Used Eccentric for sale (963)

Condition: good (used), Machine data: Make / Model: Ter Hart Eccentric Press THEP25 Pgodpfxoxw Nm Ee Adnsw Machine number: 99302 Press capacity: 250 kN Number of strokes: 140 strokes/minute Adjustable stroke: 6 – 60 mm Adjustable ram: 35 mm Cutting capacity (at 400 N/mm²): 625 mm² Year of manufacture: 1999 Motor power: 1.5 kW Supply voltage: 3 x 400V / N / PE Operating air pressure: min. 0.55 MPa – max. 0.65 MPa Weight: 700 kg Origin: Riva B.V., Epe – Netherlands Included: CE marking Note: The information on this page has been obtained and compiled in good faith, but accuracy cannot be guaranteed. Accordingly, this does not constitute representation or contract and we advise you to verify all relevant details. Financial information VAT/margin: VAT/margin: VAT: The price shown is exclusive of VAT (VAT deductible for businesses).

Condition: good (used), functionality: fully functional, Eccentric press LE160 Pjdpfxsxw Iqpj Adnsgw maximum forming force 160 tons

Condition: used, Year of construction: 2008, pressure 63 t throat ca. 280 mm Pgodpfxsxu Nw Ss Adnew stroke 8-100 mm no. of strokes 60-130 Hub/min ram - range of adjustment 80 mm weight of the machine ca. 4,3 t

Condition: new, Year of construction: 2025, table width: 1,100 mm, table length: 2,200 mm, pressing force: 250 t, stroke adjustment: 120 mm, warranty duration: 24 months, stroke length: 200 mm, Equipment: safety light barrier, STANDARD FEATURES: • Steel Construction Body • Pneumatic Clutch Brake • T-Slot Additional Plate • 8-Guided Slide Ram • Adjustable Stroke on Single Connecting Rod • Balance Piston on Slide Ram • Fully Automatic Fine Lubrication System • PLC Control System • Piano-Type Control Panel • Touch LCD Screen • Motor Reverse Operation • Overload Hydraulic Safety Device • Motorized Ram Adjustment Mechanism • Light Curtain Safety Barrier • Gear Group in Sealed Oil Reservoir • Double-Coil Safety Valve • CE Compliance OPTIONAL FEATURES: • Press Feeding Systems • Scrap Ejection Systems • Sliding Cover for Table Front • 1 Set of Die TECHNICAL SPECIFICATIONS: CAPACITY: 250 TON USABLE AREA OF LOWER TABLE: 1100x2200 mm USABLE AREA OF UPPER TABLE: 1100x2200 mm FIXED STROKE LENGTH: 200 mm RATED TONNAGE: 7 mm STROKES PER MINUTE (SPM): 25 – 45 MAXIMUM CLOSED DIE HEIGHT: 600 mm MINIMUM CLOSED DIE HEIGHT: 480 mm SIDE WINDOW DIMENSIONS: 700x700 mm SLIDE ADJUSTMENT (RAM ADJUSTMENT): 120 mm NUMBER OF CONNECTING RODS: 2 units NUMBER OF CRANKSHAFTS (ECCENTRIC SHAFTS): 2 units SAFETY DEVICE: Hydraulic ELECTRICAL PANEL EQUIPMENT: Siemens - Schneider LUBRICATION SYSTEM: Automatic SCREEN – PLC – INVERTER: Siemens - Pilz Pgedpfx Asvtw Adodnow SAFETY BARRIER: Leuze OPERATION SYSTEM: 4-Position DIE MEMORY: 99 sets INSTALLATION TYPE: Floor Mounted BODY TYPE: Monoblock MOTOR POWER: 30 kW – IE3 MOTOR SPEED (RPM): 1450 APPROXIMATE MACHINE DIMENSIONS (L x W x H): 4750x3200x2200 mm APPROXIMATE WEIGHT: 32,000 kg

Condition: used, Year of construction: 1969, Technical details: pressure: 55 t throat: 250 mm no. of strokes: 120 Hub/min daylight dimension : table/slide up: 380 mm ram adjustment: 55 mm sheet thickness continuous stroke : 2,25 mm ram stroke range: 6 - 90 mm total power requirement: 8,8 kW Pjdpjxu Dwmsfx Adnegw weight of the machine approx.: 2,75 t dimensions L x W x H: 1,4 x 1,2 x 2,2 m

Condition: used, Year of construction: 1971, pressure 100 t distance between columns 400 mm stroke 20 - 140 mm table surface area 900 x 710 mm ram surface 560 x 450 mm ram adjustment 80 mm dayligth 470 mm Psdpfjxuv Htox Adnogw no. of strokes 70 Hub/min total power requirement 10,5 kW weight of the machine ca. 9 t dimensions of machine L x W x H 1,98 x 1,60 x 3,10 m

Condition: used, Eccentric Screw Pump 10 m³/h, Seepex, BN 10-6LS Item No.: Pum 4 Manufacturer: Seepex Model: BN 10-6LS Used, in good condition Stock: 1 Availability: immediately Flow rate: 10 m³/h Year of manufacture: 2020 Motor Manufacturer: Nord Power: 1.5 kW Voltage: 3 x 400 Volt Speed: 1415 rpm Eccentric Screw Pump 10 m³/h, Seepex BN 10-6LS Item No.: Pum 6 Manufacturer: Seepex Model: BN 10-6LS Item condition: unused, new Stock: 1 Availability: immediately Flow rate: 10 m³/h Year of manufacture: 2020 Motor Manufacturer: Nord Power: 1.5 kW Voltage: 3 x 400 Volt Speed: 1415 rpm Eccentric Screw Pump 10 m³/h, Netzsch, NM045BY Eccentric Screw Pump 6 m³/h, Netzsch, NM038BY Item No.: Pum 28 Manufacturer: Netzsch Model: NM038BY Podpfx Adexb Rvvsnogw Item condition: used Stock: 1 Availability: immediately Flow rate: 6 m³/h Delivery pressure: 3 bar Speed: 276 rpm Year of manufacture: 2019 Motor Manufacturer: Nord Power: 0.88 kW Voltage: 3 x 400 Volt

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, We are offering a beautiful eccentric press from Schuler/Beutler Nova AG, model CFL63c C-frame. The machine is under power, ready for demonstration and can be tested on site. It is suitable for both safeguarded and non-safeguarded tools. Technical data and information: Year of manufacture: 2020 Control system: CCS/PNOZmulti Rated power: 4 kW Rated force: 630 kN Working energy (J): 2750 Max. strokes in continuous operation (min-1): 30 - 120 Max. strokes in single stroke mode (min-1): 60 Pgsdext Nxtepfx Adnsw Table dimensions: 820 x 590 mm Ram dimensions, max. tool size: 470 x 415 mm Ram bore Ø: 50 mm Max. weight of upper tool (kg): 200

Condition: good (used), Manufacturer: WEINGARTEN Type: ER 125 Table size: 800x620 mm A small crack is visible on the load-bearing part of the press; it has been used this way for years. !! Psdpfx Adjn D Ebajnsgw

Condition: new, Year of construction: 2025, table width: 900 mm, table length: 1,800 mm, pressing force: 150 t, stroke adjustment: 120 mm, warranty duration: 24 months, stroke length: 200 mm, Equipment: safety light barrier, STANDARD FEATURES: • Steel Construction Body • Pneumatic Clutch Brake • Additional T-Slot Plate • 8-Bearing Ram • Adjustable Stroke on Single Connecting Rod • Balancer Piston in Ram • Fully Automatic Fine Lubrication System • PLC Control System • Piano-Type Control Panel • Touch LCD Screen • Motor Reverse Function • Overload Hydraulic Safety Device • Motorized Ram Adjustment Mechanism • Photoelectric Safety Guard • Enclosed Gear Group in Oil Reservoir • Double Coil Safety Valve • Compliance with CE Standards OPTIONAL FEATURES: • Press Feeding Systems • Scrap Ejection Systems • Sliding Cover in Front of Table • Custom Dies as per Request Pedpevtwztjfx Adnegw TECHNICAL SPECIFICATIONS: CAPACITY: 150 TON USABLE LOWER TABLE DIMENSIONS: 900X1800 MM USABLE UPPER TABLE DIMENSIONS: 900X1800 MM FIXED STROKE LENGTH: 200 MM NOMINAL TONNAGE: 7 mm STROKES PER MINUTE (SPM): 60 MAXIMUM SHUT HEIGHT (CLOSED DIE HEIGHT): 500 MM MINIMUM SHUT HEIGHT (CLOSED DIE HEIGHT): 380 MM SIDE WINDOW WIDTH: ?? ADJUSTMENT (RAM ADJUSTMENT): 120 MM NUMBER OF CONNECTING RODS: 2 PCS NUMBER OF ECCENTRIC SHAFTS (CRANKSHAFTS): 2 PCS SAFETY DEVICE: HYDRAULIC PANEL COMPONENTS: SIEMENS - SCHNEIDER LUBRICATION SYSTEM: AUTOMATIC SCREEN – PLC – INVERTER: SIEMENS - PILZ SAFETY BARRIER: LEUZE OPERATION MODE: 4 POSITIONS DIE MEMORY: 99 PCS INSTALLATION TYPE: FLOOR-MOUNTED BODY TYPE: MONOBLOCK MOTOR POWER: 22 kW MOTOR SPEED (RPM): 1450 APPROXIMATE MACHINE SIZE (L x W x D): 4500x3000x2000 mm APPROXIMATE WEIGHT: 20 TON COUNTRY OF ORIGIN: TURKEY

Condition: excellent (used), functionality: fully functional, three-jaw chuck diameter: 160 mm, Three-jaw chuck eccentric – clamping chuck 1 piece used, very well-preserved Horvath Fischer eccentric clamping chuck (three-jaw chuck) with a diameter of 160 mm, maximum adjustable eccentricity: 25 mm, chuck mounting cylindrical diameter 150 mm, supplied with chuck key and a set of hardened stepped jaws, as well as the assembly and operating manual for the Horvath eccentric clamping chuck in what is presumably the original wooden case (Hahn & Kolb). Year of manufacture unknown. From our own inventory. Pgsdpeg Umb Esfx Adnsw Eccentric lathe chuck for clamping workpieces in a lathe. Price / details on request. All technical details are subject to error or typographical mistakes. Sales exclusively to countries within the European Community.

Condition: used, functionality: fully functional, DGUV certified until: 02/2022, Eccentric press Künstner & Hampel, used. The machine is fully functional; however, the ram rod has been welded (see photo). Pjdpfx Aexv R Uhodnsgw

Condition: good (used), Manufacture: Digép Type: SD63 Push force: 63t Table: 560 x 740 mm Pgodpsiukrrofx Adnjw Stroke length: 200 mm Net weight: 4t

Condition: new, Year of construction: 2025, table width: 1,000 mm, table length: 2,000 mm, pressing force: 200 t, stroke adjustment: 120 mm, warranty duration: 24 months, stroke length: 200 mm, Equipment: safety light barrier, STANDARD FEATURES: • Steel Construction Body • Pneumatic Clutch Brake • Additional T-Slot Extension Plate • 8-Guided Slide/Ram • Adjustable Stroke on Single Connecting Rod • Balancer Piston on Slide/Ram • Fully Automatic Thin Oil Lubrication System • PLC Control System • Piano-Type Control Panel • Touchscreen LCD Display • Reverse Motor Motion • Overload Hydraulic Safety Device • Motorized Ram Adjustment Mechanism • Light Curtain Safety Guard • Enclosed Gear Group in Oil Reservoir • Dual Coil Safety Valve • Compliance with CE Standards OPTIONAL FEATURES: • Press Feeding Systems • Scrap Discharge Systems • Sliding Cover in Front of Table • 1 Set of Dies TECHNICAL SPECIFICATIONS: CAPACITY: 200 TON USABLE LOWER TABLE AREA: 1000 x 2000 mm Pgsdpsvtwz Tjfx Adnow USABLE UPPER TABLE AREA: 1000 x 2000 mm FIXED STROKE LENGTH: 200 mm RATED TONNAGE: 7 mm STROKES PER MINUTE (SPM): 25 - 45 MAX. CLOSED DIE HEIGHT: 600 mm MIN. CLOSED DIE HEIGHT: 480 mm SIDE WINDOW OPENING: 600 x 600 mm ADJUSTMENT (RAM ADJUSTMENT): 120 mm NUMBER OF CONNECTING RODS: 2 NUMBER OF ECCENTRIC SHAFTS (CRANKS): 2 SAFETY DEVICE: HYDRAULIC PANEL SWITCHGEAR: SIEMENS – SCHNEIDER LUBRICATION SYSTEM: AUTOMATIC SCREEN – PLC – INVERTER: SIEMENS – PILZ SAFETY BARRIER: LEUZE OPERATING MODES: 4 POSITIONS DIE MEMORY: 99 SETS INSTALLATION TYPE: FLOOR MOUNTED BODY TYPE: MONOBLOCK MOTOR POWER: 22 kW – IE3 MOTOR SPEED (RPM): 1450 APPROXIMATE MACHINE DIMENSIONS (L x W x H): 4600 x 3000 x 2000 mm APPROXIMATE WEIGHT: 28,000 kg Country of Origin: Turkey

Condition: like new (used), Year of construction: 1991, functionality: fully functional, overall weight: 35,000 kg, pressing force: 250 t, type of input current: three-phase, power: 30 kW (40.79 HP), punching force: 250 t, input voltage: 200 V, Equipment: safety light barrier, AIDA NC2-250(1) 250t eccentric press in excellent condition /ctA2/ Manufacturer: AIDA Type: NC2-250(1) Push force: 160t Year of manufacture: approx. 1991 Stroke length: 170mm Distance above table: (adjustable) 280-400mm Table size: 2700x760mm Bear size: 2100x700mm Electrical power: 3x200V(!!), 30kW - Japanese standard Podpfx Aou Dxb Todnegw Net weight: 35000kg Size: 2760x2800x3980mm Automatic greasing system. Automatic cutting oil dosing - RAZIOL EST-02 Optionally with disc winder and straightener.

Condition: like new (used), Year of construction: 1991, functionality: fully functional, overall weight: 19,000 kg, pressing force: 160 t, type of input current: three-phase, power: 15 kW (20.39 HP), punching force: 160 t, input voltage: 200 V, Equipment: safety light barrier, Manufacturer: AIDA Type: NC2-160 Push force: 160t Year of manufacture: approx. 1991 Stroke length: 130mm Distance above table: (adjustable) 235-335mm Table size: 2030x600mm Bear size: 1500x600mm Electric power: 3x200V(!!), 15kW - Japanese standard Net weight: 19000kg Size: 2140x2210x3175mm Automatic greasing system. Automatic cutting oil dosing - RAZIOL EST-02 Pgedou D Ad Espfx Adnsw Optionally with sheet feeder and straightener.

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, ram adjustment: 90 mm, table width: 900 mm, table length: 550 mm, overall weight: 6,150 kg, pressing force: 60 t, type of input current: three-phase, power: 5.5 kW (7.48 HP), compressed air connection: 5 bar, warranty duration: 5 months, input voltage: 200 V, year of last overhaul: 2021, Equipment: documentation/manual, Amada TP 60C-X2 Eccentric press with air clutch for sale in new condition Year of manufacture: 1983 pressing force 60t two-handed operation central fattening Pjdpfou Haqhsx Adnsgw stroke length: 90mm number of strokes: 65-100/min table-bear distance: 275mm stroke adjustability: 80mm table size: 900x550mm bear size: 500x400mm total response time: 175ms voltage: 200v 50Hz 5.5kw machine weight: 6350 kg

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, table height: 360 mm, table width: 810 mm, pressing force: 45 t, Manufacturer: AIDA Type: NC1-45 Psdsu Dkc Ajpfx Adnogw Pressure: 45t Year of manufacture: 1987.08. Stroke length: 80mm Distance above table:: (adjustable) 240-300mm Table size: 810x360 Bear size: 410x340 Electrical power: 3x200V(!!), 5.5kW - Japanese standard Net weight: 3300kg Size: 980x1480x2275mm

Condition: like new (used), Year of construction: 2017, functionality: fully functional, table width: 500 mm, table length: 900 mm, stroke adjustment: 75 mm, overall weight: 5,600 kg, pressing force: 60 t, stroke length: 150 mm, power: 5.5 kW (7.48 HP), input voltage: 220 V, Equipment: documentation/manual, safety light barrier, APA 60 ton eccentric press with air clutch for sale in mint condition Manufacturer: HE Shenzhen HONG-ER Machine LTD type: APA 60 Year of manufacture: 2017 Pedpfxeu Hav Rs Adnsgw pressing force 60t two-handed operation central fattening required air pressure: 6 bar stroke length: 150mm number of strokes: 35-90/min table-bear distance: 300mm stroke adjustability: 75mm table size: 900x500mm bear size: 500x360mm total response time: 170ms voltage: 220v 50Hz 5.5kw machine weight: 5600 kg

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, overall weight: 19,000 kg, pressing force: 160 t, height adjustment type: electric, power: 11 kW (14.96 HP), input voltage: 200 V, Equipment: documentation/manual, safety light barrier, Manufacturer: AIDA Type: NC2-160 Push force: 160t Year of manufacture: approx. 1991 Pjdpju D Dhxefx Adnegw Stroke length: 130mm Distance above table: (adjustable) 285-335mm Table size: 1900x600mm Bear size: 1360x585mm Electric power: 3x200V(!!), 15kW - Japanese standard Net weight: 19000kg Size: 2140x2210x3175mm Automatic greasing system. Optionally sheet feeder winder and straightener.

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, pressing force: 150 t, compressed air connection: 6 bar, input voltage: 200 V, Equipment: safety light barrier, Manufacturer: AMADA Type: TP-150C-X2 Pressure: 150t Year of manufacture: 1986 Stroke length: 175mm Distance above table: (adjustable) 230-330mm Table size: 1250x750mm Bear size: 700x550mm Electrical power: 3x200V(!!), 11kW - ​​Japanese standard Net weight: 16326kg Automatic greasing system. Pgedpfju Dw U Ssx Adnew Optionally with disc winder and straightener.

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, table width: 1,000 mm, table length: 600 mm, overall weight: 8,160 kg, pressing force: 80 t, stroke length: 100 mm, input voltage: 200 V, year of last overhaul: 2021, Amada TP 80C-X2 Eccentric press with air clutch for sale in new condition Year of manufacture: 1983 Pedpju E U Nijfx Adnsgw pressing force 80t stroke length: 100mm number of strokes: 60-100/min table-bear distance: 310mm stroke adjustability: 80mm table size: 1000x600mm bear size: 590x450mm sudden stop time: 195 ms maximum downtime 215ms machine weight: 8160 kg

Condition: like new (used), Year of construction: 2017, functionality: fully functional, ram adjustment: 75 mm, table width: 500 mm, table length: 900 mm, stroke adjustment: 75 mm, overall weight: 5,600 kg, pressing force: 60 t, stroke length: 150 mm, power: 5.5 kW (7.48 HP), input voltage: 220 V, Equipment: safety light barrier, APA 60 ton eccentric press with air clutch for sale in mint condition Manufacturer: HE Shenzhen HONG-ER Machine LTD type: APA 60 Year of manufacture: 2017 pressing force 60t two-handed operation central fattening Inovance IT600 control required air pressure: 6 bar stroke length: 150mm number of strokes: 35-90/min table-bear distance: 300mm stroke adjustability: 75mm table size: 900x500mm bear size: 500x360mm total response time: 170ms Pgodpfx Adou Hautenow voltage: 220v 50Hz 5.5kw machine weight: 5600 kg

Condition: good (used), functionality: fully functional, DIGÉP SD25 tilting round press, eccentric press machine 25t Pgsdpetrww Ejfx Adnow Manufacturer: DIGÉP Type: SD-25 Table: 380 x 515 mm Stroke length: 10-90mm Weight approx. 1.9t

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, table width: 680 mm, table length: 1,070 mm, stroke adjustment: 90 mm, overall weight: 9,600 kg, pressing force: 110 t, stroke length: 180 mm, type of input current: three-phase, power: 7.5 kW (10.20 HP), punching force: 110 t, warranty duration: 6 months, year of last overhaul: 2020, Equipment: documentation/manual, AIDA NC1-11 110 ton eccentric press with air clutch for sale in mint condition Manufacturer: AIDA Engineering type: NC1-11 (2)-b Year of manufacture: 1988 pressing force 110t two-handed operation central fattening required air pressure: 5 bar stroke length: 180mm number of strokes: 35-65/min table-bear distance: 450mm stroke adjustability: 70mm table size: 1060x680mm bear size: 630x520mm total response time: 170ms voltage: 200v 50Hz 7.5kw Psdpfou Har Eox Adnogw machine weight: 10884 kg