Used Duble Spindle for sale (12,410)

Condition: used, used Cleaned, functionality tested, test run performed, partially refurbished 16 A cable installed Belt renewed Runout measured New wooden jaws attached Pjdpey Ay Awofx Ac Esgr Manufacturer: Bäuerle Type: SFM Motor: 4, 5.5 hp Motor: 2 speeds/pole-switchable 6 speed levels: 2800 / 4500 / 6000 / 5600 / 9000 / 12000 Foot brake Right-left rotation Spindle diameter: 30 + 40 mm Table size: 1100 x 900 mm Wooden stop jaws: new Belt: new Milling stop with fine adjustment Space requirement: approx. 1000 x 900 x 1000 mm Weight: approx. 600 kg Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty or guarantee.

Condition: used, with spindle adjustment depth in the tablesecond handMake SchneiderType SK2 / 8SMachine no. 80002Motor 4.5 / 5.5 kWmotorized brake electronically6 speed levels 3000/4000/5000/6000/8000/10000 rpm.Right-left runMilling arbor diameter 30 mmTable top extension approx. 2 x 450 mmMilling fence with fine adjustmentControl panel aboveSocket for feederExtraction connection D 100/120 mmRequired space approx. 2100 mm x 1300 mm x 1800 mmTotal connected load 5.5 kWStorage location 97447 Gerolzhofen, free on truck, unpackedHandover in the current condition as viewed,without guarantee and warranty Pjdpfxevwf Ice Ac Esgr

Condition: ready for operation (used), Year of construction: 2002, operating hours: 63,040 h, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Machine configuration Pgedpfxezrgnps Ac Esr Upper linear slides: 2 units Milling unit: 1 unit Transverse drilling units: 2 units Rigid front spindle: 1 unit Machining units Drum 6: Movable only in the X-axis Front position 1: Rotationally rigid spindle, movable only forwards and backwards Front positions 2 to 4: Rotationally fully controllable spindles Front position 5: Internal machining axis for processing internal contours and radii Front position 6: Driven indexing spindle with rear machining slide and two tools, movable towards the viewing side Full electronic equipment Electronically connectable auxiliary drives on the front positions and six drum slides MACHINE DETAILS Operating hours: 98,119 h Spindle hours: 63,040 h EQUIPMENT Chip conveyor High-pressure coolant unit Bar loader Milling unit Two transverse drilling units Collets Spare parts Electronic components for the control cabinet New rigid front spindle

Condition: used, Year of construction: 1959, machine/vehicle number: 1727, Offer 24177 Technical data: - Center height 180 mm - Center distance 1000 mm - Larger swing – Ø over bed 355 mm - Over cross slide approx. 200 mm - Spindle bore 36 mm - Taper of tailstock quill MK 5 - Travel of tailstock quill 260 mm - Spindle speeds 18 - 1800 rpm - Feeds - Travel of cross slide approx. 200 mm - Travel of top slide approx. 115 mm - Drive 400 V / 5.8 kW - With: - Tailstock, 3-jaw chuck, steady rest - Steel holder, live center, Pjdpfx Ajv Hckgoc Eogr - Chip tray - Space requirement approx. W 2500 x H 1500 x D 1200 mm - Weight approx. 2100 kg

Condition: good (used), Year of construction: 2000, machine/vehicle number: 8073, Offer 25432 Technical specifications: - Swing diameter: 320 mm - Distance between centers: 750 mm - Maximum turning diameter over bed: 550 mm - Maximum turning diameter over cross slide: 175 mm - Spindle bore: 32 mm - Spindle mount: - Tailstock quill taper: MT 3 - Quill stroke: 180 mm - 18 spindle speeds: 85 - 2000 rpm - Longitudinal and cross feeds - Metric thread pitches - Imperial thread pitches Pgsdpfsxx Sp Eex Ac Eer - Module threads - Diametral pitch threads - Quick-change tool post - Chuck - Steady rest - Drive: 400 V / 2.2 kW - Required space (approx.): W 2100 x D 750 x H 1300 mm - Weight (approx.): 750 kg

Condition: used, spindle passage 25 mm turning speeds 5750 U/min Rest 4 turret head 8 bar loader LNZ Hydrobar type 6.26HS-4.4 Parts catcher The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, Pgedpfoyquqqox Ac Ejr please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, worktable: 870 mm x 560 mm spindle diameter: 35 mm maximum tool diameter: 180 mm spindle overhang from the worktable: 155 mm Pgjdpfxoznllro Ac Eer 3-roller feed mechanism three-phase

Condition: excellent (used), Year of construction: 2003, WELL-MAINTAINED MACHINE FROM A HOBBY WOODWORKING SHOP Table dimensions: 990 x 750 mm Router spindle diameter: 30 mm Router spindle speed: 3,700 / 6,500 / 7,890 RPM Diameter of router tool, max.: 230 mm Router spindle can be tilted: 0 - 45 degrees Router spindle height above table, max.: 120 mm Motor: 5.5 kW Router spindle can be switched for clockwise/counterclockwise rotation Sliding table with additional table support Additional extraction hood as a replacement for the fence, e.g., for sanding Hold-down device / safety system, e.g., when routing narrow parts Weight: approx. 540 kg Pedpeznk Ilsfx Ac Eogr Dust extraction connections: 1 x 120 mm, 1 x 80 mm Optionally available: 3-roller feed device FELDER F-34, item no. 4754

Condition: used, functionality: fully functional, travel distance X-axis: 3,650 mm, travel distance Y-axis: 2,800 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 10 m/min, total height: 3,300 mm, total width: 8,800 mm, total length: 6,600 mm, table width: 2,200 mm, table length: 4,000 mm, overall weight: 10,500 kg, cutting length (max.): 3,500 mm, cutting width (max.): 2,000 mm, CNC cutting line with two interpolated 5-axis spindles, mounted on two opposing independent beams, with a belt table, for full-depth or incremental cuts on marble, granite, engineered stone and similar workpieces. Pgjdpfxexdi Agj Ac Eor

Condition: good (used), Code: 0318 Brand: BIESSE Model: F 39 E - CE Standard Electronic multiple boring machine with 39 spindles for furniture, carpentry, custom-made furnishings, panels, kitchens, bathroom furniture, doors,window frames, and various - CE Standard Suitable for horizontal and vertical drilling, any intermediate drilling between 0 and 90° can be performed thanks to a gear motor and handwheel. Electronic control Technical data: N° 39 spindles Spindle rotation speed 4000 rpm Center distance between spindles 32 mm Max drilling center distance 1216 mm Drilling depth 65 mm Drilling head motor power 2,3 + 2,3 Hp Air operating pressure 6 bar Installed electrical power 4,1 Kw Overall dimensions mm 1800 x 1140 x 1600 h Weight kg 700 MACHINE SOLD UNDER THE CONDITIONS IN WHICH IT IS FOUND NOT RECONDITIONED Pgjdpfxjy Tt Rpe Ac Ejr

Condition: used, Cutter SCM Psdpfx Asuzivpjc Eegr

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, For sale is a Felder F 700 table router in high-quality industrial design, including a Felder F38 3-roller feed system. The machine impresses with its robust construction, powerful drive, and precise adjustment options, making it ideal for professional use in carpentry and joinery workshops. Technical data: Manufacturer: Felder Type: F 700 Year of manufacture: 2012 Motor power: 7.35 kW Voltage: 400 volts Frequency: 50 Hz 3-phase design Router spindle adjustable by 45° Electronic height adjustment with digital display (mm/inch) Speed levels: 3,500 / 6,500 / 8,000 / 10,000 rpm Made in Austria Equipment: Felder 3-roller feed system F 38 Swivel and height-adjustable feed system Sliding table Table extension Solid aluminum router fence Pgedpfozm Rzijx Ac Esr Precise router fence adjustment Large cast iron table Digital display for router height Swivel indicator for the router spindle Emergency stop switch Professional industrial design The machine is in good used condition and shows only the usual signs of wear and tear due to age and use. It is ideally suited for daily professional use. An inspection and test run are possible at any time by appointment. Transportation is possible for an additional charge! The machine will be inspected before sale. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: ready for operation (used), Fanuc stator for A06B-1401-B105 AC spindle motor, serial number C189SB412, used, in good condition, 100% functional, scope of delivery as shown in the photos. Pjdpfozm D Atjx Ac Ejgr

Condition: used, Year of construction: 1998, overall weight: 80 kg, Equipment: type plate available, Spindle motor SJ - 11AW - 4M Mitsubishi Year of manufacture: 1998 Weight: 80 kg Nameplate available AC spindle motor, made in Japan, Mitsubishi Electric 4-pole, 3-phase, AMP input 200-230V, 50/60Hz, IP 44 Frame B112FU IEC 34-1 1994, Manual No. BNP-B3759 Ambient temperature: 0-40°C Psdpfx Aozq Atlsc Esgr The motor was installed on a Mazak machine. Price: negotiable Our asking price is €1,950.00 net, ex works, plus packaging costs. All technical data subject to typographical errors and errors. Sale exclusively to countries within the EU.

Year of construction: 2006, condition: good (used), 1087/5000 Complete Desoutter screwdriver system consisting of: 2 x Transducer controlled angle screw spindles Desoutter EML51-20J Pgedpfsdcmdlex Ac Eer Art.Nr .: 6151650640 Torque range: 30 to 135 Nm Output: 1/2 " Number of revolutions. 403 min-1 Length: 166 mm Diameter: 51.2 mm 1 x screw control Desoutter MODCVI-2 (= rack version of TWINCVI-2) with transformer. Art.Nr .: 6159325210 Screw - on cable: 2 Number of screw cycles per channel: 250 Number of phases in a screw cycle: 20 IO Sum counter: 99 Screwdriving Bins: Moment + Angle + Date + Time + Result + (bar code): up to 11600 Screws: 6 Possible screw strategies: Torque control with angle control Rotation angle control with torque control Dremoment- / Drehwinkelsteuerung Torque control with rotation angle and gradient control Rotation angle control with torque and gradient control Stretch control Hold torque / position Friction torque test Electricity compatibility 1 x motor cable 5 m length Art.Nr .: 6159171120 1 x Sensor cable length 5 m Art.Nr .: 6159171220 Including operating instructions

Condition: used, Year of construction: 1989, functionality: unexamined, machine/vehicle number: 8933292, Used machine, comes with many tools and spare parts. Cannot be tested. Pickup only. Pgodpfxjzqu Afj Ac Ejr

Condition: used, functionality: unexamined, Ferwood Code: RU0005199 - Manufacturer Code: 4-075-03-0280 - Condition: Used - Functionality: Not tested - Compatible Machine: CNC HOMAG - If interested, we offer a refurbishment service; please contact us. Pgedpfxozmibus Ac Eor

Condition: used, functionality: unexamined, Ferwood Code: AGG0215 - Manufacturer Code: 2-017-95-5550 - Condition: Used - Functionality: Not tested - Compatible Machine: CNC HOMAG - WEEKE - If interested, we offer a reconditioning service; please contact us. Psdozmht Aspfx Ac Eegr

Condition: new, Technical data: Spindle diameter: 35 mm Spindle height: 140 mm Revolutions: 1300/2500/3500/5000/6000/8500 rpm electric spindle height adjustment Spindle lock Working table dimensions: 700x1200 mm Adjustable culagi arms Engine power: 4 kW Power supply: 380 V Producer: Paoloni Overall dimensions: Length: 1,200 mm Width: 850 mm Pgedpfx Aehp N Nbjc Esr Height: 1340 mm

Condition: ready for operation (used), Year of construction: 2002, Professional, heavy-duty version by HANG (German quality) in neat, complete condition. Highly suitable for binderies, printing shops, and print departments. ⸻ Specifications • Brand / Model: HANG 107-30 electronic • Serial number: 102553 • Year of manufacture: 2002 • Number of drilling heads: 4 pieces, individually adjustable • Electronic control, automatic drilling cycle • Power connection: 400V – 50Hz – 6A • CE certification present • Cast iron frame, extremely robust construction • Manual and automatic operation • Adjustable stops with fine adjustment • Machine is mounted on swivel casters (easily movable) ⸻ Condition • Removed from production in working order • Drill spindles and guides run smoothly • No damages, normal signs of use • Immediately ready for operation • Complete, as shown in the photos ⸻ Description The HANG 107-30 is one of the most robust paper drilling machines on the market. Heavier-duty and more professional version than the standard models, thanks to the sturdy drilling heads, automatic drilling cycle, and reliable electronic control system. Perfect for calendar production, book blocks, brochures, index tabs, and more. ⸻ Price 👉 € 3,250 net (0% VAT export possible) Pjdpfx Acex A Izls Eegr

Condition: used, Spindelpresse / Spindle Press Tränklein SP Podpfx Aezl Th Aec Eogr Spindle Press Tränklein SP Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, machine/vehicle number: 1717, Used lead and feed screw lathe WEILER PRAKTIKANT Centre height: 140 mm Distance between centres: 500 mm Spindle bore: 36 mm Spindle speeds: 42–2,000 rpm Pedpfxjuqb Emo Ac Esgr Equipped with RSF 3-axis digital readout, 1 pc 3-jaw chuck Ø160 mm, Chuck guard electrically interlocked, With Multifix toolpost size A with 3 holders Lever-operated collet device with 15 collets. The machine is located at our facility in 71334 Waiblingen-Beinstein and is immediately available. Viewing of the machine is possible by prior arrangement.

Condition: good (used), Year of construction: 1993, functionality: limited functionality, power: 11 kW (14.96 HP), spindle diameter: 30 mm, total length: 2,600 mm, Planed cast iron table Table length 2600 mm Motorized height and swivel adjustment Swivel range -5° to +45° Feed unit Pgodpfxjzp I Ekj Ac Ejr 4 speeds 3/4/6/9000 rpm Adjustment range of the milling cutter arbor 150 mm Aigner stop jaws The machine is in very good condition Motor brake defective Digital display defective

Condition: used, functionality: fully functional, Distance between centers: 450 mm Center height: 120 mm Spindle bore: 23 mm Speed: 30 – 3000 rpm Tailstock: MT 2 Drive power: 1.5 kW Weight: 350 kg Pedpfxswcxf De Ac Ejgr Dimensions: 1200 x 650 x 1330 mm Paint finish: Reseda green RAL 6011. Digital display: Available upon request for an additional charge. Accessories: Additional accessories available upon request! We are also happy to offer this machine completely overhauled!

Condition: like new (used), Year of construction: 2015, spindle diameter: 30 mm, pivoting range: 130 °, actuation type: electric, rotational speed (max.): 3,000 rpm, rotational speed (min.): 10,000 rpm, total length: 1,000 mm, total width: 1,000 mm, total height: 1,200 mm, Equipment: CE marking, documentation/manual, SCM Formula T60I Undercut Spindle Moulder | Spindle Tilt | 2015 – LIKE NEW! SCM Formula T60I Undercut Spindle Moulder | Spindle Tilt | 2015. For sale: a professional SCM Formula T60I undercut spindle moulder from the renowned Italian manufacturer, SCM Group. This machine, manufactured in 2015, is designed for demanding carpentry and production applications. Its robust construction, weighing 624 kg, ensures stable operation and high machining accuracy. TECHNICAL SPECIFICATIONS: - Spindle tilt from 90° to 135° - Smooth spindle speed adjustment from 3,000 to 10,000 rpm - Powerful 5.5 kW motor - Solid cast iron worktable - Professional design for continuous operation - Precise adjustment settings - Machine ready for operation - Machine tested (video of the machine in operation available on TikTok and YouTube – jbsmaszyny) Technical data: Manufacturer: SCM Group Model: Formula T60I Year of manufacture: 2015 Power supply: 400 V Motor power: 5.5 kW Spindle speed: 3,000 – 10,000 rpm Spindle tilt: 90° – 135° Weight: 624 kg You can test the machine on-site. Pgodpfjzp Hx Nox Ac Ejr Financing options available through leasing or installments. WE ORGANIZE TRANSPORT. WHERE CAN YOU SEE OUR MACHINES? JBS STOLARSKIE MACHINES WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl