm, 1x120mm - dimensions (LxWxH): 5900x950x1850mm - weight: 1720kg ADVANTAGES – German manufacture – spraying system – pre-milling and corner processing – unpainted – very good condition, hour counter: 3613h – used edgebander Net price: 56,900 PLN Net price: 13,550 EUR depending on rate 4.2 EUR (Prices may vary with higher fluctuations)

Condition: good (used), Year of construction: 1996, functionality: fully functional, Tecnolegno Universal 640 25kW edge sanding and shaping machine Machine in excellent condition Can be inspected in department 14 Dismantling, loading and transport at buyer's expense Crodpfx Aew Dpwtjb Tok

Year of construction: 2016, condition: excellent (used), functionality: fully functional, machine/vehicle number: 02_01_08, Eurotech Way Automatic Glass Edge Coating Machine Professional automatic machine for glazing and lacquering the edges of glass sheets. Suitable for glass panes with thickness of 4–19 mm and allows precise application of enamel/glaze on edges of 10–200 mm width. Equipped with dosing and application roller system, automatic parameter setting, roller conveyor system, and recipe memory for settings. Perfect for batch production in the glass industry—ensures uniform, aesthetic, and repeatable edge finishing. The machine fully automates the process and significantly increases productivity. Low usage – only 25,206 cycles performed in total. Dimensions: 5864 x 2695 mm Power supply: 400V - 50 Hz Required power: 4 kW Weight: 4000 kg Interface in 3 languages: English, Italian, Polish Operational machine, possible to test before collection. Ready for pick-up. Cedpsxzfu Tofx Ab Tjrk Dismantling, loading, and transport are the responsibility of the buyer.

Condition: excellent (used), Edge bander Holzher Streamer 1057 Pre-milling units Glue application, GLUE JET cartridge glue system Suitable for PUR glue Equipped with glue discharge Pneumatic pre-cut guillotine Pressure rollers Final trimming saws, angle adjustable Top and bottom milling units R1, R2 Corner rounding unit Profile scraper Flat scraper Max edge banding height: 45 mm Max edge thickness in roll: 3 mm Crjdpfx Abjxf H Rdo Tsk Machine length: 460 cm Feed speed: 10 m/min

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Equipment and technical specifications: - Round tank glue application unit - Feed unit with automatic edge band magazine - Pressure zone with multiple pressure rollers - End trimming: 2 motorized saw units for front/end trimming - Top/bottom milling units: 2 milling units with copy wheels for radius or chamfer - Radius scraper: pneumatically controlled, for post-processing radii - Surface scraper: for smoothing the edge surfaces - Buffing unit: 2 buffing wheels with motors for final finishing - Riepe spraying device - Control: PLC with operator panel - Feed frequency inverter replaced by Ott in 2022 - Feed speed approx. 10–12 m/min - Workpiece thickness up to 52 mm - Edge thickness 0.3 – 12 mm - Power supply 3x 400 V AC, 50 Hz - Rated power 12.7 kW - Rated current 30.5 A - Control voltage 24 V DC - Max. fuse protection 35 A (5x 6 mm² connection cable) Csdpfx Asxdpm Seb Tork Machine dimensions: approx. 6120x840x1385 mm Machine weight: approx. 3,000 kg Availability: Short notice Location: Bavaria

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Codpovvkd Tsfx Ab Terk Storage location: Nattheim

Condition: used, Year of construction: 2015, functionality: fully functional, BIESSE Edge Banding Machine AKRON 1440-A Automatic single-sided edge banding machines for gluing and processing straight edges with roll material (melamine, PVC, ABS, veneer) and strip material (solid wood, laminate, sliced veneer, etc.) • NC control with touch display • Automatic start of aggregate motors • Direct selection for second pass • Operating data acquisition • Software-guided maintenance TECHNICAL DATA Workpiece thickness 10-60 mm Workpiece thickness with MFU aggregate (depending on profile) 10-35/60 mm Edge height 14-64 mm Edge thickness – roll material 0.4-3 mm Edge thickness – strip material (*) 0.4-10 (12) mm Workpiece overhang 25 mm Minimum panel length 140 mm Minimum width (at 140 mm length) 85 mm Minimum width (at 250 mm length) 50 mm Feed speed 12 m/min Dust extraction* 8x connection Ø100 mm Compressed air connection 7 bar Glue pot capacity 2 (approx.) kg * Depending on selected aggregates. - GLUING UNIT VC-511 Applies the hot-melt adhesive to the workpiece, feeds the edge to the workpiece, automatically cuts it from the roll, and presses it onto the workpiece, guaranteeing perfect positioning. Credpfx Asxzb Iisb Tek - END TRIMMING UNIT IN-801 For trimming the front and rear edge overhangs with 0° to 15° angle. - 2-MOTOR MULTIFUNCTIONAL PROFILE MILLING UNIT AR02 E For corner rounding and profile milling of workpiece edges made of synthetic material up to a thickness of max. 3 mm. JOINTING CUTTER UNIT RT02 Joins the workpiece before glue application. Equipped with two 1.8 kW high-frequency motors at 12,000 rpm. SCRAPER UNIT RB02 For post-processing thick PVC/ABS edges. FLAT SCRAPER RC02 Aggregate for removing excess glue in the edge-to-panel area. Equipped with tracing rollers and a flat knife with engagement control. BUFFING UNIT SZ02 For cleaning and buffing the workpiece edge using fabric polishing discs. The unit automatically adapts to the workpiece thickness. ANTI-ADHESIVE SPRAY UNIT ADZ02 Precision application of anti-adhesive using injectors activated by numerical control. KIT PRO-GLUE The PRO-GLUE kit includes the following components: • TEKNO-GLUE system for optimal gluing through: - controlled pressure of the glue roller - automatic disengagement in case of feed stop - automatic ON/OFF of the glue unit • REVERSE system to switch the glue roller for co- or counter-rotation Electrical and mechanical preparation for the use of special glue pots for POLYURETHANE glue with machines equipped for EVA gluing. NC Axis for Fine Trimming Unit Kit for the automatic adjustment of tracing rollers and tools to match edge type and thickness. Adjustment takes place via the control system. Pair of multiprofile cutters for the fine trimming unit: 25-degree bevel, radius 2 mm + radius 1 mm plus straight profile for solid wood. NC Axis for Profile Milling Unit Kit for automatic adjustment of the tracer to match the edge thickness. Adjustment takes place via the control system. Function for processing only on the corners. NC Axis for Scraper Unit Kit for automatic adjustment of tracing rollers and tools to match edge type and thickness. Adjustment takes place via the control system.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, workpiece height (max.): 50 mm, workpiece length (max.): 200 mm, workpiece width (max.): 2,500 mm, rotational speed (max.): 18,000 rpm, Equipment: CE marking, TECHNICAL DETAILS Panel width max.: 2,500 mm Panel width min.: 130 mm Panel height max.: 50 mm Panel height min.: 8 mm Panel length max.: 200 mm Panel length min.: 30 mm UNITS Sizing unit Unit: Trimming Unit: Corrections automatic engagement based on timer Motor power: 2.2 kW Max. speed: 6,000 rpm Magazine for coil Number of positions: 1 Gluing system Glue pot for polyurethane adhesive Prefuser for polyurethane adhesive Cedpfoxxavtex Ab Tsrk Prefuser for polyurethane adhesive D4-e Edge pressure roller track Number of pressure rollers: 4 Edge processing unit 1 Unit: Top router Number of motors: 1 Motor power: 0.7 kW Max. speed: 18,000 rpm Edge processing unit 2 Unit: Top router Number of motors: 1 Motor power: 0.7 kW Max. speed: 18,000 rpm Edge processing unit 3 Unit: Hot air blower Model: APPLICATORE DI FILM Motor power: 0.1 kW Edge processing unit 4 Unit: Brush Number of motors: 2 Edge processing unit 5 Unit: Top router Number of motors: 1 Edge processing unit 6 Unit: Top router Number of motors: 1 MACHINE DETAILS Installed total power: 12 kW Adhesive system: PUR Pressure type: rubber-coated belts Number of units installed in sizing: 1 Number of units installed in edge processing: 6 EQUIPMENT Spraying unit CE marking

Condition: used, Year of construction: 2013, total length: 4,800 mm, total height: 1,700 mm, total width: 900 mm, Weight: 1.250 kg Price: On request Edgebander Serial number: 200.04.007.13 400V Crsdpfx Abowlv D Ns Tjk 11kW 3PH 50HZ 28A multifunction trimming unit Glue unit Workpiece height 8-60mm - Year: 2013 - Documentation available: No - CE certificate present: No - Serial number: 200.04.007.13 - Transport dimensions: 4800mm x 900mm x 1700mm (l x w x h) - Transport weight [kg]: 1250kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Cedevvkfdspfx Ab Tjrk

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 020313L, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, pressure: 7 bar, Description: Solid steel construction for high machine stability. Workpiece feed via sliding transport chain with plastic plates. Upper pressure fitted with two rows of rubber-coated rollers. Manual adjustment of upper pressure with automatic positioning of the units according to the changed workpiece thickness. Mechanical digital display of panel thickness. PLC for on/off control of the motor and glue pot. Glue pot with standby function for temperature control. Start/stop function for all motors. End trimming unit for 3 mm edging rolls. Support tray for edging rolls with up to 800 mm diameter. Central dust extraction. Roller rail as workpiece support along the entire machine. Safety cover over all processing units. Control panel, including emergency stop and lockable main switch. Transformer for 24V auxiliary circuit. Jointing milling unit before the gluing section, for preparing the workpiece edge for adhesive application. With adjustable infeed fence. Maximum material removal 2 mm. 2 motors at 1.1 kW each, 12,000 rpm, max. material removal 2 mm, extraction port Ø 120 mm, incl. 2 WIDIA cutting tools. Gluing section for hot-melt adhesive with fast heating and adhesive application roller. System for temperature control and recycling of excess hot-melt adhesive. Power requirement 3.5 kW, capacity 1.5 kg, heating time approx. 15 min., depending on ambient temperature and adhesive. End trimming unit With 1 saw blade for trimming front and rear edge overhangs at a 90° angle, flush to the workpiece. Trimming for the front and rear overhangs can be controlled individually as needed. Motor: 0.35 kW. Saw blade speed: 12,000 rpm. Flush milling unit With 2 motors for milling a radius or chamfer on the top, bottom, and/or front edge. Vertical and horizontal motor adjustment on hardened steel guide rails and ball bearings. Three manually adjustable positions for different edge thicknesses. Motor not tiltable. Unit complete with WIDIA cutting tools 2/3 mm. 2 motors, 0.55 kW each, 12,000 rpm. Diamond cutting tools, 68mm Z6, R=2. Profile scraper knife Flat scraper knife Buffing unit Technical data: Edging strip thickness (manual feed) max: 5x45 mm Pre-milled panel thickness: 10 - 40 mm Unmilled panel thickness: 10 - 60 mm Max. height melamine edging: 65 mm Max. height ABS edging: thickness 0.4-2 mm = 65 mm; thickness 2-3 mm = 40 mm Max. edge overhang top/bottom: 2 mm each Minimum workpiece width with roll material: 90 mm Minimum workpiece length with roll material: 160 mm Adhesive temperature: 190°-210° Feed speed: 8 m/min Inverter: 200 Hz Csdpfx Asxn Hzbob Tsrk Compressed air: 7 bar Extraction nozzle Ø: 2x 60 mm CE standard

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, feed rate X-axis: 20 m/min, workpiece height (max.): 60 mm, edge thickness (max.): 12 mm, Equipment: CE marking, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. feed speed: 20 m/min Panel height min.: 8 mm Panel height max.: 60 mm Panel length min.: 150 mm Panel width min.: 65 mm Edge thickness min.: 0.3 mm Edge thickness max.: 12 mm Pre-cutting unit Unit: Corrections Edge pre-heating lamps Glue application system Glue pot for polyurethane adhesive Pre-melter for polyurethane adhesive Edge pressure roller track Number of pressure rollers: 6 End trimming unit Model: 08.415 Number of motors: 2 Motor power: 0.66 kW Max. speed: 12,000 rpm Top/bottom trimming unit Model: 08.0555 Number of motors: 2 Motor power: 1 kW Multifunctional unit Model: SKF-L Number of motors: 4 Codpjxxaucsfx Ab Tsrk Max. machining speed: 20 m/min Motor power: 0.18 + 0.400 kW Speed: 12,000 rpm Edge scraping unit Model: 08.519 Glue scraping unit Model: 08.521 Buffing unit Model: 08.617-2 Number of motors: 2 Motor power: 0.18 kW MACHINE DETAILS Number of operating units: 8 Adhesive system: PUR Control system: WINDOWS EQUIPMENT Programming software for the machine: ICOS open TS CE marking

Condition: used, Year of construction: 2001, Edge thickness 0.2 - 6 mm Workpiece dimensions Width min. 70 mm Height min. / max. 8 / 42 mm Length min. 150 mm (strip edges) Feed speed: 12 m/min Glue application roller Machine dimensions L x W x H = 3500 x 900 - 1300 x 1250 mm Weight: approx. 1130 kg Power consumption: approx. 6.0 kW, 400 V, 50 Hz Equipment: - Double top pressure with manual height adjustment - Automatic magazine for roll edges up to 800 mm DM - Rapid heating tank with application roller in synchronous and counter-rotating direction - Pneumatic adjustment and resetting of all work units - Pneumatic cross-cutting shears for strip edges up to 3 mm - Manually adjustable infeed ruler - Double cross-cut saw 2 HF motors 0.2 kW, 12,000 n 2 automatic Positions = 0 + 3 degrees - Milling/flush trimming unit with two HF motors 0.43 kW, 12,000 n. Two-sided scanning with two HF indexable cutter heads. Radius scraper, automatically controlled. Flat scraper, automatically controlled. Codpfsvvkfqsx Ab Tork Storage location: Nattheim

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, feed rate X-axis: 40 m/min, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, workpiece width (max.): 3,000 mm, rotational speed (max.): 6,000 rpm, TECHNICAL DETAILS Max. feed speed: 40 m/min Panel width min.: 240 mm Panel width max.: 3,000 mm Panel height min.: 8 mm Panel height max.: 60 mm Min. edge thickness: 0.4 mm Max. edge thickness: 3.5 mm UNITS Format Cutting Unit Unit: Double top and bottom pre-milling unit Model: KD 11 Motor power: 4.5 kW Max. speed: 6,000 rpm Magazine for edge tape Number of positions: 12 Gluing system Glue pot for polyurethane adhesive Pre-melter for polyurethane adhesive Edge pressure roller conveyor Edge Processing Unit 1 Unit: End trimming Number of motors: 2 Edge Processing Unit 2 Unit: Top milling unit Number of motors: 2 Edge Processing Unit 3 Unit: Edge trimming unit Number of motors: 2 Edge Processing Unit 4 Unit: Edge trimming unit Number of motors: 2 Csdpfxoxxal Io Ab Tork Edge Processing Unit 5 Unit: Top milling unit Number of motors: 2 automatic engagement by time Edge Processing Unit 6 Unit: Edge scraper Edge Processing Unit 7 Unit: Glue scraper Edge Processing Unit 8 Unit: Brush Number of motors: 2 FEATURES PUR gluing system

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Storage location: Nattheim Crsdpjvvkfwefx Ab Tek

Condition: used, Year of construction: 2006, EVA glueing, 2 pressure rollers, cross-cutting station, pre-milling cutter and rounding cutter, surface scraper, transport device Codpevvkg Ijfx Ab Tsrk Storage location: Nattheim

Condition: used, Year of construction: 2022, Incl. 2nd glue pot. Glue thickness for roll edges: 0.4 - 3 mm. Glue thickness for strip edges: 5 mm. Min. - Max. workpiece height: 8 - 50 mm. Feed speed: 9 m/min. Pre-milling unit. Glue unit. Trimming unit. Rounding unit. Flush trimming unit. Radius scraper. Flat scraper. Buffing unit. Spraying unit. Codpjw Aig Ssfx Ab Tork Storage location: Customer.