Used Edge Banding for sale (7,301)

Condition: ready for operation (used), Year of construction: 1996, An edge banding line including feeding, turning device and an automatic drilling machine is available. The longitudinal machine enables the processing of thick edges and is equipped with new units and controls. The transverse machine can only process thin edges as there is no coupling unit. The machine was operated at up to 28 cycles per minute. Control system: Imatronic 150, documentation is available. Control system: Imatronic 150, including spare parts and tools. Documentation is available. Dedpotryktjfx Af Iscn

Condition: excellent (used), Year of construction: 2009, I sell the edge banding machine BIESSE Akron 425 A-R Year 2009 Configuration: Edge height 8 - 65 mm Edge thickness 0,4 - 8 (12) mm Edge banding, End cutting saws pneumatic adjustable Tilting milling Dedpfx Afeiu U Swj Iecn Radius scrapers R2 Polishing brushes Hot-air blower TOP condition, possible to test !

Condition: excellent (used), Year of construction: 2012, operating hours: 730 h, Edge banding machine Hebrock AKV3005DK-F with pre-milling, corner copying, and two scraper blades. Dcodpfx Astpn Etef Isn Very well-maintained machine from a small workshop in excellent condition. Touch-screen interface with PLC control for easy operation, up to 12 user programs can be saved. Edge thickness (roll): approx. 0.4 - 3mm Workpiece height: approx. 8 - 53mm Feed rate: approx. 10m/min Noise protection hood Extendable workpiece support, special feature, extendable up to 950mm Extraction ports: 80 + 140mm Units: Quick-change glue pot with glue outlet, two glue pots included (one used for EVA glue, one for PU glue). The PU glue pot is practically as new, having only been used for a single job. Top pressure manual adjustment with SIKO counter Infeed fence manual adjustment with SIKO counter Edge thickness manual adjustment with SIKO counter Pre-milling with Leitz Whispercut diamond cutters, still sharp Gluing unit with automatic edge feed for rolls up to 3mm Pressure zone with 4 rollers Crosscut saw Integrated chip collection container for edge trimmings Combination milling unit, R2, with pneumatic adjustment between thin and thick edge Corner rounding cutter R2, pneumatically adjustable between thin and thick edge The profile cutter can also be used for shelf program, i.e., only the straight edge is rounded and not the corners Radius scraper R2, pneumatically retractable Glue joint scraper, pneumatically retractable Hood lock CE mark Operating manual A video of the machine in operation can be sent on request. All indexable knives in the milling units and the scrapers have been replaced or rotated, saws sharpened. The machine is therefore ready for immediate use. Only the diamond pre-milling cutters (Whispercut) have not been renewed, but are still sharp. Paintwork touch-ups performed. The Hebrock AKV series is the predecessor to the current K series. The machine has only approx. 730 operating hours (glue pot switched on), while the frequency inverters were only powered for approx. 455 hours. The machine is in very good condition, see original photos. Machine dimensions approx. 5000 x 1400 x 1550mm (LxWxH) Weight approx. 1550kg. The machine can be inspected and demonstrated onsite by appointment. We only offer machines that are ready for demonstration in our warehouse; see "more offers from this seller."

Condition: as good as new (ex-display), Pneumatically controlled edge banding machine with 7 units: Jointing cutter unit including AIGNER diamond jointing cutter heads, with DIA quick-change knife system Konstantin and controlled edge air blast nozzle behind the 2nd jointing cutter head. End trimming saw unit with extraction device, including two pneumatically swiveling saw blades, adjustable and programmable from the control panel. Radius milling unit with pneumatic 2-position revolver, adjustable and programmable from the control panel. Includes 2 quick-change motors with R=1mm radius cutters and 2 quick-change motors with R=2mm radius cutters. Corner rounding unit (copy milling unit) with insert table function and pneumatic 2-position revolver, adjustable and programmable from the control panel. The entire unit can be pneumatically engaged/disengaged from the control panel. Includes 1 quick-change motor with R=1mm and 1 quick-change motor with R=2mm. MULTI-radius scraper unit, radius 1mm and radius 2mm, with pneumatic 4-position revolver. The unit can also be pneumatically engaged/disengaged. Includes extraction system with chip collection box for scraper shavings. Dcjdpfew Rd Ixex Af Ijn Flat scraper unit with four-way usable scraper knives. The entire unit can be pneumatically engaged/disengaged. Removed glue residues are extracted. Buffing unit with two ORIGINAL Riepe cloth-sisal-lamella wheels, arranged at an angle, for cleaning and polishing. General features: - Infeed fence with handwheel adjustment (jointing thickness adjustment) and digital readout - Upper pressure beam with digital workpiece thickness display and handwheel adjustment - Pressure zone with digital display and handwheel adjustment - High-gloss package: roller tracing for radius milling unit, radius scraper unit, and flat scraper unit - Large panoramic noise and safety enclosure for all units and the glue tank - Interior lighting - Operator panel with 15'' touchscreen and intuitive operation - USB port for data backup and transfer - Network connection for online support - Controlled pneumatic cylinder for workpiece distance control - Teflon-coated glue tank with quick-change system and energy-saving standby mode - Glue roller with feed auger for long and tall workpieces (especially for PUR adhesive) - Additional quick-change glue tank - Pressure zone with 3 pressure rollers, with the first roller motor-driven - Heavy-duty roller edge shear for edges up to 54 x 3mm - Original RIEPE spray system - Before the jointing cutter unit: LPZ II separating agent - Before the saw unit: LP 289/99 cooling and antistatic agent - Before the milling unit: NFLY lubricant - Before the buffing unit: LP 193/63 cleaning agent Technical data: Edge thickness: 0.4 - 3 mm Min. panel width (without corner rounding unit): 80 mm Min. panel width (with corner rounding unit): 130 mm Min. panel length (without corner rounding unit): 100 mm Min. panel length (with corner rounding unit): 300 mm Min. panel thickness: 10 mm Max. panel thickness: 50 mm Feed speed: 11 m/min Extraction ports: 3 x 150 mm Connection: 9 kW - 400 V / compressed air: 6 bar

Condition: new, Year of construction: 2025, Pre-milling unit: yes Pre-milling unit material removal: 0 - 2 mm plastic edges: 0,4 - 3 mm solid wood edges: 0,5 - 5 mm Workpiece thickness: 8 - 50 mm Minimum length of workpiece: 120 mm Min. work piece width: 110 mm Anti-adhesive spraying unit: yes Edge preheating device: yes / with ceramic infrared lamp Bonding unit: granulat / Glue container quick-change kit Jack knife: yes Flush trimming unit: yes Corner copy unit: yes Flush radius milling unit: yes Radius scraper unit: yes Area scraper unit: yes Buffing unit: yes Dcjdjl D Rx Uspfx Af Ijn Cleaning spray unit: yes motor power: 5 kW machine length: 3774mm machine width: 1546 mm machine height: 1337mm weight: 842 kg

Condition: excellent (used), Year of construction: 2013, Edge banding machine Manufacturer: Brandt Model: KDF 220 Highflex 1220 Year of manufacture: 2013 Edge thickness: 0.4 - 3 mm Djdpfx Ajw N Sb Rjf Ijcn Workpiece thickness: 8 - 50 mm Overall length: approx. 4,150 mm Feed speed: 10 m/min Total power: 9.5 kW Weight: approx. 1,150 kg Jointing unit: Yes End trimming unit: Yes Flush milling unit: Yes Corner rounding unit: Yes Radius scraper: Yes Surface scraper: Yes

Year of construction: 2006, condition: ready for operation (used), Glue type: PUR glue, glue application system: cartridges, max. edge thickness: 25mm, max. workpiece thickness: 60mm, feed rate: 16m/min, min. workpiece length: 140mm, min. workpiece width: 60mm. Including various spare parts and Ligmatec return. Documentation available. On-site inspection is possible. Dsdougmw Ejpfx Af Iocn

Condition: good (used), Year of construction: 2000, I sell the edge banding machine Holz-Her Sprint 1417 year 2000: Premilling Edge banding patron glue End cutting saws Strong flat milling Tilting radius milling Djdpfx Afsd Nukqj Iecn Radius scrapers Corner rounding 1-motor Glue scrapers Polishing brushes New sharpened tools, new display, fully working. CE Mark. Good condition. With full documentation.

Condition: used, Year of construction: 2018, Manufacturer: Lange Maschinenbau Model: B 70 K Used machine Year of manufacture: 2018 Machine for edge heights up to 100 mm! Factory-inspected Dcedpfx Afewka S Is Ien Equipment/features: - Machine table with 13 roller tracks for improved workpiece guidance - Edge feed, synchronised with the belt feed - Adjustable edge thickness via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: 0.25 kW; approx. 1250 mm long; approx. 6.0 m/min; 50 mm wide toothed belt with thick, workpiece-friendly rubber cover. Digital counter for height adjustment - Direct glue application to the workpiece: leak-proof glue pot with supply from below and rapid heat-up time after machine stoppage - End trimming unit for workpiece front and rear edges, automatic sensing on the workpiece, pneumatic trimming with knife for cuttable edges - Flush milling unit with vertical sensing and horizontal guidance, reproducible adjustments via digital counters, two powerful 0.4 kW high-frequency motors, stepless speed control from 4000 to 18000 rpm, cutter Ø 70 mm, Z4, radius 2 mm/15°; central extraction port Ø 100 mm, two chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter with the belt feed - Continuous workpiece support approx. 1800 mm long, support rail can be extended by approx. 300 mm - Rotatable film tray Ø 800 mm Technical Details: - Minimum workpiece width: approx. 80 mm - Workpiece thickness: 10 – 100 mm - Minimum workpiece length: approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Maximum roller separation: 1.0 x 55 mm, 2 x 45 mm - Glue pot heating power: 2.7 kW - Electrical connection: 400V, 50 Hz, 3Ph + N - Total power requirement: 3.8 kW - Heat-up time: approx. 10 minutes - Pneumatic connection: 6 bar - Working height: approx. 880 mm - Dimensions: approx. 1800 x 700 x 1300 mm (without film tray Ø 800 mm) - Net weight: approx. 260 kg Availability: short-term Location: Flörsheim

Condition: as good as new (ex-display), Edge banding machine as demo unit 5 units (aggregates): Joint trimming unit incl. AIGNER diamond joint cutter heads, with Konstantin DIA interchangeable knife system and controlled edge air-blast nozzle behind the second joint cutter head. End trimming unit: 1 motor, 2 saw blades Radius milling unit with Easy Set adjustment system Radius scraper unit, retractable, incl. - Extraction device with chip collection box for scraper shavings - with Easy Set adjustment system - 2 digital readouts Flat scraper unit with 4-way usable scraper blades. The unit is retractable. General features: - High-gloss package: tracing rollers for the radius milling unit, radius scraper unit, and flat scraper unit - Large viewing, noise, and safety enclosure for all processing units and the glue pot - Teflon-coated glue pot with energy-saving mode in standby - Glue application roller with feed screw for long and tall workpieces - Pressure zone with motor-driven 1st steel pressure roller + 1 rubber roller - Reel shear for edging 44 x 2 mm Technical data: Edge thickness: 0.4 – 2 mm Min. panel width: 120 mm Min. panel length: 90 mm Min. panel thickness: 10 mm Max. panel thickness: 40 mm Feed speed: 7 m/min Extraction connections: 3 x 150 mm Dsdpjw Rcmyjfx Af Iscn Connection: 8 kW - 400 V / pneumatic: 6 bar

Condition: new, Year of construction: 2025, Joining unit: Yes Edge thickness: maximum 3mm Workpiece thickness: from 8mm - 50mm Workpiece width: minimum 110mm Glue basin: granular, quick change basin cross-cut shear: yes cross-cutting / flush sawing: yes Milling station: chamfer / radius corner copying: yes Flat - scraper: yes Radius scraper: Yes Buff: Yes Non-stick spray unit: Yes Infeed ruler adjustment: manual workpiece thickness adjustment: manual power input: 5 kW Dcjdpfxok Eai Ue Af Isn machine length: 3314 mm Machine width: 1085 mm Weight: 545 kg

Condition: excellent (used), Year of construction: 2018, Edge bander Manufacturer: Felder Type: G360 Year of manufacture: 2018 Operating hours: approx. 1,288 h Edge thickness: 0.4 - 3 mm Workpiece thickness: 10 - 45 mm Feed: 8 m/min Total power: 5.5 kW Total length: approx. 3,200 mm Jointing unit: Yes Cross-cut saw unit: Yes Flush milling unit: Yes Surface scraper: Yes Dcjdpfxewrqk Do Af Ion

Condition: good (used), Year of construction: 1999, functionality: fully functional, Pacific P V 12 - F, year 1999 Power: 12.5 kW Edge thickness: 0.2–12 mm Feed: 12 m/min Glue application roller, synchronous and counter-rotating Automatic infeed fence Jointing/edge trimming End trimming up to 3 mm Flush milling at 15°, 30°, 45° Radius milling R 2 – R 5 Flush sawing Corner rounding Radius scraper blade Dcedpfx Aow Ni Nref Ion Schwabbl cleaning unit Extendable roller support Compressed air: 6 bar Dimensions: 5400 x 1000 x 1400 mm Weight: 2300 kg

Condition: like new (used), Year of construction: 2019, I sell the edge banding machine Biesse Akron 1440A Year 2019. Configuration: Entry fence servomotoric adjustable Premilling pneumatic adjustable Edge banding servomotoric adjustable / 2 glue tanks for EVA and PUR glue Pressure zone manual adjustable Dcsdpfow Rl Utsx Af Isn End cutting saw pneumatic adjustable Tilting radius milling servomotoric adjustable Corner rounding unit 2-motor servomotoric adjustable Radius scrapers servomotoric adjustable Glue scrapers pneumatic adjustable Polishing brushes with spraying Hot air fan Separation fluid spraying front Central lubrication system Top feeding rolls Height adjustment servomotoric PUR glue possible 2nd set of premilling heads included in price Material height 10-60 mm Edge thickness 0,4-12,0 mm Feeding speed 18 m/min. Only 360.000 meters edgebanded. CE Mark. Including full documentation and CDs. Very good condition ! Available immediately !

Condition: used, Year of construction: 2007, Used Machine GM020.0068 AKV 3003 DK - F Year of manufacture: 2007 Specification: 3 mm Dcedpfxew Nih Io Af Isn 1st milling station: Combination Surface pull scraper with extraction Chassis Pneumatic milling adjustment Limit switch lever, 7.5° inclination

Condition: good (used), Year of construction: 2011, For sale is a first-hand used SMC edge banding machine in good condition. Manufacturer: SMC Year of manufacture: 2011 Type: Olimpic S 2000 "Model A" Weight 2000 kg Feed rate: 12-18m/min Working height (panel thickness): 8-60mm Edge thickness: 0.4mm - 6mm Dodpfx Afehf Aclj Iscn - Flush trimming unit - Snipping unit - Surface scraper - Rounding unit all data without guarantee, sale only to commercial customers. Inspection by appointment in Karlovarská 1415, 363 01 Ostrov, Czech Republic Collection in Ostrov (Czech Republic) or in 94424 Arnstorf (Germany)

Condition: used, Year of construction: 1980, Edge thickness: maximum 20mm Workpiece thickness: from 8mm - 60mm Workpiece width: minimum 60mm Glue application: cartridge Cut-off shears: yes Milling station 1: flush Infeed guide adjustment: manual Dcsdpfxewm Nrie Af Ijn Workpiece thickness adjustment: manual Power consumption: 7kW Machine length: 2.8m Machine width: 1.2m Weight: 800kg

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 1000023523, Biesse Stream B MDS 2.0/15.0 is a single-sided edge banding center with automatic device with manual feeding to dimension and square panels in flexible way bу 4 run. Main technical data Сhаin advance speed: 10-25 m/min Panel length: 250-2700 mm Panel width: 120-1200 mm Panel thickness: 10-60 Panel weight: 75 kg Edge thickness: 0,3-3,0 mm Gluing unit: PU gluing kit, installed in place of to the standard device(EVA). Djdpfxspz Shke Af Iocn The machine is equipped with a tool for processing edges with a radius R=1/1.5/2.0mm and a chamfer of 25 degrees. Technical condition: the machine is currently used in production.

Condition: new, Year of construction: 2021, scm me40 edge banding machine NEW 3.70 m long, 0.80 m deep and 1.40 m long Joining unit Dcjdpfx Ajhpy I Ujf Isn Device for 2nd heating of the flat edge Gluing Capping Anti-adhesive agent Spraying unit Flush sawing Milling radii Rounding corners Surfaces Scraper Radii Scraper Buffing Spraying device for finishing the edge Automatic application of strip edges Pick-up preferred, alternatively delivery against payment of costs via forwarding agent Price: 22900 € plus 19% VAT.

Condition: used, Year of construction: 2016, functionality: fully functional, overall weight: 450 kg, type of input current: three-phase, height adjustment type: mechanical, input voltage: 400 V, – Italian production – year of production 2016 – pre-milling – DTR, CE TECHNICAL PARAMETERS: – edge thickness: 0.5 - 3 mm – wooden edgeband: 0.5 - 5 mm – element height: 8 - 50 mm – minimum edgebanding length: 160 mm – minimum board width: 110 mm Dcsdpfxewb Ha Ts Af Ijn – feed speed: 7 m/min – pre-milling – radial cutters – edge cutting – radial scraper – straight scraper – blower for each unit – working pressure: 8 bar – working machine length: 2030 mm – transport dimensions (length/width/height): 330/80/125 cm – weight: 450 kg

Condition: used, Year of construction: 2018, Used machine GM020.0050 AKV 3005 DK - F Year of manufacture: 2018 Specification: 8 mm 1st milling station: Combination Pneumatic 3-point adjustment Cleaning station Corner rounding cutter Radius scraper station incl. lift Surface scraper PLC control incl. touchscreen Interchangeable tanks Nesting Dcjdpfx Afjw Nif Hj Ien Glue discharge 60 mm workpiece thickness (joining and corner milling) Spraying device for panels Edge protection spraying Short workpieces

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) with 5 axis (X-Y-Z-C-5th) for routering, boring, cutting and edge banding Numerical Control ICOS CNC (IMAWOP) Max useful working area (without edge banding) mm 4000 x 1600 (2000) x 100 (axe Z stroke mm 650) Max useful working area (edge banding process) mm 4000 x 1600 x 100 (panel thickness) No. 8 movable rails (supports) length mm 1400, LED displaying both the axe X and axe Y position Vacuum cups (with No. 2 vacuum pumps, capacity 140 m3/h each) Safety side metal grids and front emergency carpets Dedjw A Ruqepfx Af Iscn Motorized belt to evacuate the wastes from the working process No. 1 Vertical Electro-spindle ROBOTKOPF HSK F63 (Kw 16) Automatic Tools Changing System, with 18 folds (places) No. 21 Independent vertical boring spindles (4 x Kw 1,2) No. 8 Independent horizontal boring spindles (4 in X + 4 in Y) Circular Saw (tiltable 0°- 90°) diam. (mm) 200 Glueing Unit (P.U.R. Glue + Quick Melt unit 283.203) VT 100 / 100 WITH 45° INCLINED EDGE BANDING UNIT Edge coils supporting unit (No. 2 reels) OPTIONALS: No. 1 Aggregate Flush Milling / Trimming No. 1 Aggregate Flush-Trimming / Profile Scraping Unit

Condition: used, Year of construction: 2002, Used machine GM020.0043 AKV 3005 DK Year of manufacture: 2002 Specification: 8 mm Heated infeed ruler Second milling station Cleaning station Corner rounding cutter Profile scraper station Chassis PLC control with touchscreen Preparation for interchangeable tanks Dodew Nh Exspfx Af Iecn

Condition: used, Year of construction: 1999, Used machine GM020.0032 AKV 3005 DK Year of manufacture: 1999 Specification: 12 mm 2nd milling station Double-radius milling heads R = 2.5 Cleaning station Profile pull knife station R = 3 Djdjw Nh Awepfx Af Iscn Extraction device for second milling unit Extraction device for pull knife Chassis

Condition: used, Year of construction: 2005, Used machine GM020.0029 Year of manufacture: 2005 AKV 3005 DK-F 8 mm version 1st milling station: Combination Cleaning station Corner rounding cutter Jointing cutter Surface scraper with extraction Profile scraper Chassis Pneumatic milling adjustment SPS control Preparation for interchangeable tanks Dedpfsw In R Eex Af Ijcn