Used Edge Banding for sale (6,971)

Condition: used, Holz Her UNO 1303 + PU Edge thickness 0.4 -3 mm (6 mm) Control panel with selector switches for setting the units Fully automatic edge magazine for rolls and strips Adhesive application station: cartridges + PU gluing Workpiece height 6-55 mm Pneumatic pressure unit Cutting unit for rolls and strips up to 3 mm (6 mm) edge thickness with adjustment of 0-10° angle of the cutting saws Milling unit, flush milling, radius milling, bevel milling - 15° Duedsxlz Nzspfx Afnol Scraping unit for bevels and radii Surface scraping unit - finish Machine is CHECKED in TOP CONDITION from a very well-maintained craft business from the Lieboch warehouse

Condition: used, Year of construction: 2015, functionality: fully functional, total length: 7,920 mm, workpiece height (max.): 60 mm, warranty duration: 3 months, HOLZ-HER Edgebander ACCURA 1556 premium with intelligent equipment package for edge thicknesses up to 15mm. Simple program changeover and tool adjustment via the 18.5" touch control panel. Short heating time for the GlueJet adhesive system of approx. 2 to 3 minutes, depending on adhesive type and ambient temperature. Always fresh glue thanks to the GlueJet application system and glue cartridges. Changing PUR adhesive and cleaning the system is quick and easy within a few minutes. Axis adjustment via high-precision, repeatable servo motors. Special configuration for materials with protective film, such as high-gloss and supermatt surfaces! One of the true highlights of this machine is the multifunction package, which shows its strengths in companies processing a wide variety of edges. The DIA tools are constructed in multiple stages and can switch between radii and bevels as needed – from the longitudinal milling unit to corner copying and the profile scraper. The pull-out workpiece support and the extended infeed area facilitate processing of large workpieces, and a guide system assists in feeding small parts into the machine. Edging thickness (coil material): 0.4 – 3 mm (depending on material) Dusdpfx Ajx Emf Dofnol Edging thickness (strips): 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Workpiece width: min. 65 mm Feed speed: 10 – 25 m/min Glue application with GlueJet in EVA and PUR, with minimal effort required. All common edge types, including high-gloss, supermatt, and solid wood edges up to 15mm. iTronic – pressure and glue quantity control Prepared for connection to a RETURN system Motorized pressure bridge with upper belt drive Multifunction units for rapid changeover between radius, flush, and bevel processing Vertical & horizontal spray systems and much more.

Condition: used, Year of construction: 2017, Used machine Year of manufacture: 2017 Equipment and technical specifications: Factory-refurbished by Lange Maschinenbau Minimum workpiece width: approx. 75 mm Dujdow Sbblepfx Afnsl Workpiece thickness: 8 - 50 mm Minimum workpiece length: approx. 120 mm / 180 mm for corner copying Edge thickness: 0.4 - 2 mm Jointing unit shaving removal: 0 - 2.0 mm, infinitely adjustable Jointing unit with 2 counter-rotating, application-controlled jointing motors Diamond tooling height = 55 mm Direct glue application to the workpiece Glue pot with 1.5 kg capacity EVA/PUR glue pot with discharge function Pressure unit End trimming unit with high-frequency motor, 2 saw blades and high-precision linear guides Combined milling station for radius and bevel milling Corner copying unit Flush trimming unit Extraction pipe system with 90° bend and manual slide valve mounted on the machine Machine length: 3273 mm Dimensions: 320x110x200 Availability: short-term Location: Flörsheim

Condition: ready for operation (used), Year of construction: 2008, Brandt Optimat KDF 420 Edge Banding Machine Powercontrol PC 20 control system Edging thickness: 0.4–8 mm Edging height: 8–60 mm Joint trimming with DIA cutter End trimming Flush and radius trimming Radius scraper blade Flat scraper blade Buffing unit Duodpfx Aox Dzw Nsfnel Machine length: 4360 mm Operating manual and tools included Year of manufacture: 2008 Price: 15,000.-

Condition: new, Year of construction: 2013, 0,4 - 15 mm Workingpiece thickness from to 10 - 60 mm Dusdpfx Afsx Dng Ronjl Feed speed 18 m/min.

Year of construction: 1999, condition: good (used), Edge banding machine IMA Compact MFA / F / 5212 Year of manufacture 1999 S/N 06601 max. edgebanding thickness:12 mm min. workpiece thickness:10 mm max. thickness of roll material:3 mm feeding speed : 12 m/min adjustment of the jointing ruler : manual heating time : 10 min Joining unit : Yes, with 2 milling units Automatic roll magazine : Yes Cross cut shear up to : 0.2 - 3.0 mm Dujdpeia Naqsfx Afnjl Solid edge magazine : Yes Preheating of the board by radiant heater autom. gluing with glue tank granulate crosscut saw angle setting by program Multifunctional unit rounding unit/corner copying 2 motors Profile scraper Flat scraper Buffing unit Aggregate display mech.numerical display Control mode via control panel operation selector switch/ push buttons protective hood weight approx.2500 kg Dimension L x W x H 6500 x 1000 x 1600 mm CE marked technical data under reserve

Condition: used, OTT Tornado - TOP Control system - via a 15-inch color touch monitor for full automation and maximum operating convenience. CM-CombiMelt gluing system suitable for processing EVA and PUR hot melt adhesives as well as all standard cleaning granulates. Joint processing unit for edging chipboard panels. Automatic roll magazine. Automatic edge magazine. Double end trimming unit with automatic 0° / 3° swivel. Flush milling unit for flush trimming - 12mm. Fine radius milling - profile knives R2 - R5. Automated copying milling - corner rounding. Scraper unit - radius / bevel. Surface scraper unit. Sliding agent spray unit - PU. Cleaning set with fine polishing unit. Very stable workpiece support with roller conveyors - FRONT with scissor extension. Complete set of tools included. Machine is AS NEW in EXTREMELY WELL-MAINTAINED CONDITION. First commissioning in 2009, very few operating hours, approx. 1600. Dedpfx Afsxy Iw Uoneul Machine from lease return / leasing option available. Ex stock Lieboch.

Condition: new, Year of construction: 2025, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edgebanding in demanding craft operations. The F 5 guarantees edgebanding in all steps, as it is equipped with all the components you need to meet your requirements: Joint trimmer, cross-cut saw, trimming unit, radius scraper, corner trimmer, surface scraper, fettling station. For even more flexibility on the way to the perfect finish, the F 5 can be optionally equipped with a practical multi-radius scraper. max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Dsdpfx Ajlht Hwefnjul Equipment: Hebrock F5 Next - 10 m/min Edge banding machine F5 Next With PLC control (incl. touchscreen) and with hot-melt glue application to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide tool) up to 2 mm cutter depth, maintenance-free glue tray with change tray pre-equipment incl. glue discharge device, HF cross-cut saw station (approx. 12000 rpm), HF trimming station (approx. 12000 rpm) with separate pneumatic routing adjustment and exchangeable panel router (combination version), corner rounding router, radius scraper, surface scraper (incl. pneumatic lift), cleaning station, robust chain drive, ball bearing mounted double roller top pressure, viewing window from the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. F5/08/4 Quick-change attachment for corner router F5/08/5 additional exchangeable motor corner router with tool assembly F5/09/4 Multi-radius scraper (R1/R2) F5/24/1 Spraying device for release agent F5/24/2 Spraying device for cleaning agent F5/25 Edge spraying device F5/27. nesting for router and radius scraper F5/30. Pneumatic 3-point adjustment (radius, chamfer, flush trimming) Location: From stock 54634 Bitburg - available in CW4 -

Condition: used, Year of construction: 2006, Used machine Year of manufacture: 2006 Condition: completely overhauled Equipment and technical data: - fitted with new glue application system - manually adjustable infeed fence - milling unit 1961 - edge feeder 1903 - glue application station 1906 with tracking nozzle - pressure unit 1816, pneumatic - end trimming unit 1822 - milling unit 1942 M for radius, chamfer, flush trimming - complete air nozzle - scraper unit 1929 - chip collection box - surface scraper 1964 - extraction hood set - complete safety covers - total length: 5,291 mm - workpiece thickness: min. 6 / max. 50 mm - edge band thickness depending on configuration: 0.4–5 mm - max. edge band height: 55 mm - minimum edge band strip length: 350 mm - max. edge band overhang/height per side: 3 mm - minimum workpiece width: 60 mm - minimum workpiece length: 180 mm Duodpfx Ajwka H Ssfnjl - feed speed: 12.5 m/min - extraction: - jointing/milling unit: 900 m³/h - milling unit: 280 m³/h - scraper unit: 280 m³/h - static vacuum: - jointing/milling unit: 1,490 Pa - milling unit: 1,650 Pa - minimum air velocity: 20 m/sec - jointing/milling unit connection: 70 mm - scraper unit connection: 70 mm - compressed air: 6 bar Availability: short notice Location: Röllbach

Condition: good (used), Year of construction: 2010, 0,4 - 5 mm Workingpiece thickness from to 8 - 60 mm Total length 2814 mm Feed speed 11 m/min. Dedpfoxylpusx Afnjul

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Double-sided edgebander Stefani Evolution C Year of production: 2012 Technical condition: very good The Stefani Evolution C is designed for precise edging of straight and profiled edges of furniture panels made from various materials such as particle board, MDF, or plywood. Thanks to its advanced functions and high-quality construction, this machine ensures excellent results in the production of office, kitchen, and bathroom furniture as well as other interior furnishing components. Dsdpfx Afou U N Agonjul Working width max: 3200 mm Working width min: 225 mm PC control Software: Stefani Winedge Plus v06.14.000 Longitudinal processing Cross processing

Condition: used, Year of construction: 2016, MACHINING CAPACITIES: - Panel height (thickness) to be processed: 8 to 60 mm 10 to 45 mm when using the corner rounding unit - Panel length: >=220 mm - Panel width: 90 to 1100 mm - Feed (advance speed): 11 m/min - Workpiece overhang: mm - Minimum-maximum dimensions for panel radiusing: Ø x mm - Panel overhang relative to the conveyor belt: - Max spindle cutting depth: mm² - Workpiece gap: mm Roll edging: - Thickness: 0.4 to 3 mm - Width (height): panel thickness +4 mm - Minimum length: 200 mm Strip edging: - Maximum thickness: 6 mm maximum 3 mm with corner rounding unit - Width (height): panel thickness +4 mm - Minimum length: 220 mm 280 mm with corner rounding MACHINE CONFIGURATION: - Unwinding table, usable Ø795 mm - Working table: L 4.15m / H 91.5 cm With 500 mm front extension - Chain feed conveyor - Anti-adhesive spray system - Edge trimming units (2 spindles) 12,000 rpm Duodpfx Asx Dcn Njfnol - Gluing station with interchangeable glue pot, 180-200°C Pneumatic pre-cut guillotine Pressure section with 3 rollers, 1 of which is motorized - End-trimming aggregate with 2 blades, 12,000 rpm - Top/bottom flush trimming unit with copying pads - Corner rounding unit - Radius scrapers - Straight scrapers Digital counters for settings (type SIKO) OTHER FEATURES: - Main power supply: 400V, 3-phase, 50Hz, IN 21A - Feed motor: 0.75 kW - Spindle motors: 2 x 1.5 kW - Saw motors: 2 x 0.19 kW - Trimming (milling) motors: 2 x 0.55 kW, rpm - Pneumatic supply: 8–10 bar, dry air Required working pressure: 6 bar - Extraction ports: 3 x Ø75 mm int. + 2 x Ø50 mm int. + Ø95 mm int. Required volume flow: 1600 m³/h - CE marking, lockable safety switch, emergency stop push buttons Operating dimensions: 4.45 x 1.70 x h.1.80 m Transport dimensions (L x W x H): 4.25 x 0.90 x h.1.50 m Weight: 1430 kg

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 36956, total length: 9,800 mm, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, overall weight: 600 kg, plate height: 1,060 mm, TECHNICAL DETAILS Workpiece height: 60 mm Edge thickness: up to 3 mm Minimum panel width: 55 mm Minimum panel length: 100 mm Panel height: 1,060 mm Tool interface: ISO 30 MACHINE DETAILS Dimensions & weight Total length: 9,800 mm Weight: 600 kg Djdpfx Afsx A Tzqsnsul Input frequency: 50 Hz EQUIPMENT Return system Operates with PUR adhesive Spray system Pre-milling unit RT 20 Gluing unit SP 20 6-position edge magazine End trimming unit IT 90-S Rough milling unit RS 10 Fine trimming unit RF 40 Note: Further information regarding equipment can be found on the attached machine data sheet.

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only inexpensive and space-saving. It also has the equipment you need to process perfect edges right from the start: diamond-tipped jointing cutters guarantee excellently prepared workpieces for edging. The equipment includes a jointing unit (up to a milling depth of 2 mm), the top-mounted fast heating glue container, cross-cut saw and combination router. Optionally, the F 2 can also be equipped with a surface scraper. Djdpfji Am U Dsx Afnoul max. edge thickness: 3 mm max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: F2 - 10 m/min Edge banding machine F2 next With PLC control (incl. touch screen) and hot-melt adhesive indication to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide - tool) up to 2 mm milling depth, maintenance-free glue basin with exchangeable basin pre-equipment incl. adhesive discharge device, HF cross-cut saw station (approx. 12000 rpm), HF-milling station (approx. 12000 rpm) with separate pneumatic milling adjustment and interchangeable plate cutter (combi design), robust chain drive, ball bearing mounted double roller top pressure, viewing window from rear side of machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 undercarriage F2/30 pneumatic 3-point adjustment (radius- ,chamfer-, flush milling)

Condition: used, Year of construction: 2004, Used machine Year of manufacture: 2004 with gluing unit for hot-melt adhesive granules Glue reservoir located below the glue roller Glue application to the workpiece via glue roller in both co-rotating and counter-rotating modes automatic edge magazine for coil material and fixed lengths Pressure zone with pneumatically-driven main pressure roller and special post-pressure rollers to compact the upper and lower glue joint Centrally adjustable upper pressure Central manual chain conveyor lubrication Control panel at machine infeed End trimming unit (saw aggregates) for front and rear edge overhang with high-precision linear guides 2 motors, each 0.18 kW Swivel range for straight and bevel cutting 0–15 degrees Dusdpjxya Rtofx Afnjl Flush-milling unit, top and bottom, with vertical and horizontal tracing Swivel range 0–15 degrees with 2 milling motors, each with replaceable insert cutter combinations (straight/radius) Digital counters enable rapid and precise, i.e., repeatable, settings Two-point pneumatic adjustment for upper and lower milling motors Scraper unit for finishing processing with horizontal/vertical tracing Support table extendable up to 350 mm Integrated section control for contactless operation of processing functions. Settings via keyboard and LED display Workpiece thickness: 8–50 mm Edge thickness: 0.4–3 mm Feed speed: approx. 9 m/min Connected load: 4.1 kW Compressed air connection: 6 bar Weight: approx. 750 kg Machine length: 3,150 mm Availability: short term Location: Flörsheim

Condition: used, Year of construction: 2016, functionality: fully functional, overall weight: 450 kg, type of input current: three-phase, height adjustment type: mechanical, input voltage: 400 V, – Italian production – year of production 2016 – pre-milling – DTR, CE TECHNICAL PARAMETERS: – edge thickness: 0.5 - 3 mm – wooden edgeband: 0.5 - 5 mm – element height: 8 - 50 mm – minimum edgebanding length: 160 mm – minimum board width: 110 mm – feed speed: 7 m/min – pre-milling – radial cutters – edge cutting – radial scraper – straight scraper – blower for each unit – working pressure: 8 bar – working machine length: 2030 mm – transport dimensions (length/width/height): 330/80/125 cm – weight: 450 kg Dsdpswb Ha Tjfx Afnjul

Condition: like new (used), Year of construction: 2022, - TOP condition (as new) - 21" SMART-Touch - Panel thickness: 8 - 60 mm - Edgebanding tape thickness: 0.4 - 3 mm - Solid edging: 0.8 - 12 mm - Guillotine shears for tape material up to 3 mm - Minimum workpiece length: 140 mm - Feed speed: 12 m/min - Automatic lubrication for feed chain and guideways Dedpsx A E Hlofx Afnsul - Pneumatically controlled infeed stop for workpiece spacing - Upper pressure unit motor-adjustable via PLC with double-row smooth upper pressure rollers - Segmented, rubberized support pads on the transport chain with quick-change system - Motorized infeed fence adjustable to jointing dimensions via PLC - Extendable workpiece support - Jointing unit with plunge-controlled milling, 2 x 2.2 kW - Jointing cutter D=80 mm, SB=64 mm with DIA indexable inserts - Teflon-coated gluing unit with synchronized glue roller, switchable for with/against feed direction, suitable for processing EVA and PUR adhesives - Pneumatically controlled pressure unit with 1 driven pressure roller and 2 conical follow-up rollers - Edge thickness adjustment via PLC - End trimming unit with 2 motors - Flush/chamfer/radius milling unit (top/bottom) with position control via PLC - Corner rounding unit with motorized adjustment for post and soft-forming profiles, operation-controlled - Radius scraper unit R2/R3 - Surface scraper unit, pneumatically controlled with nesting execution - Buffing unit - Separator agent spraying - Sliding agent spraying - Cleaning agent spraying

Condition: excellent (used), functionality: fully functional, EDGE BANDING machine model BIESSE AKRON 245 second hand machine CE regulation : Yes with Instruction Booklets for the application of edges in wood, pvc, veneer, melamine, abs for furniture, furnishings, kitchens, bathrooms, doors, panels and various NC 321 electronic positioner Technical data: min. height of gluing panel mm.10 max. height of gluing panel mm.45 min. thickness roll edge mm.0.4 max. thickness roll edge mm.3 max. thickness wood edge mm.8 min. panel width mm.50 min. panel length mm.150 feed speed motor power Hp 2 electric press lift telescopic support for large panels soundproof cabin Composition: gluing group with glue tank pressure rollers edge feeder end-cutting unit for front and rear vertical cutting of the excess edge n.2 motors trimming unit with overlapping motors for trimming the upper and lower part of the excess edge . n.2 motors tilting trimming unit for the final upper and lower trimming of the excess edge . n.2 motors glue scraper group for cleaning glue residues overlapping brush group for brushing and polishing the applied edges . n.2 tiltable motors Dusdogipk Aspfx Afnol Compressed air 7-8 bar Weight kg 1700

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only inexpensive and space-saving. It also has the equipment you need to process perfect edges right from the start: diamond-tipped jointing cutters guarantee excellently prepared workpieces for edging. The equipment includes a jointing unit (up to a milling depth of 2 mm), the top-mounted fast heating glue container, cross-cut saw and combination router. Optionally, the F 2 can also be equipped with a surface scraper. max. edge thickness: 3 mm max. workpiece thickness: 50 mm Ready for operation in 3.5 min Dujdpfx Afelht Hzjnsl Equipment: F2 - 10 m/min Edge banding machine F2 next With PLC control (incl. touch screen) and hot-melt adhesive indication to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide - tool) up to 2 mm milling depth, maintenance-free glue basin with exchangeable basin pre-equipment incl. adhesive discharge device, HF cross-cut saw station (approx. 12000 rpm), HF-milling station (approx. 12000 rpm) with separate pneumatic milling adjustment and interchangeable plate cutter (combi design), robust chain drive, ball bearing mounted double roller top pressure, viewing window from rear side of machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 undercarriage F2/30 pneumatic 3-point adjustment (radius- ,chamfer-, flush milling)

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Equipment and technical specifications: - Round tank glue application unit - Feed unit with automatic edge band magazine - Pressure zone with multiple pressure rollers - End trimming: 2 motorized saw units for front/end trimming - Top/bottom milling units: 2 milling units with copy wheels for radius or chamfer - Radius scraper: pneumatically controlled, for post-processing radii - Surface scraper: for smoothing the edge surfaces - Buffing unit: 2 buffing wheels with motors for final finishing - Riepe spraying device - Control: PLC with operator panel - Feed frequency inverter replaced by Ott in 2022 - Feed speed approx. 10–12 m/min - Workpiece thickness up to 52 mm - Edge thickness 0.3 – 12 mm - Power supply 3x 400 V AC, 50 Hz - Rated power 12.7 kW - Rated current 30.5 A - Control voltage 24 V DC - Max. fuse protection 35 A (5x 6 mm² connection cable) Machine dimensions: approx. 6120x840x1385 mm Duedexdpm Sspfx Afnsl Machine weight: approx. 3,000 kg Availability: Short notice Location: Bavaria

Condition: new, Year of construction: 2025, Hebrock F 4 For complete processing of your panels For all those who don't want to do things by halves. With the F 4, we offer you a model with which you can produce fully processed edges on a machine length of just 4 m. The F 4 is not only space-saving, but also extremely attractive in terms of price-performance ratio. Max. Edge thickness 3 mm Min/Max. Workpiece thickness 8 - 50 mm Min. workpiece length approx. 160 mm Feed speed approx. 7 m/min. Ready for operation approx. 3.5 min. Max. Power consumption Ø approx. 7.4 kW Electrical connection 400 V - 3 Ph - 50 Hz Work table height approx. 900 mm Machine dimensions approx. 4050 x 1300 x 1400 mm (LxWxH) Weight approx. 820 kg Suction nozzle Ø 1 x 140 mm PLC control 10″ touchscreen Top-mounted rapid-heat adhesive container (maintenance-free) Support plate for edging material Automatic central lubrication (cross-cut saw, corner router) Visual display for workpiece sequence Extension arm (can be pulled out to the front) Interchangeable basin pre-equipment incl. adhesive changing device for PUR processing Surface scraper with dual tracing Pneumatic roller capping (scissor cut design, Hebrock system) Double roller top pressure (ball bearing) Transport chain with bolted special chain plates Jointing cutter Milling unit cross-cut saw Duodpfx Afehqadcenol Corner cutter Accessories: F4/09 Radius scraper (incl. pneumatic lift) F4/09/4 Multi radius scraper (R1/R2) F4/30 Pneumatic 3-point adjustment Location: From stock 54634 Bitburg - available at short notice -

Condition: like new (used), Year of construction: 2022, E450PM - AUTOMATIC EDGE BANDING MACHINE V000047 LME450PM-5 with joint trimming unit Machine in excellent condition VOLTAGE 400/50/3 CONTROL WITH 7" TOUCH SCREEN EXCHANGEABLE GLUING UNIT VR - MULTIFUNCTION TRIMMING UNIT Tool for straight/radius trimming TOOL KIT R=2 mm FLAT SCRAPER RELEASE AGENT UNIT LED INTERNAL LIGHTING Dedpjxac Hwsfx Afnoul DOCUMENTATION IN GERMAN INFRARED LAMP for panel pre-heating SCRAPER UNIT Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, The Hebrock K 36 Top equipment with motorized adjustment - Exhibition piece - New machine - - immediately available - This Hebrock endurance racer offers unimagined possibilities. Developed for the highest demands, the K 36 stands for absolute reliability and productivity in daily use. With the option of equipping the machine with a step cutter and a multi-radius scraper, Hebrock is setting new standards in the field of perfect edge processing of various edge thicknesses. max. edge thickness: 3 mm max. workpiece thickness: 60 mm Ready for operation in 6 min. Max. Edge thickness 3 mm Min/Max. Workpiece thickness 8 - 60 mm Min. workpiece length approx. 140 mm Feed speed approx. 15 m/min. Ready for operation approx. 6 min. Max. Power consumption Ø approx. 7.4 kW Electrical connection 400 V - 3 Ph - 50 Hz Work table height approx. 900 mm Machine dimensions approx. 5250 x 1230 x 1430 mm (LxWxH) Weight 1750 kg Dsdpfx Asi Am Ukefneul Equipment: Hebrock K 36 - 15 m/min Edge banding machine K36 With PLC control (incl. 15'' touch screen), hot melt adhesive application to the workpiece workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide tool) up to 3 mm routing depth, maintenance-free, coated glue tray with HF double-motor cross-cut saw station (approx. 12000 rpm), HF trimming station (approx. 12000 rpm) with pneumatic trimming adjustment and interchangeable panel trimmer (combi version), corner rounding trimmer, radius scraper, surface scraper (incl. cleaning station, robust chain drive, ball-bearing mounted double roller top pressure, unit viewing window from the rear of the machine and operator side, signal lamp for workpiece sequence, extendable workpiece support, feed approx. 15 m. support, feed rate approx. 15 m/min, gluing up to 60 mm workpiece thickness 36/08/1 Quick-change equipment for corner router 36/08/2/1 additional exchangeable motor corner router R=1 36/09/1 Multi-radius scraper 36/24/1 Release agent spraying device 36/24/2 Cleaning agent spraying device 36/25 Protective spraying edge 36/27 Nesting (1x milling station + 1 x radius scraper) 36/30 Pneumatic 3-point adjustment 36/30/1 Multitool for HF milling station (R2/R1/bevel) 36/45 Axis package Motorized adjustment of panel, edge thickness and joint milling depth jointing depth adjustment Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edgebanding in demanding craft operations. The F 5 guarantees edgebanding in all steps, as it is equipped with all the components you need to meet your requirements: Joint trimmer, cross-cut saw, trimming unit, radius scraper, corner trimmer, surface scraper, fettling station. For even more flexibility on the way to the perfect finish, the F 5 can be optionally equipped with a practical multi-radius scraper. max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: Hebrock F5 Next - 10 m/min Edge banding machine F5 Next With PLC control (incl. touchscreen) and with hot-melt glue application to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide tool) up to 2 mm cutter depth, maintenance-free glue tray with change tray pre-equipment incl. glue discharge device, HF cross-cut saw station (approx. 12000 rpm), HF trimming station (approx. 12000 rpm) with separate pneumatic routing adjustment and exchangeable panel router (combination version), corner rounding router, radius scraper, surface scraper (incl. pneumatic lift), cleaning station, robust chain drive, ball bearing mounted double roller top pressure, viewing window from the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. F5/08/4 Quick-change attachment for corner router F5/08/5 additional exchangeable motor corner router with tool assembly F5/09/4 Multi-radius scraper (R1/R2) F5/24/1 Spraying device for release agent F5/24/2 Spraying device for cleaning agent Dusdpfx Afei Anadenjl F5/25 Edge spraying device F5/27. nesting for router and radius scraper F5/30. Pneumatic 3-point adjustment (radius, chamfer, flush trimming) Location: ex stock 54634 Bitburg Available in calendar weeks: 4/2024

Year of construction: 1985, condition: excellent (used), Edge gluing press for veneer, solid wood and plastic, model HFK 2200, for trimming edges during press time. Dedpfx Ajw Apqqefnjul When using heat-curing glue, we achieve pressing times of 20 to 30 seconds for veneer edges. Maximum working size approx.: 1,400 x 2,500 mm Heating: 1.7 kW Electro-pneumatic edge press Haug HFK 2200 for pressing edging material onto wood, with heating. 3 table extensions Swiveling work table Location: ex stock 54634 Bitburg - immediately available -